Faithfull packing wedges are designed to assist in the levelling of stud work, battens, door and window frames and many other applications were levelling wedges are required.These plastic shims are supplied in an assorted pack in six different thicknesses ranging from 1-6mm in 1 mm increments. Each size is colour coded for easy identification and shaped to hang from a frame fixing. The tip is tapered to allow for easy installation. Unlike timber spacers these shims are resistant to weather changes and are waterproof. Available in either a handy 100 pack or a trade bulk pack of 500.WEDGE100 is a pack of 100 assorted wedges containing: - 20 x Blue 1.5mm20 x Yellow 2.2mm20 x Green 3mm20 x Red 4mm10 x Purple 5mm10 x Black 6mm
The Lessman Plasterers Brush has a beechwood body with hardened steel pins. Used for roughening and structuring of plaster, prior to a final surface coat. This process ensures good adhesion of the final coat. Size: 190 x 95mm (7.1/2 x 3.3/4in).
The Faithfull Plasterers Scratching Tool with 7 prongs. The wire prongs are designed for scratching or keying interior and exterior plaster or render coats to ensure good adhesion of the second or finishing coat.
Robust construction consisting of an aluminium wheel with a tubular steel shaft for heavy-duty work.For hand mixing of plaster or similar material. Size: 900mm long x 180mm diameter.
The Faithfull open socket No.2 shovel which is fitted with a 1.4m (54in) long weatherproofed straight FSC European Ash handle. Specification: Size: No.2Blade: 300 x 220mm (12 in x 10in)Shaft: 1.4m (54in)
Flex Tubs are ideal for use around the garden, home, on the building site, farm or stables. This lightweight, heavy-duty polyethylene, flexible tub features super-strong comfortable handles and is ideal for solids and fluids.Environmentally friendly Flex Tubs are manufactured from 100% recyclable material.Colour: YellowSize: 42 Litre (9 gal)
The Faithfull Fluted Plugging Chisel has been designed to remove mortar from between bricks prior to re-pointing or the removal of a brick.The cutting edge is wider than the blade to give clearance, and the flute allows faster clearance of debris.Size: 230 x 5mm (9 x 3/16in).
The Faithfull flooring chisels are designed for cutting the tongue in laid tongued and grooved floorboarding in order to remove part of the board. They have a hardened and tempered cutting edge. NOT TO BE USED FOR CUTTING BRICKSThe Faithfull FAIEC214PG Flooring chisel is fitted with a sturdy rubber safety grip and has the following dimensions:Size: 230 x 57mm (9 x 2.1/4 inch). NOT TO BE USED FOR CUTTING BRICKS
The Faithfull flooring chisels are designed for cutting the tongue in laid tongued and grooved floorboarding in order to remove part of the board. They have a hardened and tempered cutting edge. NOT TO BE USED FOR CUTTING BRICKSThe Faithfull FAIEC214 Flooring chisel has the following dimensions:Size: 230 x 57mm (9 x 2.1/4 inch).
This Faithfull Spare Blade is manufactured from stainless steel, which is tough, durable and resistant to corrosion. Designed to suit floor scrapers.To suit FAIFSHD16 Blade size 400mm (16 in)
This Faithfull Spare Blade is manufactured from stainless steel, which is tough, durable and resistant to corrosion. Designed to suit floor scrapers.To suit FAIFSHD12Blade size 300mm (12in)
This Faithfull Spare Blade is manufactured from stainless steel, which is tough, durable and resistant to corrosion. Designed to suit floor scrapers.Blade size 200 x 57mm (8 x 2 1/4 in) 5 hole old type
The Faithfull Pick Axe has a high quality solid eye navy pick head with chisel and point for the breaking of concrete. This tool is virtually unbreakable and incorporates a soft-grip, non-slip fibreglass handle.
The Faithfull combined feather edge and straight edge is made from extruded mill finished aluminium which is exceptionally light and manoeuvrable. Manufactured with one edge tapered and one flat edge. It can also be used as a straight edge for ruling and cutting. The models featuring the scale along the length are graduated in metric at 5 mm intervals and numbered every 50 mm. The ‘FE6FE’ has one edge sharply tapered and one flat edge.This models features a metric scale along the length graduated at 5mm intervals and numbered every 50 mm.Length: 2000mm (6 ft 6 in)Section: 93 x 25mm (3 5/8 x 1 in)
The Faithfull combined feather edge and straight edge is made from extruded mill finished aluminium which is exceptionally light and manoeuvrable. Manufactured with one edge tapered and one flat edge. It can also be used as a straight edge for ruling and cutting. The models featuring the scale along the length are graduated in metric at 5 mm intervals and numbered every 50 mm. The ‘FE6FE’ has one edge sharply tapered and one flat edge.This models features a metric scale along the length graduated at 5mm intervals and numbered every 50 mm. Size 1800mm (6 ft)Section: 93 x 25mm (3 5/8 x 1 in)
The Faithfull FAIPROEXTB9 pair of spare bolts are used as part of an external building profile. They are made from galvanised steel and are 230mm (9in) in size.
The Faithfull FAIPROEXTB18 pair of spare bolts are used as part of an external building profile. They are made from galvanised steel and 460mm (18in) in size.
This Faithfull Earth Rammer has a 125mm² (5in²) square head and is attached to a wooden handle. Used for compacting areas of tarmac or asphalt, or for tamping down backfill during the erection of fence posts.
The Faithfull drywall taping knives are used for spreading jointing compound and when applying paper or fibreglass drywall tape, to cover joints in plasterboard. The knives feature a soft grip handle with a thumb rest and a flexible Blue Steel tapered shaped blade to assist when running in corners. Other common uses include applying covering over nail and screw indents, patching holes, and smoothing wall-coverings. Available in two widths of 200 or 300mm.The Faithfull DWTAPE200 is 200mm wide
Faithfull forged steel heavy-duty insulated drainage shovel for working on or near live cable. Featuring a solid forged steel head and a ‘YD’ handle. The insulated shaft has a solid fibreglass core and an abrasive resistant orange polymer coating. • ALL NOW WITH NEW IMPROVED WIDER HANDLE GRIPS• INDIVIDUALLY TESTED TO 10,000 VOLTS, AND GUARANTEED TO 1,000 VOLTS• CONFORMS TO: BS8020:2002• INTEGRATED SAFETY HAND STOP
The Faithfull Digging Bar is manufactured from high-grade heat-treated steel bar, digging bars have a hexagonal profile shank with a pencil point at one end, and a 50mm (2in) flat chisel edge at the other. Used for breaking rock or concrete and for levering heavy objects.1 x Faithfull Digging Bar 6.4kg 25mm x 1.5m
