These Faithfull vitrified grinding wheels are suitable for use on most types of bench grinders. For tungsten carbide and non ferrous metals. Supplied with bore reducing bushes and will fit bench grinders with the following shaft sizes: 31.75mm 19.05mm 15.88mm 12.77mm
The Faithfull Straight Grease Nipples are case hardened and zinc plated for corrosion resistance.They conform to DIN 71412 and are available in common threads. Supplied in packs of 5.Thread: M8 x 1.0
The Faithfull Straight Grease Nipples are case hardened and zinc plated for corrosion resistance.They conform to DIN 71412 and are available in common threads. Supplied in packs of 5.Thread: 5/16in BSF
The Faithfull heavy-duty side lever grease gun develops up to 10,000 psi - 690 bar of pressure. The gun features an aluminium diecast head with an easy locking plunger system and ergonomic pump handle grip. The positive grip plunger handle, and the bulk loader system with an air release valve, combine to make this grease gun very efficient and easy to use. A variable lever stroke feature is built-in for use in confined areas and the four jaw hydraulic coupler ensures that the grease goes exactly where it is needed at the press of the lever. With a 500g (16oz) capacity, the gun can be bulk filled by its suction action but will also accept 400g grease cartridges.
Standard hydraulic coupler to suit most greasing application, fitted with a spring loaded ball check mechanism to prevent pressure loss and four fully hardened spring steel jaws for a long service life. This product is for use with hand operated grease guns only with a working pressure of up to 6,000psi / 413 bar.Fits Faithfull grease guns FAI GGHD and FAI GGMP and flexible hoses FAI GGHOSE12 and FAI GGHOSE18.Suitable for use hand operated grease guns with a 1/8in BSPT thread and working pressure not exceeding 6,000psi / 413 bar.
The Faithfull FAIGDSET4 is for drilling glass windows, mirrors, bottles and ceramics - for use in variable speed drills only. These drillbits have extremely hard tungsten carbide spear tips and should be used at low speeds whilst applying light pressure only. Note: Lubricate with water for best results The Faithfull FAIGDSET4 is a set of 4 glass drills in a plastic case and comes in the following sizes: 3, 4, 5 and 6mm.
These Faithfull Tile & Glass Drill Bits have extremely hard tungsten carbide spear tips and should be used at low speeds whilst applying light pressure only. They are ideal for drilling glass windows, mirrors, bottles and ceramics. Lubricate with water for best results. For use in variable speed drills only.The FAIGD7 Tile & Glass Drillbit has the following specifications: Size: 7mm. Length: 60mm.
These Faithfull Tile & Glass Drill Bits have extremely hard tungsten carbide spear tips and should be used at low speeds whilst applying light pressure only. They are ideal for drilling glass windows, mirrors, bottles and ceramics. Lubricate with water for best results. For use in variable speed drills only.Diameter 5 mm Length 60 mm
These Faithfull Tile & Glass Drill Bits have extremely hard tungsten carbide spear tips and should be used at low speeds whilst applying light pressure only. They are ideal for drilling glass windows, mirrors, bottles and ceramics. Lubricate with water for best results. For use in variable speed drills only.Diameter 4 mm Length 60 mm
These Faithfull Tile & Glass Drill Bits have extremely hard tungsten carbide spear tips and should be used at low speeds whilst applying light pressure only. They are ideal for drilling glass windows, mirrors, bottles and ceramics. Lubricate with water for best results. For use in variable speed drills only.Diameter 3 mm Length 60 mm
These Faithfull Tile & Glass Drill Bits have extremely hard tungsten carbide spear tips and should be used at low speeds whilst applying light pressure only. They are ideal for drilling glass windows, mirrors, bottles and ceramics. Lubricate with water for best results. For use in variable speed drills only.Diameter 10mmLength 90mm
This Faithful Round Second Cut Engineers File is ideal for filing circular openings or concave surfaces and slightly tapered towards the point, with a double cut finish. For professional and frequent DIY use, fitted with a comfortable handle. Second Cut: Approx 36 teeth per 25mm (Medium).The FAIFIRSC8 Engineers' File has the following specifications: Cut: Round Second. Blade Length: 200mm (8 in). Blade Width: 8mm (5/16 in).
This Faithful Round Second Cut Engineers File is ideal for filing circular openings or concave surfaces and slightly tapered towards the point, with a double cut finish. For professional and frequent DIY use, fitted with a comfortable handle. Second Cut: Approx 36 teeth per 25mm (Medium).Cut round second Blade Length: 250mm (10in)Blade Width: 9mm (5/16in)
These Faithfull Engineer's Hand files fitted with a comfortable handle, for professional and frequent DIY use. They are parallel in width, slightly tapered in thickness and have a double cut with safe edge. Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Type: HandCut: Second CutBlade Length: 200mm (8in)Blade Width: 20mm (3/4in)
These Faithfull Engineer's Hand files fitted with a comfortable handle, for professional and frequent DIY use. They are parallel in width, slightly tapered in thickness and have a double cut with safe edge. Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).The FAIFIHSC12 hand file has the following specifications:Cut: Second Cut. Blade Length: 300mm (12in). Blade Width: 25mm (1in).
This Faithfull Half-Round Second Cut Engineers File is a very useful file combining the features of both round and flat files, one side being rounded and the other flat. It can be used on flat, concave and convex surfaces. It is tapered towards the point in width and thickness. It is double cut with a safe edge. It is fitted with a comfortable handle. Ideal for professional and frequent DIY use.The FAIFIHRSC12 half round engineers file has the following specifications:Length: 300mm (12in). Blade Width: 29mm (1.1/8in).
This Faithfull Half-Round Second Cut Engineers File is a very useful file combining the features of both round and flat files, one side being rounded and the other flat. It can be used on flat, concave and convex surfaces. It is tapered towards the point in width and thickness. It is double cut with a safe edge. It is fitted with a comfortable handle. Ideal for professional and frequent DIY use.The FAIFIHRSC10 half round engineers file has the following specifications:Blade Length: 250mm (10in). Blade Width: 24mm (7/8in).
These Faithfull Engineer's Hand files fitted with a comfortable handle, for professional and frequent DIY use. They are parallel in width, slightly tapered in thickness and have a double cut with safe edge. Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).The FAIFIHB12 hand file has the following specifications:Cut: Bastard. Blade Length: 300mm (12in). Blade Width: 27mm (1.1/16in).
Faithfull Chainsaw Files are ideal for sharpening round hooked chainsaw teeth. They are perfect for professional and frequent DIY use and fitted with a comfortable handle. Supplied in a blister pack.FAIFIC732 Chainsaw File has the following specifications:Cut: Single Cut. Blade Length: 200mm (8in). Blade Width: 5.5mm (7/32in).
Faithfull general purpose sledge hammer for builders and contractors.Both striking faces are precision ground, specially hardened and heat treated to withstand the highest impact applications. Virtually unbreakable fibreglass shaft with a soft-grip, non-slip handle and overstrike protection. Manufactured in accordance with BS876.Weight: 6350g (14lb)
Faithfull Flat bits are designed to perform fast, clean cuts, will bore all types of timber and are equally efficient when drilling with or against the grain. All bits have a precision ground point and cutting surfaces with extended spurs for faster cutting. All sizes except the 6mm have a non-slip hexagonal shank with a locking mechanism compatible with adaptors or chucks with a built-in quick-release feature. A 300mm extension shank is available for use with flat bits of 16mm and above, for deep drill applications. Ideal for use with both mains or cordless drills Made to DIN 3126 quality with 1/4in hexagonal non-slip shaft.Diameter: 10 mm Overall Length: 152 mm
Faithfull Replacement Diamond Wetstone for FAIDWKIT (Diamond Stone, Docking Station and storage wallet). The double sided 8mm thick 70mm x 200mm metal stone is electroplated with monocrystalline diamond in two grits, 400G Coarse and 1000G Fine. Will sharpen carbon steel, HSS and tungsten carbide tools and may also be used to abrade glass, ceramic tiles and porcelain. Ideal for general purpose sharpening of knives, scissors, chisels, plane blades, cutting blades, TCT router bits and any tool that requires a sharp edge. Can be used dry or with water as a lubricant, no oils are necessary.
Square Leg Compasses, when fitted with a standard pencil or other marking implement, can be used for drawing circles and arcs or used as dividers to measure distances or repeat a set distance. Manufactured from forged steel with square section legs for grip and balance, this Faithfull divider has a hardened and ground compass point and knurled grip locking screws. Size: 200mm (8in).
