MEXCO XCEL Grade Wax Filled (Hex Fit) Tile Drill Bits offers maximum performance and cost per cut when drilling the hardest of man-made and natural decorative materials. No water is required due to the special wax filled core which melts, lubricates and cools when drilling. For use on high speed corded drills. Suitable for dry cutting.
1 x MEXCO XCEL Grade Wax Filled (Hex Fit) Tile Drill Bit 6mm
MEXCO GPX10-8 Concrete Diamond Blades have been specifically designed for cutting a wide range of general purpose building materials. The GPX10-8 offers a cost effective solution for the user who requires a diamond blade which can cope with the cutting of the most widely used non-abrasive building materials.MEXCO have developed this blade using a high diamond concentration and the highest quality ingredients knowing the user could be cutting a wide variety of non-abrasive building materials such as; Reinforced Concrete, Hard Limestone and Concrete Paviours.Segment Height: 8mm
1 x MEXCO GPX10-8 Concrete Diamond Blade 115 x 22mm
These Forgefix single-threaded (ST) decking screws have Pozi heads and are specially designed, hardened and green treated. The design of the screw helps prevent splitting of the boards, and allowing them to expand and contract with the changing seasons. APPLICATIONSpecifically used in decking applications but also widely used in exterior timber and fencing applications. The 1,000 hour green treated finish offers excellent corrosion resistance to ACQ (Alkaline Copper Quaternary) treated timber used in construction and decking applications. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. Single-thread screws have been designed to offer higher pull out values and quicker insertion.Decking Screw Pozi ST Green Anti-Corrosion Treated 4.5 x 75mm Box 200
MEXCO XCEL Grade Wax Filled (Hex Fit) Tile Drill Bits offers maximum performance and cost per cut when drilling the hardest of man-made and natural decorative materials. No water is required due to the special wax filled core which melts, lubricates and cools when drilling. For use on high speed corded drills. Suitable for dry cutting.
1 x MEXCO XCEL Grade Wax Filled (Hex Fit) Tile Drill Bit 12mm
MEXCO Slotted Dry Core Drills offer fast drilling speeds and all round performance in masonry building materials due to the high quality diamond segments and welded barrels. MEXCO dry core drills should be used in conjunction with a minimum 850W+ drill motor fitted with a slipping clutch. Suitable for dry cutting.
1 x MEXCO Slotted Dry Core Drill X90 Grade 32mm
MEXCO GPX10-8 Concrete Diamond Blades have been specifically designed for cutting a wide range of general purpose building materials. The GPX10-8 offers a cost effective solution for the user who requires a diamond blade which can cope with the cutting of the most widely used non-abrasive building materials.MEXCO have developed this blade using a high diamond concentration and the highest quality ingredients knowing the user could be cutting a wide variety of non-abrasive building materials such as; Reinforced Concrete, Hard Limestone and Concrete Paviours.Segment Height: 8mm
1 x MEXCO GPX10-8 Concrete Diamond Blade 230 x 22mm
Discover the durability and reliability of JRP Riveting Products with our 6.4 x 18.5mm Steel Dome Head Structural Rivets. Designed for various applications, these rivets ensure a strong hold and are perfect for both DIY and professional projects.
High-Quality Steel Construction for Enhanced Strength
Dome Head Design Provides a Secure Fit
Ideal for Structural Applications and Repairs
Easy to Install with Standard Tools
Perfect for Both DIY Enthusiasts and Professionals
This MEXCO One Shot Oil is a pre-measured bottle of premium grade 2 stroke oil, specifically designed to run in mixture lubricated 2 stroke engines. One bottle to 1 gallon to give a 50/1 mix.
MEXCO GP Concrete Turbo Diamond Blades provides the user with excellent cutting characteristics in the majority of non-abrasive construction products used in the UK.Mexco have developed this blade using a high diamond concentration and the highest quality ingredients knowing the user could be cutting a wide variety of non-abrasive building materials such as; Reinforced Concrete, Hard Limestone and Concrete Paviours.
1 x MEXCO GP Concrete Turbo Diamond Blade 125 x 22mm
MEXCO Professional Wet Core Drills have been developed to offer maximum effectiveness in the hardest of natural and man-made materials. These products have a laser welded segment to prevent segment loss and a rooftop segment for easier starting in harder materials. Suitable for wet cutting.
1 x MEXCO Wet Core Drill 52 x 450mm
MEXCO UHXCEL Ultra Hard Plus Diamond Blades have been specifically designed and manufactured for cutting ultra hard materials such as; Granite, Porcelain, Marble, Ceramic Tiles, Clay Roof Tiles and other hard natural stone and man-made fired materials. With an ultra thin castellated turbo segment, the MEXCO UHXCEL Diamond Blade delivers a fantastic cutting performance. Perfect for: Tile Fitters, Roofers, Kitchen Fitters, Stone Workers, Plumbers, Civil Engineers and General Building Contractors.Advisory: Maximum Recommended Cutting Depth: 20mm.
1 x MEXCO UHXCEL Ultra Hard Materials Diamond Blade 230 x 22mm
MEXCO UHXCEL Ultra Hard Plus Diamond Blades have been specifically designed and manufactured for cutting ultra hard materials such as; Granite, Porcelain, Marble, Ceramic Tiles, Clay Roof Tiles and other hard natural stone and man-made fired materials. With an ultra thin castellated turbo segment, the MEXCO UHXCEL Diamond Blade delivers a fantastic cutting performance. Perfect for: Tile Fitters, Roofers, Kitchen Fitters, Stone Workers, Plumbers, Civil Engineers and General Building Contractors.Advisory: Maximum Recommended Cutting Depth: 20mm.
1 x MEXCO UHXCEL Ultra Hard Materials Diamond Blade 125 x 22mm
MEXCO Extension Bars screw directly between the Diamond Core Drill and the Core Drill Adaptor to enable drilling through a cavity wall. Suitable for 1/2in BSP female to 1/2in BSP male fitments.
1 x MEXCO Extension Bar 150mm.
MEXCO UHXCEL Ultra Hard Plus Diamond Blades have been specifically designed and manufactured for cutting ultra hard materials such as; Granite, Porcelain, Marble, Ceramic Tiles, Clay Roof Tiles and other hard natural stone and man-made fired materials. With an ultra thin castellated turbo segment, the MEXCO UHXCEL Diamond Blade delivers a fantastic cutting performance. Perfect for: Tile Fitters, Roofers, Kitchen Fitters, Stone Workers, Plumbers, Civil Engineers and General Building Contractors.Advisory: Maximum Recommended Cutting Depth: 20mm.
1 x MEXCO UHXCEL Ultra Hard Materials Diamond Blade 115 x 22mm
The MEXCO Diamond Tile Drill Bit Range offers maximum performance and cost per cut when drilling the hardest of man-made and natural decorative materials. No water is required due to a special wax filled core melts, lubricates and cools when drilling. Supplied to fit M14 thread Angle Grinders although an M14 to Hex adaptor can be used with a High Speed Drill. Suitable for dry cutting.
The MEXCO XCEL Grade Diamond Tile Drill Bit Set in supplied in a robust carry case. Contains:4 x XCEL Grade Diamond Tile Drill Bits: 6, 7, 8, 10mm1 x M14 to Hex Adaptor1 x Cooling Wax
MEXCO GPX90 Concrete Diamond Blades provide the user with excellent cutting characteristics in the majority of non-abrasive construction products used in the UK.MEXCO have developed this blade using a high diamond concentration and the highest quality ingredients knowing the user could be cutting a wide variety of non-abrasive building materials such as; Reinforced Concrete, Hard Limestone and Concrete Paviours.Segment Height: 10mm (12mm on 300mm + diameter)
1 x MEXCO GPX90 Concrete Diamond Blade 450 x 25.4mm
MEXCO UHXCEL Ultra Hard Plus Diamond Blades have been specifically designed and manufactured for cutting ultra hard materials such as; Granite, Porcelain, Marble, Ceramic Tiles, Clay Roof Tiles and other hard natural stone and man-made fired materials. With an ultra thin castellated turbo segment, the MEXCO UHXCEL Diamond Blade delivers a fantastic cutting performance. Perfect for: Tile Fitters, Roofers, Kitchen Fitters, Stone Workers, Plumbers, Civil Engineers and General Building Contractors.Advisory: Maximum Recommended Cutting Depth: 20mm.
1 x MEXCO UHXCEL Ultra Hard Materials Diamond Blade 200 x 25.4mm
The MEXCO Slotted Dry Core Drill, XCEL Grade. Laser welded, castellated segments allow for a faster and accurate drilling experience due to the high diamond grit concentration and rooftop segments. MEXCO dry core drills should be used in conjunction with a minimum 850W+ drill motor fitted with a slipping clutch. Suitable for dry cutting.
1 x MEXCO Slotted Dry Core Drill XCEL Grade 65mm
MEXCO UHXCEL Ultra Hard Plus Diamond Blades have been specifically designed and manufactured for cutting ultra hard materials such as; Granite, Porcelain, Marble, Ceramic Tiles, Clay Roof Tiles and other hard natural stone and man-made fired materials. With an ultra thin castellated turbo segment, the MEXCO UHXCEL Diamond Blade delivers a fantastic cutting performance. Perfect for: Tile Fitters, Roofers, Kitchen Fitters, Stone Workers, Plumbers, Civil Engineers and General Building Contractors.Advisory: Maximum Recommended Cutting Depth: 20mm.
1 x MEXCO UHXCEL Ultra Hard Materials Diamond Blade 250 x 25.4mm
The MEXCO Slotted Dry Core Drill, XCEL Grade. Laser welded, castellated segments allow for a faster and accurate drilling experience due to the high diamond grit concentration and rooftop segments. MEXCO dry core drills should be used in conjunction with a minimum 850W+ drill motor fitted with a slipping clutch. Suitable for dry cutting.
1 x MEXCO Slotted Dry Core Drill XCEL Grade 38mm
MEXCO Professional Wet Core Drills have been developed to offer maximum effectiveness in the hardest of natural and man-made materials. These products have a laser welded segment to prevent segment loss and a rooftop segment for easier starting in harder materials. Suitable for wet cutting.
1 x MEXCO Wet Core Drill 178 x 450mm
MEXCO Professional Crown Drills have been developed to offer maximum effectiveness in the hardest of natural and man-made materials. These products have a laser welded segment to prevent segment loss. Suitable for wet cutting.
1 x MEXCO Wet Core Drill (Crown Segment) 20mm
MEXCO Professional Wet Core Drills have been developed to offer maximum effectiveness in the hardest of natural and man-made materials. These products have a laser welded segment to prevent segment loss and a rooftop segment for easier starting in harder materials. Suitable for wet cutting.
1 x MEXCO Wet Core Drill 162 x 450mm
MEXCO Slotted Dry Core Drills offer fast drilling speeds and all round performance in masonry building materials due to the high quality diamond segments and welded barrels. MEXCO dry core drills should be used in conjunction with a minimum 850W+ drill motor fitted with a slipping clutch. Suitable for dry cutting.
1 x MEXCO Slotted Dry Core Drill X90 Grade 48mm
The MEXCO FCXCEL Grade Flush Cut Diamond Blade is designed to be used on angle grinders for both straight and flush cutting. These blades are fitted with a detachable flange mount with an M14 thread attaching directly to most angle grinders. The flush face gives the opportunity for deep cutting and flat finishing.
1 x MEXCO FCXCEL Grade Flush Cut Diamond Blade 125 x 22mm
MEXCO Professional Wet Core Drills have been developed to offer maximum effectiveness in the hardest of natural and man-made materials. These products have a laser welded segment to prevent segment loss and a rooftop segment for easier starting in harder materials. Suitable for wet cutting.
1 x MEXCO Wet Core Drill 152 x 450mm
MEXCO UHXCEL Ultra Hard Plus Diamond Blades have been specifically designed and manufactured for cutting ultra hard materials such as; Granite, Porcelain, Marble, Ceramic Tiles, Clay Roof Tiles and other hard natural stone and man-made fired materials. With an ultra thin castellated turbo segment, the MEXCO UHXCEL Diamond Blade delivers a fantastic cutting performance. Perfect for: Tile Fitters, Roofers, Kitchen Fitters, Stone Workers, Plumbers, Civil Engineers and General Building Contractors.Advisory: Maximum Recommended Cutting Depth: 20mm.
1 x MEXCO UHXCEL Ultra Hard Materials Diamond Blade 150 x 22mm
The MEXCO X90 Grade Mortar Raking Diamond Blade offers fast removal of mortar joints between bricks, natural stone, blocks and facing bricks. Mortar raking blades can also be used in the cutting of lead flashing channels.
1 x MEXCO X90 Grade Mortar Raking Diamond Blade 125 x 22mm
Flex Power Tools Fine Polishing Pad for a maximum deep sheen. When combined with black polish it’s ideal for removing slight scratches, holograms and for general colour refreshing. The special reticulation makes them highly tear-resistant and durable.
Pack of 2 Flex Power Tools Fine Polishing Pads 75mmSuitable for: PE 8-4 80 230/BS, PE 14-2 150 230/BS, PE 150 18.0-EC/5.0 P-Set, PE 150 18.0-EC/5.0 Set, PXE 80 10.8-EC/2.5 P-Set, PXE 80 10.8-EC/2.5 Set, PXE 80 10.8-EC/2.5 Set UK, PXE 80 12-EC, XFE 7-12 80 230/BSSpecifications:Diameter: 75mmHeight: 20mm
The MEXCO Slotted Dry Core Drill, XCEL Grade. Laser welded, castellated segments allow for a faster and accurate drilling experience due to the high diamond grit concentration and rooftop segments. MEXCO dry core drills should be used in conjunction with a minimum 850W+ drill motor fitted with a slipping clutch. Suitable for dry cutting.
1 x MEXCO Slotted Dry Core Drill XCEL Grade 162mm
The MEXCO X90 Grade Cup Grinders are designed for use in conjunction with grinding machines and angle grinders for the preparation or finishing of construction site materials. These products are especially suited for the preparation or repair of concrete and natural stone, the turbo segment offers a smoother finish.
1 x MEXCO X90 Grade Cup Grinder 115mm
MEXCO Extension Bars screw directly between the Diamond Core Drill and the Core Drill Adaptor to enable drilling through a cavity wall. Suitable for 1/2in BSP female to 1/2in BSP male fitments.
1 x MEXCO Extension Bar 460mm
