These Forgefix Pozidriv Self-Tapping Screws are zinc plated for increased resistance to corrosion. Their Pan Head, with a flat under head surface makes the screw ideal to lay flat on sheet material of all types, thus reducing deformation. The screws tap their own thread in a pre-drilled pilot hole, in sheet metal. The screws are single threaded to resist pull-out. APPLICATIONIdeal for use in many DIY, ironmongery, engineering, electrical and plumbing applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver.Self Tapping Screw Pozi Pan Head ZP 1/2 x 10 Box 200
The DEWALT Extreme 2 Metal Drill Bit is suitable for portable or stationary drilling of steel, alloyed and non alloyed, up to 900N/mm. Particularly suited to drilling sheet or thin materials where accurate burr-free holes are required. Very effective in wood and plastic materials. The patented split pilot point design eliminates walking/slipping on contact.This DEWALT Extreme 2 Metal Drill Bit has the following specification: Tip Diameter: 4.2mm.Working Length: 43mm.Overall Length: 75mm.Pack Quantity: 1.
The DEWALT Galvanised Ring Shank Nails are paper-taped for use with the DEWALT DCN692 Nailer and other popular brand first fix angled nailers. Annular rings for ultimate grip on first fix, framing applications. Galvanised finish for increased durability, suitable for indoor and outdoor use. Paper-taped for easy loading, handling and a cleaner job. Inclination of the nails in the casing is 33-34°.1 x Box of 2,200 DEWALT DNPT28R75 Galvanised 33° Angle Ring Shank Nails 2.8 x 75mm
Everbuild 711 TileSet Flexiplus Tile Adhesive is a quick setting floor and wall tile mortar with added latex powder for improved flexibility. Can be used on prepared wooden floors, interior and exterior use where same day fixing and grouting is required. Tested to EN12004 Class C2FTE S1 SURFACES/ PREPARATION Concrete/Screeds/Renders/unskimmed plasterboard/blockwork- Allow fresh concrete etc to dry for at least 4 weeks before tiling. Ensure floors are free from rising damp. Prime surfaces with EVERBUILD PVA BOND diluted 4 parts water to 1 part PVA Bond and allow to dry. Timber Floors - Suitable for interior timber floors only. Ensure adequate ventilation beneath floors. Cover wooden floors with moisture resistant exterior grade (marine) plywood, which must be at least 12mm thick. Secure with screws, not nails, at 300mm centres. Prime with EVERBUILD PVA BOND diluted 3 parts water to 1 part PVA Bond and allow to dry. Softwood tongue and groove boarding- Boards must be screwed (not nailed) down to joists at 300mm centres and surfaces sealed with EVERBUILD PVA BOND diluted 3 parts water to 1 part PVA Bond and allowed to dry. Existing tiling. Ensure tiles are securely bonded to wall or floor. Roughen surface of glazed tiles with sander. Apply a bonding coat of neat EVERBUILD PVA BOND. Apply mixed adhesive whilst bonding coat is still tacky.1 x Everbuild 711 TileSet Flexiplus Tile Adhesive White 20kg
The Evolution R225DWS Telescopic Dry Wall Sander has a powerful motor for sanding joints in plaster walls and ceilings, or removing old finishes. It offers sanding with variable speeds (for different materials), tackling the job up to ten times faster than conventional methods. It is comfortable and flexible in operation, with a 0-90° pivoting head, ensuring you follow the contours of the work surface, in any direction. The telescopic design extends this lightweight dry wall sander to 1.97 metres in length, making it easy to sand those hard to reach areas comfortably. Other features include soft grips on the main handle and bail handle for effective control and perfect weight balance. This dry wall sander is equipped with LED lighting allowing you to see any shadows created by unsmooth areas, when lighting is insufficient. Supplied with: 6 x 225mm Sanding Discs (One of each: 60, 80, 120, 150, 180 & 240 Grit). and 1 x 4m Vacuum Hose. Specification Input Power: 710WNo Load Speed: 600-1,500/min.Pivoting Head: 0-90°Max. Length: 1.97mWeight: 5.8kg
Main Product Description:
The FloPlast ABS Solvent Weld 135' Obtuse Bend is a high-quality plumbing component designed for waste pipes. It is crafted from robust ABS material and available in grey color. This bend provides a smooth 135-degree angle, ensuring seamless water flow. Its UV-stable finish makes it suitable for outdoor applications, enhancing durability and longevity.
Features:
- Made of durable ABS material
- Finished in grey color
- Smooth 135-degree angle
- UV-stable finish for enhanced durability
Benefits:
- Ensures smooth water flow with its precise angle
- Suitable for both indoor and outdoor use due to UV stability
- Durable and long-lasting construction
Main Product Description:
FloPlast ABS Solvent Weld 90' Knuckle 50mm Grey - Lightweight, robust, and cost-effective solution for domestic and commercial applications, offering reliable connections for solvent weld waste pipes.
Features:
- Crafted from durable ABS material
- Finished in Grey
- Smooth 90-degree angle
- UV-stable finish suitable for exterior waste pipe connections
- No need for tightening during installation
Benefits:
- Versatile for various plumbing needs
- Enhanced pressure resistance and high impact resistant body
- WRAS approved
- Suitable for solvent weld waste pipe fittings
DEWALT SDS Plus XLR Full Head Carbide Drill Bits have a solid carbide tip that offers users the highest performance in the toughest applications. The 4-cutter geometry provides clean holes, high drilling speed and reduces the chance of jamming of the drill in reinforced concrete. Made from a superior hard metal alloy with an increased drill core structure for greater resistance to fracture. Optimised flute design allows for efficient debris removal.This DEWALT XSDS Plus XLR Full Head Carbide Drill Bit has the following dimensions: Diameter: 7.0mm.Working Length: ;100mm.Overall Length: ;160mm.Pack Quantity: 1.
DEWALT Mesh Sanding Discs last at least 4 times longer than traditional DEWALT sandpaper discs. Fibres are drawn away from the surface of the sanding disc into the small holes, and don't sit between the material and abrasive. This optimises the sanding effect. These sanding discs enable dust to be drawn through the mesh across a wider area rather than being limited to distinct holes in traditional sanding discs. They are also much easier to select as there is no requirement to match a specific dust extraction hole pattern. The mesh sanding discs have hook and loop fastening for quick and easy attachment. They can be easily cleaned to help prolong their life.The DTM3135 Mesh Sanding Discs have the following specifications:Size: 150mm.Grit: 120.Pack quantity: 10.
DEWALT DCD1623 XR Brushless Magnetic Drill with 2 speed mechanical transmission and 5 electronic variable speeds for optimal drilling speed with both small and large diameter bits. Its brushless motor provides corded drill performance and forward/reverse options make it convenient for tapping. The drill is fitted with a permanent magnet, with 9,9 KN of holding force to prevent accidental magnet deactivation. Lift-off detection detects excess rotation and automatically cuts power for increased user protection. There is also an on board LED light to illuminate the work surface. Comes as a Bare Unit, NO battery or charger supplied. Specification: No Load Speed: 130-810/min.Magnetic Adhesion: 9.9KNMax Capacity: Diameter: 50mm, Depth: 50mmHeight: 345.4mmWeight (with Battery): 14.3kg
Forgefix TechFast Roofing Sheets to Steel Hex Screws are used for joining metal roofing panels to steel frame buildings. The screws are fire resistant and corrosion resistant. Protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours. Complies with EU Safety, Health and Environmental requirements. They are supplied with 16mm EPDM rubber washers.These Forgefix TechFast Roofing Sheets to Steel Hex Screws have the following specification: Size: 5.5 x 32mmEffective Thread Length: 9mmPack Size: 100Drill Tip: No.5 No.5 drill tip for self-drilling in heavy gauge steel up to 12.5mm.
These DEWALT 16 Gauge Galvanised Finish Nails are compatible with most 16Ga straight magazine nailers. Suitable for a wide range of applications. Made from inspected high-quality steel to ensure reliability in performance. Galvanised nails reduce the likelihood of rust or staining. Available in packs of 2500 and 5000.1 x Box of 2500 DEWALT 16 Gauge Galvanised Finish Nails 64mm
GYS Welding Gauntlets are made from cowhide leather with inner lining that protects against heat. Assembly, American type with webbed thumb. The major and annular are separately applied (sewn separately to the rest of the palm). The cuffs are fully lined with cotton canvas and are neatly finished off with edging. The wide cuff makes them easy to remove once your finished. Suitable for MMA/MIG-MAG Welding.Conforms to EN 388, EN 407 EN 12477, and EN ISO 21420 Standards.Specifications:Max. Temp: 250°C.Overall Length: 35cm.Cuff Length: 14cm.Size: 10.
DEWALT Extreme Tri-Flute Spade Bits with 3 cutting edges for up to 6x faster cutting, combined with a tri-flute for optimum chip removal and less binding. There are 3 cutting spurs for cleaner and faster holes, the spurs also extend drilling life. Its full screw tip allows the bit to self-feed, for ease of use and pull through.Fitted with a quick-change shank, fits standard quick-change extensions and 1/4in hex bit adaptors. For use with corded and cordless drills. Suitable for drilling holes in wood up to 100mm deep.
1 x DEWALT Extreme Tri-Flute Spade Bit 25 x 152mm.
Thompson's Water Seal utilises hydrophobic technology to deliver invisible protection against water damage. The deep penetrating formulation travels deep into exterior dry porous surfaces to form a breathable membrane that allows moisture vapour inside the substrate to evaporate whilst protecting against water penetration and damage. Thompson's Water Seal has a unique formulation which, unlike some waterproofers, penetrates the surface therefore waterproofing even after the initial beading is gone. It will not be destroyed by ultraviolet light and is long lasting even under heavy moisture conditions. Assuming application instructions and coverage guidelines are adhered to, it provides effective water repellency for years. Suitable for use on brick, concrete and stone. For exterior use only.
Everflex 115 GP building mastic is an oil based compound intended for general pointing and sealing of many joints in traditional forms of construction. The sealant is rapidly and simply applied by extrusion from a cartridge gun. The product has good adhesion to most clean, dry surfaces. BENEFITS- Overpaintable.- Adheres to most common surfaces.- Semi drying - remains permanently plastic beneath surface skin.- High solids formulation - excellent gap filling properties without shrinkage.- Good external weathering properties. AREAS FOR USE- Perimeter pointing internally and externally around doors and windows.- Adheres to concrete, brick, wood, metals and glass without the use of a primer. C3 cartridge size.1 x Everbuild 115 General Purpose Building Mastic Grey 285ml
These Forgefix double slotted roofing bolts are supplied with square nuts and have a low profile mushroom head. Their bright zinc plated finish increases resistance to corrosion. The bolts are therefore suitable for both interior and exterior use, and can be exposed to weather conditions without the risk of rusting. APPLICATION:Used in many applications other than roofing, when joining products together.Use clearance drill sizes 1mm larger than bolt diameter. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. With slotted screwdrivers it is important to ensure that the tip matches the width of the screw slot, otherwise you run the risk of damaging the screw head. Slotted screwdrivers are available with either Flared or Parallel tips. For the majority of uses the Flared tip is ideal but if the screw/bolt needs to be driven below the material surface a Parallel tip screwdriver should be used.Roofing Bolt ZP M8 x 160 Bag 10
Spectre & trade; Advanced Coach Screws are three times faster than a regular coach screw. They have a hex flange head and 60-degree deep single thread. The quick start type 17 slash point eliminates the need for a pilot hole in most cases, some hardwood may still need pre-drilling. They have been surface hardened with anti-corrosion Zinc Yellow coating for increased durability. Socket driver included. UKCA/CE approved for use in load-bearing timber construction.Box of 50 ForgeFix Spectre & trade; Coach Screw Hexagon Head ZY M8 x 80mm.
Ronseal Colron Refined Wood Dye is a deeply penetrative wood dye with light fast pigments to ensure the colour doesn’t yellow over time or fade on exposure to sunlight. Quick drying, low V.O.C.
Deeply Penetrative Formula for Enhanced Colour
Light Fast Pigments Prevent Yellowing
Quick Drying for Efficient Application
Low V.O.C. for Safer Use
Ideal for Various Wood Types
Liberon Stone Floor Wax gives a traditional satin finish and helps to protect against stains, scratches and scuff marks. Made from a premium quality carnauba wax base. The slip-resistant finish enhances the natural colour of the stone while giving a beautiful soft lustre to the surface. Ideal for nourishing interior stone, slate, terracotta, quarry tiles and other natural or man-made stone floors, once sealed with Stone Floor Sealer. Specification: Coverage: 10-12m² per litre.Location: Interior.Dry Time: 2 hours.Application: Brush or Cloth. Tool Cleaning: White Spirit. 1 x Liberon Stone Floor Wax 2.5 litre
The Forgefast Hexagonal/Torx® Compatible Timber Screws are suitable for fixing into soft or hardwood. They have a combination hexagonal head with a deep Torx® compatible insert that reduces cam-out, also provides higher torque levels and a firmer drive. Its super sharp tip gives immediate bite from the very first turn. A patented self-drilling thread removes the need to pre-drill the timber and reduces the probability of splitting, even when screwing close to the edge. Hardened case and core give exceptional strength. Protected by elementech 2000 surface treatment which provides corrosion resistance up to 30 times longer than some standard zinc coated screws. They are highly resistant to pull out, they can flex by up to 35°, reducing likelihood of the screw shearing when used in flexible materials. CE approved for use in load-bearing timber construction. Available in a green or tan treated finish.Forgefast Hexagonal/Torx® Compatible Timber Screws Size: 7 x 150mm.Pack Size: Tub of 50.Finish: Tan elementech 2000.
These Forgefix round cable clips have hardened masonry nails for increased efficiency, and which will fix into timber, block work and mortar. The nail should not be hammered directly in brick, and fixing into mortar is recommended. Application:For fitting all types of cable to timber or masonry in audio, visual and both commercial and domestic cabling. Colour: White.Cable Clip Round White 9-11mm Box 100
The DEWALT DCH481 XR FlexVolt Brushless SDS Max Hammer produces a performance that rivals corded machines, the brushless motor provides extreme runtime and reduced maintenance. Rotation stop mode for chiselling and impact stop mode for rotary only drilling with dry diamond cores. Ideal for drilling anchors and fixing holes into concrete, brick and masonry up to 40mm in diameter. For increased safety, the anti rotation system detects a loss of tool control, and reacts by instantly cutting the power. It has a compact, lightweight and ergonomic design for improved comfort and support during extended operating periods. Fitted with a bight white LED, with a delay feature for improved visibility. DCH481X2: 2 x 18/54 Volt 9.0/3.0Ah Li-Ion Batteries.DCH481N: Bare Unit, No Battery or Charger. Specification Modes: Rotary Only, SDS Hammer, Chisel Only. No Load Speed: 540/min.Impact Rate: 0-3,150/min with 6.1 Joules.Capacity: Concrete: 40mm, Breakthough: 65mm, Core: 100mm.Weight 5.4kg.The DEWALT DCH481N XR FlexVolt Brushless SDS Max Hammer is supplied as a Bare Unit, No Battery or Charger Supplied.
The DEWALT SDS Max Drill Bit has a 4 cutter X-head design for improved user comfort, reduced vibration and improved hole quality. The 4-flute spiral maximises flute entry which increases drilling speed and debris removal with a heavy-duty shank for maximum durability.1 x DEWALT SDS Max Drill Bit 12 x 340mm
Cuprinol Ultimate Garden Wood Preserver has a superior, water-based formulation that works in 3 ways. Its UV filters give long lasting colour for up to 5 years, added waxes and resins provide advanced weather protection and active ingredients penetrate deep into the wood to protect against rot, decay and blue stain. Ultimate Garden Wood Preserver can be used on all types of rough or planed wood such as sheds, fences, summer houses, gates and arbours. Drying time: 2-6 hours.The Cuprinol CUPGWPRESG4L Ultimate Garden Wood Preserver has the following specifications:Colour: Spruce Green.Size: 4 litres.
These ForgeFix Don Quichotte Medium Gauge Masonry Nails have the following specification: Size: 3.0 x 70mmFinish: Zinc GalvanisedPack Quantity: Box of 100
These Forgefix Multi-Purpose Pozi Screws with countersunk heads have a zinc yellow passivated finish for increased durability. The screws are immensely popular and versatile, and used in all trades including joinery, electrical and plumbing. Also widely used in DIY applications. APPLICATIONSuitable for use with many materials including PVCu, Timber, Chipboard, MDF, and other similar types. The Zinc Yellow Passivation process of electroplating is similar to the 'Galvanised' and 'Zinc Plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish, whilst having excellent resistance to corrosion. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have single threads, designed to offer higher pull out values and quicker insertion.Multi-Purpose Pozi Screw Countersunk ST ZYP 4.0 x 15mm Box 200
A range of DEWALT FlexVolt Chainsaw Bars & Chains. Made from high quality materials.The DEWALT DT20688 FlexVolt Chainsaw Chain 45cm, made from high quality materials, is one of a range of bars and chains. Specification: Bar Size: 45cm.
The DeWalt Elite Series Carbide SDS and 7pc Drill Bit Set is ideal for drilling holes in concrete. High speed blasting strengthens the bit to reduce the risk of breakage.The 4 cutter carbide head provides maximum performance. Sizes: 5-12mm.
Stick Nails for use with the Stanley Bostitch Wire Weld Framing Nailers, the traditional wire weld collation gives the stick nails more rigidity and resistance to damp environments. 28° Collation Angle Designed for the construction market, where it is important to find the right combination of tool weight and working autonomy. Since sticks contain fewer nails than coiled nails (approx 25) and less of them are loaded into the nailer, the tool is lighter. A simpler feed mechanism for stick nails also helps to keep the weight of the tools lower than for coil nailers for similar size nails. This is important when you are working up a ladder with your arm stretched out. (Remember only tools fitted with sequential trip should be used when working up a ladder). Smooth shank nails have exactly that: a smooth appearance. Due to their regular form they can be produced at very high speed and are therefore the most economical type of nail. However, their holding power is the lower than ring shank nails. They require less energy to drive them and the air consumption per nail can be lower. Sometimes it is possible to use a smaller tool to drive them. Ring shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Ring shank nails have to be produced at lower speeds and their cost is generally higher than for a smooth shank nail. The air consumption per nail is also higher, and the energy required to drive these nails into hard wood is very much greater. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising , or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Gauge/Diameter (mm) 3.1 Length 90 28 Collation AngleSKU S310R90 Profile RING Finish BRIGHT Description STICK NAIL 3.10-90 RING 2M Qty per box 2000Will also fit the N80SB, FW28WW-E, N100S
The DEWALT DCS7485 XR FlexVolt Cordless Table Saw is fitted with a powerful, brushless motor for high performance in all applications. With a cast table top design, rack and pinion fence system, front and rear fence lock and large, clear scales combine to give an extremely accurate and easy to use saw. The fence system provides 610mm of rip capacity in a portable design for cutting large sheet materials to size. The saw is fitted with a steel roll cage that helps to protect against jobsite drops and impacts. Its overload protection system ensures a powerful performance, even in hard, wet or frozen woods. With a quick bevel lock and a large scale for easy, accurate adjustments. DCS7485T2: 2 x 18/54V 6.0/2.0Ah Li-ion Batteries.DCS7485N: Bare Unit, No Battery or Charger. Specification No Load Speed: 5,800/minBlade: 210 x 30mm BoreRipping Capacity: Right: 610mm, Left: 318mmDepth of Cut: @90º: 65mm, @45º: 45mmBevel Capacity: -3° to 48°Table Size: 485 x 485mmWeight: 21.5kgThe DEWALT DCS7485T2 XR FlexVolt Cordless Table Saw is supplied with: 2 x 18/54 Volt 6.0/2.0Ah Li-ion Batteries.1 x 210mm 24 Tooth SERIES 30® Saw Blade.1 x Mitre Fence.1 x Parallel Fence.2 x Blade Spanners.1 x Dust Port Reducer.1 x Push Stick.1 x DCB118 Charger.1 x Soft Bag. DEWALT FlexVolt XR batteries stand at the forefront of cordless technology. They are the world’s first convertible 18/54 Volt batteries, offering unprecedented levels of power. Provides the unique ability to power heavy-duty construction power tools whilst still being compatible with existing DEWALT XR 18 Volt products and offering increased runtime.
The DEWALT DCH172D2 Ultra-Compact XR SDS Plus Rotary Hammer is supplied with: 2 x 18V 2.0Ah Li-ion Batteries1 x 10.8-18V DCB115 XR Multi-Voltage Li-ion Charger1 x Carry Case
Box of 50 MasonMate Zinc Plated Through Bolts M10 x 130mm. The MasonMate Heavy-duty Through Bolt is for use in non-cracked concrete. Can be used for columns, beams, brackets and plates. Zinc plated for increased durability. Option 7 ETA Approved. M10 x 130mm (50)
