These KNIPEX 13 Series VDE Multifunctional Installation Pliers are fitted with multi-component grips, VDE tested up to 10,000V and safe for work up to 1,000V. They conform to DIN EN / IEC 60900. The head is made from forged, vanadium electric steel, multi stage oil-hardened. Chrome plated finish. The slim dimensions of these pliers enable easy access. Fitted with a bolted joint for precise, zero backlash operation of pliers. With 6 functions: -Smooth surfaces near the tips grip single cores without damaging them; serrated gripping surfaces and pipe grip for gripping flat and round material. -Clear-cut outside edge on the jaw for working on flush-mounted junction boxes and deburring feed-through holes. -Stripping holes for conductors of 0.75 - 1.5mm² and 2.5mm² -Crimp die for wire-end ferrules 0.5 - 2.5mm² -Cable shears with (induction-hardened) precision cutting edges for copper and aluminium cables up to 5 x 2.5mm² / dia. 15mm -Gripping, without opening the pliers completely (intelligent latching mechanism in the spring assisted version). The cutting edge remains closed and protectedThese Knipex VDE Multifunctional Installation Pliers have an opening spring integrated in to the joint. The activated locking lever keeps the cutting edges closed while other functions remain active. The intelligent latching mechanism enables you to 'grip' without opening the pliers. The cutting edge remains closed and protected.
International insulated Phillips screwdrivers with an injection moulded nylon 11 handle, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to +70°C, making it unique in this category. ITL insulated tools are the toughest in the market, being virtually indestructible. ITL also offers the best guarantee in the market - a lifetime warranty on the tool and insulation, plus a 30 day no quibble money back guarantee.International Insulated Screwdriver. Size: Phillips No.0 x 75mm (3in).
The ITL Insulated Pozidrive Screwdrivers with injection moulded nylon 11, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to +70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on the tool and insulation, plus a 30 day no quibble money back guarantee.International Insulated Screwdriver. Size: Pozi No.0 x 75mm (3in).
The ITL Insulated General Purpose Open End Spanners are made from injection moulded nylon 11 which exceeds the requirements of IEC 60900, the industry standard for live line working. Only the handle is insulated to allow access into tight spaces. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to +70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on the tool and insulation, plus a 30 day no quibble money back guarantee.International Insulated General Purpose Spanner. Size: 3/8in AF.
The ITL Insulated End Wire Strippers with injection moulded nylon 11 handles, which exceed the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to +70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on the tool and insulation, plus a 30 day no quibble money back guarantee. Size: 150mm (6in).
Irwin I-75 Hacksaw 300mm is aimed at meeting the demands of professional users. Mushroom pins prevent the blade from being released when the saw is dropped. The ergonomically shaped handle ensures a comfortable grip and the 90° and 180° blade setting options are a handy facility. The I-75 has a maximum 75kg tension making cutting easier. Blade Length: 300mm (12in).
The Irwin Speedhammer Plus Chisels are for use with SDS Plus machines. Can be used on concrete and masonry and have a grey sandblasted professional finish. They are suitable for a wide range of applications: breaking through, breaking up concrete, light demolition work and chasing of channels for pipes and electrical conduit.1 x Irwin Speedhammer Plus Spade Chisel 40mm Length 250mm
The Irwin Speedhammer Max drill bits have been designed for easy and trouble free drilling of concrete, granite and similar very hard materials. The patented carbide tip head takes 80% of the workload, ensuring higher durability, speed and rebar performance. The 53° drilling head design means more aggressive cutting and faster dust removal for overall faster performance and the four-cutter tips for less vibration,faster drilling, rounder holes and better anchoring. The shank fits all SDS-max rotary hammers.The Irwin IRW10502107 Speedhammer Max Drill Bit has the following dimensions:Diameter: 22.0mm.Total length: 520mm.Working length: 400mm.Number of cutting edges: 4.
The Irwin masonry drills bits are designed for fast and efficient drilling in brickwork, concrete and breeze block, especially with cordless drills. They drill up to 60% faster than competitive drill bits whilst maintaining the same high durability. The single flute design ensures faster dust removal for increased drilling speed, with the unique, pressed diamond-ground carbide tip allows for aggressive cutting and the carbide tip design also ensures 20% longer life compared to previous Irwin masonry drill bits. The bits are made with a chrome vanadium body with high carbon content which allows more hardening and a stronger bit for maximum rupture strength.Irwin Masonry Drill Bit for Cordless Drills.Specifications:Diameter: 8.0mm.Total length: 400mm.Working Length:300mm.
Used for imparting uniform finish on precision machined parts, in tool and die manufactures and chamfering/deburring/radiusing.Round.Type. MF244.Size. 100 x 12mm (4 X 1/2 in).Grade. Medium.
The Hultafors HULSMV20 Bevel square with stainless steel blade and aluminium stock has milled working surfaces for the copying and transfer of angles to work pieces. The square has a screw for locking blade at end of stock for improved accessibility and is 200mm in length.
Hammerite Radiator Paint is specially formulated to provide a heat resistant brilliant white finish on water-filled household radiators and hot water pipes. Provides a tough long lasting finish. Easy to use, this paint resists yellowing and prevents the formation of rust. It is low odour and touch dry in 4-6 hours. Supplied in a 500ml tin.HMMRES500 Radiator Paint has the following specifications:Finish: Satin.Pack type: Tin.Size: 500ml.
The HiKOKI G12STX Angle Grinder has a powerful motor with excellent overload durability and a top mounted on/off switch. With a no voltage restart protection feature that prevents the tool from restarting after the power has been temporarily cut off during operation. Ideal for a multitude of applications including removal of castings and finishing of various types of steel, bronze and aluminium materials etc. Supplied with: 1 x 115mm Diamond Blade, 1 x Side Handle, 1 x Wrench, 1 x Carry Case. Specification: Input Power: 600WNo Load Speed: 11,500/min.Disc Size: 115mmSpindle: M14Overall Length: 254mmWeight: 1.8kg1 x HiKOKI G12STX/J7 Angle Grinder 115mm 240V version.
Gorilla Super Glue Gel has a non-run control gel formula, allowing controlled application and making it ideal for use on vertical surfaces. The glue bonds in 10 seconds and is impact-tough. Size: 2x 3g
Garryson Garryflex™ Abrasive Blocks are made from resilient rubber which is filled evenly throughout with hard abrasive grit. They are ideal for cleaning and polishing all metals and ceramics. Use instead of emery cloth, wet and dry, wire wool etc.This Garryson Garryflex™ Abrasive Block has the following specification: Grade: Extra Coarse 36 Grit.Colour: Wine.
The Faithfull Power Plus SMD LED Task Light has a highly efficient 20 Watt SMD (Surface Mounted Diode) LED that provides an extremely bright, glare free 2,000 Lumen's of light output and is mounted in a heavy-duty, impact resistant case rated to *IP44/54.A mirror backed reflector improves the light output and beam spread of the work light, which also has the added benefits of an integrated power take-off socket, allowing the series linking of lamps or for use with power tools*. The lamp has a 3m x 0.75mm² cable and a built-in storage system and is fitted with an approved 240 or 110 volt plug.LED work lights have many uses around the work site or home, providing a glare free bright light that avoids the high heat output associated with halogen bulbs. These lights are cool running and eliminate the fire and burn hazards associated with halogen lighting, which make them ideal for tradesmen who are working close by. They also have the benefit of not drying out plaster or similar finishes too quickly (which can happen with the heat emitted from halogen lights) which can result in cracking.*110 Volt Version is IP54 Rated, Light Maximum Load: 6.25amp Current (Max 1000W), Maximum Link: 15 Lights. Total Socket Load MUST NOT Exceed 1,000 Watt.*240 Volt Version is IP44 Rated, Light Maximum Load: 6.25amp Current (Max 2200W), Maximum Link: 20 Lights. Total Socket Load MUST NOT Exceed 2,200 Watt.Faithfull Power Plus SMD LED Task Light with Power Take-Off 240 Volt Version. The 240 Volt Version is IP44 Rated, Light Maximum Load: 6.25amp Current (Max 2200W), Maximum Link: 20 Lights. Total Socket Load MUST NOT Exceed 2,200 Watt.
The Faithfull Replacement Battery For FPPSLLED30TB, used to provide extended run time, using an additional battery allows the battery packs to be cycled as they become exhausted and is particularly useful when no other power supply is available. The battery can be independently charged using either the mains or car charger that is supplied with the lamp (FPPSLED30TB) and can also be recharged in the lamp when it is in use with an external power source.
The Faithfull FPPRCD RCD Safety Adaptor Plug simply plugs into the mains, then you plug your electrical appliance into it. If there is a fault or a short in the tool you are using, the unit cuts the power very quickly, reducing the risk of electrocution The Faithfull FPPRCD Safety RCD Adaptor continuously monitors the power supply to an electrical appliance and cuts off the power within 40 milliseconds if an earth current fault is detected. This is fast enough to prevent a fatal electric shock. The Faithfull RCD Safety Adaptor Plug is an ideal way to protect yourself when using portable electrical tools, like lawnmowers, hedge trimmers and mains powered drills. Electrical appliances can become dangerous if the wiring becomes loose, or their power cords become damaged or if they get wet. Not only power tools and lawnmowers can cause electrocution is also possible if fingers, wet hair or other conductive bodies enter the appliance. In all these cases the Faithfull Safety RCD is a must. Not for use on ponds as when disconnected the protection will be lost. Safety RCD (Circuit Breaker)Can be used with any 240v appliance.Particularly recommended for use with power tools.
Forgefix TechFast Composite Panels to Steel Hex Screws are used to join composite panels to steel frame buildings. They have a specially designed compression control thread to prevent damage and denting of panels. They are fire and corrosion resistant, protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours. Complies with EU Safety, Health and Environmental requirements. They are supplied with 16mm EPDM rubber washers.These Forgefix TechFast Composite Panels to Steel Hex Screws have the following specification: Size: 5.5 x 80mmInsulation Thickness: 63-129mmPack Size: 100Drill Tip: No.3 No.3 drill tip for self-drilling in heavy gauge steel up to 5mm.
Forgefix TechFast Composite Panels to Steel Hex Screws are used to join composite panels to steel frame buildings. They have a specially designed compression control thread to prevent damage and denting of panels. They are fire and corrosion resistant, protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours. Complies with EU Safety, Health and Environmental requirements. They are supplied with 16mm EPDM rubber washers.These Forgefix TechFast Composite Panels to Steel Hex Screws have the following specification: Size: 5.5 x 105mmInsulation Thickness: 32-70mmPack Size: 100Drill Tip: No.5 No.5 drill tip for self-drilling in heavy gauge steel up to 12.5mm.
Forgefix TechFast Composite Panels to Steel Hex Screws are used to join composite panels to steel frame buildings. They have a specially designed compression control thread to prevent damage and denting of panels. They are fire and corrosion resistant, protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours. Complies with EU Safety, Health and Environmental requirements. They are supplied with 19mm EPDM rubber washers.These Forgefix TechFast Composite Panels to Steel Hex Screws have the following specification: Size: 5.5 x 85mmInsulation Thickness: 43-64mmPack Size: 100Drill Tip: No.3 No.3 drill tip for self-drilling in heavy gauge steel up to 5mm.
