The Rustins Scratch Cover is designed to mask unsightly surface scratches on wooden furniture and is manufactured in 3 shades: light, medium and dark, to suit different wood colours. Scratch Cover is made from a blend of beeswax, carnauba and paraffin wax. It is suitable for old and new furniture and is ideal for antique restoration.This Rustins Scratch Cover has the following specifications: Colour: DarkSize: 300ml
Rustins Cellulose Thinners are suitable for thinning all makes of cellulose paint and for cleaning brushes and equipment after use. 100% pure solvent.Rustins Cellulose Thinners. Size: 1 Litre.
Rustins Quick Dry Masonry Paint is a high quality, acrylic paint which is suitable for dry exterior masonry surfaces. To apply, use a large brush and apply evenly. The surface area must be clean, dry, free from dust and other contaminants likely to affect adhesion. No primer is required if fresh mortar has been applied to pointing. Do not use on damp surfaces. One coat is usually sufficient. Drying time: approx 30 mins, depending on temperature and humidity.Re-coat: 4 hours.Coverage: 14m² per 1 litre.Colour: Matt Cream.Size: 250ml.
Rustins Quick-Drying All Surface All Purpose (ASAP) Paint is a water based paint that dries to a satin finish. It resists flaking or peeling because of its flexible capabilities. ASAP has a low odour and does not require any priming. It is suitable for use on wood, metal, plastic, galvanised steel, uPVC, lead, glass, tiles, plaster, mdf, masonry and melamine.This Rustins ASAP Paint has the following specification: Colour: Cream.Size: 250ml.
Rustins Button Polish is suitable for French polishing wood where a more orange or golden tone is required and is suitable for sealing wood before waxing. When applied correctly, it will produce a high gloss finish. Alcohol evaporates rapidly leaving a film of shellac on the surface of the timber. For French polishing, apply as many coats as required to build a sufficient layer of shellac. For sealing wood before waxing, apply 2 liberal coats. Conforms to the Toys (Safety) Regulations 1995, BS:EN71 Part 3.Rustins Button Polish. Size: 500ml
Rustins Wood Dye for use on bare wood prior to finishing with any Rustins wood finishes.Quick drying penetrating stain, does not raise the grain. Supplied in a number of shades which may be intermixed to make an infinite variety of natural wood shades. Suitable for interior and exterior use. Conforms to the Toys (Safety) Regulations 1995, BS:EN71 Part 3.Rustins Wood Dye.Colour: Red Mahogany.Size: 1 Litre.
The Batavia CROC LOCK Side Support, affixed to the extension bars, provides a steady, flat surface to ensure secure support for long and large materials. Height adjustable and capable of carrying additional load. Made from durable steel material, easy to install.
The Estwing E322 Straight Claw Hammer has a one-piece forged steel construction, with Estwing's world famous blue shock reduction nylon vinyl grip. Offering comfort and durability whilst reducing vibrations caused by impact. This hammer is designed for framing work with its straight claw and longer handle. Made in the USA from high quality steel.Weight 790g (1 3/4 lb)
Rustins Wood Dye for use on bare wood prior to finishing with any Rustins wood finishes.Quick drying penetrating stain, does not raise the grain. Supplied in a number of shades which may be intermixed to make an infinite variety of natural wood shades. Suitable for interior and exterior use. Conforms to the Toys (Safety) Regulations 1995, BS:EN71 Part 3.Rustins Wood Dye.Colour: Light Teak.Size: 1 Litre.
The Weller 60W LED Halo Ring Soldering Iron offers 360 degree illumination of focused, bright light to aid visibility of the workpiece, ensuring high-quality solder joints. Fitted with an ergonomic moulded pencil grip that provides comfort, precision and control. Easily replace worn tips or change tip applications. An integrated safety rest holds the iron when not in use, reducing the risk of injury or damage to the workspace. Specification: Voltage: 230/240VInput Power: 60WMax. Temperature: 427 degreeCTip: Chisel 6.4mmCord Length: 1.5mWeight: 330gThis Weller 60W LED Halo Ring Soldering Iron is supplied with: 1 x Chisel Tip 6.4mm (WLTCH6IR60)1 x Conical Tip 0.8mm (WLTC08IR60)1 x Screwdriver Tip 2.4mm (WLTS24IR60)1 x Iron Stand1 x Solder Aid1 x Lead-Free Rosin Solder
Rustins Yacht varnish is specially formulated on Tung Oil to give maximum protection and durability to marine and other external woodwork. It has excellent adhesion and will not flake or peel when correctly applied. Ideal for exterior doors and window frames. Gloss or satin finish. Conforms to the Toys (Safety) Regulations 1995, BS:EN71 Part 3.Rustins Yacht Varnish Gloss.Size: 2.5 Litre.
Main Product Description:
Discover the FloPlast ABS Solvent Weld 135° Obtuse Bend - 32mm Grey, a robust and versatile plumbing solution crafted from durable ABS material. With a 135° obtuse angle bend, this fitting provides precise pipe alignment while maintaining a smooth transition. Its UV-stable finish ensures suitability for exterior waste pipe connections, making it suitable for both domestic and commercial installations. The solvent weld joint offers a hassle-free installation process without the need for tightening.
Features:
- Crafted from tough and durable ABS material
- Smooth 135° obtuse angle bend for precise pipe alignment
- Compatible with standard pipes due to its 32mm diameter
- Easy solvent-weld system for a strong bond
- UV-stable finish for outdoor applications
- Light grey finish to blend with typical plumbing fixtures
- Suitable for both domestic and commercial installations
Benefits:
- Enhanced durability and resistance to wear and tear
- Secure and leak-free connections for solvent weld waste pipes
- Versatility for various plumbing needs, including exterior connections
- Hassle-free installation process with no tightening required
The JRP Riveting Products 5.0 x 40mm Aluminium/Steel Dome Head Rivets are designed for strong and reliable metal joining. Ideal for various applications, these rivets ensure durability and ease of use.
High-Quality Aluminium and Steel Construction
Perfect for Metal Joining Applications
Easy to Install with Dome Head Design
Robust and Durable for Long-Lasting Use
Versatile for DIY and Professional Projects
Discover the durability and versatility of JRP Riveting Products 4.8 x 15mm Aluminium/Steel Dome Head Multigrip Rivets in Heritage Green. Ideal for various applications, these rivets provide a strong and reliable fastening solution.
High-Quality Aluminium and Steel Construction for Enhanced Strength
Multigrip Design Allows for Use in Different Material Thicknesses
Heritage Green Finish for Aesthetic Appeal
Easy to Install, Perfect for DIY and Professional Projects
Suitable for Use in Automotive, Construction, and Crafting Applications
Discover the strength and reliability of JRP Riveting Products with our 4.8 x 16mm Steel / Steel Large Flange Head Rivets. Designed for heavy-duty applications, these rivets ensure a secure and durable fastening solution.
High-Quality Steel Construction for Enhanced Durability
Large Flange Head Provides Superior Grip and Stability
Ideal for Various Heavy-Duty Applications
Easy to Install with Standard Tools
Perfect for DIY and Professional Use
Master Lock classic brass padlocks are a tough and reliable security solution. The solid brass body has a modern diamond shaped design and a brushed finish. The extensive range of brass padlock options means there is a Master Lock brass padlock for just about any need. Each padlock has a solid body, hardened steel shackle and dual locking levers. A variety of multi-pack options, where all padlocks in the pack open with the same key (keyed alike) is also available. Padlocks are available with 4-pin, 5-pin or 6-pin cylinders and with a variety of shackle lengths for added security and for a wider range of possible application options. All Master Lock padlocks are supplied with a minimum of 2 keys and a Lifetime Warranty against mechanical failure. Suggested Uses: Gates, containers, storage units and sheds.The Master Lock 140EURDLF has the following specifications: 40mm solid brass padlock - 38mm hardened steel shackle, 6mm diameter - 4-pins
Master Lock classic brass padlocks are a tough and reliable security solution. The solid brass body has a modern diamond shaped design and a brushed finish. The extensive range of brass padlock options means there is a Master Lock brass padlock for just about any need. Each padlock has a solid body, steel shackle and single locking lever. All Master Lock padlocks are supplied with a minimum of 2 keys and a Lifetime Warranty against mechanical failure. Suggested Uses: Gates, containers, storage units and sheds.The Master Lock 120EURD has the following specifications: 20mm solid brass padlock - 11mm steel shackle, 4mm diameter - 3-pins cylinder
The Master Lock Excell™ Laminated Steel Padlocks are made with cutting edge technology to deliver unprecedented security. They feature tough cut patented octagonal boron carbide shackles which are 50% tougher to cut than hardened steel, and dual ball bearing locking mechanisms for maximum pry resistance. The laminated steel padlocks are built for strength, with stainless steel and zinc outer components for exceptional weather resistance. They have either a precision 4-pin or 5-pin cylinder and recessed rivets that are chisel resistant. Supplied with 4 keys and a Lifetime Warranty against mechanical failure. Suggested uses: gates, sheds, storage units, fences, containers and chains.The Master Lock M1EURDLH has the following specifications: 45mm Excell™ laminated steel padlock - 51mm Octagonal boron carbide long shackle, 8mm diameter - 4-pin tumbler cylinder - dual ball bearing locking
The Master Lock Aluminium Black Vinyl Cover padlocks are a tough and dependable security solution. With a modern black vinyl finish to the body, they are an appealing solution for day-to-day reliability. Each padlock has a solid body, hardened steel shackle and dual locking levers. A variety of multi-pack options, where all padlocks in the pack open with the same key (keyed alike) are also available. Padlocks are available with 3-pin and 4-pin cylinders and with a variety of shackle lengths for added security and for a wider range of possible application options. The black vinyl cover also helps protect surfaces from scratching. All Master Lock padlocks are supplied with a minimum of 2 keys and a Lifetime Warranty against mechanical failure. Suggested uses: Lockers, trunks, cupboards and sheds.The Master Lock 9140EURDBLK has the following specifications: 40mm aluminum padlock with black vinyl cover - 21mm hardened steel shackle, 6mm diameter - 4-pins
The Master Lock Aluminium Black Vinyl Cover padlocks are a tough and dependable security solution. With a modern black vinyl finish to the body, they are an appealing solution for day-to-day reliability. Each padlock has a solid body, hardened steel shackle and dual locking levers. A variety of multi-pack options, where all padlocks in the pack open with the same key (keyed alike) are also available. Padlocks are available with 3-pin and 4-pin cylinders and with a variety of shackle lengths for added security and for a wider range of possible application options. The black vinyl cover also helps protect surfaces from scratching. All Master Lock padlocks are supplied with a minimum of 2 keys and a Lifetime Warranty against mechanical failure. Suggested uses: Lockers, trunks, cupboards and sheds.The Master Lock 9130EURDBLK has the following specifications: 30mm aluminium with black vinyl cover padlock - 18mm hardened steel shackle, 5mm diameter - 4-pins
The Master Lock S2394 Universal Mini Circuit Breaker Lockout Device locks virtually all miniature ISO/DIN pin-out circuit breakers throughout the world. The patented device features a thumb turn dial screw for easy attachment, no tools required. Device attaches to circuit breaker and makes dial inaccessible in the locked position to prevent removal. Padlock can be applied horizontally or vertically and design allows device to be mounted side-by-side on adjacent breakers. Device works with all American Lock® and Master Lock® safety padlocks and lockout hasps (does not include ALO80 or ALO802).
The Irwin HSS Pro Drill Bit manufactured from high quality HSS steel. They have precision ground cutting edges for fast drilling and perfect finishing, a ground flute for maximum accuracy and fast chip removal and a universal 118º point shape for drilling a wide selection of materials. Manufactured to DIN 338 standards.Irwin HSS Pro Drill Bit. Size 3.5 x 70mm.PVC Tube.
Discover the reliability of Unifix Grade 10.9 Socket Button Head Screws, designed to meet ISO 7380-1 standards. These screws are perfect for a variety of fastening applications, ensuring strength and durability.
High-Quality Grade 10.9 Steel for Enhanced Strength
Meets ISO 7380-1 Standards for Consistent Performance
Bright Zinc Plated (BZP) Finish for Corrosion Resistance
Socket Head Design for Easy Installation with Allen Key
Ideal for Use in Machinery and Structural Applications
Quantity: Box of 200
Master Lock Lashing Straps made from ultra resistant Monster Weave™ webbing with metal buckles. Convenient for a wide range of loads. They have a width of 25mm and colours may vary. TUV certified. Capacity: Lashing: 150kg, Max: 300kg.The MasterLock Lashing Straps with a metal buckle supplied in a pack of 2, ONE colour supplied. They have the following specification: Length: 2.5m.Width: 25mm.Capacity: Lashing: 150kg, Max: 300kg.Quantity: Pack of 2.
Discover the Unifix Grade 10.9 Socket Button Head Screws, designed for high-strength fastening in various applications. These screws meet ISO 7380-1 standards and are perfect for both DIY and professional use.
High-Strength Grade 10.9 Material for Durability
Socket Button Head Design for Easy Installation
Meets ISO 7380-1 Standards for Quality Assurance
Bright Zinc Plated (BZP) Finish for Corrosion Resistance
Ideal for Use in Machinery and Structural Applications
The Master Lock FPW082FTCML Next Generation Fire Safe is the first of its kind to leverage 'Master Lock Security, Built In' technology. Its advanced, multi-point protection system effectively resists physical attacks and lock manipulation. Ideal for protecting documents and irreplaceable valuables. It has a sleek, modern design; textured herringbone exterior, angled corners and an integrated metal handle offers secure yet simple access. Powered by Lithium batteries, these batteries are pre installed and provide extended battery life. Supplied with a Fire and Water Bolt-Down Kit. This ensures thieves cannot easily remove the safe, while maintaining fire and water protection. Fire Protection: 1-hour UL-certified fire resistance at 927 deg;C and 1-hour fire protection for digital media up to 927 deg;C. The FPW Safe also guarantees water protection in up to 12cm of water for up to 24 hours. Specifications: External Dimensions (H x D x L): 34.8 x 47.8 x 41.7cm.Internal Dimensions (H x D x L): 32 x 29.2 x 32cm.Capacity: 22 litres.
Steelcor™ bungee cords, with their reverse hook with steel core, are 3x stronger than traditional bungee hooks. They are manufactured from premium quality rubber cord for superior elasticity and strength. Reversed hooks make attachment easier and deliver significantly more resistance. Colour-coded size emblems allow quick and easy length identification. TUV certified. Diameter: 8mm. Resistance limit: 86kg.Length: 80cm.
Discover the strength and reliability of Unifix Grade 10.9 Socket Countersunk Head Screws. Designed to meet DIN 7991 standards, these screws are perfect for heavy-duty applications.
High-Strength Grade 10.9 Steel for Durability
Socket Countersunk Head Design for Easy Installation
Bright Zinc Plated Finish for Corrosion Resistance
Dimensions: M12 x 60 for Versatile Use
Ideal for Structural and Mechanical Applications
Discover the reliability of Unifix Grade 10.9 Socket Button Head Screws, designed to meet ISO 7380-1 standards. These screws are perfect for a variety of applications, providing strength and durability.
High-Quality Grade 10.9 Steel for Enhanced Strength
ISO 7380-1 Compliance Ensures Reliable Performance
Bright Zinc Plated Finish for Corrosion Resistance
Socket Head Design Allows for Easy Installation
Ideal for Use in Machinery and Structural Applications
Quantity: Box of 200
The Masterlock Zenex™ Lockout non-conductive padlocks have dielectric protection and are non-sparking, with either a composite nylon, hardened steel or stainless steel shackle. They are the optimal safety padlock, designed exclusively for a Lockout/Tagout system. They are durable, standardised, substantial and identifiable for OSHA 1910.147 compliance. The lockout padlock has a Zenex™, UV stable composite body and 6mm diameter composite nylon or 4.76mm stainless steel shackle, it is corrosion and chemical resistant and can withstand temperatures ranging from -57 ° C to +177 ° C. The body sides and faces can be laser-engraved for permanent identification. Includes 'Danger' and 'Property of' padlock labels. Key retaining, supplied with a single key.Stainless steel shackle
The Master Lock Lockout Gate Valve Cover has Zenex™ composite body, which withstands chemicals and extreme temperatures ranging from -57 ° C to +177 ° C. The cover completely surrounds the valve handle to prevent accidental operation. The unique patented rotating design allows for easier installation in confined spaces and insulated pipes. The Centre knockout can be removed for rising stem gate valves. Device can be locked with up to 2 padlocks. 'Danger DO NOT OPERATE' label supplied.Can lock valve sizes 50-125mm (2-5 in).
HG Stain Away No.4 removes stains caused by sauce, gravy, herbs, blood, milk and egg whites, but also chocolate, mayonnaise, whipping cream and exudate.
Main Product Description:
Introducing the FloPlast 68mm Round 112' Offset Bend White, a high-quality downpipe solution designed for efficient water management. This product is ideal for round gutter systems and offers durability and reliability due to its PVC-U construction, which resists ignition and supports no combustion. The pre-lubricated seal ensures smooth installation, while the offset design allows for seamless connections between pipes. Order yours today for reliable performance and peace of mind.
Features:
- PVC-U material for non-combustibility and resistance to fire
- Pre-lubricated seal for easy installation
- Smooth offset design for secure connections
- Suitable for use with round gutters
Benefits:
- Enhanced safety through reduced risk of fire
- Easy installation process thanks to pre-lubricated seal
- Seamless connections ensure optimal water flow
- Compatible with various round gutter systems
