These ForgeFix traditional slotted, single thread Wood Screws have countersunk heads and can be used in many internal and external applications. They have a solid brass construction to avoid corrosion. APPLICATION:Used for both decorative and in applications where the screw may come in to contact with the elements avoiding corrosion.Can be used with all manner of wall plugs. Slotted screw driver required. With Slotted screwdrivers it is important to ensure that the tip matches the width of the screw slot, otherwise you run the risk of damaging the screw head. Slotted screwdrivers are available with either Flared or Parallel tips. For the majority of uses the Flared tip is ideal but if the screw needs to be driven below the material surface a Parallel tip screwdriver should be used. Countersunk heads are designed to sink flush with substrates to leave a smooth surface finish. The single threads have been designed to offer higher pull out values and quicker insertion.Wood Screw Slotted Countersunk Solid Brass 1/2 x 6 Box 200
The JCP Fixings A4-316 Stainless Steel ETA Option 7 Throughbolts are designed for heavy-duty applications, providing reliable fastening solutions in various construction projects.
High-Quality A4-316 Stainless Steel for Durability
ETA Option 7 Certification for Safety and Reliability
Ideal for Use in Concrete and Masonry
Easy Installation with M20 x 180 Size
Perfect for Heavy-Duty Applications
The Forgefix Sanitary W.C. Fixing Kits are strong and reliable. They are extremely easy to fit, and the decorative caps leave an attractive, clean finish. The edge of the plug cleanly closes off the drill-hole in the porcelain and enables the cap to snap fit securely. The zinc screw with hexagon and part flat shank enables straightforward installation. APPLICATION:Designed for fixing WC’s. Size: M6 x 80mm.
A heavy-duty all steel jerry can featuring a lockable filler cap fitted with a rubber seal to prevent leaks and evaporation. Cans are painted both internally and externally to inhibit corrosion and are certified to UN standards for the storage of Group II flammable liquids. The storage and transportation of flammable liquids for domestic and commercial purposes are covered by extensive government legislation (The Petroleum Consolidation Regulations 2014) (PCR). It is the user’s responsibility to ensure that these regulations are fully observed and that all legal requirements are met. Full details relating to the storage and transportation of flammable liquids are available from the HSE (Health and Safety Executive) government website www.hse.gov.uk. NOTE: these cans are not suitable for the storage of drinking water.Size: 20 Litre.
The Unifix Grade 8.8 High Tensile Hexagon Setscrews DIN 933 Bright Zinc Plated - M10 x 130 are designed for high tensile applications, ensuring durability and reliability in various fastening tasks.
High Tensile Strength: Grade 8.8 ensures superior strength for demanding applications.
Corrosion Resistant: Bright Zinc Plated finish provides protection against rust and corrosion.
Versatile Use: Ideal for construction, automotive, and machinery applications.
Easy Installation: Hexagon head design allows for easy tightening with standard tools.
Reliable Performance: Manufactured to DIN 933 standards for consistent quality.
Fiskars GS46 Servo Grass Shear Long feature the Servo-System, which prevents the blades from jamming to guarantee non-interrupted, efficient cutting. They have an ergonomic, lightweight design that is comfortable and user-friendly. The flexible cutting head is adjustable by up to 360°, allowing the shears to easily reach awkward places. The blades are made of hardened stainless steel, the handles of fibreglass reinforced polyamide and the shears are provided with a thumb-operated lock mechanism. Length: 101cm.Weight: 650g.
The Fiskars 135714 Solid™ Cultivator has hardened carbon steel prongs for loosening and tilling the soil before planting. The rounded aluminium shaft makes it extremely durable, and lightweight. Easy to store thanks to intergrated hanging holes. The Fiskars Solid™ Range are all-purpose tools constructed for durability, that won’t let you down. Specification Length: 1640mm.Head Width: 117mm.Weight: 660g.
These Forgefix Threaded Rods are made of A2 stainless steel, which will not corrode, rust or stain from water. This makes them ideally suited for corrosive and coastal applications as well as many other varied applications. They can be used with many other products including Drop in Anchors and Masonry Anchor Shields, and provide a cost effective fastening for many applications. Conform to DIN 975 standards. APPLICATION:Used widely in the soft furnishing trades where strong timber connection is required. Also extensively used in Playground and Climbing Wall manufacturing.Ideal for use in chemical fixing applications where non standard sizes are required. A2 Type 304 Stainless Steel can also be called 18/8 because it contains approximately 18% Chromium and 8% Nickel. It is austenitic steel and is non-magnetic. The chromium provides a corrosion and oxidation resistance, although it may tarnish. It is immune to foodstuffs, sterilising solutions, most organic chemicals and dyestuffs and also a wide variety of inorganic chemicals. As such, it is used extensively for many types of fixings and fasteners used in sanitary or hygiene applications.Threaded Rod Stainless Steel M8 x 1m Box 1
The JCP Fixings ETA Option 1 Heavy Duty Anchors Hexagon Bolt Bright Zinc Plated CE - 12mm/M8 x 125 is designed for robust applications requiring secure fastening. Ideal for heavy loads, this anchor provides reliable performance in various construction projects.
High-Quality Bright Zinc Plated Finish for Corrosion Resistance
12mm Diameter and 125mm Length for Versatile Use
Designed for Heavy Duty Applications
Easy Installation with Hexagon Bolt Design
Compliant with CE Standards for Safety
The Einhell TE-MS 18/210 Li Solo Mitre Saw is a member of the Power X-Change family, it is a versatile tool for use in the work shed, garage and hobby room. Quickly adjustable settings make it possible to perform work on materials such as wood, panels, all sorts of plastic, or parquet flooring with almost effortless ease. The turntable has an exact angle adjustment facility for angular cuts. The saw head can be tilted to the left for exact mitre cuts. X-Tend workpiece supports enable the settings to be adjusted with just one hand and without the need for any tools. For repeat cutting there is an integrated limit stop. The high-quality carbide-tipped precision saw blade was developed specially for cordless saws. The sawdust bag or the chip extraction system (extractor connection Ø36mm) help keep the workplace clean and tidy and prevent the accumulation of dust in the air. The compact and low-weight design along with the carry handle make it easy to transport. Other features include: an integrated clamp, cutting line laser and an LED work light. Bare Unit, No Battery or Charger Supplied. Recommendation for best results: 2.6Ah Plus battery or higher. Specification: No Load Speed: 3,000/minBlade: 210 x 30mm BoreMitre Cut: 45° - 0°Swivelling Range: 47° - 47°Cutting Capacity: 90° x 90°: 120 x 60mm, 90° x 45°: 83 x 60mm, 45° x 90°: 120 x 34mm, 45° x 45°: 80 x 34mmSuction Adaptor: Ø36mmWeight: 7kg
The DEWALT DCN680 Brushless XR 18 Gauge Brad Nailer has a compact, lightweight and ergonomic design that makes the tool easy and comfortable to use but durable enough for the work site environment. Mechanical rather than gas operation offers low running costs and consistent performance, even at low temperatures. Fitted with a brushless motor that offers increased runtime and durability. Trigger and contact trip lock-off prevent accidental discharge of fastener. With tool free stall/jam clearance to minimise down time. The depth of drive can be easily adjusted using the thumb wheel depth adjuster. Two modes of operation: Sequential mode allows for precision placement, Bump operating mode provides the user with production speed of up to 4 nails per second. DCN680D2: 2 x 18 Volt 2.0Ah Li-Ion Batteries.DCN680N: Bare Unit, No Battery or Charger. Specification Magazine Capacity: 110.Fires: Nails: Length: 15-54mm. Diameter: 1.25mm.Nailer Operating Mode: Bump & Sequential.Magazine Angle: 0°.Weight: 2.4kg.The DEWALT DCN680N Brushless XR 18 Gauge Brad Nailer is supplied as a Bare Unit, NO battery or charger.
The Lessmann Wheel Brushes are filled with crimped wire and are used for obtaining different surface finishes. For the removal of rust, paint and dirt, for roughening, de-burring. Stripping or polishing. A decisive factor for choosing the most suitable brush is the wire and tube diameter. Brushes with a larger tube diameter are filled with more wire, are more aggressive and have a longer life. Some of the brushes are supplied with adaptor sets that allow easy mounting on all popular grinding machines. The adaptors have the following dimensions: Set 1: 30, 22.2, 20, 16 & 12mm, 1in & 1/2in. Set 2: 40, 32, 22.2, 20, & 16mm, 1in & 1/2in.Set 3: 50, 32, 22.2, 20, & 16mm, 1in & 1/2in.Set 4: Brushes With Metal Discs Bore 50.8 & Double Keyway 7x13; Plus Adaptor to Bore 30.Diameter. 250mm.Width.30-35mmMin/Max Bore: 20/100mm. Wire Gauge.0.30.Wire Type. Steel Crimped.Max R.P.M. 3,600.
This Kent & Stowe Metal Watering Can has the following specification: Colour: Tweed GreenSize: 4.5 litre The Kent & Stowe Metal Watering Can has been beautifully crafted from strong steel. Galvanised for strength, it has a powder-coated finish and is also rust-resistant. This watering can has a handy folding handle as well as a detachable watering rose, making it easy to use and store. Perfect for garden decor and everyday watering.
Gardman Jute Twine is the ideal twine for several home and garden tasks. Great for tying back plants such as growing tomatoes as well as use with many other home and garden tasks. Made from 3 ply jute for extra natural strength. It's also biodegradable.Draw twine from centre of the spool.
1 x Gardman Green Jute Twine 500g.
The DEWALT DCG418X2 XR FlexVolt Grinder is supplied with: 2 x 54V 9.0Ah Li-ion Batteries1 x Side Handle1 x Keyless Guard1 x Blade Wrench1 x DCB116 Charger1 x TSTAK™ II Carry Case
The DeWalt Metal Cutting Disc, a professional aluminium oxide grain bonded abrasive disc, has been designed for cordless tools to maximise life and performance. For general metal cutting work on stainless steel, ferrous and non-ferrous metals. Size: 125 X 1.2 X 22.23mm.
This Gardman Galvanised Wire Netting has the following specification: Length: 10mWidth: 0.9mMesh: 13mm² Gardman Galvanised Wire Netting has various uses around the garden, including fencing and cages as well as a strong support for climbing plants. The hexagon holes are useful for crop protection. Made from flexible and strong self-supporting wire, this galvanised mesh will withstand all weathers throughout the seasons. 5-year guarantee.
This Bahco small weeding fork is suitable for loosening, cleaning and levelling the ground before planting. It is ideal for weeding between plants in borders and for transplanting. It is also ideal for harvesting root vegetables like radishes or carrots on small plots. With a head made of fully hardened steel, it is highly durable and its epoxy powder coating ensures protection against rust.The weeding fork has a comfortable handle with round shape made of polypropylene with a soft grip. Length: 300mm. Weight: 199g.
This Flopro Accessory Adaptor converts your watering products from female to male connections. Use this adaptor to enable a snap-fit connection to your watering accessories such as sprinklers. You can also use it to connect to a water source with a female thread. Made from premium grade plastic, UV resistant.Allows a snap-fit to all major watering brands, which means you can use it with the equipment you already have at home. Specification: Diameter: Threaded 3/4in BSP.
The Flopro Softflo Watering Lance has a unique setting to mix water and air for a gentle water flow that does not harm the plants, flowers, or roots. Length: 83cm
The Bahco 9-in-1 Switch Cabinet Master Key is suitable for all the usual technical shut-off systems. It has a varnished plastic body with a practical securing chain and snap-hook. The key profiles are zinc die-cast for increased durability. The Master Key has 8 different keys, which are fitted on a double turning mechanism, allowing good positioning. In addition, the body houses a 5mm square key suitable for aerating radiator valves and a 1/4 inch magnetic bit holder. It has the following functions: 4 x Square: 5, 6, 7-8 & 9-10mm. 3 x Triangular: 7, 8-9 & 10-11mm. 1 x Two-way: 3-5mm. 1 x Half-moon: 6mm.
This Makita B-33526 Specialized for Metal Cutting Saw Blade has the following specifications: Blade Diameter: 136mm.Bore: 20mm.Kerf: 1.5mm.Teeth: 30T.Max. Speed: 4,500/min.
The Makita DMR056 LXT Radio Lantern functions both as a lantern, with 360 degree light coverage, or a flashlight. It can also operate as a strobe light. A slow light up sequence helps to protect your eyes, while the On/Off mode select button is equipped with memory function so it remembers the last brightness and light tone setting. Its easy to read LCD digital display allows you to select between; AM/FM, Bluetooth, and DAB/DABand Radio stations, with the option to save your favourite stations. There is also a USB output port for charging small devices. Supplied with 1 x Strap Hook. Comes as a Bare Unit, NO battery or charger supplied. Specifications: Frequency Range: DAB: Band III 5A - 13F, FM: 87.50 - 108 Mhz.Light Tone/Colour: Daylight White, Neutral White, Warm White.Lantern Luminous Flux High/Low: 310/155, 300/150, 260/130.Flashlight Luminous Flux High/Low: 200/100.
The Makita DBO480 LXT Finishing Sander is equipped with a 2-speed electronic speed control system and a tool-less paper clamp for quick working. A redesigned balancer reduces the tool vibration in loaded operation.This Makita sander is ergonomically designed to provide the best possible grip for comfortable handling, and dust is kept to a minimum, in two ways, either thanks to the rear mounted bag or the dust port can be used to attach a dust extractor. The perfect tool for carpenters, fitters, joiners and DIY enthusiasts. Comes as a Bare Unit, NO battery or charger supplied. Supplied with: 1 x Triangle Plate, 1 x Dust Bag, 1 x Abrasive Paper Set, 1 x Dust Bag Nozzle, 1 x Dust Nozzle and 1 x Punch Plate. Specifications: Oscillating Speed: 28,000/22,000/min.Orbits per Minute: 14,000/11,000/opm.Orbit Diameter: 1.5mm.Paper Fastening: Hook & Loop or Clamp.Pad Size: 112 x 102mm.Paper Size: 114 x 102mm.Weight: 1.4kg.
The Bahco 9627 Series Long Combination Auger Bit is longer than a standard auger bit, designed for long reach applications. Made from hardened tool steel, lacquered for rust protection. Spirals with Levin pattern. Can be used in both electric power drills and hand braces. The threaded tip moderates a self-feed when using a power drill, but still sufficient self-feed when used in a hand brace. For quick precision cutting with all types of wood.This Bahco 9627 Series Long Combination Auger Bit has the following specification: Size: 10mmWorking Length: 385mmOverall Length: 460mm
The Flopro Everyday Hose is a quality 12.5mm garden hose pipe which is weatherproof with UV and frost protection. It will withstand temperatures from -20 degrees to 60 degrees, giving you peace of mind all year round. Crafted with a durable 3 layer structure and braided reinforcement, this hose is designed to help prevent twists and kinks while remaining remarkably flexible during use. Ideal for everyday use, plus you can enjoy the assurance of a 10 year guarantee too.
The Makita DDF083 Drill Driver has a brushless motor for increased power and run time. Whilst the variable speed trigger and 2 mechanical gears provide increased control. It offers both forward and reverse rotation. The body is fitted with an ergonomically designed comfort grip for increased user comfort. For added user safety there is an electric brake. Other features include a belt clip and LED job light. Comes as a Bare Unit, No Battery or Charger. Specification: Bit Holder: 6.35mm (1/4in)No Load Speed: 0-500/0-1,700/min.Torque Settings: 20 + DrillMax. Torque: 23/40NmCapacity: Wood 36mm, Steel 13mmWeight: 1.1kg
