The Irwin 10 piece set of T-shank jigsaw blades for AEG, Bosch, DEWALT and Hitachi Jigsaws for metal and wood cutting are manufactured from high quality materials. Contain the following pieces: 2 x 10504221 (T111C) Wood cutting 100mm 8 tpi.2 x 10504218 (T144D) Wood cutting 100mm 6 tpi (fast cut).2 x 10504219 (T101B) Wood cutting 100mm 10 tpi.1 x 10504222 (T101D) Wood cutting 100mm 6 tpi (clean cut).2 x 10504220 (T118A) Metal cutting 92mm Progressive 17 - 23 tpi.1 x 10504225 (T118B) Metal cutting 92mm Progressive 11 - 13 tpi.
Irwin Sabre Saw Blades 610R 150mm Metal & Wood Cutting blades offer superior construction and design making them faster cutting and longer lasting. Cuts composition materials such as plastic, pipe, carbon steel and stainless steelSuitable for use with materials 3.2mm (1/8 in) and thicker. Length: 150mm.Teeth: 10tpi.Irwin 610R Sabre Saw Blade Metal & Wood Cutting. Pack of 5.
The DEWALT Cordless Construction Trim Saw Blade has impact resistant carbide teeth that help to reduce the chance of chipping or breaking a tooth. The ultra sharp carbide teeth mean less force is required when pushing the blade through the timber. Its thin kerf blade design yields more cuts per charge, minimising battery drain, whilst the tripe triple action sharpening process grinds the tip to a razor sharp edge providing a smooth finish. The fast, smooth cutting action and durable construction makes it ideal for demanding jobsite operations.This DEWALT Cordless Construction Trim Saw Blade has been designed for fast cutting in wood and will fit the DW935 and DW936 models. Specification: Blade Diameter: 165mmBlade Bore: 20mmTooth Count: 24Plate Thickness: 1.0mmKerf Thickness: 1.65mmGrind Type: ATBRake Angle: +24°
The DEWALT FlexVolt XR Wood Reciprocating Blades are coated in a special Toughcoat finish which reduces the build up of heat thus improving cutting performance and speed up to twice as much as market competitors. They have been optimised to deliver the best cutting performance in wood cutting applications from light to heavy demolition work. The blades can tackle nail embedded wood in window frames, door frames, decking and more. Designed to be used in conjunction with the FlexVolt 54 Volt Reciprocating Saw.The DEWALT DT99554 FlexVolt XR Wood Reciprocating Blades have the following specification: Length: 152mm.TPI: 4/6.Pack Size: 5.
The DEWALT FlexVolt XR Mitre Saw Blade with fine grade carbide tips and an ATB+R tooth configuration. This helps to reduce the cutting force required and offer increased efficiency for maximum cordless run time. The ultra-thin kerf design and optimised face shear provide fast, smooth cuts. The body features expansion slots for low vibration and reduced noise. Nail tough blade, perfect for cutting through nail embedded wood. Suited to the cutting of large and thick timbers and various other site materials. Optimised for use with the range of FlexVolt Mitre Saws.This DEWALT FlexVolt XR Mitre Saw Blade has the following specification: Blade Diameter: 305mm.Bore Size: 30mm.Tooth Count: 42.Kerf Thickness: 2.16mm.Plate Thickness: 1.60mm.Grind: ATB+R.Rake Angle: 7°.
These Faithfull Bi-Metal Demolition Sabre Saw Blades are designed for making quick and clean cuts in mixed materials. These high-quality, flexible blades are manufactured from 8% cobalt bi-metal for precision and stability. They can be used on wood, plastic, non-ferrous metals and are ideal for wood embedded with nails, great for pallet repair. They will also cut composite materials such as plastic, pipe and carbon steel. Ideally suited for materials that are 3.2mm and thicker. Suitable for use with most all-purpose saws (pin fitting, manual or quick-release).Pack of 5 Faithfull S1120HF Bi-Metal Sabre Saw Blades Demolition 300mm 10 TPI
Faithfull Professional TCT Circular Saw Blade with 7mm Tungsten Carbide Tipped teeth to ensure a long working life and accuracy of cut. Each blade has laser cut expansion slots to improve their performance by reducing heat build up. Available in a variety of sizes with different tooth counts that allow the user to select the correct blade for the job in hand. All the blades in this range fit most popular makes of power machines.This Faithfull TCT Circular Saw Blade has the following specification: Application: General Purpose.Blade Diameter: 235mm.Bore: 35mm.Teeth: 30.Bush: 30, 25 & 16mm.Rake: POS.
These DEWALT Bi-Metal Reciprocating Blades are suitable for cutting ferrous and non-ferrous metals, sheet steel, pipes and profiles. Specification: Length: 228mmPitch: 1.8mmTPI: 14Cut Type: FastPack Quantity: 5 DEWALT Bi-Metal Reciprocating Blades for cutting metal have an adjusted tooth setting for maximum durability and M2 HSS cutting edges for sharpness. Bi-metal construction, a combination of HCS and HSS for greater flexibility. A 25mm (1in) high blade body provides increased strength and durability. The universal shank fits all major brands including DeWalt, Bosch, Hitachi, Flex, Makita, Metabo and Skil.
Irwin Sabre Saw Blades 956R Nail Embedded Wood offer superior construction and design making them faster cutting and longer lasting. These blades cut nail embedded wood and are suitable for use with materials 5mm (3/16 Inch) and thicker. Length: 225mm.Teeth: 6 tpi.Irwin Sabre Saw Blades 956R Nail Embeded Wood Pack of 5. Length: 225mm.Teeth: 6 tpi.
The DEWALT XPC Jigsaw blades have a optimised tooth angle which provides long life and clean tear-free cuts at high speeds in all wood materials. With a thicker blade body, increased taper angle and optimised tooth geometry for greater accuracy and control of cut. They have a slim narrow angled tooth design for clean cutting with less material breakout. The Plunge Point™ tip allows for easy plunge cutting into all wood and wood substitute materials. Optimum tooth geometry provides increased blade and tooth strength and premium steel body for longer blade cutting life. Larger deeper gullets between teeth for easier wood chip removal and faster cutting. For use in hard and soft woods including laminates, plywood, chipboard and plastics.The DEWALT DT2216-QZ (T101B) XPC HCS Wood Jigsaw Blades provide fast curve cuts in wood, chipboard and plastics.
The Starrett RG FB Carbon Bandsaw Blade is an economical blade with a flexible carbon steel back for general purpose cutting. For cutting applications in: wood, plastics, low alloy and non-ferrous metals. It come with the ability to run at high speed and is ideal for both contour and straight cutting. Use on vertical and horizontal machines. 1 x Starrett SK FB Carbon Bandsaw Blade 1,511 x 10 x 0.35mm x 6T.
IRWIN Scorpion Saw Blade for cutting in sheet steel, aluminum, copper pipes and most non-ferrous metals up to 3mm. This blade fits the Black Decker models: KS880EC, KS890EK and RS890K. Specification: Overall Length: 125mm.
This reciprocating saw blade offering from Irwin has a blade for virtually every metal cutting application. Suitable for use with materials 1.5 to 10mm (1/16 inch to 3/8 inch) thick, dependent on the TPI of the blade. Cuts all metals including non ferrous, pipe conduit, stainless and sheet metal.Blade Type: Metal Cutting, 614R 150mm x 14tpi. IRWIN blades offer superior construction and design making them faster cutting and longer lasting. Pack of 5
Faithfull Professional TCT Circular Saw Blade with 7mm Tungsten Carbide Tipped teeth to ensure a long working life and accuracy of cut. Each blade has laser cut expansion slots to improve their performance by reducing heat build up. Available in a variety of sizes with different tooth counts that allow the user to select the correct blade for the job in hand. All the blades in this range fit most popular makes of power machines.This Faithfull TCT Circular Saw Blade has the following specification: Application: Fast Rip.Blade Diameter: 190mm.Bore: 30mm.Teeth: 24.Bush: 20 & 16mm.Rake: POS.
The IRWIN Coarse Wood Cutting Sabre Saw Blades come with aggressive teeth for fast sawing. Superior construction and design makes them faster cutting and longer lasting. Labelling on the blade makes it easy to identify the right blade for the right application.Pack of 2 IRWIN Sabre Saw Blades Coarse Wood Cutting 240mm. Suitable for sawing wood and branches up to a thickness of 120mm.
The Irwin Construction Table & Mitre Circular Saw Blade with welded carbide teeth for a stronger tooth bond and longer life. The ultra compact carbide is up to 70% tougher than standard carbide for superior sharpness and cut quality. The blades have innovative heat vents and a fully hardened plate that runs truer for longer and with more accuracy. They have an alternate top bevel (ATB) tooth grind for cross-cutting and ripping in all woods.The IRWIN Construction Mitre Circular Saw Blade has the following specifications: Blade Diameter: 216mm.Bore: 30mm.Teeth: 48.Kerf Thickness: 2.0mm.Tooth Config: ATB/Neg.Machine: Mitre.
The IRWIN General Purpose Saw Blade is made with construction grade tungsten carbide tips to retain their edge for longer and are resharpenable. Expansion slots help to dissipate heat and prevent warping. The blades have a fully hardened plate which runs truer for longer and with more accuracy. They have an alternate top bevel (ATB) tooth grind for cross-cutting and ripping in all woods. Coated with a corrosion-resistant coating for increased, high quality performance.This Irwin General Purpose Saw Blade has the following specifications: Blade Diameter: 85mm.Bore: 10mm.Teeth: 44.Tooth Config: ATB.Machine: Corded Saw.
The IRWIN General Purpose Saw Blade is made with construction grade tungsten carbide tips to retain their edge for longer and are resharpenable. Expansion slots help to dissipate heat and prevent warping. The blades have a fully hardened plate which runs truer for longer and with more accuracy. They have an alternate top bevel (ATB) tooth grind for cross-cutting and ripping in all woods. Coated with a corrosion-resistant coating for increased, high quality performance.This Irwin General Purpose Saw Blade has the following specifications: Blade Diameter: 85mm.Bore: 10mm.Teeth: 24.Tooth Config: ATB.Machine: Corded Saw.
The IRWIN Coarse Wood Cutting Sabre Saw Blades come with aggressive teeth for fast sawing. Superior construction and design makes them faster cutting and longer lasting. Labelling on the blade makes it easy to identify the right blade for the right application.Pack of 2 IRWIN Sabre Saw Blades Coarse Wood Cutting 305mm. Suitable for sawing wood, plywood and plastic up to a thickness of 250mm.
The DEWALT Series 60 Extreme Circular Saw Blade with laser cut expansion slots that help to reduce vibration and noise. The extra large sub micro grain carbide teeth remain sharper for much longer and can be resharpened up to 20 times. This stationary circular saw blade range can be used for cutting in natural wood, plywood, laminates, particleboard and MDF. Ideal for both table and mitre saws.The DEWALT DT4322 Series 60 Circular Saw Blade has the following specification: Finish: General Purpose.Blade Diameter: 250mm.Bore Size: 30mm.Tooth Count: 40.Plate Thickness: 2.2mm.Kerf Thickness: 3.0mm.Grind: ATB.Rake Angle: +10°.
The DEWALT Series 40 Circular Saw Blade is designed for use in stationary saws. With large, general purpose K10 carbide tips for cutting wood and non-ferrous metals. They can be resharpened up to 15 times. High precision laser manufacture ensures a flat blade body and engineered expansion slots prevent blade overheating and warping. These blades are designed with Alternate Top Bevel (ATB) teeth to reduce splinters.The DEWALT DEWDT4031QZ circular saw blade has the following specifications: Finish: General Purpose.Blade Diameter: 184mm.Bore Size: 16mm.Tooth Count: 28.Plate Thickness: 1.7mm.Kerf Thickness: 2.6mm.Grind Geometry: ATB Rake Angle: +25°.
The Starrett RG FB Carbon Bandsaw Blade is an economical blade with a flexible carbon steel back for general purpose cutting. For cutting applications in: wood, plastics, low alloy and non-ferrous metals. It come with the ability to run at high speed and is ideal for both contour and straight cutting. Use on vertical and horizontal machines. 1 x Starrett SK FB Carbon Bandsaw Blade 1,854 x 10 x 0.65mm x 6T.
The DEWALT FlexVolt XR Table Saw Blade with fine grade carbide tips and an ATB+R tooth configuration. This helps to reduce the cutting force required and offer increased efficiency for maximum cordless run time. The ultra-thin kerf design and optimised face shear provide fast, smooth cuts. The body features expansion slots for low vibration and reduced noise. Nail tough blade, perfect for cutting through nail embedded wood. Suited to the cutting of large and thick timbers and various other site materials. Optimised for use with the DEWALT 54 Volt FlexVolt Table Saw to deliver maximum performance.This DEWALT FlexVolt XR Table Saw Blade has the following specification: Application: Ripping.Finish: General Purpose.Blade Diameter: 210mm.Bore Size: 30mm.Tooth Count: 36.Kerf Thickness: 1.80mm.Plate Thickness: 1.24mm.Grind: ATB+R.Rake Angle: 20°.
Faithfull Professional Triple Chip Ground TCT Circular Saw Blade with 7mm Tungsten Carbide Tipped teeth to ensure a long working life and accuracy of cut. Each blade has laser cut expansion slots to improve their performance by reducing heat build up. Negative rake blade (NEG) is advisable when the blade is taken to the workpiece. This blade has triple angle ground teeth and negative rake for use with Mitre Saws and Radial Arm Saws when cutting laminates and aluminium.This Faithfull TCT Circular Saw Blade has the following specification: Blade Diameter: 216mm.Bore: 30mm.Teeth: 48.Rake: TCG NEG.
Faithfull Professional TCT Circular Saw Blade with 7mm Tungsten Carbide Tipped teeth to ensure a long working life and accuracy of cut. Each blade has laser cut expansion slots to improve their performance by reducing heat build up. Available in a variety of sizes with different tooth counts that allow the user to select the correct blade for the job in hand. All the blades in this range fit most popular makes of power machines.This Faithfull TCT Circular Saw Blade has the following specification: Application: Fast Rip.Blade Diameter: 128mm.Bore: 20mm.Teeth: 14.Bush: 16 & 13mm.Rake: POS.
These DEWALT Bi-Metal Reciprocating Blades are suitable for cutting ferrous and non-ferrous metals, sheet steel, pipes and profiles. Specification: Length: 304mmPitch: 1.8mmTPI: 14Cut Type: FastPack Quantity: 5 DEWALT Bi-Metal Reciprocating Blades for cutting metal have an adjusted tooth setting for maximum durability and M2 HSS cutting edges for sharpness. Bi-metal construction, a combination of HCS and HSS for greater flexibility. A 25mm (1in) high blade body provides increased strength and durability. The universal shank fits all major brands including DeWalt, Bosch, Hitachi, Flex, Makita, Metabo and Skil.
The Starrett RG FB Carbon Bandsaw Blade is an economical blade with a flexible carbon steel back for general purpose cutting. For cutting applications in: wood, plastics, low alloy and non-ferrous metals. It come with the ability to run at high speed and is ideal for both contour and straight cutting. Use on vertical and horizontal machines. 1 x Starrett RG FB Carbon Bandsaw Blade 1,435 x 6 x 0.35mm x 10T.
These DEWALT HCS Jigsaw Blades are made from High Carbon Steel (HCS) and have been engineered to deliver a quality cut in a variety of materials, including wood, laminates and plastics.The DEWALT DEWDT2169QZ HCS jigsaw blades are engineered to deliver a quality cut in a variety of materials, including wood, laminates and plastics. The blades are made from high carbon steel for increased durability with a T shank fitting for all T-shank Jigsaws. The swiss made jigsaw blade is ideal for fast, straight cuts in wood and chipboard up to 100mm thick. The DEWALT DEWDT2169QZ jigsaw blade has the following specifications:Overall Length: 152mmWorking Length: 116mmTooth Pitch: 4mmMax DOC: 100mmEquivalent Bosch Ref: T344DPack Quantity: 5.
These Irwin Wood Jigsaw Blades are made from Carbon steel for use in softer materials such as wood, laminated chipboard, and plastics. They have 3 Sided, fleam ground teeth for fast cut and clean finishes in all wood applications. T Shank for AEG, Bosch, DEWALT and Hitachi Jigsaws. These Irwin 10504219 (T101B) Wood Jigsaw Blades provide straight cuts in hard and soft wood, plastics, plywood, laminated particle board 4-30mm.
Faithfull Professional TCT Circular Saw Blade with 7mm Tungsten Carbide Tipped teeth to ensure a long working life and accuracy of cut. Each blade has laser cut expansion slots to improve their performance by reducing heat build up. Available in a variety of sizes with different tooth counts that allow the user to select the correct blade for the job in hand. All the blades in this range fit most popular makes of power machines.This Faithfull TCT Circular Saw Blade has the following specification: Application: Fast Rip.Blade Diameter: 190mm.Bore: 16mm.Teeth: 24.Rake: POS.
The DEWALT bi-metal construction blades combine HCS and HSS for increased flexibility and durability. The universal shank fits all major brands including DEWALT, Bosch, Hitachi, Flex, Makita, Metabo and Skil. The blades have an aggressive shank angle for longer cutting life with sharper tooth geometry for faster cutting in ferrous and non ferrous metal, sheet metal, pipes and profiles.This DEWALT Bi-Metal Metal Cutting Reciprocating Blade has the following specification: Application: Cuts in metal, sheet metal, pipes and profiles.Material Thickness: 3mm.Length: 152mm.Pitch: 1.4mm.Pack Quantity: 5.
These Irwin Wood Jigsaw Blades are made from Carbon steel for use in softer materials such as wood, laminated chipboard, and plastics. They have 3 Sided, fleam ground teeth for fast cut and clean finishes in all wood applications. T Shank for AEG, Bosch, DEWALT and Hitachi Jigsaws. These Irwin 10504224 (T244D) Wood Jigsaw Blades provide very fast clean cuts in hard and soft wood, particleboard 6-60mm.
These Faithfull Jigsaw Blades are made from High Carbon Steel (HCS). For use in hard and soft woods including laminates, plywood, chipboard and plastics.These Faithfull T101DP Wood Jigsaw Blades provide clean and precise straight cuts. Ideal for hardwood, softwood, laminated boards, fibre boards and plastics..
DEWALT FlexVolt XR Circular Saw Blade with fine grade carbide tips and an ATB+R tooth configuration. This helps to reduce the cutting force required and offer increased efficiency for maximum cordless run time. The ultra-thin kerf design and optimised face shear provide fast, smooth cuts. The body features expansion slots for low vibration and reduced noise. Nail tough blade, perfect for cutting through nail embedded wood. Suited to the cutting of large and thick timbers and various other site materials. Optimised for use with FlexVolt Power Tools.This DEWALT FlexVolt XR Circular Saw Blade has the following specification: Application: Ripping.Finish: General Purpose.Blade Diameter: 190mm.Bore: 30mm.Teeth: 36.Kerf Thickness: 1.55mm.Plate Thickness: 0.99mm.Grind: ATB+R.Rake Angle: 25°.
