Blades

436 products


  • Last stock! Starrett Bu310Dt-5 Wood Cutting Jigsaw Blades Pack Of 5

    Starrett Starrett Bu310Dt-5 Wood Cutting Jigsaw Blades Pack Of 5

    5 in stock

    The Starrett BU310DT-5 Wood Cutting Jigsaw Blades with Unified Shank™. They will fit in virtually all jigsaw machines. These blades feature 170% more weld contact area than standard bi metal blades through the Unique™ solid state diffusion bonding process. This ensures exceptionally strong teeth, combined with the multiple cutting edges and split chip advantage, ensure that these blades typically last 25% longer than directly competing products. Supplied as a pack of 5. Specification Length: 75mm.Width: 7.5mm.Thickness: 1.3mm.TPI: 10.Tooth: Ground.Set: Tapered, Downstroke Cut. Length dimension references tooth bearing section of the blades, the total length including shank is approximately 25mm longer.

    5 in stock

    £13.49

  • DEWALT Dt8481 Bandsaw Blade 12Mm General Purpose

    Dewalt DEWALT Dt8481 Bandsaw Blade 12Mm General Purpose

    20 in stock

    Bandsaw Blade for general purpose rips and cross-cuts in wood and wood composites.The specially hardened teeth maintain an ultra sharp edge giving an excellent finish to the work.To fit DEWALT DW738 and DW739 Bandsaws. Blade Length: 2,095mm.Blade Width: 12.0mm.Tooth Pitch: 4.2mm.

    20 in stock

    £29.49

  • DEWALT Xpc Hcs Wood Jigsaw Blades Pack Of 5 T101D

    Dewalt DEWALT Xpc Hcs Wood Jigsaw Blades Pack Of 5 T101D

    20 in stock

    The DEWALT XPC Jigsaw blades have a optimised tooth angle which provides long life and clean tear-free cuts at high speeds in all wood materials. With a thicker blade body, increased taper angle and optimised tooth geometry for greater accuracy and control of cut. They have a slim narrow angled tooth design for clean cutting with less material breakout. The Plunge Point™ tip allows for easy plunge cutting into all wood and wood substitute materials. Optimum tooth geometry provides increased blade and tooth strength and premium steel body for longer blade cutting life. Larger deeper gullets between teeth for easier wood chip removal and faster cutting. For use in hard and soft woods including laminates, plywood, chipboard and plastics.The DEWALT DT2209-QZ (T101D) XPC HCS Wood Jigsaw Blades provide clean and fast straight cuts in wood, chipboard and plastics.

    20 in stock

    £10.99

  • Last stock! DEWALT Series 60 Circular Saw Blade 250 X 30Mm X 40T

    Dewalt DEWALT Series 60 Circular Saw Blade 250 X 30Mm X 40T

    2 in stock

    The DEWALT Series 60 Extreme Circular Saw Blade with laser cut expansion slots that help to reduce vibration and noise. The extra large sub micro grain carbide teeth remain sharper for much longer and can be resharpened up to 20 times. This stationary circular saw blade range can be used for cutting in natural wood, plywood, laminates, particleboard and MDF. Ideal for both table and mitre saws.The DEWALT DT4322 Series 60 Circular Saw Blade has the following specification: Finish: General Purpose.Blade Diameter: 250mm.Bore Size: 30mm.Tooth Count: 40.Plate Thickness: 2.2mm.Kerf Thickness: 3.0mm.Grind: ATB.Rake Angle: +10°.

    2 in stock

    £79.99

  • IRWIN U118A Jigsaw Blades Metal Cutting Pack Of 5

    Irwin IRWIN U118A Jigsaw Blades Metal Cutting Pack Of 5

    15 in stock

    Irwin Jigsaw Metal Cutting Blades are made from fully hardened high speed steel for use in metal, aluminum, and no-ferrous metal. HSS milled teeth for a longer life and fast, even cuts in metal. Straight cuts in metal, non-ferrous metal, aluminium, sheet metal, 1.5-3 mm (1/16Inch -1/8in). Length: 92mm. Pitch: 24 Precise Cut. Supplied in a pack of 5.

    15 in stock

    £6.99

  • Last stock! IRWIN U118G Jigsaw Blades Metal Cutting Pack Of 5

    Irwin IRWIN U118G Jigsaw Blades Metal Cutting Pack Of 5

    5 in stock

    Irwin Jigsaw Metal Cutting Blades are made from fully hardened high speed steel for use in metal, aluminum, and no-ferrous metal. HSS milled teeth for a longer life and fast, even cuts in thin and thick meta metal. Straight cuts in thin metal, non-ferrous metal, sheet metal, aluminium 0.2-1 mm (1/64Inch -3/64in). Length: 92mm. Pitch: 36 Precise Cut. Supplied in a pack of 5.

    5 in stock

    £6.99

  • IRWIN U111C Jigsaw Blades Wood Cutting Pack Of 5

    Irwin IRWIN U111C Jigsaw Blades Wood Cutting Pack Of 5

    Irwin Jigsaw Wood Cutting Blades made from carbon steel for use in softer materials such as wood, laminated chipboard, and plastics.Universal shank with 3 sided, fleam ground teeth for fast cut and clean finishes in all wood applications. Fast, coarse cuts in hard and soft wood, plastics 5-60 mm (7/32Inch -2 3/8in).Length: 100mm.Pitch: 8 Fast Cut.Supplied in packs of 5.

    £5.99

  • Last stock!

    Dewalt DEWALT Extreme Pcd Fibre Cement Saw Blade 250 X 30Mm X 12T

    5 in stock

    The DEWALT Extreme Cement Saw Blade features synthetic PCD (Polycrystalline Diamond) tipped teeth. These PCD coated teeth provide 100% longer life in fibre cement than TCT tipped blades. The laser cut blade features anti-vibration body slots and precision ground tips. The blade design also helps to reduce dust production when cutting fibre cement materials. Suitable for cutting a range of materials including fibre cement board, laminate/pre finished flooring, MDF, plywood, etc.This DEWALT Extreme PCD Fibre Cement Saw Blade has the following specification: Blade Diameter: 250mm.Bore Size: 30mm.Tooth Count: 12.Kerf Thickness: 2.2mm.Plate Thickness: 1.6mm.Grind: FTOP.Rake Angle: 12°.

    5 in stock

    £138.49

  • Starrett Bu424-5 Metal Cutting Jigsaw Blades Pack Of 5

    Starrett Starrett Bu424-5 Metal Cutting Jigsaw Blades Pack Of 5

    20 in stock

    The Starrett BU424-5 ;Metal Cutting Jigsaw Blades with Unified Shank™ will fit virtually all jigsaw machines. These blades feature 170% more weld contact area than standard bi-metal blades through the Unique™ solid state diffusion bonding process. This ensures exceptionally strong teeth, combined with the multiple cutting edges and split chip advantage, ensure that these blades typically last 25% longer than directly competing products. Supplied in a pack of 5. Specification Length: 100mm.Width: 9.5mm.Thickness: 1mm.TPI: 24.Tooth: Regular.Set: Wavy. Length dimension references tooth bearing section of the blades, the total length including shank is approximately 25mm longer.

    20 in stock

    £11.49

  • Last stock! Evolution Aluminium Cutting Circular Saw Blade 210 x 25.4mm x 60T

    Evolution Evolution Aluminium Cutting Circular Saw Blade 210 x 25.4mm x 60T

    4 in stock

    This Evolution Aluminium Cutting Circular Saw Blade has the following specification: Diameter: 210mmBore: 25.4mmTeeth: 60Kerf: 2.4mmMax. Speed: 3,900/rpm

    4 in stock

    £88.49

  • Faithfull Sabre Saw Blade Set, 10 Piece

    Faithfull Faithfull Sabre Saw Blade Set, 10 Piece

    The Faithfull Sabre Saw Blade Set contains an assortment of high-quality blades manufactured for precision and stability when cutting. Their design and tooth geometry vary with regard to speed and the cutting application in which they are used for.Suitable for use with most all-purpose saws (pin fitting, manual or quick-release). The set are supplied in a handy storage case which can safely store a large quantity of sabre saw blades and can extend to accommodate larger blade lengths. Contains: 2 x S617K Sabre Saw Blades 150mm 3 TPI. Ideal for coarse wood, free of nails (20-100mm) and pruning green wood (dia. up to 100mm). Especially for curved cuts/plunge cuts. 2 x S922BF Sabre Saw Blades 150mm 14 TPI. Ideal for thick sheet metal (3-8mm), solid pipes/profiles (dia.10-100mm). 2 x S918E Sabre Saw Blades 150mm 18 TPI. Ideal for thin sheet metal (2-5mm) fine, closed pipes/profiles (dia.5-100mm). 2 x S611DF Bi-Metal Sabre Saw Blades 150mm 6 TPI. Ideal for use on wood, chipboard, wood with nails/metal, window frames and fibreglass/epoxy up to 100mm thick. 2 x S922HF Bi-Metal Sabre Saw Blades 150mm 10 TPI. Ideal for use on wood, plastic, non-ferrous metals and are perfect for wood embedded with nails - great for pallet repair. They will also cut composite materials such as plastic, pipe and carbon steel. Ideally suited for materials that are 3.2mm and thicker. Specifications: Length: 150mm.Pack Quantity: 10 piece.

    £24.49

  • Last stock! Starrett SB6-A Reciprocating Blade Kit (Pack 5)

    Starrett Starrett SB6-A Reciprocating Blade Kit (Pack 5)

    4 in stock

    The Starrett SB6-A Reciprocating Blade Kit contains a selection of unified shank 3X POWER Bi-Metal reciprocating blades. They provide up to three times the life and increased cutting rates compared to our previous line, setting a new level for performance and value on the market. With an optimised tooth pitch for a reduction in vibration, offering cleaner cuts and less fatigue. They are unbreakable; providing safety and reliability. Contains: 1 x B66 Wood Cutting Blade 152 x 19 x 0.89mm, 6 TPI1 x B610 Multipurpose Blade 152 x 19 x 0.90mm, 10 TPI1 x B614 Metal Cutting Blade 152 x 19 x 0.90mm, 14 TPI1 x B618 Metal Cutting Blade 152 x 19 x 0.90mm, 18 TPI1 x B624 Metal Cutting Blade 152 x 19 x 0.90mm, 24 TPI

    4 in stock

    £25.99

  • DEWALT Flexvolt Xr Circular Saw Blade 190 X 30Mm X 60T

    Dewalt DEWALT Flexvolt Xr Circular Saw Blade 190 X 30Mm X 60T

    20 in stock

    DEWALT FlexVolt XR Circular Saw Blade with fine grade carbide tips and an ATB+R tooth configuration. This helps to reduce the cutting force required and offer increased efficiency for maximum cordless run time. The ultra-thin kerf design and optimised face shear provide fast, smooth cuts. The body features expansion slots for low vibration and reduced noise. Nail tough blade, perfect for cutting through nail embedded wood. Suited to the cutting of large and thick timbers and various other site materials. Optimised for use with FlexVolt Power Tools.This DEWALT FlexVolt XR Circular Saw Blade has the following specification: Application: Ripping, Crosscutting.Finish: Fine.Blade Diameter: 190mm.Bore: 30mm.Teeth: 60.Kerf Thickness: 1.55mm.Plate Thickness: 0.99mm.Grind: ATB+R.Rake Angle: 25°.

    20 in stock

    £50.49

  • IRWIN Construction Circular Saw Blade 210 X 30Mm X 40T Atb

    Irwin IRWIN Construction Circular Saw Blade 210 X 30Mm X 40T Atb

    20 in stock

    The Irwin Construction Circular Saw Blade with expansion slots which dissipate heat and prevent warping. Its construction grade tungsten carbide tips retain their edge, and the plate is fully hardened for durability. The blade features alternate top bevel tooth grind (ATB) for cross cutting and ripping in all woods. Its corrosion resistant coating provides longer quality performance. Suitable for use with handheld corded machines.This IRWIN Construction Circular Saw Blade has the following specification: Blade Diameter: 210mm.Bore: 30mm.Teeth: 40.Kerf Thickness: 2.5mm.Tooth Config: ATB.

    20 in stock

    £28.99

  • DEWALT Flexvolt Xr Circular Saw Blade 190 X 30Mm X 24T

    Dewalt DEWALT Flexvolt Xr Circular Saw Blade 190 X 30Mm X 24T

    20 in stock

    DEWALT FlexVolt XR Circular Saw Blade with fine grade carbide tips and an ATB+R tooth configuration. This helps to reduce the cutting force required and offer increased efficiency for maximum cordless run time. The ultra-thin kerf design and optimised face shear provide fast, smooth cuts. The body features expansion slots for low vibration and reduced noise. Nail tough blade, perfect for cutting through nail embedded wood. Suited to the cutting of large and thick timbers and various other site materials. Optimised for use with FlexVolt Power Tools.This DEWALT FlexVolt XR Circular Saw Blade has the following specification: Application: Ripping.Finish: General Purpose.Blade Diameter: 190mm.Bore: 30mm.Teeth: 24.Kerf Thickness: 1.55mm.Plate Thickness: 0.99mm.Grind: ATB+R.Rake Angle: 25°.

    20 in stock

    £32.49

  • DEWALT Bi Metal Sabre Blade For Plastic & Pipes 152Mm Pack Of 5

    Dewalt DEWALT Bi Metal Sabre Blade For Plastic & Pipes 152Mm Pack Of 5

    20 in stock

    The DEWALT bi-metal construction blades combine HCS and HSS for increased flexibility and durability. These reciprocating blades are ideal for general purpose use in wood, metal, tough plastic and sandwich materials. The Universal shank fits all major brands including DEWALT, Bosch, Hitachi, Flex, Makita, Metabo and Skil.The DEWALT DEWDT2348QZ reciprocating blades are ideal for use in tough plastics, sandwich material and pipes from 3-12mm thick.

    20 in stock

    £13.99

  • Last stock! IRWIN Construction Circular Saw Blade 180 X 30Mm X 24T Atb

    Irwin IRWIN Construction Circular Saw Blade 180 X 30Mm X 24T Atb

    3 in stock

    The Irwin Construction Circular Saw Blade with expansion slots which dissipate heat and prevent warping. Its construction grade tungsten carbide tips retain their edge, and the plate is fully hardened for durability. The blade features alternate top bevel tooth grind (ATB) for cross cutting and ripping in all woods. Its corrosion resistant coating provides longer quality performance. Suitable for use with handheld corded machines.This IRWIN Construction Circular Saw Blade has the following specification: Blade Diameter: 180mm.Bore: 30mm.Teeth: 24.Kerf Thickness: 2.5mm.Tooth Config: ATB.

    3 in stock

    £17.99

  • Last stock! DEWALT Series 60 Circular Saw Blade 250 X 30Mm X 30T

    Dewalt DEWALT Series 60 Circular Saw Blade 250 X 30Mm X 30T

    5 in stock

    The DEWALT Series 60 Extreme Circular Saw Blade with laser cut expansion slots that help to reduce vibration and noise. The extra large sub micro grain carbide teeth remain sharper for much longer and can be resharpened up to 20 times. This stationary circular saw blade range can be used for cutting in natural wood, plywood, laminates, particleboard and MDF. Ideal for both table and mitre saws.The DEWALT DT4321 Series 60 Circular Saw Blade has the following specification: Finish: Fast Rip.Blade Diameter: 250mm.Bore Size: 30mm.Tooth Count: 30.Plate Thickness: 3.0mm.Kerf Thickness: 2.2mm.Grind: ATB.Rake Angle: +10°.

    5 in stock

    £70.49

  • Last stock! DEWALT Extreme Runtime Flexvolt Mitre Saw Blade 250 X 30Mm X 60T

    Dewalt DEWALT Extreme Runtime Flexvolt Mitre Saw Blade 250 X 30Mm X 60T

    5 in stock

    This DEWALT Extreme Runtime FlexVolt Blade has been specially designed for use with the DEWALT FlexVolt Mitre Saw. The sub-micron grade carbide teeth provide superb cutting performance and excellent, smooth chip removal. Ideal for cutting large, thick timbers and various other site materials. These FlexVolt blades offer the trade about twice the working life of standard alternative blades.This DEWALT Extreme Runtime FlexVolt Mitre Saw Blade has the following specification: Diameter: 250mmBore: 30mmTooth Count: 60

    5 in stock

    £78.99

  • Last stock! DEWALT Series 40 Circular Saw Blade 184 X 16Mm X 28T

    Dewalt DEWALT Series 40 Circular Saw Blade 184 X 16Mm X 28T

    5 in stock

    The DEWALT Series 40 Circular Saw Blade is designed for use in stationary saws. With large, general purpose K10 carbide tips for cutting wood and non-ferrous metals. They can be resharpened up to 15 times. High precision laser manufacture ensures a flat blade body and engineered expansion slots prevent blade overheating and warping. These blades are designed with Alternate Top Bevel (ATB) teeth to reduce splinters.The DEWALT DEWDT4031QZ circular saw blade has the following specifications: Finish: General Purpose.Blade Diameter: 184mm.Bore Size: 16mm.Tooth Count: 28.Plate Thickness: 1.7mm.Kerf Thickness: 2.6mm.Grind Geometry: ATB Rake Angle: +25°.

    5 in stock

    £50.49

  • DEWALT Hcs Progressor Tooth Jigsaw Blades Pack Of 5 T234X

    Dewalt DEWALT Hcs Progressor Tooth Jigsaw Blades Pack Of 5 T234X

    15 in stock

    The DEWALT HCS Progressor Tooth Jigsaw Blades are ideal for fast cutting of different material thicknesses with a single blade. The blades are made from high carbon steel for increased durability with a T shank fitting for all T-shank Jigsaws. The PROGRESSOR Blade can be used for woods, chipboard, plywood and fibre boards up to 65mm thick.1 x Pack of 5 DEWALT DT2057 HCS Progressor Tooth Jigsaw Blades T234X

    15 in stock

    £8.99

  • Last stock! Panasonic EY9SXMJ4E10 Wood Bandsaw Blade 730 x 13mm x 18 TPI

    Panasonic Panasonic EY9SXMJ4E10 Wood Bandsaw Blade 730 x 13mm x 18 TPI

    2 in stock

    The Panasonic EY9SXMJ4E10 Replacement Blade is tough and flexible, with a lifespan of approximately 600 cuts. Compatible with the Panasonic EY45A5X57 14.4V/18V Portable Cordless Band Saw Skin.

    2 in stock

    £71.49

  • Faithfull Tct Cordless Trimsaw Blade 136 X 10Mm X 24T Pos

    Faithfull Faithfull Tct Cordless Trimsaw Blade 136 X 10Mm X 24T Pos

    15 in stock

    Faithfull TCT Cordless Trimsaw Blade with Tungsten Carbide Tips and a narrow 1.6mm kerf for improved battery performance and laser cut expansion slots to reduce heat build-up. Specially designed for use with hand-held cordless saws. This range includes blades for fast cutting and fine finishing on all types of timber and man-made boards.This Faithfull TCT Cordless Trimsaw Blade has the folowing specification: Application: Fast Rip.Blade Diameter: 136mm.Bore: 10mm.Teeth: 24.Rake: POS.

    15 in stock

    £15.99

  • Faithfull Tct Circular Saw Blade Zero Degree 250 X 30Mm X 80T

    Faithfull Faithfull Tct Circular Saw Blade Zero Degree 250 X 30Mm X 80T

    20 in stock

    Faithfull Professional TCT Circular Saw Blade with 7mm Tungsten Carbide Tipped teeth to ensure a long working life and accuracy of cut. Each blade has laser cut expansion slots to improve their performance by reducing heat build up. Specially manufactured for use with mitre saws and radial arm saws. For safety purposes, a zero degree blade must be used to avoid kickback when cutting timber by means of lowering the blade onto the workpiece.This Faithfull TCT Circular Saw Blade has the following specification: Blade Diameter: 250mm.Bore: 30mm.Teeth: 80.Bush: 25 & 16mm.Rake: ZERO.

    20 in stock

    £57.99

Login

Forgot your password?

Don't have an account yet?
Create account