The Footprint Grooved Plugging Chisel is used to remove the mortar and cement from between brick and block work. Made from a single, fully forged piece of carbon steel that has been harden and tempered for increased strength and durability. The cutting edge is wider than the blade with a centre groove for rapid debris removal. The domed head design prevents splintering from continued striking with a hammer. Made in Sheffield, Britain. Blade Width: 16mm.Chisel Length: 265mm.1 x Footprint 1860 Grooved Plugging Chisel
External corner profiles provide the answer to fast and accurate bricklaying by removing the need to raise corners first. Brick profiles may be used after three courses of bricks have been laid and allowed to set overnight. Once the profiles have been attached to the brickwork and set up, they provide an accurate and firm corner post from which a building line may be run. Building profiles are easy to set up, simple to use and are supplied complete with all the fitments needed to help you lay bricks quickly and accurately. The profile's design also allows easy access to the brickwork for pointing and rubbing in to be completed as work progresses for greater productivity. The galvanised steel construction is simple to set up and remove and can be adjusted using wing nuts. The Faithfull FAIPROEXT profile pack comes complete with all fittings and full instructions including:2 x External steel profiles2 x 225mm (9in) retaining bolts2 x 350mm (14in) retaining bolts2 x 450mm (18in) retaining bolts4 x Clamping brackets2 x Line holders1 x Setting device2 x Stabilisers4 x Wing nuts
The Bulldog Insulated Treaded Digging Spade is the perfect tool for any contractor in need of a reliable and heavy-duty spade. Forged from one piece of steel with an epoxy paint coating to provide optimum protection against corrosive substances. The round corner blades reduce penetration damage to underground pipes and cables. The treads on this spade enables more force to be used, and it also acts as boot protection. Fitted with a one piece, heavy-duty fibreglass YD handle. Manufactured to BS8020. Individually tested to 10,000 volts, guaranteed to 1,000 volts, and supplied with a Certificate of Conformity.
The Roughneck Heavy-Duty Post Rammer is ideal for driving fencing posts into heavy ground. The heavy gauge tubular steel body accommodates posts up to 150mm (6in) in diameter. It features a heavyweight solid steel striking plate welded to both body and handles for safe and secure use.
The Roughneck Railroad Pick Axe has a head made from roll forged alloy steel. That has hardened and tempered with a black painted finish. The ends are chisel and point. The fibreglass handle has a solid core and polypropylene cover. Supplied in a handy carry box.1 x Roughneck Fibreglass Handle Railroad Pick Axe 2.3kg (5lb)
Roughneck Heavy-Duty Posthole Digger designed for digging fencing postholes, it cuts a cleaner hole and removes soil easier and quicker than using a spade. It has a large heavy-duty industrial grade steel head, heavy-duty tubular arms which are hinged for increased leverage and high grip PVC handles. Simply works by pulling the handles apart to open the jaws and drive into the ground to create a hole and then push them together to close the jaws and scoop out the earth.
The Roughneck Cutter Mattock has a head made from roll forged alloy steel, hardened and tempered and with a black painted finish. It has a horizontal mattock edge at one end and a vertical one at the other. Ideal for cutting roots and breaking up soil. The fibreglass handle has a solid core and polypropylene cover. Supplied in a handy carry box.
These Roughneck Digging Bars have a drop-forged steel construction with heat-treated working areas, and a black finish with polished tips. They have a chisel blade for general prying and breaking, and a pointed tip for breaking stone and concrete.1 x Roughneck Digging Bar 6.4kg 25mm x 150cm
Flex Tubs are ideal for use around the garden, home, on the building site, farm or stables. This lightweight, heavy-duty polyethylene, flexible tub features super-strong comfortable handles and is ideal for solids and fluids.Environmentally friendly Flex Tubs are manufactured from 100% recyclable material.Colour: BlackSize: 60 Litre (13 gal)
The adjustable podger spanner offers a full range of sizes up to 35mm. Manufactured from quality steel with a hard-wearing black finish. Long body/handle which can be used for lining up of holes. Overall Length: 404mm.
Vaughan Bear Claw Scraper Bars are made in the USA using high carbon steel, meaning they will stand up to heavy use on the job site. They feature a Japanese style nail puller 'Bear-Claw' at one end which will dig under recessed nails and which has a smooth rocker head to prevent damage to the wood. The other end has a wide, sharp scraper end, which is ideal for getting behind mouldings, skirting, tiles etc. It has a double bevelled nail slot and hand-sharpened face for improved scraping or prying uses. Made in the USA.1 x Vaughan Bear Claw Scraper & Pry Bar 200mm (8in)
The Vaughan Japanese style bear claw nail puller, forged from tempered steel. With a flat claw which slips easily under nail heads, causing minimal damage to wood surfaces. Its rocker head provides excellent leverage. Blue rust resistant finish. Made in the USA.1 x Vaughan BC12 Bear Claw Nail Puller 300mm (11.3/4in)
The Vaughan Japanese style bear claw nail puller, forged from tempered steel. With a flat claw which slips easily under nail heads, causing minimal damage to wood surfaces. Its rocker head provides excellent leverage. Blue rust resistant finish. Made in the USA.1 x Vaughan BC10 Bear Claw Nail Puller 265mm (10.1/2in)
These Faithfull Scutch combs fit into a scutch comb holder when preparing stone and masonry etc. The size of the scutch comb must be the same width as the comb holder being used. All Faithfull scutch combs are manufactured from high-quality chrome vanadium steel. Can also be used in scutch hammers.The Faithfull FAISC1N Scutch combs come in a pack of 5 and have the following dimensions:Size: 25mm (1 inch).
This RST Drywall Putty Knife is a drywall lining tool. It has a comfortable soft touch handle which provides excellent grip.Flexible blade. Size: 3.2cm (1.1/4 inch).
This Faithfull Professional Slate Cutter is a convenient, hand operated plier type slate cutter with a hardened steel blade,. It is suitable for cutting and trimming natural slate and fibre cement shingles to the correct size. The cutter has a 35mm single stroke cutting capacity that will cut slate up to 3mm thick. It also features an integral nail punch that can be used to produce fixing holes of 3.2mm diameter up to 60mm from the edge the tile. The added convenience of a quick cutting action is assured by a spring loaded return action, along with soft grip handles to provide the user with extra comfort during prolonged periods of use. For safe storage, the cutter can be locked in the closed position using the convenient safety catch. This slate cutter is ideal for cutting and nibbling slates for fine fits in awkward positions, up on the roof where manoeuvring a full size slate cutter would be difficult, easily carried in a nail pouch. Maximum cutting length: 35mm per single cut.Cutting width: 3mm, 3.2mm hole punch.Overall length: 300mm (12in).
Roughneck 3 Piece Chisel and Bolster Set made from drop-forged steel, heat-treated and tempered. Each piece has a black powder-coated finish and a dual-component soft grip with safety guard. Set contains: 1 x Cold Chisel 25 x 254mm (1 x 10in)1 x Brick Bolster 70 x 216mm (2.3/4 x 8.1/2in)1 x Electrician's Bolster 76 x 254mm (3 x 10in)
The Roughneck Tarmac Rake has an all steel construction with 16 welded round teeth. Its long tubular steel handle is fitted with a soft grip for increased comfort during prolonged use.
The Roughneck Asphalt Rake has an all steel construction with 16 forged flat teeth. Its long tubular steel handle is fitted with a soft-grip for increased comfort during prolonged use.
