This Marshalltown Flooring Shear cuts vinyl tile, plank, laminate, engineered wood, and more. It allows you to cut where you work without dust, noise, or electricity. The shear comes with a moveable fence for 90 degree and 45 degree cuts. It also has a built-in ruler for accurate cuts. Specification: Max. Cutting Width: 330mm (13in)Max. Cutting Thickness: 12.7mm (1/2in)
This R.S.T. Scarifier is used for scratching plaster undercoat. It has a blue steel blade and its soft-touch handle increases user comfort.Size: 300mm (12 inch).
Open ended cranked podger spanners manufactured from chrome alloy steel with a corrosion resistant black finish.The tapered end is generally used for hole alignment.Size 22mm.Length 281mm.
The BlueSpot Tools Brick Jointer is manufactured from A3 steel for increased durability. It's double ended shape allows for easy application. Suitable for finishing horizontal and vertical joints. Specifications: Joint Sizes: 1/2in and 5/8in.Length: 310mm.
The Bulldog Insulated Treaded Taper Mouth Shovel is the perfect tool for any contractor in need of a reliable and heavy duty shovel. Forged from one piece of steel with an epoxy paint coating to provide optimum protection against corrosive substances, the shovel's round cornered blade dramatically reduces penetration damage to underground pipes and cable. The treads enable you to use more force, and also act as boot protection, also fitted with a one piece, heavy-duty fibreglass YD handle. Manufactured to BS8020. Individually tested to 10,000 volts, guaranteed to 1,000 volts, and supplied with a Certificate of Conformity.
Bulldog's Standard range of tools are designed with the usual attention to detail and strength, but lower in price than other ranges. This cable laying shovel is forged from one piece of steel to give maximum strength. It has an all-metal construction, and a YD grip with a wooden cross dowel for added comfort. The narrow blade desing allows this tool to dig cable trenches without taking too much material. Its slightly dished blade and rounded cutting edges make it ideal for digging narrow trenches in clay and similar materials. Blade: 280 x 125mm (11 x 5in).Handle length: 711mm (28in).
Used by carpenters, electricians and plumbers for lifting floorboards or channelling recesses in solid floors. The chisel is forged from chrome vanadium steel for increased strength and durability. Blade holds its edge longer and therefore needs less sharpening. Hardened, quenched and tempered to precise specifications for added safety.Modified parabolic striking end for greater resistance to mushrooming and chipping.BI-Material handguard for increased comfort and protection from overstrike.Size: 280 x 75mm (11 x 3 in).
This Stanley FatMax Claw Bar is manufactured from spring steel for durability with a high visibility powder coated finish and polished tips. The polished bevel claws allow for precision nail pulling and prying and the non-slip grip provides increased leverage.1 x Stanley FatMax® Spring Steel Claw Bar 300mm (12in)
This all-steel grafting tool has a dished blade and a curved cutting edge which makes it ideal for clay digging and heavy ground breaking work. It has a forged blade, steel shaft and metal YD grip with wooden cross piece for added comfort. Blade: 320 x 165mm (12.3/4 x 6.1/2in).
Ash Handle with Plastic 'D' Grip. Is an ideal tool for shoveling out or backfilling trenches, concrete mixing, working tarmac and moving cement chippings etc. With an unvarnished hardwood shaft for strength and durability. The Standard Contractor range is designed with the usual Bulldog attention to detail but aimed at the budget-conscious contractor. Size: No.2. Blade: 315 x 250mm.
Square mouth shovel used for shovelling out or backfilling trenches, concrete mixing, working tarmac and moving sand, cement and chippings etc… Size: 000Width: 8inHardwood shaft: 28in.T handle.
This Marshalltown jointing knife is made from heat-treated, hardened and tempered annealed steel for an even hardness throughout the blade. It has a full tang throughout the handle, with a hammer end.The Marshalltown M-T5743 Joint knife has the following dimensions:Size: 100mm (4 inch)
Designed to give a professional finish to joints between bricks. Made from high carbon steel, hard tempered and polished. Convenient double ended cranked design. Made in USA.Size 16 and 19mm (5/8 and 3/4 in).
The Marshalltown 20D Hand Sander is lightweight and is fitted with an exclusive one-piece handle clamp that holds paper firmly and makes changing paper easy. It has a bonded foam pad and DuraSoft® handle, and is designed for pre-cut or half sheet standard sandpaper.
The Marshalltown Taping Knives are available with either a blue steel flexible blade or a stainless steel blade. They are fitted with a comfortable DuraSoft® handle, and are primarily used for smoothing jointing tape in drywall applications.Marshalltown M3512DS Taping Knife is made from Stainless Steel. Size: 300 x 75mm (12 x 3in).
Designed to give a professional finish to joints between bricks. Made from high carbon steel, hard tempered and polished. Convenient double ended cranked design. Made in USA.Size 19 and 22mm (3/4 and 7/8 in).
Faithfull all steel double ended jointing tool with a 5/8in radius at one end and 1/2in radius at the other. Quickly and accurately produces a professional finish when ‘Pointing Up’ joints between brick courses. Size: 12 x 16mm (1/2in x 5/8 in).
Faithfull stabilisers for use with external building profiles. Help to ensure quick and accurate bricklaying. Building profiles are easy to set up and simple to use. Pack of 2.
The Sievert 50mm 86kW Power Burner is a heavy-duty, lightweight power burner with extremely strong windproof flames capable of withstanding the severest weather conditions. Ideal for drying, bitumen laying, detail and field torching and other demanding applications. For use with PRMS3509, PRMS3510 or PRMS3511.
These Roughneck Gorilla Bars have a low profile claw that fits further under the workpiece for increased prying power, and the wider claw surface offers better control and resists sinking into the support surface. Made from drop forged alloy steel hardened and tempered, and with polished tips and oval shaped for better control and strength.1 x Roughneck Gorilla Bar 1220mm (48in)
Faithfull forged steel heavy-duty insulated taper mouth shovel for working on or near live cable. Featuring a solid forged steel head and a ‘YD’ handle. The insulated shaft has a solid fibreglass core and an abrasive resistant orange polymer coating. • ALL NOW WITH NEW IMPROVED WIDER HANDLE GRIPS• INDIVIDUALLY TESTED TO 10,000 VOLTS, AND GUARANTEED TO 1,000 VOLTS• CONFORMS TO: BS8020:2002• INTEGRATED SAFETY HAND STOP
Pry Bars are used extensively in the automotive trade for leverage and aligning, particularly on brake assemblies. Manufactured from forged alloy steel and powder coated to resist rusting.1 x Faithfull Pry Bar 400mm (16in)
