The Vaughan B215H This hook bar has a reverse hook to provide excellent leverage and travel capacity. Forged from spring tempered steel, making it ideal for heavy-duty use. With 3 bevelled nail slots and polished, sharp blades for easy insertion. Made in the USA.
The Vaughan Mini Bar is an indispensable tool for prying, pulling and scraping. With a 'Shepherd's Crook' rocker head for maximum prying power and 3 bevelled nail slots. Ideal for opening paint tins and small leverage jobs. Made in the USA.
The Bessey AV2 Spacer is designed for laying parquet, laminated and panel flooring without any wedges. Spacer for floating laminate and parquet flooring installations.Wide contact and support area for avoiding pressure points on thefloorboards and plaster.Easy to remove by simply turning back.Very light and compact. Features: 1 Clever dial Set up is fast and simple. Inserted between the wall and the first row of flooring, the distance to the wall can be set simply by turning the red dial. When the installation work is finished, the spacer is easy to remove; just rotate the dial to release the pressure.2 Wide contact and support surface - Simply put, the pressure points on the wall and the flooring are avoided. There is no danger of the aid slipping or tilting – as can happen with wedges or blocks – when working with the BESSEY spacer.3 Exact millimetre scale. Wall surface irregularities of 5 to 20 mm can be compensated for easily. The exact distance required for spacing can be readily seen on the millimetre scale.4 'Robust' in the size of a business card. Manufactured from impact and break resistant, glass fibre reinforced polyamide, the spacer is light and tough and should last for years. Spacer AV2. Each pack contains 4 spacers.
The Faithfull Asphalt Rake has an all steel construction with 16 flat teeth and a long tubular steel handle. Used for spreading and raking asphalt evenly.
Faithfull replacement ash handles to suit spades, forks and shovels. These handles are made to BS3823 BW/BR, which controls the density moisture content, grain twist and finish of the timber. Size: 710mm (28in).Type Bent taperedHilt Metal YD
Faithfull replacement ash handles to suit spades, forks and shovels. These handles are made to BS3823 BW/BR, which controls the density moisture content, grain twist and finish of the timber. Size: 710mm (28in).Type Bent taperedHilt Plastic YD
The Faithfull FAIAST2MYDT has a taper mouth treaded with MYD type hilt shovel made from manganese steel for strength. A tubular shaft is welded to the socket for a strong smooth join. The shaft is fitted with an Metal YD handle with a wooden cross dowel for added comfort. The shovel has a new improved heavy-duty treaded blade which is comfortable on the foot, protects footwear and prevents slipping. The solid forged blade and socket is correctly tempered for strength and epoxy coated for rust prevention. Size: No.2.Blade: 300 x 240-215mm (12 x 9.1/2 - 8.1/2in). Shaft size: 700mm (28in).
The Faithfull all steel taper mouth shovel. Solid manganese steel forged blade and socket correctly tempered for strength. Powder coated for rust prevention. A tubular shaft is welded to the socket for a strong smooth join. The shaft is fitted with a metal YD hilt with a wooden cross dowel for added comfort. Specification: Size: No.2Blade: 300 x 240-215mm (12 x 9.1/2-8.1/2in)Shaft: 700mm (28in)
The Faithfull FAIASRS all-steel rabbiting spade (1.67m handle) is made from carbon manganese steel for added strength. The tubular steel shaft is welded to the socket to create a strong joint. The long handle makes this tool ideal for digging deep narrow trenches, land drains and post holes. The shovel features high quality welds, with no open points to allow water to enter causing internal rust and a solid forged blade correctly tempered for a long working life. Blade: 400 x 150 - 90mm (16 x 6-3.1/2in).Shaft: 1.67m (66in).
The Faithfull Draining Shovel with a carbon manganese steel head with tubular steel shaft. Used for creating drainage channels, preparing trenches for drainage pipes and for making straight sided holes for fence posts. Blade: 380 x 150-90mm (15 x 6-3.1/2in).Shaft: 700mm (28in).
The Faithfull contractors fork made from carbon manganese steel for strength and epoxy coated for rust protection. A tubular shaft is welded to the socket for a strong smooth join and the solid forged square prongs are correctly tempered for strength. The shaft is fitted with metal YD hilt with a wooden cross dowel for added comfort. Shaft Size. 700mm (28 in).
The Faithfull Tapered Fencing Spade is made from carbon manganese steel for added strength. The tubular steel shaft is welded to the socket to create a strong joint. The long handle makes it ideal for digging postholes. The shovel features high quality welds, with no open points to allow water to enter causing internal rust and a solid forged blade correctly tempered for a long working life.
The Faithfull Adjustable Support Props are designed for use as an extra pair of hands when supporting ceiling boards and sheet materials during overhead fixing. They are adjustable to working heights ranging from 1.6m (63in) to 2.9m (114in). The feet at both ends swivel to accommodate sloping or uneven surfaces and improve grip. PLEASE NOTE that these props are for lightweight temporary support only and MUST NOT be confused with heavyweight equivalents which are designed to support heavy loads over extended periods. Maximum working load 60Kg (132lb) Vertical Maximum working load 20Kg (44lb) at 45deg Supplied with sturdy carry bag
Designed for clearing out mortar from between brickwork prior to pointing. The strong aluminium handle is contoured to fit the hand and squared off at the end. With 2 large hard-wearing wheels and replaceable point. Size: 8.1/2in x 3in
Two tools in one. A double ended scaffold spanner with swingover handle, hardened sockets and a bright zinc plate finish. Suitable for use with all popular scaffold fittings used within the U.K. Double ended with hex whitworth sockets, 7/16in and 1/2in.
Footprint Brick Bolsters have a fully drop forged design for cutting bricks and other general building uses. Hardened and tempered blade to provide a long lasting, accurately ground cutting edge. The handle blade and head are drop forged as a whole for increased strength and durability. The domed head design prevents splintering from continued striking with a hammer. Manufactured to BS3066. Made in the UK.1 x Footprint 11220 Brick Bolster 100mm (4in)
Footprint Brick Bolsters have a fully drop forged design for cutting bricks and other general building uses. Hardened and tempered blade to provide a long lasting, accurately ground cutting edge. The handle blade and head are drop forged as a whole for increased strength and durability. The domed head design prevents splintering from continued striking with a hammer. Manufactured to BS3066. Made in the UK.The Footprint 1236 Brick Bolster has additional ribs spreading down the sides and the centre of the blade for added strength and a longer life. Width: 114mm (4.1/2in).
The Hultafors 109 TD Wrecking Bar is made from hardened, high quality steel. Wide, ground contact surfaces and thin ends make it easy to use in narrow spaces and reduce the risk of leaving marks. The claw and chisel are optimised for pulling out nails.
The Bessey SVH400 is ideal for floor coverings such as wood and cork parquet, laminated and panel flooring, which are stylish and fashionable. BESSEY has developed a range of specialist clamping tools that make the laying of these sought after floor coverings easier and more efficient. For laying parquet, laminated and panel flooring. Length: 4.0mBand size: 25mm x 1mmJaw Width : 120mm
Faithfull plastic brick hod which is virtually unbreakable made from polyethylene which is extremely hardwearing. Reinforced ribbed sides and socket for replaceable handle (sold separately). Size: 420 x 220 x 220mm (17 x 9 x 9in). Handles suitable: HWHH (1070mm/42in), HWHH48 (1220mm/48in).
Roughneck Cold Chisel made from drop-forged steel, heat-treated and tempered. They have a black powder-coated finish.The Roughneck ROU31983 Cold Chisel 457 x 25mm (18 inch x 1 inch) 19mm Shank
The Roughneck Knocking Block is made from strong nylon and is used for knocking laminate and timber flooring together to ensure a perfect fit. Heavy-duty with a large handle. Large size ensures even pushing and will not damage the wood panels being fitted. Size: ;55 x 480mm.
