Flexovit emery cloth sanding sheets have an incredibly strong cloth backing for increased product strength and durability. Can be torn into strips for detailed work and is suitable for hand or power tool use. Ideal for removing rust, paint and scale from metal surfaces. The fine grits are also ideal for preparing and polishing metal. Size: 230 x 280mm.Grit: 80 (medium).Pack quantity: 3.
ForgeFix Hex Head Lightning Bolts provide a virtually stress-free fixing for close to edge applications. They are self-threading and allow quick and easy installation of most masonry fixing applications. They can simply be screwed into a pre-drilled hole, without the need for a sleeve or plug. The bolts are through-fixing, eliminating the need for marking and re-positioning. They have a high load capacity due to the thread interlocking into the base material. The bolts have an 'Elementech' coating for superior anti-corrosion, which has been salt spray tested to 1,000 hours. Applications: Widely used for fixing battens, balustrades, handrails, racking and holding down machinery, plus many more installation applications. Suitable for most masonry substrates including concrete and brickwork but also for hollow block or bricks due to the nature of the thread type anchoring along the total length of the fixing.Specifications: Size: M8 x 75mm.Pack quantity: 100mm.
These Forgefix Set Screws are made from grade 8.8 steel and are zinc plated for increased resistance to corrosion. They are fully threaded and conform to DIN 933 standards.Can be used with many Nut types and washers. APPLICATION:For fastening together numerous types of material or to be fastened in to pre-tapped holes.Widely used in many engineering applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.High Tensile Set Screw ZP M5 x 30 Bag 10
These Forgefix Through Bolts (also known as Wedge Anchors or Toothless Anchors) have a Zinc Yellow Passivated finish for durability and corrosion resistance. They are through-fixing, and extremely economical and quick to install. APPLICATIONIdeal for fixing brackets, cladding, restraints, racking, fabricated stairwells and industrial doors.Ensure the correct socket drive or spanner is used to ensure accurate installation. The Zinc Yellow Passivation process of electroplating is similar to the Galvanised and Zinc Plated processes but with the addition of a yellow dye. It provides a coating that is aesthetically pleasing, and which offers excellent resistance to corrosion.Through Bolt Zinc Yellow Passivated M10 x 80 Bag 10
Forgefix TechFast Roofing Sheets to Steel Hex Screws are used for joining metal roofing panels to steel frame buildings. The screws are fire resistant and corrosion resistant. Protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours. Complies with EU Safety, Health and Environmental requirements. They are supplied with 16mm EPDM rubber washers.These Forgefix TechFast Roofing Sheets to Steel Hex Screws have the following specification: Size: 5.5 x 100mmEffective Thread Length: 77mmPack Size: 100Drill Tip: No.5 No.5 drill tip for self-drilling in heavy gauge steel up to 12.5mm.
These Forgefix Rimmed Expansion Wall Plugs are made from 100% Nylon. They rest on the surface of the base material and are particularly useful when the depth of the base material is not known. Sprung anti-spin fins provide a two-way lock, preventing spinning and loosening from overhead applications.Due to the precise two-way expansion, the plugs are suitable for close to edge applications. APPLICATION:Ideal for both lightweight and medium-duty fixing applications. Often used for satellite dish installation.Suitable for all types of threaded screws, including multi-purpose, general purpose, coach screws etc. Not suitable for machine screw threads.Nylon Wall Plug Rimmed M8 x 40 Bag 100
These Forgefix Carriage Bolts are Zinc Plated, and ideal for timber to timber joining. They come complete with a hex nut and are fully threaded to 100mm. Also known as 'Cup Square Hex Bolts', the square underneath the Cup stops rotation of the bolt when tightening. Conform to DIN 603 and DIN 934 standards. Available in a comprehensive range of sizes to suit most applications. APPLICATIONUsed mainly for fastening timber to timber and is extensively used for timber joist construction in house building and numerous decking applications. A Carriage Bolt, also known as a Coach Bolt or as a ‘Fully Threaded Cup Square Hex Bolt’, has a domed or countersunk head, and the shank is topped by a short square section under the head. The square section grips into the part being fixed (typically wood), preventing the bolt from turning when the nut is tightened. A rib neck Carriage Bolt has several longitudinal ribs instead of the square section, to grip into a metal part being fixed. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.Carriage Bolt & Nut ZP M8 x 180 Bag 10
These Forgefix Pozidriv Machine Screws are designed for use with nuts or pre-tapped holes. They are Zinc plated for increased corrosion resistance. The countersunk head is suitable for pre-countersunk holes or when fastening to timber to leave a flush surface. APPLICATION:Ideal for use in many DIY, ironmongery, electrical and plumbing applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. A Machine screw is generally a smaller fastener, threaded the entire length of its shank that usually has a recessed drive type (Slotted, Phillips, etc.). Countersunk heads are designed to sink flush with substrates to leave a smooth surface finish.Machine Screw Pozi Countersunk ZP M6 x 50mm Bag 25
The Forgefix Phillips fine thread, wafer head Drywall Screws are zinc plated for increased durability. They come complete with a Phillips No.2 insert bit.The screws have a self drilling hardened point designed for fitting dry linings to steel framework without drilling pilot holes. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers. Zinc plating is the most common, economy, electroplated coating which is normally applied to ferrous components to give enhanced corrosion protection. The relatively low cost, protective nature and attractive appearance of zinc make it a popular coating for nuts, bolts, washers, screws, and similar interior components. In addition, zinc serves as an effective undercoat for paints when high corrosion performance is required. The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a Phillips screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head. The wafer head distributes the load under the screw head, offering a firm positive fixing in a similar way to that of a washer. Fine thread screws have an extremely sharp point which not only pierces the plasterboard skin but will also allow the screw to drill through thin steel base structures.
Forgefix TechFast Roofing Sheet to Steel Hex Light Duty Screws are used for joining metal roofing panels to steel frame buildings. The screws are fire resistant and corrosion resistant. Protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours. Complies with EU Safety, Health and Environmental requirements. Supplied without washer.These Forgefix TechFast Roofing Sheet to Steel Screws have the following specification: Size: 5.5 x 38mmEffective Thread Length: 24mmHead Type: 8mm HexPack Size: 100Drill Tip: No.3 No.3 drill tip for self-drilling in heavy gauge steel up to 5mm.
These Forgefix Multi-Purpose Pozi Screws with countersunk heads have a zinc yellow passivated finish for increased durability. The screws are immensely popular and versatile, and used in all trades including joinery, electrical and plumbing. Also widely used in DIY applications. APPLICATIONSuitable for use with many materials including PVCu, Timber, Chipboard, MDF, and other similar types. The Zinc Yellow Passivation process of electroplating is similar to the 'Galvanised' and 'Zinc Plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish, whilst having excellent resistance to corrosion. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have single threads, designed to offer higher pull out values and quicker insertion.Multi-Purpose Pozi Screw Countersunk ST ZYP 6.0 x 70mm Box 100
These Forgefix Masonry Anchor Projection Bolts have a Zinc Yellow Passivated finish for increased durability and resistance to corrosion. They have a tough and reliable construction to cover most heavy-duty fixing applications. The four-way expansion shield offers extremely strong and secure anchorage, and the specially manufactured retaining spring ensures encapsulation of the wedge during expansion. Projection bolts offer easier fixture removal or repositioning due to the bolt remaining in the shield. APPLICATION:Ideal for securing reinforcement wall plates, lighting supports, guy ropes and bracketry.Ensure the correct socket drive or spanner is used to ensure accurate installation. When sizing a Masonry Anchors it is most important to know the depth of the material that you are fixing.Eg: Size M610: The 'M6' is the thread size of the bolt. The '10' denotes the maximum thickness of material it will fix. The Zinc Yellow Passivation process of electroplating is similar to the ‘Galvanised’ and ‘Zinc Plated’ processes but with the addition of a yellow dye. It provides a coating that is aesthetically pleasing, and which offers excellent resistance to corrosion.Masonry Anchor Bolt Projecting Zinc Yellow Passivated M8 x 40 Bag 10
These Forgefix Screw Cup Washers have a solid brass finish to avoid corrosion. They are quick and easy to install, with no need to countersink screws. APPLICATIONTo enable flush finish in numerous joinery installations.Can be used with most screw types.Screw Cup Washers Solid Brass Polished No.6 Bag 200
This Forgefix fixing band is medium-duty, flexible and strong with pre-punched holes for fixing bolts and screws. It is pre-galvanised and PVC coated to provide resistance against corrosion and heat. It is easy to cut and bend. Supplied in 10m rolls in a dispensing box.Available in red, black or white. APPLICATION:Ideal for fixing, supporting cable, ducting and many more superficial installations.Black Plastic Coated Pre-Galvanised Band 17mm x 0,8 x 10m Box 1
Forgefix TechFast Timber to Steel CSK/Wing Screws are used to join timber to steel frame buildings. The screws are fitted with breakaway wings that create a clearance hole to protect thread from engaging timber when drilling through. Breakaway wings will ream a hole, then break-off when they contact the metal surface to be drilled. The thread will then engage with metal. They have a TORX® compatible insert for a higher transmission of power. With improved countersinking from recessed ribs. Fire and corrosion resistant. Complies with EU Safety, Health and Environmental requirements.These Forgefix TechFast Timber to Steel CSK/Wing Screws have the following specification: Size: 5.5 x 150mmClamping Thickness: 130mmEffective Thread Length: 129mmPack Size: 50Drill Tip: No.3 No.3 drill tip for self-drilling heavy gauge steel up to 5mm.
These Forgefix Set Screws are made from grade 8.8 steel and are zinc plated for increased resistance to corrosion. They are fully threaded and conform to DIN 933 standards.Can be used with many Nut types and washers. APPLICATION:For fastening together numerous types of material or to be fastened in to pre-tapped holes.Widely used in many engineering applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.High Tensile Set Screw ZP M8 x 90 Bag 10
These ForgeFix ForgeFast Wood Screws have a universally accepted, Pozi compatible drive. They have 6 underhead lobes for improved countersinking and reduced surface dust, and reinforced countersunk necks which improve holding power. The screws have an anti-friction thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber and improved drawing strength. The thread is serrated for improved pull-out and reduced torque when inserting the screw. The double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel. The screws have a 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use.Size: 5.0 x 120mm.Box quantity: 100.
These Forgefix Hammer Fixings include both plug and Pozi head screw. The plug is made from Nylon for a longer life and durability and the anti-rotation barbs prevent the plug from rotating in the hole. The fixings are through fixing, eliminating the need for marking and re-positioning. To use, simply drill through both fixture and into the base material and tap in the Hammer Fixing with a strong blow to complete the fix and ensure full expansion. The screw can be released if required. APPLICATIONWidely used for baton, window and door frame fixing. Quick and easy to use - ideal for repetitive installations.Ensure the correct Pozi drive insert bit is used to release fixture and fitting if required.Hammer Fixing & Plug M6 x 50 Bag 10
These Forgefix Masonry Anchor Projection Bolts have a Zinc Yellow Passivated finish for increased durability and resistance to corrosion. They have a tough and reliable construction to cover most heavy-duty fixing applications. The four-way expansion shield offers extremely strong and secure anchorage, and the specially manufactured retaining spring ensures encapsulation of the wedge during expansion. Projection bolts offer easier fixture removal or repositioning due to the bolt remaining in the shield. APPLICATION:Ideal for securing reinforcement wall plates, lighting supports, guy ropes and bracketry.Ensure the correct socket drive or spanner is used to ensure accurate installation. When sizing a Masonry Anchors it is most important to know the depth of the material that you are fixing.Eg: Size M610: The 'M6' is the thread size of the bolt. The '10' denotes the maximum thickness of material it will fix. The Zinc Yellow Passivation process of electroplating is similar to the ‘Galvanised’ and ‘Zinc Plated’ processes but with the addition of a yellow dye. It provides a coating that is aesthetically pleasing, and which offers excellent resistance to corrosion.Masonry Anchor Bolt Projecting Zinc Yellow Passivated M10 x 30 Bag 5
Flexovit cloth sanding belts are made from tough and sharp high performance Aluminium Oxide. This product is extremely durable, long lasting and suitable for use on a variety of surfaces. Available in multiple sizes to suit most brands of belt sanders, and suitable for use on wood, paint and metal.Pack of 2 Flexovit Cloth Sanding Belts 610 x 100mm 50g Coarse
Aluminium Oxide fibre discs are tough and sharp, combined with a dense semi-rigid backing gives this product extremely long life. It is ideal for working on metal using an angle grinder. Use with FLV56835 backing pad, sold separately.1 x Pack of 3 Flexovit Aluminium Oxide Fibre Discs 115mm Medium 50g
ForgeFix Spectre TimberFix are advanced Timber Fixing Screws that are widely used in exterior timber, fencing and landscaping applications. The screws have a multi-layer green Ruspert coating, which is salt spray tested to 1000 hours. They are also surface hardened for extra durability. The screws have an 8mm Hex Flange Head and feature a reamer to prevent jacking. Other features include a Quickstart Type 17 slash point, synthetic lubrication and under head ribs for a secure fix.Box of 50 ForgeFix Spectre TimberFix Screws 6.3 x 87mm.
Flexovit powerfile sanding belts are made from tough and sharp high performance Aluminium Oxide making this product extremely durable, long lasting and suitable for use on a variety of surfaces. Suitable for use on wood, paint and metal. Size: 454 x 13mm.Packed in 4s
Flexovit cloth sanding belts are made from tough and sharp high performance Aluminium Oxide. This product is extremely durable, long lasting and suitable for use on a variety of surfaces. Available in multiple sizes to suit most brands of belt sanders, and suitable for use on wood, paint and metal.Pack of 2 Flexovit Cloth Sanding Belts 610 x 100mm 120g Fine
These Forgefix flat Bellwire Clips have hardened masonry nails for increased efficiency, and which will fix into timber, blockwork and mortar. The nail should not be hammered directly in brick, and fixing into mortar is recommended. Application:For fitting bell wire cable to timber or masonry in audio, visual and both commercial and domestic cabling.Cable Clip Flat White 1.00mm Box 100
Flexovit drill mountable discs are made from high performance aluminium oxide drill mountable discs have a strong paper backing for maximum durability and can be used on a variety of surfaces. Use with FLV56833 backing pad, sold separately. Size: 125mm.1 x Pack of 10 Flexovit Drill Mountable Discs 125mm Fine 120g
The Unifix Class 6 Dome Nuts Bright Zinc Plated DIN 1587 - M12 x 1.75 are designed for secure fastening in various applications. Made from high-quality materials, these dome nuts provide durability and reliability.
High-Quality Bright Zinc Plated Finish for Corrosion Resistance
Designed to Fit M12 x 1.75 Threaded Applications
Class 6 Strength for Enhanced Load-Bearing Capacity
Easy to Install with Standard Tools
Ideal for Use in Automotive and Construction Projects
The Hi-Spec HSA/BC/RF10-PRO is a reliable radio frequency battery carbon monoxide detector designed to keep your home safe. With a 10-year lithium battery, it ensures long-lasting protection against CO hazards.
10-Year Lithium Battery: Provides peace of mind with long-term reliability.
Radio Frequency Technology: Enhances communication and alerts for safety.
Easy Installation: Designed for quick and hassle-free setup.
Compact Design: Fits seamlessly into any home environment.
Reliable Detection: Ensures early warning for carbon monoxide presence.
The Ronseal One Coat Shed & Fence Protector. It does exactly what it says on the tin. Except, this one doesn't come in a tin or a bucket, it comes in a pouch! It's exactly the same as our ready-mixed One Coat Shed & Fence Protector buckets, the only difference is you just mix it with water at home. That means this little pouch is perfect for using as a refill. No more buying multiple heavy buckets of One Coat Shed & Fence Protector, now just buy one bucket and replace your additional buckets with pouches. It's easy to use, it can be brushed or sprayed on in one coat, and it'll stand up to rain, frost, snow and sun, meaning you'll get lasting colour and protection for 2 years. One 950ml pouch makes 5 litres of Shed & Fence Protector.
1 x Ronseal One Coat Shed & Fence Refill Pouch Tudor Black 950ml
The Unifix Class 8 Nylon Insert Nuts P Type DIN 982 Bright Zinc Plated - M6 x 1.00 (Box of 5000) are designed for reliable fastening in various applications. These nuts feature a nylon insert that provides enhanced grip and prevents loosening under vibration.
High-Quality Construction: Made from durable materials for long-lasting use.
Nylon Insert: Ensures a secure fit and reduces the risk of loosening.
Standard Size: M6 x 1.00, suitable for a wide range of projects.
Versatile Application: Ideal for both DIY and professional use.
Easy to Install: Designed for quick and straightforward installation.
The STANLEY FatMax Anti-Slip Combination Wrench provides improved bolt contact, reducing the chance of slippage. Forged in corrosion-resistant chrome vanadium steel with a satin chrome finish for strength and durability. With a 12-point versatile box end for easy fitting over nuts and bolts. It also has a 15 degree offset open and box end offering improved access and torque.1 x STANLEY FatMax Anti-Slip Combination Wrench 15mm
The Unifix Class 6 Full Nuts DIN 934 Galvanised 0.3mm - M24 x 3.00 are designed for high-strength applications, ensuring durability and reliability in various projects.
High-Quality Galvanised Finish: Provides excellent corrosion resistance.
Class 6 Strength: Ideal for heavy-duty applications.
Standard DIN 934 Compliance: Ensures compatibility with various fasteners.
Easy Installation: Designed for straightforward assembly in mechanical applications.
Versatile Use: Suitable for both DIY and professional projects.
The Unifix Class 17H Lock Nuts DIN 936 Plain - M30 x 3.50 are designed for secure fastening in various applications. These lock nuts provide excellent resistance to loosening under vibration, ensuring reliability in your projects.
High-Quality Material: Made from durable materials for long-lasting performance.
Secure Fastening: Designed to prevent loosening, ideal for critical applications.
Easy Installation: Simple to use with standard tools, saving you time.
Versatile Use: Suitable for a wide range of industrial and DIY projects.
Precision Engineering: Manufactured to DIN 936 standards for consistent quality.
The Unifix Class 6 Studding Connectors DIN 6334 Bright Zinc Plated - M12 x 36 are designed for reliable and secure connections in various applications. Made from high-quality materials, these connectors ensure durability and strength.
High-Quality Bright Zinc Plated Finish for Corrosion Resistance
Designed for Class 6 Applications for Enhanced Performance
Easy to Install with Standard M12 Thread Size
Ideal for Use in Construction and Engineering Projects
Compatible with Various Studding Systems for Versatility
The Unifix Class 6 Studding Connectors DIN 6334 Bright Zinc Plated - M10 x 30 are designed for reliable and secure connections in various applications. Made from high-quality materials, these connectors ensure durability and strength.
High-Quality Bright Zinc Plated Finish for Corrosion Resistance
Designed for Class 6 Applications for Enhanced Performance
Easy to Install with Standard M10 Thread Size
Ideal for Use in Construction and DIY Projects
Compatible with Various Studding Systems for Versatility
The Unifix Class 6 Dome Nuts Bright Zinc Plated DIN 1587 - M8 x 1.25 are designed for secure fastening in various applications. Made from high-quality materials, these dome nuts provide excellent durability and reliability.
High-Quality Bright Zinc Plated Finish for Corrosion Resistance
Class 6 Strength for Enhanced Load-Bearing Capacity
Compatible with M8 x 1.25 Threaded Applications
Easy to Install with Standard Tools
Ideal for Use in Automotive and Construction Projects
