These DEWALT HCS Jigsaw Blades are made from High Carbon Steel (HCS) and have been engineered to deliver a quality cut in a variety of materials, including wood, laminates and plastics.The DEWALT DEWDT2075QZ extra thick blade is ideal for fast extra straight cutting in wood and chipboard up to 60mm thick. The blades are made from high carbon steel for increased durability with a T shank fitting for all T-shank Jigsaws. They can be used to cut a variety of materials including wood, metal, laminates & plastic.The DEWALT DEWDT2075 jigsaw blade has the following specifications:Overall Length: 100mm Working Length: 68mm Tooth Pitch: 4mm Max DOC: 60mm Equivalent Bosch Ref: T144DP Pack Quantity: 5
The DEWALT XPC Jigsaw blades have a optimised tooth angle which provides long life and clean tear-free cuts at high speeds in all wood materials. With a thicker blade body, increased taper angle and optimised tooth geometry for greater accuracy and control of cut. They have a slim narrow angled tooth design for clean cutting with less material breakout. The Plunge Point™ tip allows for easy plunge cutting into all wood and wood substitute materials. Optimum tooth geometry provides increased blade and tooth strength and premium steel body for longer blade cutting life. Larger deeper gullets between teeth for easier wood chip removal and faster cutting. For use in hard and soft woods including laminates, plywood, chipboard and plastics.The DEWALT DT2220-QZ (T144DF) XPC Bi-Metal Wood Jigsaw Blades provide fast straight cuts in hard wood, chipboard, plywood and MDF. Bi-Metal products provide an increased life, up to 2 x life of standard HCS blades.
Jigsaw Metal & Wood Cutting Blades made from Bi-Metal which is a highly flexible, tough combination of HSS and HCS which is suitable for the most demanding applications. HSS and BiMetal progressive tooth blade for all-purpose cutting in wood and metal, whilst also extendeding life. T Shank for AEG, Bosch, DEWALT and Hitachi Jigsaws. Progressive tooth spacing for fast cuts, long life in metal 3.5-10mm, wood with nails, particleboard 3.5-90mm, non-ferrous metal, aluminium, plastics 2-30mm Length: 132mm.Pitch: Progressive. Supplied in a pack of 5.
The DEWALT Cordless Mitre Saw Blades have been design for use with the DCS365 Cordless XPS Mitre Saw. The blades produce a higher quality cut with reduced tear-out and less vibration, increasing battery life. They also feature optimised grind angles and ultra sharp teeth with a new, thin plate design.This DEWALT Cordless Mitre Saw Blade has the following specification: Application: Plywood / Natural Wood / MDF.Finish: Ultra Fine Finish.Blade Diameter: 184mm.Bore Size: 16mm.Tooth Count: 60.Kerf Thickness: 2.16mm.Plate Thickness: 1.0mm.Grind: ATB.Rake Angle: +7°.
The DEWALT FlexVolt XR Wood Reciprocating Blades are coated in a special Toughcoat finish which reduces the build up of heat thus improving cutting performance and speed up to twice as much as market competitors. They have been optimised to deliver the best cutting performance in wood cutting applications from light to heavy demolition work. The blades can tackle nail embedded wood in window frames, door frames, decking and more. Designed to be used in conjunction with the FlexVolt 54 Volt Reciprocating Saw.The DEWALT DT99554 FlexVolt XR Wood Reciprocating Blades have the following specification: Length: 152mm.TPI: 4/6.Pack Size: 5.
The DEWALT FlexVolt XR Metal Reciprocating Blades are coated in a special Toughcoat finish which reduces the build up of heat thus improving cutting performance and speed up to twice as much as market competitors. They have been optimised to deliver the best cutting performance in metal rebar and similar metals. Designed to be used in conjunction with the FlexVolt 54 Volt Reciprocating Saw.The DEWALT DT99552 FlexVolt XR Metal Reciprocating Blades have the following specification: Length: 203mm.TPI: 14/18.Pack Size: 5.
The Starrett BU4 Jigsaw Blade Assortment Pack contains a selection of the most popular blades. Unified Shank™ blades will fit in virtually all machines. Supplied in a handy case. Contains the following: 1 x BU36 Wood Cutting Jigsaw Blade 75 x 7.5 x 1.3mm x 6 TPI1 x BU36T Wood Cutting Jigsaw Blade, Tapered Teeth 75 x 7.5 x 1.3mm x 6 TPI1 x BU38 Wood Cutting Jigsaw Blade 75 x 7.5 x 1.3mm x 8 TPI1 x BU46 Wood Cutting Jigsaw Blade 100 x 9.5 x 1.3mm x 6 TPI1 x BU56 Wood Cutting Jigsaw Blade 125 x 9.5 x 1.3mm x 6 TPI1 x BU310T Wood Cutting Jigsaw Blade, Tapered Teeth 75 x 7.5 x 1.3mm x 10 TPI1 x BU310DT Wood Cutting Jigsaw Blade, Tapered Down Stroke Teeth 75 x 7.5 x 1.3mm x 10 TPI 1 x BU3DC Dual Cut™ Fine Finish Straight Wood Cutting Jigsaw Blade 100 x 7.5 x 1.5mm x 9-19 TPI1 x BU2DCS Dual Cut™ Fine Finish Scroll Wood Cutting Jigsaw Blade 81 x 4.5 x 1.3mm x 9-19 TPI 1 x BU41014 Multi Purpose Varipitch Jigsaw Blade 100 x 9.5 x 1mm x 10-14 TPI1 x BU214 Multi Purpose Jigsaw Blade 50 x 7.5 x 1mm x 14 TPI1 x BU214S Multi Purpose Scroll Jigsaw Blade 50 x 7.5 x 1mm x 14 TPI1 x BU218 Multi Purpose Jigsaw Blade 50 x 7.5 x 1mm x 18 TPI1 x BU418 Multi Purpose Jigsaw Blade 100 x 9.5 x 1mm x 18 TPI1 x BU230X Multi Purpose Carbide Grit Jigsaw Blade 50 x 75 x 1mm 1 x BU224 Metal Cutting Jigsaw Blade 50 x 7.5 x 1mm x 24 TPI1 x BU224S Metal Cutting Scroll Jigsaw Blade 50 x 4.5 x 1mm x 24 TPI1 x BU424 Metal Cutting Jigsaw Blade 100 x 9.5 x 1mm x 24 TPI1 x BU232 Metal Cutting Jigsaw Blade 50 x 7.5 x 1mm x 32 TPI
The DEWALT Series 60 Extreme Circular Saw Blade with laser cut expansion slots that help to reduce vibration and noise. The extra large sub micro grain carbide teeth remain sharper for much longer and can be resharpened up to 20 times. This stationary circular saw blade range can be used for cutting in natural wood, plywood, laminates, particleboard and MDF. Ideal for both table and mitre saws.The DEWALT DT4351 Series 60 Circular Saw Blade for smooth cross-cuts in plywood, softwood and all hardwoods. The alternate top bevel and triple chip grind geometry with tuned grinding angles give a good surface finish. It has the following specification: Finish: Extra Fine.Blade Diameter: 250mm.Bore Size: 30mm.Tooth Count: 60.Plate Thickness: 2.2mm.Kerf Thickness: 3.0mm.Grind: ATB.Rake Angle: +10°.
Irwin Sabre Saw Blades 624R 150mm 24tpi Metal Cutting offer superior construction and design making them faster cutting and longer lasting.Cuts all metals including non ferrous, pipe conduit, stainless and sheet metal.Suitable for use with materials 1.5 to 10mm (1/16 inch to 3/8 inch) thick, dependent on the TPI of the blade. Size: 150mm.Teeth: 24 tpi.Irwin Sabre Saw Blades 624R 150mm 24tpi Metal Cutting Pack of 5.Size: 150mm.Teeth: 24 tpi.
The Irwin General Purpose Table & Mitre Saw Blade with construction grade tungsten carbide tips that retain their edge for longer and are resharpenable. Expansion slots help to dissipate heat and prevent warping. The blades have a fully hardened plate that runs truer for longer and with more accuracy. They have an alternate top bevel (ATB) tooth grind for cross-cutting and ripping in all woods. Coated with a corrosion-resistant coating for increased, high quality performance.This Irwin General Purpose Table & Mitre Saw Blade has the following specifications: Blade Diameter: 216mm.Bore: 30mm.Teeth: 48.Kerf Thickness: 2.5mm.Tooth Config: ATB.Machine: Table & Mitre.
These Irwin Wood Jigsaw Blades are made from Carbon steel for use in softer materials such as wood, laminated chipboard, and plastics. They have 3 Sided, fleam ground teeth for fast cut and clean finishes in all wood applications. T Shank for AEG, Bosch, DEWALT and Hitachi Jigsaws. These Irwin 10504218 (T144D) Wood Jigsaw Blades provide fast, clean cuts in hard and soft wood, particle board 6-60mm.
These Irwin Wood Jigsaw Blades are made from Carbon steel for use in softer materials such as wood, laminated chipboard, and plastics. They have 3 Sided, fleam ground teeth for fast cut and clean finishes in all wood applications. T Shank for AEG, Bosch, DEWALT and Hitachi Jigsaws. These Irwin 10504222 (T101D) Wood Jigsaw Blades provide fast, straight cuts in hard and soft wood, plastics, particleboard 6-60mm.
The DEWALT bi-metal construction blades combine HCS and HSS for increased flexibility and durability. They can be used for fast cutting in wood, wood with nails and tough plastics. The universal shank fits all major brands including DEWALT, Bosch, Hitachi, Flex, Makita, Metabo and Skil.The DEWALT DEWDT2359QZ reciprocating blades are ideal to be used for fast cuts in wood with nails and tough plastic.
The DEWALT FlexVolt XR Table Saw Blade with fine grade carbide tips and an ATB+R tooth configuration. This helps to reduce the cutting force required and offer increased efficiency for maximum cordless run time. The ultra-thin kerf design and optimised face shear provide fast, smooth cuts. The body features expansion slots for low vibration and reduced noise. Nail tough blade, perfect for cutting through nail embedded wood. Suited to the cutting of large and thick timbers and various other site materials. Optimised for use with the DEWALT 54 Volt FlexVolt Table Saw to deliver maximum performance.This DEWALT FlexVolt XR Table Saw Blade has the following specification: Application: Ripping.Finish: General Purpose.Blade Diameter: 210mm.Bore Size: 30mm.Tooth Count: 36.Kerf Thickness: 1.80mm.Plate Thickness: 1.24mm.Grind: ATB+R.Rake Angle: 20°.
Faithfull Professional TCT Circular Saw Blade with 7mm Tungsten Carbide Tipped teeth to ensure a long working life and accuracy of cut. Each blade has laser cut expansion slots to improve their performance by reducing heat build up. Available in a variety of sizes with different tooth counts that allow the user to select the correct blade for the job in hand. All the blades in this range fit most popular makes of power machines.This Faithfull TCT Circular Saw Blade has the following specification: Application: General Purpose.Blade Diameter: 230mm.Bore: 30mm.Teeth: 30.Rake: POS.
The DEWALT Corded Extreme Framing Circular Saw Blades have a thin kerf (cutting width) to ensure that less push force is required by the user and that they cut straighter with reduced binding. The durable teeth stay sharp for a long time with reduced breakage. Can be used for ripping and cross-cutting natural timbers. Cutting composite wood based sheet materials e.g. plywood, MDF and chipboard. It is NOT recommended for timbers that may contain nails.The DEWALT DT10300QZ Circular Saw Blade has the following specifications: Blade Diameter: 165mm.Bore Size: 20mm.Tooth Count: 24.
The DEWALT DEWDT2161QZ HSS jigsaw blades are engineered to deliver a quality cut in a variety of ferrous and non-ferrous metals and are made from fully hardened high speed steel for increased durability. The blades have a T shank fitting for all T-shank Jigsaws. They are ideal for straight cuts in thick metal, non-ferrous metal & aluminium from 2.5 - 6mm thick. The DEWALT DEWDT2161QZ has the following specifications:Overall Length: 76mmLength: 50mmTooth Pitch: 2mmMax DOC: 6mmEquivalent Bosch Ref: T118B
These Irwin Wood Jigsaw Blades are made from Carbon steel for use in softer materials such as wood, laminated chipboard, and plastics. They have 3 Sided, fleam ground teeth for fast cut and clean finishes in all wood applications. T Shank for AEG, Bosch, DEWALT and Hitachi Jigsaws. These Irwin 10504221 (T111C) Wood Jigsaw Blades provide fast, coarse cuts in hard and soft wood, plastics 5-60mm.
The Irwin Professional Aluminium Circular Saw Blade has expansion slots that help keep the blade flat. Triple Chip Ground Tooth (TCG) provide an excellent cut finish. Specially designed for cutting all types of non-ferrous metals such as aluminium, copper, lead and plastics.This IRWIN Professional Aluminium Circular Saw Blade has the following specifications: Blade Diameter: 184mm.Bore: 30mm.Teeth: 48.Kerf Thickness: 2.5mm.Tooth Config: TCG.
The DEWALT DT99591 FlexVolt XR Poroton Blades are well suited to the cutting of standard class 12 clay blocks as well as various other materials such as general masonry, concrete and block. Their extreme runtime design enhances durability doubling the blades life span. Compatible with the DEWALT FlexVolt Alligator Saw 54 Volt. Can also be used with other DEWALT Models: DWE397, DWE398 & DWE399.
The Irwin Sabre Saw Blades cut all metals including non ferrous, pipe conduit, stainless and sheet metal. These metal cutting blades are suitable for use with materials 1.5 to 10mm (1/16 to 3/8 in) thick, dependent on the TPI of the blade. These blades have the following specification: Blade Type: Metal Cutting, 818R, 200mm x 18TPI. The Irwin IRW10504156 Sabre Saw 818R Blades (200mm) comes in a pack of 25 with 18TPI. These metal cutting blades are suitable for use with materials 1.5 to 10mm (1/16 to 3/8 in) thick, dependent on the TPI of the blade. Specifications: Blade Type: Metal Cutting, 818R. 200mm x 18TPI. Pack Quantity: 25.
Irwin Sabre Saw Blades 610R 150mm Metal & Wood Cutting blades offer superior construction and design making them faster cutting and longer lasting. Cuts composition materials such as plastic, pipe, carbon steel and stainless steelSuitable for use with materials 3.2mm (1/8 in) and thicker. Length: 150mm.Teeth: 10tpi.Irwin 610R Sabre Saw Blade Metal & Wood Cutting. Pack of 5.
Irwin Sabre Saw Blades 956R Nail Embedded Wood offer superior construction and design making them faster cutting and longer lasting. These blades cut nail embedded wood and are suitable for use with materials 5mm (3/16 Inch) and thicker. Length: 225mm.Teeth: 6 tpi.Irwin Sabre Saw Blades 956R Nail Embeded Wood Pack of 5. Length: 225mm.Teeth: 6 tpi.
The DEWALT Stationary Construction Circular Saw Blade has impact resistant carbide teeth that help to reduce the chance of chipping or breaking a tooth. With ultra-sharp cutting edges and Alternate Top Bevel (ATB) teeth to reduce splinters. The blade features a wedge shoulder to protect the carbide from nail impact. The fast, smooth cutting action and durable construction makes it ideal for demanding jobsite operations, rough timber and cutting through embedded nails.This DEWALT Construction Circular Saw Blade has been designed for cutting rough timber, possibly with embedded nails. Specification: Blade Diameter: 305mmBlade Bore: 30mmTooth Count: 24Plate Thickness: 2.2mmKerf Thickness: 3.0mmGrind Type: ATBRake Angle: -5°
The Evolution Multi-Material Chop Saw Blade is made from premium materials in Japan. Ideal for the construction professional and for daily use on a construction site. Designed to cut mild steel*, aluminium, plastics and wood, even wood containing embedded nails, with a single blade. Perfect for cutting hard and softwood, decking, laminate flooring, mild steel angle, Unistrut® and conduit, plywood, MDF, aluminium checker plate, plastic pipes and sheet, plus many other materials. *Please refer to the blade marking for recommended cutting capacity on mild steel. Compatible with the following Evolution machines: R355CPS and RAGE2. Specification: Diameter: 355mmBore: 25.4mmTeeth: 36Kerf: 2.2mmMax. Speed: 1,600/rpm
The Makita B-33386 Specialized for Aluminium Cutting Blade has the following specifications: Blade Diameter: 260mm.Bore: 30mm.Kerf: 2.8mm.Rake: 0º.Thickness: 2.2mm.Tooth Count: 80.
The Irwin Construction Circular Saw Blade with expansion slots which dissipate heat and prevent warping. Its construction grade tungsten carbide tips retain their edge, and the plate is fully hardened for durability. The blade features alternate top bevel tooth grind (ATB) for cross cutting and ripping in all woods. Its corrosion resistant coating provides longer quality performance. Suitable for use with handheld corded machines.This IRWIN Construction Circular Saw Blade has the following specification: Blade Diameter: 210mm.Bore: 30mm.Teeth: 20.Kerf Thickness: 2.5mm.Tooth Config: ATB.
The Irwin Construction Circular Saw Blade with expansion slots which dissipate heat and prevent warping. Its construction grade tungsten carbide tips retain their edge, and the plate is fully hardened for durability. The blade features alternate top bevel tooth grind (ATB) for cross cutting and ripping in all woods. Its corrosion resistant coating provides longer quality performance. Suitable for use with handheld corded machines.This IRWIN Construction Circular Saw Blade has the following specification: Blade Diameter: 160mm.Bore: 20mm.Teeth: 30.Kerf Thickness: 2.5mm.Tooth Config: ATB.
DEWALT Construction Circular Saw Blades for use with cordless trimsaws. Suitable for first fix application where cut finish is less important and re-used timbers are often used. Teeth on these blades are designed to resist damage should they imapct foreign objects such as embedded nails and concrete. This 2 Piece DT90270 Construction Circular Saw Blade Pack contains the following: 1 x Construction Circular Saw Blade Cordless - Framing 165 x 20mm x 24T. 1 x Construction Circular Saw Blade Cordless - Framing 165 x 20mm x 36T.
This Trend CraftPro Cordless Saw Blade Triple Pack contains: 1 x CSB/16524T Thin Kerf Saw Blade for Cordless Saws 165 x 20mm x 24T 1 x CSB/16540T Thin Kerf Saw Blade for Cordless Saws 165 x 20mm x 40T 1 x CSB/16552T Thin Kerf Saw Blade for Cordless Saws 165 x 20mm x 52T Not for use with Bosch GSK 24.
The Irwin General Purpose Table & Mitre Saw Blade with construction grade tungsten carbide tips that retain their edge for longer and are resharpenable. Expansion slots help to dissipate heat and prevent warping. The blades have a fully hardened plate that runs truer for longer and with more accuracy. They have an alternate top bevel (ATB) tooth grind for cross-cutting and ripping in all woods. Coated with a corrosion-resistant coating for increased, high quality performance.This Irwin General Purpose Table & Mitre Saw Blade has the following specifications: Blade Diameter: 315mm.Bore: 30mm.Teeth: 40.Kerf Thickness: 3.2mm.Tooth Config: ATB.Machine: Table & Mitre.
The Irwin Construction Circular Saw Blade with expansion slots which dissipate heat and prevent warping. Its construction grade tungsten carbide tips retain their edge, and the plate is fully hardened for durability. The blade features alternate top bevel tooth grind (ATB) for cross cutting and ripping in all woods. Its corrosion resistant coating provides longer quality performance. Suitable for use with handheld corded machines.This IRWIN Construction Circular Saw Blade has the following specification: Blade Diameter: 230mm.Bore: 30mm.Teeth: 40.Kerf Thickness: 2.5mm.Tooth Config: ATB.
The DEWALT DEWDT2163QZ HSS jigsaw blades are engineered to deliver a quality cut in a variety of ferrous and non-ferrous metals. The blades feature fully hardened high speed steel for increased durability. The blades have a T shank fitting for all T-shank Jigsaws. They are ideal for fast, straight cuts in aluminium 4-15mm; metal & non-ferrous metal 4-6 mm & plastic up to 30mm thick. The DEWALT DEWDT2163QZ has the following specifications:Overall Length: 100mmLength: 72mmTooth Pitch: 3mmMax DOC: 30mmEquivalent Bosch Ref: T127DPack Quantity: 5
The DEWALT Corded Extreme Framing Circular Saw Blades have a thin kerf (cutting width) to ensure that less push force is required by the user and that they cut straighter with reduced binding. The durable teeth stay sharp for a long time with reduced breakage. Can be used for ripping and cross-cutting natural timbers. Cutting composite wood based sheet materials e.g. plywood, MDF and chipboard. It is NOT recommended for timbers that may contain nails.The DEWALT DT10304QZ Circular Saw Blade has the following specifications: Blade Diameter: 190mm.Bore Size: 30mm.Tooth Count: 24.
The DEWALT Cordless Extreme Framing Circular Saw Blade has a thin kerf (cutting width) to ensure that less push force is required by the user and that they cut straighter with reduced binding. The durable teeth stay sharp for a long time with reduced breakage. Suitable for ripping and cross-cutting natural timbers and cutting composite wood based sheet materials e.g. Plywood, MDF and chipboard. NOT recommended for timbers that contains nails.The DEWALT DT10640QZ Cordless Extreme Framing Circular Saw Blade has the following specifications: Blade Diameter: 165mm.Bore Size: 20mm.Tooth Count: 40.
