The Faithfull professional grade aluminium plasterers hawk with a cast aluminium strengthening back plate, foam rubber callous protector and a soft grip handle for user comfort. Size: 12in/300mm Square.
To avoid workshop dust and unwanted oil deposits, this crafted beech oilstone box is designed to store any standard 200 x 50 x 25mm (8 x 2 x 1in) oilstone. Internal corners can be cut to suit other sizes.Internal size: 205x50x25mm.
The Faithfull Heavy-Duty Piston Siphon Pump is designed to safely dispense liquids from containers ranging from 5L up to 205L drums. It is made from a non-corrosive PE material. Recommended for use with: kerosene, diesel, gasoline, water (not safe to drink), light oils, chemical insecticides, soaps, detergents, mild acids, antifreeze and liquid waxes. Specification: Total Length: 1150mmSuction Tube Length: 850mmDischarge Tube Length: 1200mm approx. Delivery Volume: 20LPM approx.
The Faithfull Oil Suction Gun is designed for the easy removal and replacement of oil from sumps, gearboxes and axles on all types of machinery and vehicles. Black finish body with anti-slip bands. Steel body fitted with a 300mm flexible extractor tube to enable easy access to awkward locations. The suction gun is suitable for use with engine, differential and transmission oils. Complete with 300mm flexible extractor tube. Ideal for vehicle and machinery use. Capacity 500 ml (16 fl.oz).
The Faithfull Nutspinners have a machined hexagonal socket and shaft with a corrosion resistant finish. Fitted with full size soft grip, non-slip handles for user comfort.Size: 9mm.
Faithfull Nail punch with a square head which provides a larger striking area and stops the punch rolling off the bench. Accurately hardened and tempered with a precision formed concave tip for better nail contact. Designed to drive nail heads below the surface of the wood.Point Diameter: 4.0mm (5/32in)Length: 100mm (4in)
Faithfull Nail punch with a square head which provides a larger striking area and stops the punch rolling off the bench. Accurately hardened and tempered with a precision formed concave tip for better nail contact. Designed to drive nail heads below the surface of the wood.Point Diameter: 5mm (3/16in)Length: 100mm (4in)
Faithfull Nail punch with a square head which provides a larger striking area and stops the punch rolling off the bench. Accurately hardened and tempered with a precision formed concave tip for better nail contact. Designed to drive nail heads below the surface of the wood.Point Diameter: 3mm (1/8in)Length: 100mm (4in)
Faithfull Nail punch with a square head which provides a larger striking area and stops the punch rolling off the bench. Accurately hardened and tempered with a precision formed concave tip for better nail contact. Designed to drive nail heads below the surface of the wood.Point Diameter: 1.5mm (1/16in)Length: 100mm (4in)
Replacement screw in Nylon face for use with Faithfull soft face hammers. Widely used in assembly applications including engineering, furniture making, shop fitting, partitioning, double glazing and injection moulding operations.1 x Faithfull Nylon Hammer Replacement Face 38mm
Replacement screw in Nylon face for use with Faithfull soft face hammers. Widely used in assembly applications including engineering, furniture making, shop fitting, partitioning, double glazing and injection moulding operations.1 x Faithfull Nylon Hammer Replacement Face 32mm
Faithfull Letter and number punches are used for hand marking metals and other hard materials. They are useful for stamping personal identification or post codes on tools, cycles etc., as frequently recommended by police and insurers. The letter or number sizes as shown, relate to the height of the characters. The punches are manufactured from high quality tested carbon steel with double induction hardened heads to ensure high quality impressions. The body is hardened and the head is tempered to prevent chipping when hammered.Contents : 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 (9 is achieved by reversing 6).Set supplied in plastic box.Size : 5mm (3/16 in).
Faithfull Letter and number punches are used for hand marking metals and other hard materials. They are useful for stamping personal identification or post codes on tools, cycles etc., as frequently recommended by police and insurers. The letter or number sizes as shown, relate to the height of the characters. The punches are manufactured from high quality tested carbon steel with double induction hardened heads to ensure high quality impressions. The body is hardened and the head is tempered to prevent chipping when hammered.Contents : 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 (9 is achieved by reversing 6).Set supplied in plastic box.Size : 12mm (1/2 in).
Made from virtually unbreakable and shatterproof ABS. The handle, pocket clip and blade are insulated for maximum safety. Made to VDE specification 0680- Part 6 - 4.77 To test the circuit place the screwdriver end on the electric contact and press your thumb against the metal contact next to the neon viewing window, if the contact is live the bulb will light. IMPORTANT:-Check that the neon bulb is in order by using the tester first on a known live circuit.Never touch the uninsulated part of the blade when testing.Size: Blade length 57mm (2.1/4 in)
The Faithfull Multi-Tester is more than just a conventional voltage tester. The built-in battery powered sensor allows the multi-tester to perform a number of different functions without the need to dismantle a suspected faulty item or have any contact with live parts. The multi-tester is fully insulated and is supplied complete with full operating instructions and will perform the following tests: continuity, bulbs, fuses, short circuits, cable tracking, mains sockets and microwave oven leakage. SAFETY NOTEAlways read and the instruction supplied with the multi-tester.Never use a multi-tester until you are fully conversant with its use and applications. Never work on live equipment, and if in any doubt, always contact a qualified electrician.
Made from virtually unbreakable and shatterproof ABS. The handle, pocket clip and blade are insulated for maximum safety. Made to VDE specification 0680- Part 6 - 4.77 To test the circuit place the screwdriver end on the electric contact and press your thumb against the metal contact next to the neon viewing window, if the contact is live the bulb will light. IMPORTANT:-Check that the neon bulb is in order by using the tester first on a known live circuit.Never touch the uninsulated part of the blade when testing.Size: Blade length 127mm (5in)
Faithfull Professional high speed steel (HSS) drill bits are manufactured from high quality M2 grade tool steel, to meet the requirements of the DIN 338 standard. Each bit has a fully ground flute and cutting tip, featuring a 135 degree point angle and split point providing easy non-slip starting and precision drilling. All these great features help you to achieve superior performance in most materials. Suitable for use in: Alloy Steels, Carbon Steels, Cast Iron, Hardened Alloy Steels, Stainless Steels. Supplied in heavy gauge metal storage case. Display packed.No. of drills: 19 Sizes: 1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, and 10mm
The Faithfull Mixing Paddles fitted with M14 spindle threads. Designed for use with professional mixing machines of 850 watts or more. Great for mixing adhesives, Artex, screed, mortar, plaster, paste, paint and over heavy mixture materials.MP115M14 M14 Mixing Paddles. Size: 115 x 600mm.
The Faithfull 175mm (7in) Marking Knife. A heavy-duty scoring knife featuring a hardwood handle and brass ferrule. The diamond shaped blade is bevelled on one side only, allowing the flat side close contact with a straight edge or cutting guide when laying out particularly across the grain of the wood.
These Faithfull heavy-duty manhole keys are designed to lift and remove most standard non-locking manhole covers, drain gully covers and access panels. The robust keys are zinc plated for rust protection and have rectangular T shaped key ends and large triangular shaped handles that provide a positive grip and allow easy access for gloved hands. Supplied in pairs.2 x Faithfull Manhole Keys Manhole Keys 320mm (12.5in)
These Faithfull heavy-duty manhole keys are designed to lift and remove most standard non-locking manhole covers, drain gully covers and access panels. The robust keys are zinc plated for rust protection and have rectangular T shaped key ends and large triangular shaped handles that provide a positive grip and allow easy access for gloved hands. Supplied in pairs.2 x Faithfull Manhole Keys Manhole Keys 170mm (6.6in)
The HSS wavy set teeth on this Faithfull bi-metal blade make it ideal for sawing wood, copper and aluminium pipes, sheet metal, plastics and profiles. Ideal for cutting veneered and laminated boards as well as parquet in flooring and partition wall applications. Compatible with many multi-function oscillating power tools.
This Faithfull Saw Blade has a broad range of applications with side set, hardened teeth, for fine straight cutting in soft wood, plastics, plasterboard, plastic pipes and similar materials. Compatible with many multi-function oscillating power tools.Multi-Functional Tool Flush Wood Blade Side Set Pack of 5 Width: 34mm.
