Faithfull Cold chisels are made from high-quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges. For cutting brick, concrete and paving slabs . The cutting edge has an angle of approximately 60°.Size: 300 x 20mm (12 x 3/4 in).
Wrecking bars are an essential tool for all builders, carpenters and plumbers and widely used in factories, warehouses and the farming industry. Manufactured from octagonal steel cross section with hardened and tempered chisel and claw ends, which ensure maximum strength and durability. For opening packing cases, pulling out nails, levering off shuttering etc.Size: 600 x 19mm (24 x 3/4 in).
Scutch combs are designed to fit into a scutch comb holder when preparing stone and masonry etc. The size of the scutch comb must be the same width as the comb holder being used. These Roughneck Scutch Combs are made from strong carbon steel, which is zinc coated for increased resistance to corrosion. They are contractor grade and come with a lifetime guarantee. Size: 25mm (1 inch).Pack of 5
The Faithfull All-steel Square Mouth Shovel. Solid manganese steel forged blade and socket correctly tempered for strength. Powder coated for rust prevention. A tubular shaft is welded to the socket for a strong smooth join. The shaft is fitted with a metal YD hilt with a wooden cross dowel for added comfort.Exceeds BS standard by at least 50%. Size: No.2.Blade: 300 x 250mm (12 x 10in).Shaft: 700mm (28in).
The Faithfull flooring chisels are designed for cutting the tongue in laid tongued and grooved floorboarding in order to remove part of the board. They have a hardened and tempered cutting edge. NOT TO BE USED FOR CUTTING BRICKSThe Faithfull FAIEC214PG Flooring chisel is fitted with a sturdy rubber safety grip and has the following dimensions:Size: 230 x 57mm (9 x 2.1/4 inch). NOT TO BE USED FOR CUTTING BRICKS
The Roughneck Roofing Demolition & Lifting Bar is ideal when working overhead, such as taking down ceilings, ripping off roof laths and working in confined spaces. The tusks are hardened and tempered and the heel rounded to distribute pressure over a larger area. The side by side chisel ends can be rested on joists for added leverage when removing roof lathes, taking down ceilings and general demolition work. Saves time, energy and increases safety reducing the chance of injury.
These Roughneck Gorilla Bars have a low profile claw that fits further under the workpiece for increased prying power, and the wider claw surface offers better control and resists sinking into the support surface. Made from drop forged alloy steel hardened and tempered, and with polished tips and oval shaped for better control and strength.1 x Roughneck Gorilla Bar Junior 356mm (14in)
Faithfull Square mouthed open socket shovel pressed from high-quality manganese steel and fitted with a 700mm (28in) FSC European Ash shaft fitted with a T hilt. The socket is polished for comfort in use. Weatherproofed handle.Shaft: 700mm (28in).Size No 2Blade: 300 x 250mm (12 x 10in)
The Faithfull Mixing Paddles fitted with M14 spindle threads. Designed for use with professional mixing machines of 850 watts or more. Great for mixing adhesives, Artex, screed, mortar, plaster, paste, paint and over heavy mixture materials.MP160M14 M14 Mixing Paddle. Size: 160 x 610mm.
Faithfull Cold chisels are made from high-quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges. For cutting brick, concrete and paving slabs . The cutting edge has an angle of approximately 60°.Size: 450 x 20mm (18 x 3/4 in).
The Faithfull FAIAST2MYDT has a taper mouth treaded with MYD type hilt shovel made from manganese steel for strength. A tubular shaft is welded to the socket for a strong smooth join. The shaft is fitted with an Metal YD handle with a wooden cross dowel for added comfort. The shovel has a new improved heavy-duty treaded blade which is comfortable on the foot, protects footwear and prevents slipping. The solid forged blade and socket is correctly tempered for strength and epoxy coated for rust prevention. Size: No.2.Blade: 300 x 240-215mm (12 x 9.1/2 - 8.1/2in). Shaft size: 700mm (28in).
The Faithfull All-Steel Square Mouth Treaded Shovel made from manganese steel for strength, and fitted with a MYD type hilt with a wooden cross dowel for added comfort. The improved heavy-duty solid forged blade and socket is powder coated for rust prevention and is correctly tempered for strength. The treaded blade is comfortable on the foot and protects footwear from slipping off the blade.Exceeds BS standard by at least 50%. Size: No.2.Size: 300 x 250mm (12 x 10in).Shaft: 700mm (28in).
The Roughneck Gorilla Brick Bolster is manufactured from drop-forged and heat-treated superior quality chrome vanadium steel to ensure outstanding toughness and long-life performance. The 45 degree single chamfer cutting edge offers the optimal balance between cutting performance and longevity. Equipped with a patented non-slip guard that securely locks onto the shaft. Eliminates the age-old problem of grips slipping up the shaft during impact. Additionally, the guard can be removed within seconds to improve access in tight areas or to aid flush cutting.1 x Roughneck Gorilla Brick Bolster with Non-Slip Hand Guard 76 x 279mm (3 x 11in)
Mixing paddles have a robust construction for heavy-duty work. They are great for mixing plaster, render, paint, adhesives, mortar, paste and screed. Use with 13mm (1/2 inch) capacity chuck power drills of at least 600 watt.Size: 400 mm x 80mm.For 5-10Kg.
These Faithfull chisels are suited to cutting bricks during building work. This chisel has a suitably hardened cutting edge, but should not be used on concrete containing reinforcing bars.Size: 75 x 225mm (3in x 9in).
The Faithfull Utility Bar is manufactured from high quality alloy steel and is powder coated to ensure maximum resistance to rusting. The flat bar with bevelled ends is designed for such tasks as opening boxes, crates and manhole covers. It is ideal for removing nails and prying lightweight doors and windows, as well as a multitude of other light levering applications. Makes a useful addition to the tool kits of most professionals and home handymen. This versatile tool enables a wide range of light duty work to be performed in and around the workplace or home.
A tough reusable waterproof cover with a laminate woven polyethylene construction and heat sealed, poly rope reinforced hem. The tarpaulin's is highly durable, tear, stretch and UV resistant, with rust resistant metal eyelets. The Tarpaulin can be used in the following areas:BUILDING SITES: protects lumber, aggregates & machineryFARMS: protects grain, animal feed & machineryHOME: covers boats, trailers, swimming pools, garden furniture & BBQsLEISURE: ground sheet, seating shelter, picnic & beach mat, windbreak The Twin colour is reversible between silver and green. TARP129 and TARP1812 weight 80 grams per square metreTARP1818H weight 140 grams per square metreThe Faithfull FAITARP1812 Tarpaulin's Green / Silver has the following dimensions:-5480 x 3650mm (18 x 12 ft)
The Bessey Telescopic Drywall Support has an extremely stable construction, thanks to its highly durable steel pipes and non-slip PVC contact surfaces (9 x 7cm). Each support can hold up to 350kg (max.) when fully retracted. A quick-slide button allows for rapid extension and retraction of the telescopic bar. The 2-component plastic handle with pump mechanism enables single-handed operation. Holding force can be controlled by turning the support on the grip. Continuously swivelling contact surfaces, -45 to +45, enable use on slopes. GS-certified for quality and safety.1 x Bessey Telescopic Drywall Support 575-910mm.
The Roughneck Gorilla Utility Bar™ is made from hardened and tempered alloy steel with an ‘I’ section profile which offers much greater strength than traditional flat bars. It incorporates a flat anvil on the neck for striking, 3 integral nail pullers and polished tips. Size: 375mm (15in).
This Faithfull Earth Rammer has a 125mm² (5in²) square head and is attached to a tubular steel handle with a soft grip sleeve. Used for compacting areas of tarmac or asphalt, or for tamping down backfill during the erection of fence posts.
The Big Mutt Pro Scraper has a heat treated roll forged steel blade with bevelled cutting edge for durability and clean cutting. The blade can be resharpened to maintain the cutting edge and has a polished tip for easy cleaningThe tubular steel handle has a polyethylene coating and comfort gripHandle: 1380mm (54 in)Blade: 228 x 178mm (9 x 7in)
The Purdy® Premium Flex Joint Knife is made from the highest quality raw materials to make prep work quick and easy. Fitted with a stainless steel blade, nail set hammerhead and non-slip handle for increased comfort. Available in a range of sizes to cater for any type of project and are designed to stand up to the toughest of jobs.1 x Purdy® Premium Flex Joint Knife 100mm (4in)
Roughneck Mutt Pro Multi scraper has a heat treated roll forged steel blade with bevelled cutting edge for durability and clean cutting, and it can be re- sharpened to maintain a cutting edge. It also has a polished blade tip for easy cleaning. Tubular steel handle: 940mm (36in) with polyethylene coating and D grip.Blade: 100 x 200mm (4 x 8in).
This Footprint Cold Chisel is ideal for use on stone, masonry, brick work and other similar materials. It has a heavy-duty design and is made from a fully drop forged single piece of Carbon Steel. The cutting edge is hardened and ground for a longer life, and the domed anti-mushroom head prevents splintering. Made in Sheffield, Britain.1 x Footprint Cold Chisel 250 x 25mm
Roughneck Cold Chisel made from drop-forged steel, heat-treated and tempered. They have a black powder-coated finish.The Roughneck ROU31981 Cold Chisel 305 x 25mm (12in x 1.in) 19mm Shank
Footprint Brick Bolsters have a fully drop forged design for cutting bricks and other general building uses. Hardened and tempered blade to provide a long lasting, accurately ground cutting edge. The handle blade and head are drop forged as a whole for increased strength and durability. The domed head design prevents splintering from continued striking with a hammer. Manufactured to BS3066. Made in the UK.1 x Footprint 11220 Brick Bolster 100mm (4in)
The Hultafors A 1500 SK Aluminium Demolition Pry Bar combines the best features of both a pry bar and a wrecking bar. Its claw with a nail puller makes it an excellent alternative to a wrecking bar. The claw is made from hardened boron steel, broad and robust but still thin enough to provide the best possible access. The long handle provides more power and makes it easier to work with a more ergonomic posture compared to working with a shorter wrecking bar. Made of hollow, specially alloyed aluminium making it light weight and strong at the same time. This low weight compared to steel pry bars and Burke bars makes it more gentle on the body, which is especially important when working above shoulder height.
Hand Scarifier for the preparation of drywall surfaces to help keying of plaster. The tines are heat-treated and they come with a plastic handle.Size 200mm (8 in)
These Roughneck Gorilla Bars have a low profile claw that fits further under the workpiece for increased prying power, and the wider claw surface offers better control and resists sinking into the support surface. Made from drop forged alloy steel hardened and tempered, and with polished tips and oval shaped for better control and strength.The Gorilla Bar Tripple Pack contains the following: 1 x Gorilla Bar Junior 350mm (14in).1 x Gorilla Bar 600mm (24in).1 x Gorilla Bar 900mm (36in).
This Facom 5 piece Punch Set comprises the following sizes: 3mm, 4mm, 5mm, 6mm, 8mm. These precision punches are differentially hardened and have tri-material, shock-absorbing handles. They have long shanks that are hardened to 58HRc and the heads are hardened to 43HRc.
A tough reusable waterproof cover with a laminate woven polyethylene construction and heat sealed, poly rope reinforced hem. The tarpaulin's is highly durable, tear, stretch and UV resistant, with rust resistant metal eyelets. The Tarpaulin can be used in the following areas:BUILDING SITES: protects lumber, aggregates & machineryFARMS: protects grain, animal feed & machineryHOME: covers boats, trailers, swimming pools, garden furniture & BBQsLEISURE: ground sheet, seating shelter, picnic & beach mat, windbreak The Twin colour is reversible between silver and green. TARP129 and TARP1812 weight 80 grams per square metreTARP1818H weight 140 grams per square metreThe Faithfull FAITARP1818H heavy-duty tarpaulin (eye) has the following dimensions:Size: 5480 x 5480mm (18 x 18 ft)
Can be used as a wrecking bar, nail puller and utility or ripping bar. The low profile wide, flattened claw fits further under the workpiece for increased prying power and it resists sinking into the support surface. Forged from high quality carbon steel.1 x Faithfull Tuff Bar 450mm (18in)
These Roughneck Gorilla Bars have a low profile claw that fits further under the workpiece for increased prying power, and the wider claw surface offers better control and resists sinking into the support surface. Made from drop forged alloy steel hardened and tempered, and with polished tips and oval shaped for better control and strength.1 x Roughneck Gorilla Bar 900mm (36in)
Faithfull Cold chisels are made from high-quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges. For cutting brick, concrete and paving slabs . The cutting edge has an angle of approximately 60°.Size: 200 x 20mm (8 x 3/4 in).
