This Bulldog Insulated Rabbiting Spade features a one piece, heavy-duty fibreglass handle for superior strength and durability. Its narrow blade allows you to dig thin channels without taking too much material. Tempered for strength and rigidity, the spade is epoxy paint coated to provide optimum protection against corrosive substances. The 72in insulated handle allows extra leverage and makes it easier to dig deeper without putting strain on your back. Manufactured to BS8020. Individually tested to 10,000 volts, guaranteed to 1,000 volts, and supplied with a Certificate of Conformity.
Profil 2 is a section setting tool. These metal frame pliers are for quick and efficient punching and setting of rails and studs in drywall insulation. They make it possible to work close to a wall and no screws or anchors are needed. Jaw Opening: 15mm.Length: 330mm (13in).Width: 60mm (2.3/8in).
The Multi-Purpose Kit has a manual ignition blowtorch assembly with a standard blowlamp type nozzle, 7.7kW output and is suitable for all general heating work. Suitable for plumbing, building, roofing and engineering applications. Hose length: 4m
The Irwin carbide tipped mortar rake cutters are ideal for the fast and efficient removal of mortar and cement joints in brickwork repointing applications and for chasing out channels for the installation of cable, pipes and switchboxes. They can be used with the Irwin mortar raker sole plate and small angle grinders.The Irwin IRW10507229 Mortar Rakes (2 pieces) 3 cutter have the following dimensions:Size: 8.0 x 20/40mm
Super head combination spanner 21mm (7/16 W). The speed head ratchet allows the spanner to be turned without the head leaving the nut. Manufactured from quality plated steel, it is ideal for use in very confined spaces.
The Roughneck Trenching Tamper has a reinforced cast iron head with a perfectly flat face. They have strong but lightweight fibreglass handles with soft cushion grip for comfort.This Roughneck Earth Rammer (Tamper) has the following specification: Head Weight: 4.5kg (10lb)Head Size: 200mm² (8in²)Handle Length: 1.06m (42in)
Gorilla Tubs are flexible, which is the key to the millions of jobs they can perform. They are great for mixing small batches of plaster and mortar; if the mix dries, a few kicks to the flexible body will remove the muck easily. They can be carried with both handles in one hand, shaped for pouring, pressed flat to the floor for scooping, pushed flat against a wall for scraping wallpaper into, catching leaks and so on. Gorilla Tubs are extremely durable and long lasting. The handles have been EU tested and have a working weight of 100 kilos (220 lb), so really heavy loads can be carried between two people. Gorilla Tubs can be used as tool bags, water tubs, rubble removers, roofing, scaffold knuckles, collecting bits, broken glass carrier etc. Features:Infinitely Versatile.Super Flexible.Frost proof.UV Sunlight Proof.Handles CE Tested.Reinforced in key areas for durability.Ribbed profile for strength.The GORTUB75BLK Gorilla Tub Large Size 75 Litre (16 gal) has the following specification: Height: 37cm.Diameter: 57cm.Colour: Black.
The Bulldog Insulated Double Ended Crowbar is used to break materials into smaller pieces, as well as being used to force materials apart. Work with either a pointed or chisel end tool. The head has been tempered for strength and rigidity. Epoxy paint coated to provide optimum protection against corrosive substances, and fitted with a one piece, heavy-duty fibreglass handle for superior strength and durability. Manufactured to BS8020. Individually tested to 10,000 volts, guaranteed to 1,000 volts, and supplied with a Certificate of Conformity.
The Sievert Pro 86 Handle is a single valved handle mainly for smaller burners. The spindle and valve are designed to give a very exact and quick flame setting. It has an ergonomicly designed plastic composite handle, and all-metal parts. Ideal for Jewellers and other precison work. It is supplied without a hose nipple, and the hose connection is BSP 3/8in LH.
This Bulldog Floor Scraper has a flexible blade made from hardened spring steel, and tubular steel handle. It is perfect for cleaning the floors of barns, garages and patios, and will clear debris and rubbish with ease. It is ideal for removing oil or compacted material, such as mud. Blades can be replaced. The BUL1190 Premier Floor Scraper has the following specifications:Handle length: 1220mm (48in)Head width: 203mm (8in)Blade part number: 1911
Replaceable sanding sheet designed for use with Marshalltown Vacuum sander model VS733.Replaceable sanding sheet designed for use with Marshalltown Vacuum sander model VS733.120 grit
Drywall board lifter designed for easy use, with a tapered front end which will slide easily under boards, and will hold in place while nailing. Can also be used for fitting doors. Size: 300 x 130mm (12 x 5.1/4in).
This RST Drywall Putty Knife is a drywall lining tool. It has a comfortable soft touch handle which provides excellent grip.Flexible blade. Size: 15.2cm (6 inch).
These Roughneck Gorilla Bars have a low profile claw that fits further under the workpiece for increased prying power, and the wider claw surface offers better control and resists sinking into the support surface. Made from drop forged alloy steel hardened and tempered, and with polished tips and oval shaped for better control and strength.The Gorilla Bar Tripple Pack contains the following: 1 x Gorilla Bar Junior 350mm (14in).1 x Gorilla Bar 600mm (24in).1 x Gorilla Bar 900mm (36in).
The Roughneck Aligning Bars are made from drop-forged alloy steel, hardened and tempered and with a hexagonal shank and polished tips. Ideal for aligning bolt holes during steel construction.1 x Roughneck Black Aligning Bar 610mm (24in)
The Rougneck Micro Cutter Mattock is made from drop-forged steel, hardened and tempered with black painted finish. It has a horizontal mattock edge at one end and a vertical one at the other. The fibreglass handle is strong yet lightweight, and the soft rubber grip provides comfort. They are ideal for use in confined spaces, such as in trenches, or between beddings, and can easily be carried in tool bags.
Heavy section aluminium darbies are used for preparatory surface finishing of walls. They have a 16mm lipped edge and a rigid back support. With adjustable handles for enhanced user comfort and control.Length: 1200mm (4 ft)Section: 120 x 16 mm (4 3/4 x 5/8 in) Lip.
The Hultafors 207 Steel Pinch Bar is made from 6-square high quality steel. It has a wide and thin chisel make it easy to use in narrow spaces. The long and cone shaped tip can be used for aligning flanges with bolt holes and the cone tip facilitates the installation of O-rings. The cone shaped tip is long and evenly grinded and both ends are unpainted to avoid discolouration.1 x Hultafors 207 Steel Pinch Bar 400mm (16in)
A solid forged, taper mouth shovel that is ideal for trench work, concrete mixing and general shovelling. It has an unvarnished hardwood handle with a metal YD hilt with a wooden cross dowel for added comfort. Size: No.2.Blade: 310 x 250mm (12 x 10in).
