For trimming roof slates to size. The slate cutting axe blade incorporates a spike for creating nail holes, and the handle is covered with a rubber grip for comfort. Available in R/H or L/H styles.The handle is offset for left hand use.
The Faithfull solid socket cable laying shovel has a solid forged head and is ideal for narrow trench work, similar to pipe and cable laying. Fitted with an ash shaft with an MYD hilt. Blade: 280 x 140-120mm (11 x 5.1/2- 4.3/4in).Shaft: 700mm (28in).
A heavy-duty, All-steel Square Mouth Contractor's Shovel. Solid forged blade and socket correctly tempered for strength. It has a metal YD handle with wooden cross piece. Size: No.2. Blade: 310 x 250mm (12 x 10in).
10 x 1m cable accessory kit which is ideal for gaining access to wire and cable under floorboards, in ceiling ducts and in wall cavities.Contents:10 x 1m reinforced polyester rods.Flexy extender.Ring end for pushing.Hook end for pulling.
The Roughneck Fencing Pins have a top hook for securing rope or hazard tape when marking off areas where work is in progress or where general access is restricted. They are fully painted black to protect against rust. The tips are hardened for use in hard ground.10 x Roughneck Fencing Pins 12mm x 1200mm
Faithfull Cold chisels are made from high-quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges. For cutting brick, concrete and paving slabs . The cutting edge has an angle of approximately 60°.Size: 150 x 6mm (6 x 1/4 in).
Faithfull Cold chisels are made from high-quality grade steel which is hardened and ground to maximise safety and to ensure longer lasting cutting edges. For cutting brick, concrete and paving slabs . The cutting edge has an angle of approximately 60°.Size: 150 x 13mm (6 x 1/2 in).
These Faithfull Scutch combs fit into a scutch comb holder when preparing stone and masonry etc. The size of the scutch comb must be the same width as the comb holder being used. All Faithfull scutch combs are manufactured from high-quality chrome vanadium steel. Can also be used in scutch hammers.The Faithfull FAISC112N Scutch combs come in a pack of 5 and have the following dimensions:Size: 38mm (1 1/2 inch).
This Combination Podger Scaffold Spanner has a hardened and tempered handle which has a tapered square end suitable for use on scaffold eye bolts and hex whitworth sockets.Length: 250mm.Size 7/16 in Whitworth.
The Faithfull Posthole Auger provides an easy non-mechanical means of creating holes when erecting fencing posts. When rotated in a clockwise direction the 150mm diameter thread bores a hole into the soil or clay, with an optional hole depth to suit the length of the post to be secured.
The Faithfull Floor Scraper is used for removing grease and dirt from workshop floors, preparation areas and shopping arcades etc. The steel blade is designed not to damage tiled flooring or laminates and is fitted with fibreglass handles for strength and easy sterilisation.Fibreglass handle: 1450 x 25mm (57 x 1 in) Blade size: 200mm (8in)
Faithfull heavy-duty crowbars, manufactured from high-grade heat-treated steel bar. Ideal for levering heavy objects, wrecking work and digging, the pinch point end allows easy penetration when breaking hard ground.1 x Faithfull Chisel & Point Crowbar 25mm x 1.2m
This Faithfull Paint Mixing Paddle has a 8mm hexagon shank for use in power drills of at least 400 watt and above. It is perfectly balanced and is quiet in operation. Mixes between 1-5 litres of paint. The overall length of 400mm with a 60mm diameter paddle allow access to most modern paint containers. Length: 400mm. Diameter: 60mm.
The Faithfull Adjustable Support Props are designed for use as an extra pair of hands when supporting ceiling boards and sheet materials during overhead fixing. They are adjustable to working heights ranging from 1.6m (63in) to 2.9m (114in). The feet at both ends swivel to accommodate sloping or uneven surfaces and improve grip. PLEASE NOTE that these props are for lightweight temporary support only and MUST NOT be confused with heavyweight equivalents which are designed to support heavy loads over extended periods. Maximum working load 60Kg (132lb) Vertical Maximum working load 20Kg (44lb) at 45deg Supplied with sturdy carry bag
The Promatic Handle is made from a plastic composite reinforced with 30% glass for maximum durability. Piezo igniton with instant trigger on/off function. It has a bayonet fitting for burners and swivelling hose connections to avoid hose drag. It also has a combined suspension hook and foot stand, and valve for precise flame setting. Delivered without hose nipple. Hose connection 3/8 BSP LH. Working pressure, bar 1.5 to 4 bar. Weight: 290g.Length: 180mm.Height: 80mm.
The Faithfull Tough-Tarp Tarpaulin is 100% waterproof, frost and UV resistant. Integrally bonded with water repellent and UV resistant materials (not sprayed on as a secondary treatment), and manufactured with polyethylene film, using patented multi-layered, cross-laminated production technology. Puncture and tear resistant, in the unlikely case of damage, it will remain localised and not spread across the tarpaulin, making any damage easy to repair without needing to replace the tarpaulin.Made to withstand temperatures between -60 to & 60 degrees, the material will not crack or flake even at such extremes. Plus, the benefit of zero-fade technology ensures these tarpaulins stay functional and looking good for longer. Featuring ultrasonically welded eyelets, which are reinforced by rust resistant aluminium inserts and heat-sealed hems, ensuring the eyelets remain in place - even when placed under the highest pressure/tension.The lightest and strongest tarpaulins available in our range and backed by a five year guarantee, however these have been proven to last much longer. They will outlast normal, woven tarpaulins, by up to 3 times. Tested and fully REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) compliant, plus they’re 100% recyclable.The Faithfull Tough-Tarp Tarpaulin, in White, is 6 x 4m in dimension. is 100% waterproof, frost and UV resistant. The tarpaulin is integrally bonded with water repellent and UV resistant materials (not sprayed on as a secondary treatment), and manufactured with polyethylene film, using patented multi-layered, cross-laminated production technology.Puncture and tear resistant, in the unlikely case of damage, it will remain localised and not spread across the tarpaulin, making any damage easy to repair without needing to replace the tarpaulin.Made to withstand temperatures between -60 to & 60 degrees, the material will not crack or flake even at such extremes. Plus, the benefit of zero-fade technology ensures these tarpaulins stay functional and looking good for longer.Featuring ultrasonically welded eyelets, which are reinforced by rust resistant aluminium inserts and heat-sealed hems, ensuring the eyelets remain in place - even when placed under the highest pressure/tension. Tested and fully REACH (Registration, Evaluation, Authorisation and Restriction of Chemicals) compliant, plus they’re 100% recyclable. Specifications: Size: 6 x 4m.Colour: White.
Heavy section aluminium darbies are used for preparatory surface finishing of walls. They have a 16mm lipped edge and a rigid back support. With adjustable handles for enhanced user comfort and control.Length: 1200mm (4 ft)Section: 120 x 16 mm (4 3/4 x 5/8 in) Lip.
These Faithfull Scutch combs fit into a scutch comb holder when preparing stone and masonry etc. The size of the scutch comb must be the same width as the comb holder being used. All Faithfull scutch combs are manufactured from high-quality chrome vanadium steel. Can also be used in scutch hammers.The Faithfull FAISC1N Scutch combs come in a pack of 5 and have the following dimensions:Size: 25mm (1 inch).
Flex Tubs are ideal for use around the garden, home, on the building site, farm or stables. This lightweight, heavy-duty polyethylene, flexible tub features super-strong comfortable handles and is ideal for solids and fluids.Environmentally friendly Flex Tubs are manufactured from 100% recyclable material.Colour: BlackSize: 28 Litre (6 gal)
The Faithfull Tapered Fencing Spade is made from carbon manganese steel for added strength. The tubular steel shaft is welded to the socket to create a strong joint. The long handle makes it ideal for digging postholes. The shovel features high quality welds, with no open points to allow water to enter causing internal rust and a solid forged blade correctly tempered for a long working life.
Designed for clearing out mortar from between brickwork prior to pointing. The strong aluminium handle is contoured to fit the hand and squared off at the end. With 2 large hard-wearing wheels and replaceable point. Size: 8.1/2in x 3in
The Faithfull is a professional quality plasterers tape for covering plasterboard joints and repairing cracks prior to plastering. Length: 90 metres (295ft).Width: 50mm (2in).
This Hultafors B 1500 Aluminium Pry Bar 1500mm 2.8kg is lighter and easier to work with, especially when working at shoulder height. Used for applications such as prizing items onto truck platforms and ripping up formwork. An aluminium tool does not rust, has better resistance to cold and is also more flexible than steel tools. It can be bent about three times as much as a steel tool without being deformed.
The Hultafors F430 Wrecking Bar is manufactured from aluminium with a cone-shaped point. Used when aligning flanges with bolt holes and for bending copper pipes with care. The bar is inserted in the pipe which is then heated up and bent to shape. This prevents damage to the actual pipe end. Very common when fitting car body components. Aluminium is easier and more comfortable to work with, does not rust and can handle the cold better.
Brick bolster made from drop-forged steel, heat-treated and tempered.With black powder-coated finish.The Roughneck ROU31992 Brick Bolster & Grip 102mm x 216mm (4in x 8.1/2in) 22mm Shank
The Hultafors 207 Steel Pinch Bar is made from 6-square high quality steel. It has a wide and thin chisel make it easy to use in narrow spaces. The long and cone shaped tip can be used for aligning flanges with bolt holes and the cone tip facilitates the installation of O-rings. The cone shaped tip is long and evenly grinded and both ends are unpainted to avoid discolouration.1 x Hultafors 207 Steel Pinch Bar 500mm (20in)
The Faithfull combined feather edge and straight edge is made from extruded mill finished aluminium which is exceptionally light and manoeuvrable. Manufactured with one edge tapered and one flat edge. It can also be used as a straight edge for ruling and cutting. The models featuring the scale along the length are graduated in metric at 5 mm intervals and numbered every 50 mm. The ‘FE6FE’ has one edge sharply tapered and one flat edge.This models features a metric scale along the length graduated at 5mm intervals and numbered every 50 mm. Size 1800mm (6 ft)Section: 93 x 25mm (3 5/8 x 1 in)
The Faithfull drywall taping knives are used for spreading jointing compound and when applying paper or fibreglass drywall tape, to cover joints in plasterboard. The knives feature a soft grip handle with a thumb rest and a flexible Blue Steel tapered shaped blade to assist when running in corners. Other common uses include applying covering over nail and screw indents, patching holes, and smoothing wall-coverings. Available in two widths of 200 or 300mm.The DWTAPE300 is 300mm wide
The scaffold key is used for aligning and tightening scaffold eye bolts. It has a hook at one end and a hardened tempered taper square at the other. Length: 300mm.
The Roughneck Utility Bars are manufactured from stamped alloy steel that has been hardened and tempered. They have a painted and powder coated finish with polished tips and an integral nail puller to remove embedded nails.1 x Roughneck Mini Utility Bar 175mm (7in)
