The Evolution RAGE8® Multi-Purpose Blade Pack is ideal for fast, efficient cuts through mild steel, copper pipe, metal sheeting, aluminium, reclaimed timber, aerated concrete, plastic and more. Contains the following: 1 x Thin Steel Balde with a shatter resistant bi-metal construction allows the blade to bend and flex without breaking. High quality, long lasting blade. 1 x Multipurpose Blade with a shatter resistant bi-metal construction allows the blade to bend and flex without breaking. Ideal for cutting metal sheeting, aluminium partioning, reclaimed wood with nails, aerated concrete and many plastic/glassfiber profiles. Replacement blades for Evolution RAGE8 Reciprocating Saw but will fit most other brands.
This Evolution Stainless Steel Cutting Circular Saw Blade has the following specification: Diameter: 180mmBore: 20mmTeeth: 48Kerf: 1.8mmMax. Speed: 3,900/min.
This Evolution Stainless Steel Cutting Circular Saw Blade has the following specification: Diameter: 185mmBore: 20mmTeeth: 48Kerf: 1.8mmMax. Speed: 3,900/min.
This Evolution Stainless Steel Cutting Circular Saw Blade has the following specification: Diameter: 230mmBore: 25.4mmTeeth: 60Kerf: 1.8mmMax. Speed: 3,000/min.
This Evolution Thin Steel Cutting Circular Saw Blade has the following specification: Diameter: 180mmBore: 20mmTeeth: 68Kerf: 1.6mmMax. Speed: 3,900/rpm
This Evolution Thin Steel Cutting Mitre Saw Blade has the following specification: Diameter: 185mmBore: 25.4mmTeeth: 68Kerf: 2.4mmMax. Speed: 3,900/rpm
This Evolution Thin Steel Cutting Mitre Saw Blade has the following specification: Diameter: 210mmBore: 25.4mmTeeth: 68Kerf: 2.4mmMax. Speed: 3,750/rpm
Irwin Jigsaw Metal Cutting Blades have fully hardened high speed steel for use in metal, aluminum, and no-ferrous metal. HSS milled teeth provide longer life and fast cuts in metalFast and even cuts in thin and thick metal. T Shank for AEG, Bosch, DEWALT and Hitachi Jigsaws. Straight cuts in metal, non-ferrous metal, aluminium, sheet metal, 3-6 mm (1/8Inch -1/4in).Length: 92mm.Pitch: 20. Supplied in a pack of 5.
These DEWALT Bi-Metal Demolition Blades have the following specification: Length: 152mmPitch: 4.2mmTPI: 6Pack Quantity: 5 DEWALT Fast Cut Demolition Reciprocating Blades have a plunge point tip for easy plunge cutting in all woods. Bi-metal construction, a combination of HCS and HSS for greater flexibility. Adjusted tooth setting for maximum durability and M2 HSS cutting edges for sharpness. The universal shank fits all major brands including DeWalt, Bosch, Hitachi, Flex, Makita, Metabo and Skil. Suitable for plasterboard, wood with nails, as well as demolition work.
Irwin Weldtec Circular Saw Blade with welded carbide teeth for a substantially stronger tooth bond and longer life. The ultra compact carbide is 70% tougher than standard carbide for superior sharpness and cut quality. The blades have innovative heat vents, and the fully hardened plate runs truer for longer and with more accuracy. They have alternate top bevel teeth (ATB) for cross cutting and ripping in all woods. Suitable for use with handheld corded machines.This IRWIN Weldtec Circular Saw Blade has the following specifications: Blade Diameter: 190mm.Bore: 30mm.Teeth: 40.Kerf Thickness: 2.4mm.Tooth Config: ATB.
These Faithfull Sabre Saw Blades BIM Demolition are high-quality blades manufactured for precision and stability. These bi-metal, flexible straight-cut blades are designed for making quick, coarse cuts and general demolition work. Manufactured for precision and stability when cutting. They can be used on wood, chipboard, wood with nails/metal, window frames and fibreglass/epoxy up to 100mm thick. Pack of 5 Faithfull S611DF Bi-Metal Sabre Saw Blade Demolition 150mm 6 TPI
These Faithfull Sabre Saw Blades BIM Demolition are high-quality blades manufactured for precision and stability. These bi-metal, flexible straight-cut blades are designed for making quick, coarse cuts and general demolition work. Manufactured for precision and stability when cutting. They can be used on wood, chipboard, wood with nails/metal, window frames and fibreglass/epoxy up to 100mm thick.Pack of 5 Faithfull S1111DF Bi-Metal Sabre Saw Blade Demolition 228mm 6 TPI
The DEWALT 2X Life Wood & Nail Reciprocating Blades have superior HSS (high speed steel) teeth with added Cobalt for excellent cutting performance and extreme durability in the most demanding applications. The optimised blade design provides increased height and thickness for sturdiness, strength and extreme durability. Fast and accurate cutting in wood applications thanks to the Plunge Point tip technology which pierces the wood and removes more material. The ToughCoat hardened coating lowers surface friction and reduces heat build up to promote long blade life.DEWALT 2X Life Wood & Nail Reciprocating Blades 152mm
The DEWALT XPC Jigsaw blades have a optimised tooth angle which provides long life and clean tear-free cuts at high speeds in all wood materials. With a thicker blade body, increased taper angle and optimised tooth geometry for greater accuracy and control of cut. They have a slim narrow angled tooth design for clean cutting with less material breakout. The Plunge Point™ tip allows for easy plunge cutting into all wood and wood substitute materials. Optimum tooth geometry provides increased blade and tooth strength and premium steel body for longer blade cutting life. Larger deeper gullets between teeth for easier wood chip removal and faster cutting. For use in hard and soft woods including laminates, plywood, chipboard and plastics.The DEWALT DT2217-QZ (T101BF) XPC Bi-Metal Wood Jigsaw Blades provide clean and fast straight cuts in hard wood, chipboard, plywood and laminates. Bi-Metal products provide an increased life, up to 2 x life of standard HCS blades.
Irwin Jigsaw Metal Cutting Blades have fully hardened high speed steel for use in metal, aluminum, and no-ferrous metal. HSS milled teeth provide longer life and fast cuts in metal Fast and even cuts in thin and thick metal. T Shank for AEG, Bosch, DEWALT and Hitachi Jigsaws. Straight cuts in metal, non-ferrous metal, aluminium, sheet metal, 1.5-3 mm (1/16Inch -1/8in ). Length: 92mm.Pitch: 24. Supplied in a pack of 5.
The DEWALT XPC Jigsaw blades have a optimised tooth angle which provides long life and clean tear-free cuts at high speeds in all wood materials. With a thicker blade body, increased taper angle and optimised tooth geometry for greater accuracy and control of cut. They have a slim narrow angled tooth design for clean cutting with less material breakout. The Plunge Point™ tip allows for easy plunge cutting into all wood and wood substitute materials. Optimum tooth geometry provides increased blade and tooth strength and premium steel body for longer blade cutting life. Larger deeper gullets between teeth for easier wood chip removal and faster cutting. For use in hard and soft woods including laminates, plywood, chipboard and plastics.The DEWALT DT2205-QZ (T101B) XPC HCS Wood Jigsaw Blades provide clean and fast straight cuts in wood, chipboard and plastics.
These Faithfull Sabre Saw Blades BIM Demolition are high-quality blades manufactured for precision and stability. These bi-metal, flexible straight-cut blades are designed for making quick, coarse cuts and general demolition work. Manufactured for precision and stability when cutting. They can be used on wood, chipboard, wood with nails/metal, window frames and fibreglass/epoxy up to 100mm thick.The Faithfull S1411DF Sabre Saw Blades are ideal for use on wood, chipboard, wood with nails/metal, window frames, and fibreglass/epoxy up to 100mm thick. Specification: Length: 300mmTPI: 6
These Faithfull Jigsaw Blades are made from High Carbon Steel (HCS). For use in hard and soft woods including laminates, plywood, chipboard and plastics.These Faithfull T244D Wood Jigsaw Blades provide fast curved cutting. Ideal for hardwood, softwood and laminated boards.
These Faithfull Metal Cutting Sabre Saw Blades are made from Bi-Metal, Bi-metallic blades contain eight percent Cobalt M42, and are particularly suitable for materials that are hard to cut. Manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to the speed and cutting application which they are intended to perform. Selecting the correct sabresaw blade for the task at hand is essential if the material is to be cut successfully and the desired result achieved. Will fit Sabresaws from the following brands: AEG, Black & Decker, Bosch, DeWalt, Elu, Fein, Hitachi, Makita, Metabo, Milwaukee, Ryobi and most other brands on sale within the UK.The Faithfull S922BF Bi-Metal Sabre Saw Blades are ideal for thick sheet metal (3-8mm) and for solid pipes/profiles (10-100mm). Specification: Length: 150mm (6in)TPI: 14 TPI
These Faithfull Bi-Metal Demolition Sabre Saw Blades are designed for making quick and clean cuts in mixed materials. These high-quality, flexible blades are manufactured from 8% cobalt bi-metal for precision and stability. They can be used on wood, plastic, non-ferrous metals and are ideal for wood embedded with nails, great for pallet repair. They will also cut composite materials such as plastic, pipe and carbon steel. Ideally suited for materials that are 3.2mm and thicker. Suitable for use with most all-purpose saws (pin fitting, manual or quick-release).Pack of 5 Faithfull S1122HF Bi-Metal Sabre Saw Blades Demolition 200mm 10 TPI
These Faithfull Bi-Metal Demolition Sabre Saw Blades are designed for making quick and clean cuts in mixed materials. These high-quality, flexible blades are manufactured from 8% cobalt bi-metal for precision and stability. They can be used on wood, plastic, non-ferrous metals and are ideal for wood embedded with nails, great for pallet repair. They will also cut composite materials such as plastic, pipe and carbon steel. Ideally suited for materials that are 3.2mm and thicker. Suitable for use with most all-purpose saws (pin fitting, manual or quick-release).Pack of 5 Faithfull S922HF Bi-Metal Sabre Saw Blades Demolition 150mm 10 TPI
