The RST. Tile Grouter Float is designed for spreading grout in narrow areas. Its non-mark white surface has rounded corners and square to allow different spreading techniques. A dense rubber pad give the tool rigidity. Fitted with a double hang handle.
HG Grout Cleaner removes stubborn dirt from grout between wall and floor tiles. The perfect tile grout cleaner for the bathroom or kitchen. Restores the grout to its original colour.
The Airmaster PTC Downflow Heater is designed for use in bathrooms. Its special air outlet is designed to deliver a downward flow of heat whilst the powerful 2.0Kw heat output ensures fast heating. The adjustable thermostat ensures efficient performance. It has two heat settings 1,400/2,000W with 1-8 hour timer. This stylish heater features a thermoplastic body and is suitable for wall mounting. It also features overheat protection and touch sensitive controls. Comes complete with a remote control. Specifications: Input Voltage: 220-240V (50Hz).Output Rating: 1,400W/2,000W.Dimensions: 300 x 130mm.IP Rating: IPX2.Cable Length: 1.53m.
Keep your bathroom clean and free from damp with this efficient bathroom fan from Xpelair. Compact and easy to install, this fan will help to extract steam and damp air from your bathroom, helping to keep your room fresh and free of mildew. With a maximum airflow of 21 litres per second, this type of bathroom fan is typically wired to the light switch, so it turns on and off in synchronisation with your light. The front cover clips and unclips for easy access and cleaning, and the motor is lubricated for life. Always hire a qualified professional to install your fan.
_Manufactured from mixed materials
_Compact and easy to install
_Single speed fan: Speed 1 - 76 m_/h
_Maximum air flow 21 litres per second
_Lubricated for life motor
Ghost Air Movement Technology designed to deliver near-silent running Box Contains1 x Extractor Fan 1 x 300mm telescopic wall tube 1 x External Grille 1 x Screws and Raw Plugs 1 x Instruction Manual
_Ghost Air Movement Technology designed to deliver near-silent running
_Twin speed extractor fan delivering selected extraction rate of 54 or 76 meters per hour (15 or 21 litres per second)
_Simply Silent noise levels of 22 or 34 dBA at 3m (independently tested by ISVR)
_Wall kit with 300mm of telescopic wall tube and external grille
_Designed for use in bathrooms and shower rooms, complies with building regulations Part F and L
4" (100MM) Bathroom Extactor Fan - StandardBox Contains4" (100mm) Extractor Fan;300mm Telescopic Ducting - 100mm diameter;External Grille;Window gaskets and seals;Window spacer;Raw plugs and screws;Instruction manual;
_4" (100MM) Bathroom Extactor Fan - Standard
_Supplied with wall/window kit for window, wall and ceiling applications
_Extract Performance: 76m3 per hour, Noise Level 35 dBA @ 3 Meters
_Standard operation, typically switches on/off with light switch
_IPX5 Rated, BEAB Approved and conforms to Builing Regulations Part F1
The Simply Silent C4HTSR Humidistat / Timer extract fan eliminates humidity, condensation and odour to improve air quality in bathrooms, shower rooms, cloakrooms and toilets.
_2 speed options, 15 or 21 l/s, selected at installation for application
_6.3Ê/ 7.0 watt power consumptionÊusing AC motor
_Supplied with both circular and square baffles for preferred style finish
_Ghost Airmovement technology for near silent running
_IPX4 rated and a 2-year UK guarantee
Ghost Air Movement Technology designed to deliver near-silent running Box Contains1 x Extractor Fan1 x 300mm telescopic wall tube1 x External Grille1 x Screws and Raw Plugs1 x Instruction Manual
_Ghost Air Movement Technology designed to deliver near-silent running
_Twin speed extractor fan delivering selected extraction rate of 54 or 76 meters per hour (15 or 21 litres per second)
_Simply Silent noise levels of 22 or 34 dBA at 3m (independently tested by ISVR)
_Wall kit with 300mm of telescopic wall tube and external grille
_Designed for use in bathrooms and shower rooms, complies with building regulations Part F and L
The Simply Silent CV4SR Humidistat / Timer is a continuously running (dMEV) extract fan. It delivers a constant volume of extracted air to eliminate humidity, condensation and mould growth in bathrooms, shower rooms, kitchens and toilets.
_selectable bathroom and kitchen airflows, with 3 speed options for each
_Features Xpelair's intelligent adaptiflow sensing technology which delivers constant volume performance due to a unique sensor housed within the duct. The sensor calculates and records the airflow of the fan and adapts the fan speed intuitively in accordance with changes in airflow to maintain the required fan speed.
_Supplied with both circular and square baffles for preferred style finish
_Ghost Airmovement technology for near silent running
_IPX4 rated and a 5-year UK guarantee
The Simply Silent C4SR Standard extract fan eliminates humidity, condensation and odour to improve air quality in bathrooms, shower rooms, cloakrooms and toilets.
_2 speed options, 15 or 21 l/s, selected at installation for application
_6.3Ê/ 7.0 watt power consumptionÊusing AC motor
_Supplied with both circular and square baffles for preferred style finish
_Ghost Airmovement technology for near silent running
_IPX4 rated and a 2-year UK guarantee
Model: 434446A ¯100mm, axial, inline, shower fan kit with electronic overrun timer adjustable from 5 to 30 minutes. The factory setting is 15 minutes. Kit Includes Fan, two grilles, fixings and 3m flexible PVC ducting Quiet operation Timer model (5-30 minutes) Technical Specification IP44 rated. CE marked in accordance with all the relevant EEC Harmonised Directives. Double insulated, class II motor fitted with Thermal Protection. Airflow Installed: 82m3/hr installed Airflow, fan only, free air: 108m3/hr Technical Data: Rated Voltage 220-240v-50Hz Rated Wattage 14W Noise Level 37dB(A) Grille Dimensions Height: 170mm Width: 170mm Length: 60mm Dimensions Height-100mm Width-100mm Depth-137mm
_Full Kit comprising of Inline Fan, 2 Grilles, 3 metres of Flexiduct and Fixings
_Airvent Brand (made at Vent Axia)
_Timer Model - Can be wired so Fan stays on when light switched off
_Requires: Premanent Live, Switched Live, Neutral
_Double Insulated: No Earth Required
Megaman Tego Down Light 5W IP65 DimmableModel: 519030This IP65 rated, weatherproof, fully fire rated dimmable LED downlight is perfect for both domestic and commercial lighting applications. This premium branded Megaman fitting features colour adjustable colour temperatures, meaning you can set the mood from a cozy soft warm white light, to an active crisp cool white light (3000-4000k) Complete with fixed white bezel this fitting is fully fire rated for 30/60/90 minutes. 73mm Cut-out.Megaman Tego Down Light Features:¥Colour - Warm white or cool white (3000-4000K switchable)¥Diameter - 70mm¥Height - 85mm¥Volts - 240v¥Watts - 5w¥Lumens - 420¥30000 lifetime¥Fire Rated - IP20/IP65¥Beam Angle - 36 degrees¥100% to 10% Linear Dimming
Fan has thermally activated shutters which automatically open/close slowly once the fan has been switched on/off. For wall, ceiling or window mounting (wall and window kits available to buy separate). Axial fans are designed to move air over short distances i.e up to 2meters in length. Front grille measures approx 6" x 6" round spigot to rear approx diameter 4"
Airvent 459294A 4'' 100mm White Bathroom Fan with Humidistat - Made at Vent Axia
_Mains voltage 230/240V AC 50Hz
_Extraction rate 21 litres per second, 75 cubic metres per hour
_Power consumption: 16watts, Sound output: only 30dB(A) @ 3m
_Pullcord override
_IP44 rated, CE approved
Bathroom / Toilet Extractor Fan with over-run timer
_Mains 230/240V AC. Extractor fan suitable for small bathroom situation.
_Timer over-run continues to run fan after room light is switched off (permanent live required)
_22 litres per second / 80 cubic metres per hour extract rate. 15 watts power consumption.
_Sound output 48dB(A) @ 3m. IP22
_156mm wide x 156mm high x 48mm deep. 99mm spigot that extends for 53mm
The McAlpine Fyne Bath filler is a contemporary tap range featuring a stylish lever design ideal for a modern household. It has an exceptionally easy functionality and has a great design to suit any bathroom.
• Complete with Tap Tails
• Chrome 3+
• 15 Year Product Guarantee
• Top Mount Installation
• WRAS Approved
• Acid salt spray tested to 48hr
• Minimum Flow Rate: 0.2
• Maximum Flow Rate: 5
• Spout Height (mm): 61
• Spout Length (mm): 110
The McAlpine Kelvin Bath Filler boasts a unique design for a contemporary effect. Finished in chrome with separate controls for hot and cold water.
• Complete with Tap Tails
• Chrome 3+
• 15 Year Product Guarantee
• Top Mount Installation
• WRAS Approved
• Acid salt spray tested to 48hr
• Minimum Flow Rate: 0.2
• Maximum Flow Rate: 5
• Spout Height (mm): 75
• Spout Length (mm): 115
The McAlpine 1.50 Top Access Bath Trap+O/F in Matt Black is a premium-quality plumbing component that is designed to provide efficient and effective waste management for a variety of applications. With its sleek and modern design, this bath trap adds a touch of elegance to any bathroom or other residential or commercial environment.
Constructed from high-quality materials, this bath trap is built to last, ensuring long-lasting performance and durability. Its matt black finish not only gives it a stylish appearance but also makes it resistant to corrosion and wear, ensuring that it remains looking new for years to come.
Featuring a 1.50-inch diameter, this bath trap is suitable for use with a wide range of baths and other plumbing fixtures. Its top access design allows for easy maintenance and cleaning, while its overflow feature helps to prevent water damage and flooding.
Whether you're renovating a bathroom or working on a commercial project, the McAlpine 1.50 Top Access Bath Trap+O/F in Matt Black is the perfect choice. With its high-quality construction, efficient waste management capabilities, and stylish design, this bath trap is an essential component for any plumbing project.
・ Top access design: The McAlpine 1.50 Top Access Bath Trap+O/F in Matt Black features a top access design, which allows for easy access and cleaning of the trap without having to remove the entire bath.
・ Overflow function: This bath trap comes with an overflow function, which prevents water from overflowing and damaging your bathroom floor
・ Matt black finish: The matt black finish on this bath trap adds a touch of style to your bathroom, complementing a wide range of decor styles.
・ Durable construction: Made from high-quality materials, this bath trap is built to last and can withstand the rigors of daily use.
・ Easy to install: This bath trap is designed to be easy to install, making it a great option for both DIY enthusiasts and professional plumbers.
The McAlpine HC2650UK-FIL is a chrome-plated brass bath filler and overflow kit designed for use with standard bath installations. The kit includes a 650mm long braided hose with a 90° bend, a flexible overflow tube, a chrome-plated brass waste outlet with a 70mm flange and a removable top access spring-loaded mushroom plug, and a 1½" x 50mm water seal swivel bath trap with a universal outlet.
The bath filler and overflow kit is made from high-quality materials, ensuring that it is durable and long-lasting. The chrome-plated brass finish provides a stylish and modern look that complements most bathroom décor.
The 650mm long braided hose with a 90° bend provides flexibility and ease of installation, allowing for easy connection to the water supply. The flexible overflow tube helps to prevent blockages and ensures that water flows smoothly.
The chrome-plated brass waste outlet with a 70mm flange and removable top access spring-loaded mushroom plug provides a reliable and easy-to-use solution for closing the waste outlet. The 1½" x 50mm water seal swivel bath trap with a universal outlet helps to prevent odors from entering the bathroom and provides a secure and reliable seal.
Overall, the McAlpine HC2650UK-FIL is a high-quality bath filler and overflow kit that provides a reliable and efficient solution for standard bath installations. Its chrome-plated brass finish, flexible overflow tube, and removable top access spring-loaded mushroom plug make it a popular choice for many bathroom installations, providing a combination of functionality and style.
・ Available in 575mm or 1m Overflow lengths
・ 1½" Outlet
・ Compact filler design (70mm x 25mm)
・ Will fit overflow hole size 46mm-65mm and suitable for curved baths
・ Industry leading flow rates (0.5 bar=33l/min, 1 bar=44l/min, 2 bar=57l/min)
The McAlpine BSW10PC Centre Pin Bath Waste is a plumbing component used for draining water from a bathtub. It features a 70mm stainless steel flange and a black PVC plug, providing a durable and long-lasting design that is both functional and aesthetically pleasing.
The centre pin design allows for easy opening and closing of the plug, ensuring efficient drainage and preventing water from pooling in the bathtub. The stainless steel flange adds a modern look to the plumbing system, while the black PVC plug provides a sleek and stylish finish.
The McAlpine BSW10PC Centre Pin Bath Waste is easy to install, with a simple push-fit mechanism that ensures a secure and watertight seal. It is suitable for use with a variety of bathtubs, making it a versatile solution for a range of plumbing applications.
Overall, the McAlpine BSW10PC Centre Pin Bath Waste is a reliable and effective plumbing component that provides efficient drainage and a modern look to the bathtub. It is easy to install and maintain, and is designed to withstand the demands of regular use.
・ Available in 1¼" or 1½¿
・ Black PVC plug
・ Available with or without CP chain
・ Centre pin dry fixing connection has the advantage of a quick, simple and neat installation affording a saving in material and labour costs
・ The polished stainless steel flange eliminates the problem of chrome plating deterioration
The McAlpine HC2650UK 50mm Water Seal Swivel Bath Trap and Overflow Assembly is a plumbing component designed for use in bath waste management. It is typically used to connect the bath waste outlet to a drainage system, while also providing overflow protection.
The HC2650UK assembly features a 50mm water seal that helps prevent the escape of foul odors and gases from the drainage system. The swivel bath trap allows for easy installation and maintenance, while the overflow assembly provides protection against overflow incidents.
The top access chrome plated brass waste and spring loaded mushroom plug provide a stylish and practical solution for controlling the bath waste flow. The waste and plug are easily accessible for cleaning and maintenance purposes.
The McAlpine HC2650UK 50mm Water Seal Swivel Bath Trap and Overflow Assembly is made from high-quality materials to ensure durability and long-lasting performance. It is designed to be easy to install and maintain, with a removable trap for easy cleaning.
Overall, the McAlpine HC2650UK 50mm Water Seal Swivel Bath Trap and Overflow Assembly is a reliable and effective solution for bath waste and overflow management. It provides a high-quality, durable design that helps prevent unpleasant odors and gases from escaping into the surrounding environment, while also being stylish and easy to install and maintain.
・ 50mm Water Seal
・ 1½" Universal Compression Outlet suits all plastic, copper and lead pipe
・ Outlet can be swiveled to make installation easier
・ Matching Chrome Plated Brass Mushroom plug and overflow face
・ Mushroom Plug is spring loaded and top access for easy cleaning
The McAlpine SMP10 50mm Water Seal with 1½" Universal Outlet Bath Trap is a plumbing component designed for use in bath waste management. It is typically used to connect the bath waste outlet to a drainage system.
The SMP10 trap features a 50mm water seal that helps prevent the escape of foul odors and gases from the drainage system. The universal outlet is compatible with most standard bath wastes, making it easy to install in most bath systems.
The McAlpine SMP10 Bath Trap is made from high-quality materials to ensure durability and long-lasting performance. It is designed to be easy to install and maintain, with a removable trap for easy cleaning.
Overall, the McAlpine SMP10 50mm Water Seal with 1½" Universal Outlet Bath Trap is a reliable and effective solution for bath waste management. It provides a high-quality, durable design that helps prevent unpleasant odors and gases from escaping into the surrounding environment, while also being compatible with most standard bath wastes and being easy to install and maintain.
・ 50mm Water Seal
・ 1½" Universal Compression Outlet suits all plastic, copper and lead pipe
・ Suitable for Use with McAlpine Bath Wastes
・ Manufactured in polypropylene
・ Conforms to BS EN 274-1:2002
The McAlpine SM10E 60mm Water Seal with 1½" Multifit Outlet Bath Trap is a plumbing component designed for use in bath waste management. It is typically used to connect the bath waste outlet to a drainage system.
The SM10E trap features an extended body that allows for a higher water seal to prevent the escape of foul odors and gases from the drainage system. The 1½" Multifit Outlet is compatible with most standard bath wastes, making it easy to install in most bath systems.
The McAlpine SM10E Bath Trap is made from high-quality materials to ensure durability and long-lasting performance. It is designed to be easy to install and maintain, with a removable trap for easy cleaning.
Overall, the McAlpine SM10E 60mm Water Seal with 1½" Multifit Outlet Bath Trap is a reliable and effective solution for bath waste management. It provides a high-quality, durable design that helps prevent unpleasant odors and gases from escaping into the surrounding environment, while also being compatible with most standard bath wastes and being easy to install and maintain. The extended body design of the trap provides additional protection against odors and gases.
・ 60mm Water Seal
・ 1½" Multifit Compression Outlet suits all plastic, copper and lead pipe
・ Suitable for Use with McAlpine Bath Wastes
・ Extended Body
・ Manufactured in polypropylene
The McAlpine SM10 50mm Water Seal with 1½" Multifit Outlet Bath Trap with Cleaning Eye is a plumbing component designed for use in bath waste management. It is typically used to connect the bath waste outlet to a drainage system.
The SM10 trap features a water seal that helps prevent the escape of foul odors and gases from the drainage system. It also has a cleaning eye that allows for easy maintenance and cleaning of the trap.
The 1½" Multifit Outlet is compatible with most standard bath wastes, making it easy to install in most bath systems.
The McAlpine SM10 Bath Trap is made from high-quality materials to ensure durability and long-lasting performance. It is designed to be easy to install and maintain, with a removable trap and cleaning eye for easy cleaning.
Overall, the McAlpine SM10 50mm Water Seal with 1½" Multifit Outlet Bath Trap with Cleaning Eye is a reliable and effective solution for bath waste management. It provides a high-quality, durable design that helps prevent unpleasant odors and gases from escaping into the surrounding environment, while also providing easy maintenance and cleaning.
・ 50mm Water Seal
・ 1½" Multifit Compression Outlet suits all plastic, copper and lead pipe
・ Suitable for Use with McAlpine Bath Wastes
・ Manufactured in polypropylene
・ Conforms to BS EN 274-1:2006
The McAlpine SM10V 50mm Water Seal Anti-Syphon (Silentrap): Extended Body with 1½" Multifit Outlet Bath Trap with Cleaning Eye is a plumbing component designed for use in bath waste management. It is typically used to connect the bath waste outlet to a drainage system.
The SM10V trap features a water seal that helps prevent the escape of foul odors and gases from the drainage system. It also features an anti-syphon (silentrap) device that prevents the water seal from being broken due to siphonage caused by the flow of water in the drainage system. This helps to ensure that the trap remains effective at all times.
The extended body of the SM10V trap is designed to accommodate deeper bath installations, while the cleaning eye allows for easy maintenance and cleaning of the trap.
The McAlpine SM10V Bath Trap is made from high-quality materials to ensure durability and long-lasting performance. It is designed to be easy to install and maintain, with a removable trap and cleaning eye for easy cleaning.
The 1½" Multifit Outlet is compatible with most standard bath wastes, making it easy to install in most bath systems.
Overall, the McAlpine SM10V 50mm Water Seal Anti-Syphon (Silentrap): Extended Body with 1½" Multifit Outlet Bath Trap with Cleaning Eye is a reliable and effective solution for bath waste management. It provides a high-quality, durable design that helps prevent unpleasant odors and gases from escaping into the surrounding environment, while also accommodating deeper bath installations and providing easy maintenance and cleaning.
・ 50mm Water Seal
・ 1½" Multifit Compression Outlet suits all plastic, copper and lead pipe
・ Anti-Syphon Valve neutralises negative syphonic pressure and eliminates gurgling
・ Suitable for Use with McAlpine Bath Wastes
・ Manufactured in polypropylene
The McAlpine SM10EV 60mm Water Seal Anti-Syphon (Silentrap) with 1½" Multifit Outlet Bath Trap is a plumbing component designed for use in bath waste management. It is typically used to connect the bath waste outlet to a drainage system.
The SM10EV trap features a water seal that helps prevent the escape of foul odors and gases from the drainage system. It also features an anti-syphon (silentrap) device that prevents the water seal from being broken due to siphonage caused by the flow of water in the drainage system. This helps to ensure that the trap remains effective at all times.
The McAlpine SM10EV Bath Trap is made from high-quality materials to ensure durability and long-lasting performance. It is designed to be easy to install and maintain, with a removable trap for easy cleaning.
The 1½" Multifit Outlet is compatible with most standard bath wastes, making it easy to install in most bath systems.
Overall, the McAlpine SM10EV 60mm Water Seal Anti-Syphon (Silentrap) with 1½" Multifit Outlet Bath Trap is a reliable and effective solution for bath waste management. It provides a high-quality, durable design that helps prevent unpleasant odors and gases from escaping into the surrounding environment, while also ensuring that the trap remains effective even under high-flow conditions.
・ 60mm Water Seal
・ 1½" Multfit Compression Outlet suits all plastic, copper and lead pipe
・ Anti-Syphon Valve neutralises negative syphonic pressure and eliminates gurgling
・ Suitable for Use with McAlpine Bath Wastes
・ Extended Body
The McAlpine CBWF70CB is a combined bath waste and overflow designed for use in baths. It features a chrome plated brass construction and has a 1½" diameter.
The waste and overflow are combined into a single unit, which makes installation easier and more efficient. The centre pin model has a 70mm chrome plated brass flange with a 60mm tail centre. The spring-loaded mushroom plug is used to prevent water from draining out of the bathtub, while the matching overflow cover plate is used to cover the overflow hole in the bathtub.
This bath waste and overflow unit is a durable and reliable option for anyone looking to install or replace a waste and overflow in their bathroom. The chrome plated brass construction ensures that it will last for years, while the spring-loaded mushroom plug and matching overflow cover plate provide a secure and professional finish.
・ 1½" BSP
・ Spring loaded mushroom plug
・ Matching Chrome Plated Brass overflow cover plate
・ 70mm Chrome Plated Brass flange
・ Flexible overflow tube has OD of 34mm
The McAlpine FBW2PC Bath Combined Waste and Overflow is a plumbing fitting designed for use in baths. It combines both the waste and overflow functions into a single unit, providing a simple and efficient solution for draining water from the bath.
The unit features a 70mm stainless steel flange that is designed to sit flush with the surface of the bath, providing a neat and tidy finish. It also has a chrome-plated overflow grating and a plug with a chrome-plated chain, adding a touch of style and elegance to the bath.
The McAlpine FBW2PC Bath Combined Waste and Overflow is made from high-quality materials, ensuring its durability and resistance to wear and tear. It is a reliable and efficient solution for draining water from the bath, and its compact size and simple design make it a popular choice for both residential and commercial applications.
Overall, the McAlpine FBW2PC Bath Combined Waste and Overflow is a practical and stylish plumbing fitting that provides a simple and efficient solution for draining water from a bath. Its high-quality materials and elegant design ensure long-lasting performance and reliable functionality in a wide range of plumbing applications.
・ Available in 1¼" and 1½" sizes
・ 70mm stainless steel flange
・ Chrome plated overflow grating
・ Black PVC plug and CP chain
・ Flexible overflow tube has OD of 25mm
The McAlpine Q10 19mm Water Seal Multifit Outlet Bath Trap is a plumbing component used to connect the waste pipe from a bath to the drainage system. The Q10 trap is designed to be installed below the bath and is commonly used in residential and commercial plumbing installations.
The Q10 bath trap features a 19mm water seal, which helps to prevent foul odours and gases from escaping from the drainage system and entering the living space. The water seal also helps to prevent blockages by trapping debris and preventing it from entering the drainage system.
The multifit outlet allows for easy connection to a range of waste pipe sizes and types, making it a versatile choice for a variety of plumbing applications. The trap also features a removable grid, which allows for easy cleaning and maintenance.
Overall, the McAlpine Q10 19mm Water Seal Multifit Outlet Bath Trap is a reliable and easy-to-use plumbing component that is suitable for use in a range of different plumbing installations. It is particularly useful in situations where space is limited, as its compact design takes up minimal space below the bath.
・ 19mm Water Seal
・ Multifit Compression Outlet suits all plastic, copper and lead pipe
・ Suitable for Use with McAlpine Bath Wastes
・ Manufactured in polypropylene
The McAlpine L10V 75mm Water Seal Anti-Syphon (Silentrap) with 1½" Multifit Outlet Bath Trap is a plumbing component used to connect the waste pipe from a bath to the drainage system. The L10V trap is designed to be installed below the bath and is commonly used in residential and commercial plumbing installations.
The L10V bath trap features a 75mm water seal and an anti-syphon valve, also known as a Silentrap, which is designed to prevent foul odours and gases from escaping from the drainage system and entering the living space. The anti-syphon valve works by preventing the siphoning action of the trap, which can occur when large volumes of water are drained from the bath or other fixtures. This helps to maintain the integrity of the water seal and prevent odours from entering the living space.
The 1½" multifit outlet allows for easy connection to a range of waste pipe sizes and types, making it a versatile choice for a variety of plumbing applications. The trap also features a removable grid, which allows for easy cleaning and maintenance.
Overall, the McAlpine L10V 75mm Water Seal Anti-Syphon (Silentrap) with 1½" Multifit Outlet Bath Trap is a reliable and effective plumbing component that is suitable for use in a range of different plumbing installations where preventing the escape of foul odours and gases is important.
・ 75mm Water Seal
・ 1½" Multifit Compression Outlet suits all plastic, copper and lead pipe
・ Anti-Syphon Valve neutralises negative syphonic pressure and eliminates gurgling
・ Suitable for Use with McAlpine Bath Wastes
・ Manufactured in polypropylene
The McAlpine L10 75mm Water Seal with 1½" Multifit Outlet Bath Trap is a plumbing component used to connect the waste pipe from a bath to the drainage system. The L10 trap is designed to be installed below the bath and is commonly used in residential and commercial plumbing installations.
The L10 bath trap features a 75mm water seal, which helps to prevent foul odours and gases from escaping from the drainage system and entering the living space. The water seal also helps to prevent blockages by trapping debris and preventing it from entering the drainage system.
The 1½" multifit outlet allows for easy connection to a range of waste pipe sizes and types, making it a versatile choice for a variety of plumbing applications. The trap also features a removable grid, which allows for easy cleaning and maintenance.
Overall, the McAlpine L10 75mm Water Seal with 1½" Multifit Outlet Bath Trap is a reliable and easy-to-use plumbing component that is suitable for use in a range of different plumbing installations.
・ 75mm Water Seal
・ 1½" Multift Compression Outlet suits all plastic, copper and lead pipe
・ Suitable for Use with McAlpine Bath Wastes
・ Manufactured in polypropylene
・ Conforms to BS EN 274-1:2002
The McAlpine WHB-1 Wash Hand Basin and Bath Space Savers with Self-Closing Waste Valve are plumbing fixtures designed to save space in bathrooms.
The WHB-1 is a compact wash hand basin that can be installed in small bathrooms or cloakrooms. It has a self-closing waste valve, which prevents water from draining out of the basin when it is not in use, helping to conserve water. The basin is made of vitreous china, a durable and easy-to-clean material.
The Space Savers are bathtub waste and overflow units that also feature self-closing waste valves. They are designed to fit into the limited space available between the bathtub and the wall. They are available in different configurations to fit different types of bathtubs.
Both the WHB-1 and the Space Savers are made by McAlpine, a UK-based manufacturer of plumbing products. They are designed to be easy to install and to provide reliable and efficient performance.
・ Side inlet connection for 19/23mm condensate or condense drain
・ 1.25" BSP Thread ・ Manufactured in polypropylene
・ For WC Overflow Kits click here
・ Manufactured in polypropylene
The McAlpine P10 19mm Water Seal Multifit Outlet Bath Trap is a plumbing component that is designed to prevent foul odors and gases from escaping through the waste pipe and entering the building.
This bath trap features a 19mm water seal, which creates a barrier to prevent sewer gases from entering the building. It also has a multifit outlet, which means that it can be connected to a variety of different pipe sizes and materials.
The P10 bath trap is manufactured by McAlpine, a well-known and respected brand in the plumbing industry. It is designed to meet the highest standards of quality and reliability, and is backed by a manufacturer's guarantee for added peace of mind.
Overall, if you are in need of a bath trap for your plumbing system, the McAlpine P10 19mm Water Seal Multifit Outlet Bath Trap is a great choice to consider. It is easy to install, compatible with a variety of pipe sizes and materials, and manufactured by a trusted brand in the industry.
・ 19mm Water Seal
・ Multifit Compression Outlet suits all plastic, copper and lead pipe
・ Suitable for Use with McAlpine Bath Wastes
・ Manufactured in polypropylene
