These Forgefix Pozidriv Self-Tapping Screws are zinc plated for increased resistance to corrosion. Their Pan Head, with a flat under head surface makes the screw ideal to lay flat on sheet material of all types, thus reducing deformation. The screws tap their own thread in a pre-drilled pilot hole, in sheet metal. The screws are single threaded to resist pull-out. APPLICATIONIdeal for use in many DIY, ironmongery, engineering, electrical and plumbing applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver.Self Tapping Screw Pozi Pan Head ZP 1.1/2 x 8 Box 200
These ForgeFix traditional slotted, twin thread Wood Screws have countersunk heads and can be used in many internal and external applications. They have a solid brass construction to avoid corrosion. APPLICATION:Used for both decorative applications and in applications where the screw may come in to contact with the elements avoiding corrosion. Can be used with all manner of wall plugs. Slotted screw driver required. With Slotted screwdrivers it is important to ensure that the tip matches the width of the screw slot, otherwise you run the risk of damaging the screw head. Slotted screwdrivers are available with either Flared or Parallel tips. For the majority of uses the Flared tip is ideal but if the screw needs to be driven below the material surface a Parallel tip screwdriver should be used. Raised head screws have both countersunk and raised structure, which is designed for aesthetic purposes on all types of ironmongery and lighting applications. The single threads have been designed to offer higher pull out values and quicker insertion.Wood Screw Slotted Raised Head ST Solid Brass 1 x 8 Box 200
The DEWALT Plunge Saw Blades with an alternate top bevel for fine cutting in wood. They feature lasercut expansion slots that reduce noise and vibration. With extra large sub micro grain carbide teeth remain sharper for much longer. The corrosion resistant carbide extends cutting life, even in extreme materials. Size: 165 x 20mm Bore.The DEWALT DT1091 Plunge Saw Blade has the following specification: Size: 165 x 20mm Bore.Tooth: 40 Teeth 2.0mm POS +5°.
These Forgefix Through Bolts (also known as Wedge Anchors or Toothless Anchors) have a Zinc Yellow Passivated finish for durability and corrosion resistance. They are through-fixing, and extremely economical and quick to install. APPLICATIONIdeal for fixing brackets, cladding, restraints, racking, fabricated stairwells and industrial doors.Ensure the correct socket drive or spanner is used to ensure accurate installation. The Zinc Yellow Passivation process of electroplating is similar to the Galvanised and Zinc Plated processes but with the addition of a yellow dye. It provides a coating that is aesthetically pleasing, and which offers excellent resistance to corrosion.Through Bolt Zinc Yellow Passivated M8 x 115 Bag 10
These Forgefix extra large Clout Nails have a larger head, which distributes the load directly underneath the top of the nail, ensuring that roofing felt stays firm and secure. This reduces the risk of tearing. The nails are galvanised for increased resistance to corrosion.Suitable for roofing of all types. APPLICATION:Specifically used when roofing felt is being fitted to either shed or smilar types of roofs. Galvanisation is process of applying a protective zinc coating to steel in order to prevent rusting. Zinc coatings prevent corrosion of the protected metal by forming a physical barrier, and by acting as a sacrificial anode even if this barrier is damaged.Clout Nail Extra Large Head Galvanised 30mm Bag Weight 500g
These Forgefix extra large Clout Nails have a larger head, which distributes the load directly underneath the top of the nail, ensuring that roofing felt stays firm and secure. This reduces the risk of tearing. The nails are galvanised for increased resistance to corrosion.Suitable for roofing of all types. APPLICATION:Specifically used when roofing felt is being fitted to either shed or smilar types of roofs. Galvanisation is process of applying a protective zinc coating to steel in order to prevent rusting. Zinc coatings prevent corrosion of the protected metal by forming a physical barrier, and by acting as a sacrificial anode even if this barrier is damaged.Clout Nail Extra Large Head Galvanised 30mm Bag Weight 2.5kg
Discover the reliability of Unifix Grade 10.9 Socket Button Head Screws, designed to meet ISO 7380-1 standards. These screws are perfect for a variety of fastening applications, ensuring a secure fit every time.
High Strength: Grade 10.9 steel provides exceptional tensile strength.
Corrosion Resistant: Bright Zinc Plated finish offers protection against rust and wear.
Easy Installation: Socket head design allows for quick and efficient fastening.
Versatile Use: Ideal for both DIY projects and professional applications.
Standard Compliance: Manufactured to ISO 7380-1 specifications for quality assurance.
Quantity: Box of 200 screws.
METALMATE® Type A Plain Washers are bright zinc plated for a longer-lasting finish. They spread a load and prevent damage to the surface being fixed, or provide some sort of insulation. These quality-assured fasteners are suitable for use in engineering, production, construction, repair and maintenance. Hardness HV 140-250 Washers.Standard: DIN 125. Quality assurance is extremely important to the METALMATE® brand. The entire purchasing and logistics process complies with international standards. All METALMATE® products are sourced from accredited manufacturers to ensure that only the highest quality threaded fasteners are supplied. Our supply chain partners are subject to regular audits to ensure compliance, overall service quality and timely order fulfilment. We also insist on routine assessments so the ownership of the factory does not threaten the integrity of METALMATE®. These strict quality procedures help us to be more efficient, improve product standards and deliver excellent customer service.
These METALMATE® Type A Washers have the following specification:Size: 10mm Finish: Bright Zinc PlatedBox Quantity: 100
The STANLEY Essential Workbench is ideal for trades people who require a versatile, portable working surface. It comes with an integral accessories tray for convenient storage of small parts. Its space-saving design enables the worktop to be folded for compact storage and easy transportation. The worktop provides full clamping coverage and features an automatic worktop locking mechanism for added durability and safety. Capacity: Max. Load: 320kg.Folded Dimensions: 85 x 30.3 x 16cm.Open Dimensions: 85 x 59.3 x 73.9cm.Weight: 6.7kg.
Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 2.8 Length 50 Collation Angle 28 DegreesSKU S28050 Profile STICK Finish G8 Description STICK NAIL 2.80-50 SMOOTH GAL8 2M Qty per box 2000 Will also fit the N80SB, FW28WW-E, N100S
BT13 Series 18 gauge brown Brad nails for use with the Bostitch brad nailer. Finish nails (Brads) are normally of a rectangular cross section instead of being round. Their diameters are less than the coil and stick nails, and are primarily used for finish and trim work in the construction and joinery industries.Length : 19mm.Colour : Brown.Pack : Clam pack of 1000.
The DEWALT Extreme Cement Saw Blade features synthetic PCD (Polycrystalline Diamond) tipped teeth. These PCD coated teeth provide 100% longer life in fibre cement than TCT tipped blades. The laser cut blade features anti-vibration body slots and precision ground tips. The blade design also helps to reduce dust production when cutting fibre cement materials. Suitable for cutting a range of materials including fibre cement board, laminate/pre finished flooring, MDF, plywood, etc.This DEWALT Extreme PCD Fibre Cement Saw Blade has the following specification: Blade Diameter: 160mm.Bore Size: 20mm.Tooth Count: 4.Kerf Thickness: 1.8mm.Plate Thickness: 1.4mm.Grind: FTOP.Rake Angle: 12°.
Box of 50 MasonMate Hex Concrete Screwbolts M10 x 60mm. The MasonMate Hex Concrete Screwbolts are ideal for anchoring in concrete, blocks, brick and stone. Zinc plated for increased durability with a self-tapping thread design. M10 x 60mm (50)
The Forgefix Chemical Anchor Resin Nozzles are specially designed mixer nozzles, which eliminate the need to mix mortar on site. Suitable for use with the 150ml, 300ml and 380ml Resin. APPLICATION:Use as a replacement nozzle, if the resin has hardened inside the original nozzle.
These ForgeFix ForgeFast Wood Screws have a universally accepted, Pozi compatible drive. They have 6 underhead lobes for improved countersinking and reduced surface dust, and reinforced countersunk necks which improve holding power. The screws have an anti-friction thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber and improved drawing strength. The thread is serrated for improved pull-out and reduced torque when inserting the screw. The double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel. The screws have a 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use.Size: 3.5 x 20mm.Box quantity: 200.
Main Product Description:
Introducing the FloPlast 114mm Square Running Outlet in Black, a high-quality, cost-effective solution for both new-build and refurbishment projects. This PVC-U outlet is designed to join two gutter lengths and provide an outlet to a 65mm Square downpipe, increasing the maximum flow rate and serviceable roof area of the system. It features a pre-lubricated seal for improved performance and is available in multiple colour options.
Features:
- Attractive rectilinear profile
- Clip system for fast and easy installation
- Connects two lengths of Square Line gutter
- Outlet connects to a 65mm Square downpipe
- Ideal for outlet placement at centre of gutter run
- Available in multiple colour options
- FloPlast 10-year colour and performance guarantee
- Covered by BSI Kitemark – no. KM501316
- Manufactured to BS EN 607 standards
Benefits:
- Cost-effective solution for new-build and refurbishment applications
- Increases maximum flow rate and serviceable roof area of the system
- Pre-lubricated seal for improved performance
- Available in multiple colour options
- 10-year colour and performance guarantee
- Kitemarked and manufactured to BS EN 607 standards
- Suitable for various roof areas and gutter systems
Main Product Description:
The FloPlast Compression Waste Coupling 40mm White is a high-quality, easy-to-install waste system made of white polypropylene. It is suitable for carrying waste safely and cleanly away from homes and can accept both plastic and copper pipes. The coupling is designed to BS EN 274-1 standards and is available in 32mm and 40mm diameters.
Features and Benefits:
- Easy to install without the need for solvent welding
- Manufactured to BS 5254, BS EN 1451-1:2000, BS 5255, BS 659, and BS 2871 standards
- Accepts plastic and copper pipes
- Quick and easy to install with a compression outlet
- Ideal for carrying waste safely and cleanly away from homes
The Teng Tools Impact Sockets are specifically designed for use with power tools and air tools. They are manufactured from chrome molybdenum steel in accordance with GGG-W-6608, providing the highest quality. The sockets have a 1/2in drive, and are suitable for both industrial and automotive applications. Each socket is individually branded and size marked for quick identification.This Teng Impact Socket has the following specification: Size: 27mmLength: 38mm
FloPlast's uPVC White Round Downpipe Clip is used to keep 68mm round downpipes fixed firmly in position once installed.
Product information
10 years Guarantee
Kitemark approved
Pre-lubricated seals
Features and benefits
The original Half Round profile
A practical, easy to install system, with good flow capacity
Pre-lubricated fitted gutter seal and retaining clip system for fast user friendly installation
Cost effective solution for both new build and refurbishment applications
Connects to most other metal or plastic systems using our extensive range of adaptors
Specifications
Brand FloPlast
Pack quantity 1
Product diameter 68mm
Product length 113mm
Standard BS EN 607
Colour White
Material uPVC
Model name/number RC1W
Pipe shape Round
Product code 5055149903878
This Teng Tools Professional 3/8in drive S2 hex socket bits made from chrome vanadium steel with a satin finish. Overall Length: 49.5mm.The TENM381506 Hex Socket Bit has the following specifications:Overall length: 49.5mm.AF Size: 6mm.
Main Product Description:
FloPlast AV40 is a 40mm air admittance valve designed for compression installation. It comes in a white finish to blend seamlessly with your plumbing system. This valve allows for the release of air while preventing water from flowing back into the drain pipe, ensuring efficient wastewater disposal.
Features:
- Compression fitting design for easy installation
- White finish for aesthetic appeal
- Designed for use with universal waste pipes
Benefits:
- Ensures proper ventilation in wastewater systems
- Prevents siphoning and gurgling noises
- Promotes smooth flow of wastewater
This Teng Tools 9 piece punch set contains a selection of punches and cold chisels. These striking tools are made of steel, which is hardened to ensure a long working life. The pin punches can be used to drive pins for affixing a fixture to a rotating shaft, whereas the centre punch is ideal for marking the centre of a point as a guide for drilling. Supplied in storage tray. Contents: 1 x 150mm Centre Punch: 5mm.6 x 150mm parallel Punch: 3, 4, 5, 6, 7 & 8mm.1 x 150mm Flat Chisel: 19mm.1 x 200mm Flat Chisel: 25mm. Specification Dimensions: 265 x 142 x 50mm.Weight: 1.4kg.
A professional bi-hexagon, AF socket produced in accordance with ISO 9000 and AS5954 specifications for increased torque and reduced risk of rounding fasteners.Manufactured from chrome vanadium steel with a satin finish.1/2 in square drive.Size 9/16 AFLength 38mm
Main Product Description:
The FloPlast S Trap 76mm Seal x 40mm TS47 is a waste and shower trap designed for quick and secure connection in wet conditions. It is manufactured to BS EN 274 standards using polypropylene material. The deep 76mm seal and downward facing outlet make it suitable for various applications.
Features:
- Deep 76mm seal and downward facing outlet.
- Made from polypropylene according to BS EN 274 standards.
- Designed for quick and secure connections in wet conditions.
Benefits:
- Enhanced durability due to polypropylene construction.
- Suitable for use in wet environments without compromising stability.
Main Product Description:
Introducing the FloPlast 68mm Round Pipe Shoe in Grey, designed to perfectly complement your 68mm round downpipes. This durable shoe offers a consistent finish and color, ensuring minimal maintenance while providing strength to support typical ladder weight. Available in various colors including grey, black, white, brown, and anthracite grey, it seamlessly integrates into your existing guttering system.
Features:
- Suitable for 68mm round downpipes
- Inherently strong and durable
- Available in multiple colors
- Consistent finish and color, virtually maintenance-free
- Tough enough to support normal ladder weight
Benefits:
- Enhances the aesthetic appeal of your property by matching the color scheme of your downpipes
- Reduces maintenance requirements due to its consistent finish and color
- Provides additional strength to support ladders during cleaning or repairs
Floplast TS43 40m White Polypropylene S Waste Trap with 38mm Seal.
Manufactured in white high temperature polypropylene with compression type outlets that fit plastic and copper waste pipes 32mm/11/4".
Manufactured to BS EN 274-1:2002
Teng Tools specialises in a range of mechanics' hands tools to suit the price conscious professional user and the quality conscious DIY enthusiast. The Tools have been designed to Teng's own specifications, which meet or exceed British European or federal standards. This Teng Tools socket is a professional, bi-hexagon 1/2 inch square drive socket. It has been produced in accordance with ISO 9000 and AS954 specifications for increased torque and reduced risk of rounding fasteners. Made from chrome vanadium steel for strength and durability, with a satin finish.The TENM120532 Bi-Hexagon, 12-point socket has the following specifications:Size: 32mm. Length: 43mm.
