Bahco Cantilever toolsteel tool box with an orange hammertone baked enamel finish. By pulling the handle the box opens up easily and gives immediate access to all the tool compartments. The handle can be folded for compact storage. Size: 530 x 200 x 200mm.
Support clip to prevent pipe from kinking or twisting. John Guest flow bend clip is designed to support tubes and eliminate pipe kinks. Made from durable plastic, the clip holds cold formed pipe bends and keeps pipework neat and tidy, lowering the risk of damage or accidental disconnection.
Pack of 10
The McAlpine WC-CON6 is a rigid WC connector that is designed to connect a toilet bowl to a 110mm soil pipe with a plain end outlet. The connector has an adjustable length of 97-107mm, making it suitable for a variety of toilet bowl sizes.
The connector also has a 10mm offset, which means it can be installed at a slight angle to help with the installation of the toilet. This can be particularly useful if the soil pipe is not in the ideal location for the toilet installation.
The McAlpine WC-CON6 is made from high-quality materials, ensuring that it is durable and long-lasting. It is also easy to install and can be used with a variety of toilet bowls and soil pipes.
Overall, the McAlpine WC-CON6 is a reliable and versatile WC connector that is well-suited for a range of toilet installations.
・ Available with finned outlets for 3½"/90mm and 4"/110mm PVC-U and cast iron soil pipe diameters (internal)
・ 97-107mm Inlet suits all pan spigots
・ Adjustable Length
・ Complies with BS 5627:1984 and DIN 1389-2
・ Manufactured in Polypropylene
The Fiskars Solid™ Metal Pointed Spade offers affordable quality for every garden. Its boron steel head with stepping board adds extra strength and makes driving into tough soil easier. The sharp, pointed blade edge is ideal for general digging tasks in hard, stony soil or cutting through turf or roots. Its steel head is welded to a strong metal shaft for added durability. A D-shaped handle fits all hand sizes, with or without gloves. Specification: Length: 116.6cm.
The McAlpine TSG2SS-SL-SC 75mm Water Seal Trapped Gully is a plumbing fixture designed for use in drainage systems. It features a clamp ring and cover plate for secure installation, and a 110mm or 2" vertical solvent spigot outlet for connection to other plumbing components.
The water seal trapped gully is an essential part of a drainage system as it helps prevent foul odours and gases from entering the building by trapping water in the gully. The trapped water creates a seal that stops gases from flowing back into the property. The trapped gully is usually installed in the floor to collect wastewater and prevent blockages in the drain system.
The McAlpine TSG2SS-SL-SC 75mm Water Seal Trapped Gully is made of stainless steel, which provides excellent corrosion resistance and durability. The clamp ring and cover plate ensure a secure fit, and the 110mm or 2" vertical solvent spigot outlet allows for easy connection to other plumbing components.
Overall, the McAlpine TSG2SS-SL-SC 75mm Water Seal Trapped Gully is a reliable and effective solution for drainage systems, particularly in commercial or industrial applications where durability and reliability are critical.
・ Available with White Plastic, Polished Stainless Steel or Chrome Plated Brass Cover Plates
・ 75mm Water Seal
・ 110mm Vertical Outlet
・ Supplied with110mm x 2" BS EN 1329-1:2000 solvent spigot outlet
・ Sheet floor gully suitable for concrete and suspended timber floors
Enhance your interior with the sleek and efficient V-Tac Lumi Vt-Dl0508 5W/8W Led Fire Rated Downlight Cct 4In1 Dimmable. Perfect for kitchens, bathrooms, and living areas, this LED downlight combines style with exceptional brightness.
Quickly and safely isolates a fixture or appliance via an integrated 1/4 turn isolation valveJohn Guest push-fit polypropylene Speedfit to Speedfit push-fit shut off valve isolates supply to a fixture or appliance. Fast and simple to install, John Guest valves create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. John Guest push-fit valves are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance.Manufactured in polypropylene with an EDPM O-Ring, the valve offers greater chemical resistance than the push-fit acetal valve and is suitable for potable water (10 bar at 20°C), intermittent hot water (4 bar at 60°C), water treatment and purification applications. All John Guest fittings are manufactured and assembled in the UK.
Features and benefits
Durable polypropylene shut off valve with EDPM O-Ring offers high chemical resistance
Integral 1/4 turn isolation valve
Instant push-fit connection and leak tight seal
Connect, disconnect and reconnect in seconds without tools
No scale build up improves performance and equipment lifespan
Superior flow characteristics
Suitable for potable liquid, intermittent hot water, water treatment and purification applications. Not suitable for compressed air, vacuum, explosive gases, petroleum spirit or other fuel or heating systems.
Compatible with LLDPE or soft metal pipe/tubing
The Dormer P801 Solid Carbide Rotary Burrs have cylinders without endcuts and produce double cuts. The first choice for general machining, improves ease of control, increased metal removal rate and breaks swarf into manageable pieces. They have toughened and hardened steel shanks that provide rigidity and strength. This prevents bending and reducing vibrations for an improved tool life. Ground to h6 (Carbide) and h7 (Steel). Excellent impact strength that is able to withstand high forces and to withstand higher temperature without failing. Special brazing elements provide excellent braze strength.The Dormer Solid Carbide Rotary Burr - Cylinder Without Endcut has the following specification: Diameter: 3mm.Shank Diameter: 3mm.Working Length: 14mm.Overall Length: 38mm.
The Bailey's Universal drain, chimney and flue cleaning brush has a plastic stock and polypropylene bristles. For brick chimneys and coal burning applications, and drain cleaning purposes.1 x Bailey Z5683 Universal Brush 150mm (6in)
JG Underfloor 240v Actuator Valve opens or closes the flow of water to an individual underfloor heating (UFH) circuit on the manifold and is controlled by a thermostat or programmer.
It also allows for independent pipe loop control via the thermostat when wired to a JG Aura wiring centre.
240v circuit actuator valve
Suitable for underfloor heating applications only
The Red Gorilla Complete Gorilla Broom® has been designed with unique features to make your job easier. Fitted with an integrated scraper blade, makes removing ‘stuck bits’ even easier. The anti-clog channel cuts down flying dust for a clean sweeping action. The extra wide head means you can shift more with minimal effort. Ideal for use in wet environments, as the non-porous polymer head and bristles won't absorb any fluid. Excellent to use on various floor types: rubber, hard and decking. Made from UV and frost-resistant materials, meaning it can be kept outside all year without fading or cracking.1 x Red Gorilla Complete Gorilla Broom® Blue 30cm
The Unibond Optimum Moisture Absorbing System helps prevent condensation, damp and bad smells, as well as the development of mould and dust mites, which could cause allergies. Ideal for every room inside the home and caravans/boats. No noise and no electricity.Suitable for large rooms up to 20m².Aero 360 Moisture Absorber Refills last for approximately 3 months in a 20m² room. 2 x 450g Refill Tabs.
The PlastiKote Twist & Spray Clear allows you to change the sheen to Gloss, Satin or Matt after spraying a colour and to give additional protection against weather, heat, cold, acid, alkali, corrosion and water with a sealer formula for enhanced and consistent coverage. It is UV absorbent, water resistant, protects against rust and will not fade or yellow. Easy spray technology provides added control to make spray painting easier, faster and cleaner. It can be recoated at anytime for simple, faster project completion. The can's large, comfortable finger pad requires 33% less finger pressure than other spray paint cans and the twist and lock mechanism means there is no separate top to remove or replace after use. The cap and button design shields the finger from paint for a cleaner spray-painting process.PKT24000 Alkyd spray has the following specifications:Colour: Clear. Finish: Gloss. Pack size: 400ml.
The Irwin Turbomax range of drill bits are suitable for portable and cordless drills. They are primarily designed for drilling metal and sheet metal but also performs exceedingly well in all types of wood and plastics and can be used for drilling stainless steel. Please note that if used for drilling stainless steel, a coolant should always be used.Irwin Turbomax HSS Drill Bit.Single pack. Size: 13.0 x 151mm.
Main Product Description:
The FloPlast Solvent Weld Soil 92.5 Degree Bend Grey is a versatile plumbing component designed for use with PVC soil pipes. It features solvent sockets on both ends that allow it to be connected to plain ended pipes or other fittings using solvent welding techniques. The 92.5-degree angle provides a smooth transition in changing the direction of the pipe, making it suitable for use in various applications without compromising water flow and drainage efficiency.
Features:
- Constructed from high-quality PVC material for durability and resistance to corrosion
- Designed for use with standard PVC soil pipes
- Solvent sockets on both ends enable easy connection to plain ended pipes or other fittings
- Available in different sizes, including 50mm and 110mm diameters
Benefits:
- Promotes efficient water flow and drainage by reducing turbulence caused by sharp angles
- Ensures seamless integration with existing plumbing systems due to its universal compatibility
- Offers long-term performance and reliability, even under harsh environmental conditions
Main Product Description:
The FloPlast Solvent Weld Soil Branch Grey SS191 is a high-quality component for soil pipe systems, designed to join horizontal and vertical pipes with ease. With its unique 92.5-degree angle, it ensures a self-cleaning fall while providing a secure connection for all three connections using solvent sockets.
Features:
- Resistant to inorganic acids, alkalis, and boiling water
- Made from robust PVC-U material
- Available in olive grey color
- Suitable for use with plain-ended pipes or other fittings
- Self-cleansing due to its angled design
Benefits:
- Enhanced durability against various chemicals and heat sources
- Versatile fitting suitable for various pipe configurations
- Aesthetically pleasing olive grey finish
- Improved water flow due to self-cleansing angle
The McAlpine OBT1-CO is a plumbing component, specifically a multifit outlet offset trap with a 75mm water seal. It is designed for use with appliances such as dishwashers and washing machines, as well as other types of domestic and commercial equipment that discharge waste water.
The OBT1-CO features a 19/23mm inlet and outlet, making it compatible with a range of pipe sizes. It has a unique offset design, which allows it to be installed in tight spaces and where there are existing pipework or obstructions. The trap is made from high-quality polypropylene plastic, which is lightweight and durable.
The multifit outlet of the OBT1-CO allows it to be connected to a range of pipework, including push-fit and solvent weld systems, making it a versatile option for a variety of plumbing applications. The trap also features a removable, easy-to-clean seal, which helps to prevent blockages and keep the system running smoothly.
Overall, the McAlpine OBT1-CO is a reliable and efficient offset trap that is suitable for use in a wide range of plumbing applications. It is a popular choice among plumbers and builders for its versatility, durability, and ease of installation.
・ 19/23mm Inlet and Outlet
・ Trap receives discharge from condensing boiler
・ Supplied with Support Clip
・ Conforms to BS EN 274-1:2002, BS 6798:2009 and Building Regulations Approved Document H
The McAlpine Bath Plug & Chain is a reliable and sturdy option for sealing your bathtub drain. The set includes a plug with a durable rubber seal and a sturdy chain to prevent it from being lost down the drain. The plug is designed to fit securely in most standard bathtub drains and is easy to install. The chain is attached to the plug and can be easily removed if necessary. This bath plug and chain set is a must-have for any bathroom renovation or repair project, providing a simple and effective solution for sealing your bathtub.
・ Mounted on Card with Hanging Slot
・ Bath Plug & Chain
・ Available with or without triangle
The Master Lock Stainless Steel Fixed Dial Combination Padlocks have 18mm hardened steel shackles. They are a tough and durable leisure/lifestyle security solution, ideal for locking up a locker or sports bag. Designed to be tough, practical and durable, but to look good as well. Supplied with a Lifetime Warranty against mechanical failure. Suggested uses: lockers, cupboards and sports bags. Please note: Colours may vary. Specification Internal Shackle Dimensions: 17 x 18mm.Shackle Thickness: 6mm.
The McAlpine 1 1/4" BSP Nut S8A is a plumbing fitting made by McAlpine that is used to connect pipes in waste and drainage systems.
The "1 1/4"" measurement refers to the diameter of the pipe that the fitting is designed to connect to. The "BSP Nut" designation refers to the type of threading on the fitting, which is designed to connect to other components with BSP threading.
The "S8A" model number likely refers to a specific variant or version of the fitting, although without additional context it's hard to say for sure.
Overall, the McAlpine 1 1/4" BSP Nut S8A is a specific plumbing fitting that may be useful in certain waste and drainage systems where a threaded connection is required to connect pipes or other plumbing components.
・ Available in 1¼", 1½", and 2" sizes
The JRP Riveting Products Battery 18V-2.0A-36W is designed to provide reliable power for your NB/RB tools. This high-performance battery ensures optimal functionality and longevity, making it an essential accessory for any professional or DIY enthusiast.
High Capacity: 18V-2.0A-36W for extended use.
Compatible: Specifically designed for NB/RB tools.
Durable: Built to withstand rigorous use in various environments.
Easy Installation: Simple to replace and use with existing tools.
Reliable Performance: Ensures consistent power delivery for efficient work.
Our Garden Barbed Wire is designed for effective fencing solutions. With a length of 15 meters and a thickness of 2.50mm, this durable wire is perfect for securing your garden or property.
High-Quality Material: Made from galvanized steel for enhanced durability.
Easy Installation: Simple to install, making it ideal for DIY projects.
Versatile Use: Suitable for gardens, farms, and other outdoor areas.
Strong and Reliable: 2Ply construction ensures strength and longevity.
Effective Security: Barbed design deters intruders and keeps livestock secure.
The Thunderbolt All-Purpose Anchors Pan Head ZYP - M5 x 50 are designed for versatile anchoring in various materials. These anchors provide reliable support for a range of applications, making them ideal for both DIY enthusiasts and professionals.
High-Quality Material: Made from durable materials for long-lasting performance.
Easy Installation: Designed for quick and straightforward installation.
Versatile Use: Suitable for various applications, including wood and masonry.
Secure Hold: Provides a strong and reliable anchor point.
Compact Size: M5 x 50 size is perfect for a variety of projects.
The Unifix Mudguard Washers HV140 Bright Zinc Plated are designed for reliable performance in securing mudguards. With a size of M6 x 40 x 1.5, these washers are perfect for various applications.
High-Quality Bright Zinc Plated Finish for Durability
Designed for M6 Bolts, Ensuring a Secure Fit
Ideal for Use in Automotive and Bicycle Applications
Easy to Install, Saving Time on Projects
Robust Construction for Long-Lasting Use
These Dormer 2 piece sets each feature a tap and its corresponding pre-hole drill in one convenient package, helping to save time and error.The packs contain an A002 split-point jobber drill and a straight flute tap. The taps are suitable for threading up to 1.5x their diameter in most materials (ISO Standard). Two tap options are available: Second tap for through drilling, or a bottoming tap for blind holes.Specifications: Tap Type: SecondThread Size: M6
The Unifix Mudguard (Penny) Washers HV140 Bright Zinc Plated are designed for reliable fastening in various applications. With a size of M5 x 25 x 1.5, these washers provide excellent support and durability.
High-Quality Bright Zinc Plated Finish: Ensures resistance to corrosion and wear.
Perfect for Mudguard Applications: Specifically designed to secure mudguards effectively.
Standard M5 Size: Compatible with a wide range of fittings and fixtures.
Easy Installation: Simple to use, making them ideal for both DIY and professional projects.
Durable Construction: Built to last, providing long-term reliability in various conditions.
The JCP Fixings A4-316 Stainless Steel Internal Threaded Sockets are designed for durability and reliability in various applications. With a size of M10 x 90, these sockets are perfect for secure connections in both DIY and professional settings.
High-Quality A4-316 Stainless Steel for Corrosion Resistance
Internal Threaded Design for Easy Installation
Ideal for Use in Marine and Outdoor Environments
Compatible with Standard M10 Bolts and Screws
Perfect for Structural and Mechanical Applications
The McAlpine White Plastic Cover Plate & Insert Tube Tsgwcover+Tube is a plumbing component designed to provide a neat and tidy finish to a wall or floor-mounted waste pipe. It consists of a white plastic cover plate and an insert tube, both of which are made from durable and high-quality materials.
The cover plate is designed to be screwed or glued onto a wall or floor surface to conceal the waste pipe and create a clean and finished look. The insert tube is designed to fit inside the waste pipe, providing additional support and preventing blockages.
This product is manufactured by McAlpine, a leading manufacturer of plumbing and drainage systems, and is designed to meet the highest standards of quality and durability. It is suitable for use in a wide range of applications, including commercial and residential buildings, and is easy to install and maintain.
Main Product Description:
The FloPlast Solvent Weld Soil 90 Degree Spigot Bend is a versatile plumbing component designed for creating a sharp 90-degree turn in soil piping systems. Available in both black and olive grey finishes, this bend features a long spigot tail that can be easily connected to other fittings using a solvent weld technique. It provides a reliable solution for changing directions in pipe layouts without compromising flow rate or system integrity.
Features:
- Constructed from durable materials suitable for soil piping applications
- Long spigot tail for secure connection to other fittings
- Solvent socket at one end for easy installation
- Available in two popular colors: black and olive grey
- Designed for use with solvent weld techniques
Benefits:
- Enables precise changes of direction in pipe layouts
- Compatible with various piping systems and materials
- Provides a seamless transition between different sections of piping
- Adds flexibility to the design of pipe networks
The Black & Decker 10-in-1 Steam-Mop is ready to use in 30 seconds. For use on all hard floors and kills 99.9% of germs and bacteria. It has an easy-fill water tank, just fill with tap water, no chemicals are required. The swivel steering has a 180 degree pivoting mop head that can manoeuvre around furniture and in tight spaces. Supplied with: 1 x Nozzle, 1 x Large Squeegee with Foam, Plus Cover; 1 x Small Brush with Copper Bristles, 1 x Large Brush, 1 x Grout Brush, 2 x Small Brushes, 1 x Carpet Glider and 1 x Microfibre Pad. Specification: Input Power: 1,300WPre-Heating Time: 30 secondsSteam Temperature: 120 degreeCCable Length: 4m
Type 8/180/300/E/J brad nails. Suitable for use with all Stanley brad nailers. Plastic box of 1,000 nails.Fits Stanley: TR200series, TRE500series, 69-702, 69-721 and SWK-BN125 Size: 15mm Qty: 1000
John Guest equal tee push-fit fitting connects three equally sized pipes. Fast and simple to install, John Guest Air and Pneumatics creates an instant connection and airtight seal without the need for tools, hot works or sealing agents. Air piping systems can be set up and installed 50% quicker than traditional methods. The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are also fully demountable, reducing system downtime during maintenance and making it quick and easy to modify or extend systems. Designed in tough engineered plastic, fittings are compatible with John Guest nylon, powder coated aluminium or LLDPE tubing, as well as copper, PEXa and other soft metal pipe materials. All John Guest fittings are manufactured and assembled in the UK. Strong acetal copolymer fitting with nitrile O-Ring Airtight connection with superior flow characteristics Instant push-fit connection and demountable without tools Secure collet cover prevents accidental disconnection Suitable for air and pneumatics piping systems up to 10 bar Ideal for air, inert gases and vacuum applications Food grade fitting suitable for potable liquids Compatible with soft metal or plastic pipe/tubing
John Guest equal tee push-fit fitting connects three equally sized pipes. Fast and simple to install, John Guest Air and Pneumatics creates an instant connection and airtight seal without the need for tools, hot works or sealing agents. Air piping systems can be set up and installed 50% quicker than traditional methods.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are also fully demountable, reducing system downtime during maintenance and making it quick and easy to modify or extend systems.
Designed in tough engineered plastic, fittings are compatible with John Guest nylon, powder coated aluminium or LLDPE tubing, as well as copper, PEXa and other soft metal pipe materials. All John Guest fittings are manufactured and assembled in the UK.
Strong acetal copolymer fitting with nitrile O-Ring
Airtight connection with superior flow characteristics
Instant push-fit connection and demountable without tools
Secure collet cover prevents accidental disconnection
Suitable for air and pneumatics piping systems up to 10 bar
Ideal for air, inert gases and vacuum applications
Food grade fitting suitable for potable liquids
Compatible with soft metal or plastic pipe/tubing
Pack of 3
The JG Speedfit ball valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work using an easy to operate ¼ turn handle. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release.The JG Speedfit ball valve is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.
Instant push-fit service valve with integrated isolation handle
Red and blue indices for easy identification of water supply
Install and demount in seconds without tools
Safe flame-free installation, with no hot works, glue or flux
Grip & Seal collet with stainless steel teeth and main O-Ring seal
Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
Suitable for hot and cold water (not suitable for central heating)
Listing is for one Valve but this comes with a red and blue insert to go in the handle of the valve.
The JG Speedfit ball valve enables the flow of water to a fixture or appliance to be isolated in the event of an emergency or for maintenance work using an easy to operate _ turn handle. Simply push the valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe release. The JG Speedfit ball valve is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK. Instant push-fit service valve with integrated isolation handle Red and blue indices for easy identification of water supply Install and demount in seconds without tools Safe flame-free installation, with no hot works, glue or flux Grip & Seal collet with stainless steel teeth and main O-Ring seal Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe Suitable for hot and cold water (not suitable for central heating)Pack of 2
