DEWALT ELITE SDS+ Full Head Carbide 4 Cutter Drill Bits are ideal for drilling holes into reinforced concrete. Designed to resist breakage when striking rebar. The tapered core increases strength and resists flute breaks. DEWALT ELITE SERIES Drill Bits are ideal for drilling holes in concrete, and the high speed blasting strengthens the bit to reduce the risk of breakage. The 4 cutter carbide head provides maximum performance.
This DEWALT ELITE SDS+ Full Head Carbide 4 Cutter Drill Bit has the following specification:Diameter: 16.0mm.Overall Length: 250mm.Working Length: 200mm.
The DEWALT Extreme Cement Saw Blade features synthetic PCD (Polycrystalline Diamond) tipped teeth. These PCD coated teeth provide 100% longer life in fibre cement than TCT tipped blades. The laser cut blade features anti-vibration body slots and precision ground tips. The blade design also helps to reduce dust production when cutting fibre cement materials. Suitable for cutting a range of materials including fibre cement board, laminate/pre finished flooring, MDF, plywood, etc.This DEWALT Extreme PCD Fibre Cement Saw Blade has the following specification: Blade Diameter: 305mm.Bore Size: 30mm.Tooth Count: 16.Kerf Thickness: 2.4mm.Plate Thickness: 1.8mm.Grind: FTOP.Rake Angle: 12°.
The DEWALT Extreme 2 Metal Drill Bit is suitable for portable or stationary drilling of steel, alloyed and non alloyed, up to 900N/mm. Particularly suited to drilling sheet or thin materials where accurate burr-free holes are required. Very effective in wood and plastic materials. The patented split pilot point design eliminates walking/slipping on contact.This DEWALT Extreme 2 Metal Drill Bit has the following specification: Tip Diameter: 13mm.Working Length: 98mm.Overall Length: 151mm.Pack Quantity: 10.
DEWALT offers a range of chisels covering most common applications. They are made from specially toughened steel that has been through a micro-processor controlled heat treatment that ensures tough, durable chisels with a long life. Ideal for light chipping and chiselling of tile, mortar, glazing compounds and other masonry products with hammers with a rotation stop feature.1 x DEWALT SDS-plus Steel Point Chisel 250mm
The DEWALT SDS-Plus EXTREME 2®Drill Bit is made from superior carbide grade for long life and greater durability. The hardened body adds further strength and helps to reduce breakage. Its optimised flute design provides efficient debris removal whilst the tip design ensures better bit penetration.This DEWALT SDS-Plus EXTREME 2® Drill Bit has the following dimensions: Diameter: 20mmWorking Length: 400mmOverall Length: 450mmPack Quantity: 1
Discover the reliability of Unifix Grade 10.9 Flange Socket Button Head Screws, designed to meet ISO 7380-2 standards. These screws are perfect for a variety of fastening applications, ensuring a secure fit and durability.
High Strength: Grade 10.9 steel provides exceptional tensile strength.
Corrosion Resistant: Bright Zinc Plated finish offers protection against rust and wear.
Easy Installation: Flange design allows for quick and secure fastening.
Versatile Use: Ideal for both DIY projects and professional applications.
Standard Compliance: Manufactured to ISO 7380-2 specifications for quality assurance.
Quantity: Box of 200 screws.
The DEWALT XPC Jigsaw blades have a optimised tooth angle which provides long life and clean tear-free cuts at high speeds in all wood materials. With a thicker blade body, increased taper angle and optimised tooth geometry for greater accuracy and control of cut. They have a slim narrow angled tooth design for clean cutting with less material breakout. The Plunge Point™ tip allows for easy plunge cutting into all wood and wood substitute materials. Optimum tooth geometry provides increased blade and tooth strength and premium steel body for longer blade cutting life. Larger deeper gullets between teeth for easier wood chip removal and faster cutting. For use in hard and soft woods including laminates, plywood, chipboard and plastics.The DEWALT DT2220-QZ (T144DF) XPC Bi-Metal Wood Jigsaw Blades provide fast straight cuts in hard wood, chipboard, plywood and MDF. Bi-Metal products provide an increased life, up to 2 x life of standard HCS blades.
Box of 25 MasonMate Galvanised Through Bolts M12 x 145mm. The MasonMate Galvanised Through Bolts built for use in non-cracked concrete or solid stone. Easy to install. It has a strike cap to prevent thread damage. Comes with an A2 stainless steel clip. Anchor body grade 5.8, hex nut grade 8. M12 x 145mm (25)
Box of 100 MasonMate Hex Concrete Screwbolts M6 x 50mm. The MasonMate Hex Concrete Screwbolts are ideal for anchoring in concrete, blocks, brick and stone. Zinc plated for increased durability with a self-tapping thread design. M6 x 50mm (100)
DEWALT ELITE SDS+ Full Head Carbide 4 Cutter Drill Bits are ideal for drilling holes into reinforced concrete. Designed to resist breakage when striking rebar. The tapered core increases strength and resists flute breaks. DEWALT ELITE SERIES Drill Bits are ideal for drilling holes in concrete, and the high speed blasting strengthens the bit to reduce the risk of breakage. The 4 cutter carbide head provides maximum performance.
This DEWALT ELITE SDS+ Full Head Carbide 4 Cutter Drill Bit has the following specifications:Diameter: 14.0mm.Overall Length: 200mm.Working Length: 150mm.
DEWALT Impact Multi Material Drill Bits for use in impact drivers. Its Carbide head design allows faster drilling and longer durability. Suitable for wood, plastics, concrete, brick, light building materials, multi-layer materials and masonry.This DEWALT Impact Multi Material Drill Bit has the following specifications: Diameter: 5.0mm.Overall Length: 77mm.Working Length: 45mm.
The DEWALT SDS-Plus EXTREME 2®Drill Bit is made from superior carbide grade for long life and greater durability. The hardened body adds further strength and helps to reduce breakage. Its optimised flute design provides efficient debris removal whilst the tip design ensures better bit penetration.This DEWALT SDS-Plus Extreme 2 Drill Bit has the following dimensions: Diameter: 10mmWorking Length: 300mmOverall Length: 350mmPack Quantity: 1
The DEWALT Extreme 2 Metal Drill Bit is suitable for portable or stationary drilling of steel, alloyed and non alloyed, up to 900N/mm. Particularly suited to drilling sheet or thin materials where accurate burr-free holes are required. Very effective in wood and plastic materials. The patented split pilot point design eliminates walking/slipping on contact.This DEWALT Extreme 2 Metal Drill Bit has the following specification: Tip Diameter: 12.0mm.Working Length: 98mm.Overall Length: 151mm.Pack Quantity: 10.
DEWALT Impact Multi Material Drill Bits for use in impact drivers. Its Carbide head design allows faster drilling and longer durability. Suitable for wood, plastics, concrete, brick, light building materials, multi-layer materials and masonry.This DEWALT Impact Multi Material Drill Bit has the following specifications: Diameter: 8.0mm.Overall Length: 80mm.Working Length: 65mm.
The 5 Piece DeWALT DT20777 Mixed Multitool Blade Set. The blades are made from SY090 high-speed steel and finished with a next-generation TiN bi-metal coating. Durable ink-jet markings keep size and material information clearly visible. Universal fitment allows you to clip straight onto leading multi-tools from DeWalt, Fein, Milwaukee, Makita and Bosch.Contains:1 x 3-Sided Bi-Metal Multitool Blade 54mm 2 x Bi-Metal Plunge Point Multitool Blades 32mm 2 x HCS Wood Cutting Multitool Blades 32mm
The DEWALT Torsion Pozi Bits have a hardened core for extra strength and durability. They have a flexible torsion zone absorbs torque peaks and reduces breakage (Torsion bits only). The design features extra grip ribs that grip the screw and reduce slipping (specific bits only). They are tough quality, professional screwdriver bits.DEWALT DT7213 Torsion Bits PZ3 25mm Pack of 5
The DEWALT Sanding belts have a heavy-duty backing cloth, resin bonded for use with belt sanders. They provide excellent grain adhesion and heat resistance for power sanding and have a high quality aluminium oxide grain for fast, aggressive stock removal and fine finishing. Anti static bond and backing ensures more efficient dust extraction, improved finish and longer life. Applications: for all stripping, sanding and finishing tasks on wood, metal and painted surfaces.Pack of 3 DEWALT Sanding Belts 560 x 100mm 40g
The DEWALT SDS Max Drill Bit has a 4 cutter X-head design for improved user comfort, reduced vibration and improved hole quality. The 4-flute spiral maximises flute entry which increases drilling speed and debris removal with a heavy-duty shank for maximum durability.1 x DEWALT SDS Max Drill Bit 20 x 540mm
Box of 25 MasonMate Hex Concrete Screwbolts M14 x 100mm. The MasonMate Hex Concrete Screwbolts are ideal for anchoring in concrete, blocks, brick and stone. Zinc plated for increased durability with a self-tapping thread design. M14 x 100mm (25)
Box of 25 MasonMate Galvanised Through Bolts M12 x 115mm. The MasonMate Galvanised Through Bolts built for use in non-cracked concrete or solid stone. Easy to install. It has a strike cap to prevent thread damage. Comes with an A2 stainless steel clip. Anchor body grade 5.8, hex nut grade 8. M12 x 115mm (25)
Replacement DEWALT Oregon® Chainsaw Chain for the DEWALT DCM575 XR FlexVolt Chainsaw. Made from high-grade materials. The Lubri-Dam® oil-retaining feature that prevents oil from running out of the bar's tail, keeping more oil on the bar and chain.1 x DEWALT DT20663 Oregon® Chainsaw Chain 40cm (16in)
This DEWALT Extreme Runtime FlexVolt Blade has been specially designed for use with the DEWALT FlexVolt Mitre Saw. The sub-micron grade carbide teeth provide superb cutting performance and excellent, smooth chip removal. Ideal for cutting large, thick timbers and various other site materials. These FlexVolt blades offer the trade about twice the working life of standard alternative blades.This DEWALT Extreme Runtime FlexVolt Mitre Saw Blade has the following specification: Diameter: 250mmBore: 30mmTooth Count: 60
This Faithfull Rounded Long Tape has a 13mm wide blade that is clearly marked out with both imperial and metric measurements. The fibreglass tape is resistant to stretching, scuffs and is impervious to moisture. Its folding metal end claw provides a firm grip when hooked or pressed into the ground. The tape has large and clear measurement increments which are easy to read in almost all-weather conditions, and the tape is easy to clean if it becomes dirty. Stored in a tough closed ABS case, which has a folding metal rewind handle that allows the tape to be quickly rewound after use.Specification: Tape Length: 50m/160ftTape Width: 13mmAccuracy: EC Class III
The Unifix Grade 1 UNC Full Nuts BS 1768 Plain - 1/2"-13 are designed for reliable fastening in various applications. Made to meet industry standards, these nuts ensure durability and strength.
High-Quality Material: Crafted from robust materials for long-lasting use.
Standard Compliance: Meets BS 1768 standards for quality assurance.
Versatile Application: Suitable for a wide range of fastening needs.
Easy Installation: Designed for straightforward use in various projects.
Reliable Performance: Ensures secure fastening in demanding environments.
The Bond-It Masking Tape Buff is a versatile and essential tool for any painting or decorating project. Measuring 25mm in width and 50m in length, this high-quality masking tape ensures clean lines and protects surfaces from paint splatter.
High-Quality Adhesive: Provides strong adhesion while being easy to remove.
Versatile Use: Ideal for painting, decorating, and crafting projects.
Clean Lines: Ensures sharp paint edges and prevents bleed-through.
Easy to Tear: Convenient for quick application without the need for scissors.
Durable Material: Designed to withstand various conditions without losing effectiveness.
Quantity: Available in a box of 36 rolls.
The Teco Window Board Tie is designed for secure window installations, providing reliable support and stability. With dimensions of 147mm x 12mm x 2mm, this tie is perfect for various applications.
High-Quality Material: Made from durable materials for long-lasting use.
Easy Installation: Designed for quick and straightforward installation.
Versatile Use: Suitable for a range of window board applications.
Secure Fit: Ensures a tight and secure connection for window boards.
Compact Size: Ideal dimensions for various construction needs.
Copper conversion kit provides an easy connection from MDPE to copper using only an adaptor. The Plasson range of fittings provide a reliable and durable way of jointing water supply pipes, requiring no special tools to use effectively. WRAS Approved Product - will be accepted by water companies as suitable for drinking water systems. Adapts fittings - increases flexibility of use of standard fittings and reduces fitting usage. Connects to copper pipe - allowing any suitably sized fitting to be adapted to accept Copper pipe. Kit of parts - fit within the fitting nut/body to save space required to install. Approved for both coiled underground copper and straight length above ground copper. PN16 pressure rated. 0
The Panasonic EYC242LJ2G31 Twin Pack contains the following: 1 x 18V EY79A3 Smart Brushless Combi Drill drills holes easily with grip torque control, ensuring good progress, even under heavy load. The drill adjusts automatically between a fast rotation speed for lighter work and higher torque whenever the load increases. For maximum convenience and accuracy, the new 'tapping mode' allows automatic reverse without having to change the toggle. No Load Speed: 20-530/70-1,800/min.Torque Settings: 18Torque: Stalling Low/High 32/12Nm, Instant Low/High 50/40Nm 1 x 18V EY75A8 1/2in Impact Wrench with a newly designed hammer mechanism provides equal torque in forward or reverse for speedy assembly and disassembly. Bumper protection has been increased to reduce wear on housing surfaces, a tougher rubber helps avoid oil and solvent damage to grip areas. Improved metal battery contact liners provide extra durability in serial use applications. Bit Holder: 1/2in Square Drive with Ball DetentNo Load Speed: 0-1,000/0-1,500/0-2,500/min.Impact Rate: 0-1,900/0-2,900/0-3,600/bpmMax. Torque: 280NmTensile Bolt Capacity: Standard M6-M16, High M6-M12 Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries, 1 x EY0L82B31 Universal Li-ion Charger 14.4V-28.8V and 1 x T-Loc Carry Case.
Secure your pipes effectively with GM GALV Screw On Pipe Clips. Designed for 20mm (3/4") pipes, these clips provide a reliable solution for pipe installation and maintenance.
Durable Galvanised Steel Construction for Longevity
Easy Screw-On Installation for Quick Setup
Compatible with 20mm (3/4") Pipes for Versatile Use
Ideal for Both DIY and Professional Applications
Ensures Secure and Stable Pipe Positioning
The DEWALT DCN660 XR Brushless Second Fix Nailer with brushless motor technology, offering runtime that cannot be beaten in a compact package. It has a compact, lightweight and ergonomic design that makes the tool easy and comfortable to use, but durable enough for the worksite environment. The depth of drive can be easily adjusted using the handy thumb wheel depth adjuster. The mechanical rather than gas operation offers low running costs and consistent performance, even at low temperatures. Sequential mode allows for precision placement and the bump operating mode provides the user with production speed of up to 4 nails per second. For safety the nailer has a trigger and contact trip lock-off and prevents accidental dis-charge of fastener. The tool free stall/jam clearance minimises down time. DCN660P2: 2 x 18 Volt 5.0Ah Li-Ion Batteries.DCN660D2: 2 x 18 Volt 2.0Ah Li-Ion Batteries.DCN660N: Bare Unit, No Battery or Charger Supplied. Specification Fires 16 Gauge Nails 32-63mm, Diameter: 1.6mmMagazine Angle: 20°.Magazine Capacity: 110 Nails.Magazine Loading: Rear Load.Trigger Type: Bump & Sequential.Size (LxWxH): 310 x 95 x 305mm.Temperature Range: -20 to 50°C.Weight: 2.7kg.DEWALT DCN660N XR Brushless Second Fix Nailer 18 Volt Bare Unit, No Battery or Charger Supplied.
Introducing the Plasson Elbow 25mm x 3/4" BSP Female 7150 (PL071500025007), a versatile and durable component designed for various plumbing and irrigation applications. This elbow is manufactured with high-quality materials, ensuring robustness and reliability in different environments.
Key Features:
- **Size and Thread**: The Plasson Elbow has a 25mm diameter and a 3/4" BSP female thread, making it suitable for connecting low-density poly pipes onto 3/4" female BSP solenoid valves and other female BSP fittings.
- **Material**: Constructed from durable materials, this elbow is designed to withstand the demands of various plumbing and irrigation systems.
- **Compatibility**: The Plasson Elbow is compatible with a wide range of plumbing components, allowing for seamless integration into your existing system.
- **Quality Assurance**: This product has been tested and approved by industry experts, ensuring that it meets the highest standards of quality and performance.
By choosing the Plasson Elbow 25mm x 3/4" BSP Female 7150 (PL071500025007), you're investing in a reliable and durable component that will help maintain the efficiency and effectiveness of your plumbing and irrigation systems.
The Bacho SE-15 Professional Bowsaw for all types of work, especially in building, gardening, farming and forestry applications. It comes complete as a saw with a peg toothed blade, type 51 (The teeth points are high-frequency, heat-induction hardened for long-lasting performance), for cutting dry wood and is powder painted steel tube for excellent rust protection with knuckle protector offering comfort and safety.1 x Bahco SE-15-24 Economy Bowsaw 600mm (24in)
Discover the strength and reliability of Unifix Grade 10.9 Socket Button Head Screws, designed to meet ISO 7380-1 standards. These screws are perfect for various applications requiring high tensile strength and durability.
High-Quality Grade 10.9 Steel for Maximum Strength
ISO 7380-1 Compliance Ensures Reliability
Bright Zinc Plated (BZP) Finish for Corrosion Resistance
Socket Head Design Allows for Easy Installation
Ideal for Heavy-Duty Applications in Various Industries
Bahco 3802 HSS Power Blade is a high speed steel powersaw blade designed for cutting almost any material. Suitable for use on modern machines with a high degree of control.Size 350mm (14 in) x 32mm (1 1/4 in) x 10 tpi
