The Flex MS-1706 wall chaser has FR electronic control with constant speed control by means of a tachogenerator. It features soft start, overload protection and temperature monitoring. The wall chaser has a patented swivel-mounted motor (EP1693169) which allows for push and pull cutting. It has optimal dust extraction and maximum safety due to the enclosed guard. It allows blades to be changed tool-free and has slit width adjustment. The MS1706 also has a rotating adaptor for dust extractor, tool-free cutting depth adjustment and plunge cut stop. It chases two parallel slots up to 35 mm deep and 30 mm wide and the slot breaker allows for easy removal of the remaining material without a hammer. Specification Input Power: 1,400 Watt.No Load Speed: 7,500/min.Cutting depth: 0-35mm.Groove width: 10-30mm.Disc: 140mm M14 Spindle.Weight: 4.6kg.Flex Power Tools MS-1706 140mm Wall Chaser 240 Volt Version.
PrimaPress is a premium copper press fitting, suitable for many uses including water, gas (gas range only), glycol and more.
PrimaPress’ high specification ensures that it is as good as the market leaders, boasting a leak before press detection system, as well as being both WRAS and DVGW approved. Compatible with any M press jaws, PrimaPress offers a fast and cost-effective flameless installation, whether it is domestic or commercial, with sizes from 15mm to 54mm, and offering a market leading 50-year Manufacturing Defect Warranty.
Manufactured to ISO 9001:2008, ISO 14001:2004: GB/T 19001-2008
Available in 15mm to 54mm with a maximum working pressure of PN16 and temperature range of -10 to 110 degrees
Flameless installation – No hot works
WRAS and DVGW certification
Leak before press detection system
Higher range and maximum operating temperature than competitors (-10 to 110 degrees)
Tested to 24 bar of pressure
Fully traceable with Primaflow markings and batch information
50 Year Manufacturing Defect Warranty
Compatible with all M Press tools
PrimaPress is a premium copper press fitting, suitable for many uses including water, gas (gas range only), glycol and more.
PrimaPress’ high specification ensures that it is as good as the market leaders, boasting a leak before press detection system, as well as being both WRAS and DVGW approved. Compatible with any M press jaws, PrimaPress offers a fast and cost-effective flameless installation, whether it is domestic or commercial, with sizes from 15mm to 54mm, and offering a market leading 50-year Manufacturing Defect Warranty.
Manufactured to ISO 9001:2008, ISO 14001:2004: GB/T 19001-2008
Available in 15mm to 54mm with a maximum working pressure of PN16 and temperature range of -10 to 110 degrees
Flameless installation – No hot works
WRAS and DVGW certification
Leak before press detection system
Higher range and maximum operating temperature than competitors (-10 to 110 degrees)
Tested to 24 bar of pressure
Fully traceable with Primaflow markings and batch information
50 Year Manufacturing Defect Warranty
Compatible with all M Press tools
The Unifix Grade 8.8 High Tensile Hexagon Bolts DIN 931 Galvanised - M24 x 200 are designed for high tensile applications, providing exceptional strength and durability. Ideal for various construction and engineering projects.
High Tensile Strength: Grade 8.8 ensures superior load-bearing capacity.
Corrosion Resistant: Galvanized finish protects against rust and wear.
Versatile Use: Suitable for a wide range of applications in construction and engineering.
Easy Installation: Standard hexagon head design allows for easy tightening.
Durable Material: Made from high-quality steel for long-lasting performance.
Gorilla Heavy-Duty Grab Adhesive is the all-purpose way to bond building materials. Extremely versatile, it grabs and bonds virtually anything instantly. Suitable for use indoors or out, even underwater, for an extra-tough bond which will last. Its flexible, easy flow formula means it can even be used for gap filling and is paintable.
1 x Gorilla Heavy-Duty Grab Adhesive White 200ml.
The Kuny's HM1214 Large Tape Holder is made from top grain leather. With an all rivet construction. Designed to fit tapes up to 8 metres. Overall Dimensions: 171 x 114mm (6.3/4 x 4.1/2in).
The Unifix Machine Screws Pozi Pan Head DIN 7985Z Bright Zinc Plated - M4 x 20 are designed for reliable fastening in various applications. This box of 50 screws is perfect for both DIY projects and professional use.
High-Quality Bright Zinc Plated Finish for Corrosion Resistance
Pozi Pan Head Design for Enhanced Grip
Standard M4 x 20 Size for Versatile Use
Box of 50 for Convenient Storage and Use
Ideal for Wood and Metal Applications
The Halls High Speed Steel Countersink with 1/4in hexagon shank, 3 flute 90° included angle. Designed for use with power tools and for use on metal.Size. 20.5mm.Angle. 90° .
The Kuny's SW-1504 Carry All Tool Pouch is made from tough polyester fabric. It has 9 pockets in total - 7 internal pockets inside the zipped compartment and 2 external pockets. In addition, the tool pouch has 5 web loops for extra carrying capacity. Its carabiner is ideal for carrying keys, small tools etc.
Discover the versatility of our Steel Shoulderless Thumbscrews BZP, designed for a variety of applications. This retail pack includes M5 x 12 screws, perfect for both DIY enthusiasts and professionals.
High-Quality Steel: Made from durable Bright Zinc Plated steel for long-lasting performance.
Easy to Use: Designed for quick and simple installation in various projects.
Versatile Application: Ideal for use in furniture assembly, machinery, and more.
Retail Pack: Conveniently packaged for easy storage and access.
Precision Engineering: Ensures a secure fit and reliable fastening.
Extra length kneepads made from thick moulded foam for comfort and protection.With double adjustable straps for a better fit and hook and loop fasteners. One size fits all.
The Evo-Stik Waterproof Wall Tile Adhesive is ready-mixed, easy to use and suitable for fixing ceramic tiles onto most interior walls and backgrounds, including cement rendering, plaster, plywood, plasterboard, blockboard, wood chipboard, old glazed tiles, glazed bricks and painted surfaces. The waterproof and non-slip formulation has an extended open time, making it quick and easy to apply. The colour is an off-white and coverage with a Notched trowel is 1.2 m² per litre, Solid Bed 0.3 m² per litre. These figures are approximate and do not include wastage. They also assume flat surfaces. NOTE that different trowels often apply the adhesive at different rates, usually greater than the above. Tested to EN 12004.Evo-Stik Waterproof Wall Tile Adhesive has the following specification: Size: 5 Litre.
Combining the warmth of copper and the finesse of a brushed finish, Brushed Copper brings a feeling of luxury to any space. Varilight decorative wiring accessories are British made and covered by the Varilight lifetime guarantee.
The Grohe Toilet Brush Set in Brushed Cool Sunrise is a stylish and functional addition to your bathroom. Designed to complement modern decor, this set offers both elegance and practicality.
High-Quality Material: Crafted from durable materials for long-lasting use.
Elegant Design: The brushed finish adds a touch of sophistication to your bathroom.
Easy to Clean: The removable brush head makes maintenance simple.
Compact Size: Fits neatly in any bathroom space without taking up too much room.
Complete Set: Includes a toilet brush and holder for convenience.
John Guest push-fit polypropylene Speedfit to Speedfit push-fit shut off valve isolates supply to a fixture or appliance. Fast and simple to install, John Guest valves create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. John Guest push-fit valves are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance. Manufactured in polypropylene with an EDPM O-Ring, the valve offers greater chemical resistance than the push-fit acetal valve and is suitable for potable water (10 bar at 20°C), intermittent hot water (4 bar at 60°C), water treatment and purification applications. All John Guest fittings are manufactured and assembled in the UK. Durable polypropylene shut off valve with EDPM O-Ring offers high chemical resistance Integral 1/4 turn isolation valve Instant push-fit connection and leak tight seal Connect, disconnect and reconnect in seconds without tools No scale build up improves performance and equipment lifespan Superior flow characteristics Suitable for potable liquid, intermittent hot water, water treatment and purification applications. Not suitable for compressed air, vacuum, explosive gases, petroleum spirit or other fuel or heating systems. Compatible with LLDPE or soft metal pipe/tubingPack of 2
John Guest push-fit polypropylene Speedfit to Speedfit push-fit shut off valve isolates supply to a fixture or appliance. Fast and simple to install, John Guest valves create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. John Guest push-fit valves are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance. Manufactured in polypropylene with an EDPM O-Ring, the valve offers greater chemical resistance than the push-fit acetal valve and is suitable for potable water (10 bar at 20°C), intermittent hot water (4 bar at 60°C), water treatment and purification applications. All John Guest fittings are manufactured and assembled in the UK. Durable polypropylene shut off valve with EDPM O-Ring offers high chemical resistance Integral 1/4 turn isolation valve Instant push-fit connection and leak tight seal Connect, disconnect and reconnect in seconds without tools No scale build up improves performance and equipment lifespan Superior flow characteristics Suitable for potable liquid, intermittent hot water, water treatment and purification applications. Not suitable for compressed air, vacuum, explosive gases, petroleum spirit or other fuel or heating systems. Compatible with LLDPE or soft metal pipe/tubingPack of 3
John Guest push-fit polypropylene Speedfit to Speedfit push-fit shut off valve isolates supply to a fixture or appliance. Fast and simple to install, John Guest valves create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. John Guest push-fit valves are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance. Manufactured in polypropylene with an EDPM O-Ring, the valve offers greater chemical resistance than the push-fit acetal valve and is suitable for potable water (10 bar at 20°C), intermittent hot water (4 bar at 60°C), water treatment and purification applications. All John Guest fittings are manufactured and assembled in the UK. Durable polypropylene shut off valve with EDPM O-Ring offers high chemical resistance Integral 1/4 turn isolation valve Instant push-fit connection and leak tight seal Connect, disconnect and reconnect in seconds without tools No scale build up improves performance and equipment lifespan Superior flow characteristics Suitable for potable liquid, intermittent hot water, water treatment and purification applications. Not suitable for compressed air, vacuum, explosive gases, petroleum spirit or other fuel or heating systems. Compatible with LLDPE or soft metal pipe/tubingPack of 4
The Loctite 60 Second All Purpose Glue has a colourless, ultra-thick gel formula that prevents dripping and bonds all materials within 60 seconds. Objects are repositionable for up to 40 seconds. It builds up a strength of +100kg/cm2 within 24 hours. The glue will bond to most materials, porous and non-porous, as well as flexible materials and objects exposed to stress. It is ideal for larger applications thanks to its tailored formula and its bigger tube.
John Guest push-fit polypropylene Speedfit to Speedfit push-fit shut off valve isolates supply to a fixture or appliance. Fast and simple to install, John Guest valves create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. John Guest push-fit valves are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance.
Manufactured in polypropylene with an EDPM O-Ring, the valve offers greater chemical resistance than the push-fit acetal valve and is suitable for potable water (10 bar at 20°C), intermittent hot water (4 bar at 60°C), water treatment and purification applications. All John Guest fittings are manufactured and assembled in the UK.
Durable polypropylene shut off valve with EDPM O-Ring offers high chemical resistance
Integral 1/4 turn isolation valve
Instant push-fit connection and leak tight seal
Connect, disconnect and reconnect in seconds without tools
No scale build up improves performance and equipment lifespan
Superior flow characteristics
Suitable for potable liquid, intermittent hot water, water treatment and purification applications. Not suitable for compressed air, vacuum, explosive gases, petroleum spirit or other fuel or heating systems.
Compatible with LLDPE or soft metal pipe/tubing
Pack of 6
Unifix Wing Nuts Bright Zinc Plated UNI 5448 are designed for easy fastening and secure connections. With a size of M5 x 0.80, these wing nuts are perfect for various applications, ensuring reliability and durability.
High-Quality Bright Zinc Plated Finish for Corrosion Resistance
Easy to Install with Hand Tightening
Ideal for Use in DIY and Professional Projects
Compatible with M5 Screws for Versatile Use
Durable Construction for Long-Lasting Performance
Always use a JG Speedfit cold water service pipe insert push-fit fitting when connecting Speedfit MDPE fittings to a compression fitting. Inserts play a vital role in providing extra support to pipework, ensuring that the ends of the pipe are kept nice and round, and minimising any loss of shape that can occur when cutting. Designed and manufactured in the UK.
Enhances sealing for a securer connection
Maintains structural integrity of the pipe connection
Compatible with MDPE pipe
Suitable for cold water use only
The Unifix Wing Nuts Bright Zinc Plated UNI 5448 are designed for reliable fastening in various applications. With a size of M12 x 1.75, these wing nuts provide a secure grip and easy installation.
High-Quality Bright Zinc Plated Finish for Durability
Easy to Install with Hand Tightening
Ideal for Use in DIY and Professional Projects
Compatible with M12 Threaded Rods
Perfect for Quick Assembly and Disassembly
The Unifix Wing Nuts Bright Zinc Plated UNI 5448 - M3 x 0.50 are designed for easy fastening and secure connections in various applications. Made from high-quality materials, these wing nuts provide reliable performance for both DIY enthusiasts and professionals.
Durable Bright Zinc Plated finish for corrosion resistance
Easy to install with hand-tightening feature
Compatible with M3 x 0.50 threaded applications
Ideal for use in furniture assembly and repairs
Lightweight design for convenient handling
Unifix Wing Nuts Bright Zinc Plated UNI 5448 are designed for reliable fastening in various applications. With a size of M8 x 1.25, these wing nuts provide a secure grip and easy installation.
High-Quality Bright Zinc Plated Finish for Durability
Easy to Install with Hand Tightening
Ideal for Use in DIY and Professional Projects
Compatible with M8 Threaded Rods
Perfect for Quick Assembly and Disassembly
The Grohe Mono Basin Mixer Pop Up Waste in Chrome is a stylish and functional addition to any modern bathroom. Designed for ease of use and installation, this basin mixer combines elegance with practicality.
High-Quality Chrome Finish: Ensures durability and a sleek look.
Easy Installation: Designed for quick and hassle-free setup.
Pop Up Waste Feature: Convenient waste management for your basin.
Modern Design: Complements contemporary bathroom aesthetics.
Reliable Performance: Engineered for smooth operation and longevity.
Main Product Description: The FloPlast Niagara Union Bracket is a high-capacity PVC-U domestic rainwater system with a traditional ogee style profile. It features a revolutionary designed moulded water-tight seal and retaining clip for easy installation, suitable for both old and new properties.
Features:
- Traditional ogee style profile
- High capacity PVC-U domestic rainwater system
- Revolutionary designed moulded water-tight seal and retaining clip
Benefits:
- Enhances property aesthetics with traditional design
- Improves functionality with high capacity system
- Simplifies installation process with user-friendly features
Main Product Description:
FloPlast Cast Iron Effect Soil Access Pipe - Single Socket.
Features:
- Suitable for use with 110mm diameter pipes.
- Ring seal push fit socket on the top end and a plain spigot end at the bottom.
- Spigot end is the same size as 1110mm pipe, allowing connection to other fittings or pipes.
- Available in black color.
- Covered by a manufacturer's 20-year 'cast iron' guarantee.
Benefits:
- Authentic cast iron appearance with the advantages of a PVC system.
- Durable and long-lasting due to the 20-year guarantee.
- Meets various British Standards for plumbing and fire safety.
The Makita DCL180 Handheld Vacuum offers a strong suction power and a large dust capacity, ideal for heavy-duty applications. It produces low noise levels making it ideal for quieter cleaning operations, especially suited to domestic and residential areas. It is fitted with an ergonomic rubber handle that helps to reduce fatigue during prolonged use. Bare Unit, No Battery or Charger Specification: Capacity: 0.65 litresMax. Airflow: 1.3 m³/min.Max. Sealed Suction: 3.6 kPaWeight: 1.2kg
Main Product Description:
FloPlast Push Fit Waste Bend 92.5 Degree, available in black and various sizes including 32mm and 40mm, is an easy-to-install solution for waste pipelines. It is constructed from durable polypropylene material and does not require solvent welding or tightening. The swept design provides a smooth flow and self-cleaning properties.
Features:
- Easy installation using a push-fit seal system.
- Constructed from strong polypropylene material.
- No solvent welding or tightening needed.
- Available in different sizes, such as 32mm and 40mm.
- Promotes a self-cleansing flow due to its swept design.
Benefits:
- Quick and simple installation process.
- Durable construction ensures long-lasting performance.
- Offers flexibility in selecting appropriate sizes for specific applications.
- Enhances hygiene through self-cleansing capabilities.
The Unifix Grade 8.8 High Tensile Hexagon Setscrews DIN 933 Bright Zinc Plated - M12 x 70 are designed for high tensile applications, providing reliable fastening solutions for various projects.
High Tensile Strength: Grade 8.8 ensures durability and reliability.
Versatile Use: Ideal for construction, automotive, and machinery applications.
Corrosion Resistant: Bright Zinc Plated finish offers protection against rust and wear.
Easy Installation: Hexagon head design allows for simple tightening with standard tools.
Precision Engineering: Manufactured to DIN 933 standards for consistent quality.
The JCP Fixings A4-316 Stainless Steel ETA Option 7 Throughbolts are designed for heavy-duty applications, providing reliable fastening solutions in various construction projects.
High-Quality A4-316 Stainless Steel for Durability
Designed for Heavy-Duty Applications
Easy Installation with Push Fit Design
Corrosion Resistant for Long-Lasting Performance
Suitable for Use in Concrete and Masonry
The Makita UC4051A Electric Chainsaw has a longitudinal motor for greater manoeuvrability. An adjustment lever provides tool-less tension adjustment of the saw chain. Its oil pump keeps the delivery of chain oil constant, regardless of temperature and the oil viscosity. Fitted with an ergonomic soft grip for added user comfort. The electronic current limiter provides overload protection. There is also a kickback brake for increased user safety. Specification: Input Power: 2,000W Chain Speed: 14.5m/sec.Chain: Gauge: 0.050inPitch: 3/8inBar Size: 40cmChain Oil Capacity: 200mlWeight: 5.7kg
The JCP Fixings ETA Option 1 Throughbolts Bright Zinc Plated - M10 x 110 are designed for reliable and robust fastening in various applications. Ideal for heavy-duty use, these throughbolts ensure a secure hold in concrete and masonry.
High-Quality Bright Zinc Plated Finish for Corrosion Resistance
Designed for Heavy-Duty Applications
Easy Installation with Push Fit Design
Compatible with Various Materials
Durable Construction for Long-Lasting Performance
The JCP Fixings A4-316 Stainless Steel ETA Option 1 Throughbolts are designed for heavy-duty applications, providing reliable fastening solutions in various construction projects.
High-Quality A4-316 Stainless Steel for Durability
Designed for Heavy-Duty Applications
Easy Installation with Push Fit Design
Corrosion Resistant for Long-Lasting Performance
Ideal for Use in Concrete and Masonry
The Makita DTD153 Brushless Impact Driver is fitted with an energy efficient brushless motor that uses less energy and provides a longer run time. Speed is controlled via the variable speed trigger and features forward/reverse rotation. Fitted with a one touch sliding chuck for easy bit installation and removal. Its ergonomically designed soft grip handle increases comfort and reduces fatigue. Other features include a built-in twin job light and belt clip. Specification: Bit Holder: 6.35mm (1/4in)No Load Speed: 0-3,400/min.Impact Rate: 0-3,600/bpmMax. Torque: 170NmCapacity: Machine Screw M4-M8, Standard Bolt M5-M16, High Tensile Bolt M5-M14Coarse Thread Length Capacity: 22-125mmWeight: 1.3kg
