Bahco Expansive Bits are capable of drilling a wide range of shallow hole sizes in wood. The MD series have round shanks and are suitable for use with power tools. Made from a single-piece of drop forged steel. Head and adjustable cutters hardened and tempered. Locking screw zinc plated with hexagonal head with slot. With expansive bits it is possible to drill a full range of diameters with the same bit, in wood. Adjustable with screwdriver or wrench.Size: 22-76mm.Length: 120mm.Shank: round.
Bahco Long Combination Auger Bit, these are dual-purpose and can be used in hand braces and power drills. Designed to quickly drill accurate, very clean holes in awkward to reach spots or through heavy-section timbers. The auger bits are lacquered for protection against rust. Overall length: 400mm.Size: 14 mm. Overall length: 400 mm (16in).
Bahco 9526 Combination Auger Bit Set, contains six of the most popular sizes. These are dual-purpose and can be used in both electric power drills and hand braces. With a single cutting edge for easy regrinding, though the need for regrinding is reduced as it is made from hardened tool steel for a longer cutting life. The threaded tip moderates a self-feed when using a power drill, but still sufficient self-feed when used in a hand brace. For quick precision cutting with all types of wood. Supplied in a wallet case. Sizes: 10, 13, 16, 19, 22 and 25mm.
Bahco 9526 Combination Auger Bits are dual-purpose and can be used in both electric power drills and hand braces. With a single cutting edge for easy regrinding, though the need for regrinding is reduced as it is made from hardened tool steel for a longer cutting life. The threaded tip moderates a self-feed when using a power drill, but still sufficient self-feed when used in a hand brace. For quick precision cutting with all types of wood.Diameter: 6mm. Length: 160mm.
Bahco 9526 Combination Auger Bits are dual-purpose and can be used in both electric power drills and hand braces. With a single cutting edge for easy regrinding, though the need for regrinding is reduced as it is made from hardened tool steel for a longer cutting life. The threaded tip moderates a self-feed when using a power drill, but still sufficient self-feed when used in a hand brace. For quick precision cutting with all types of wood.Diameter: 11mm.Length: 190mm.
Bahco Flat Bit Extension Shaft is hardened and ground, lacquered for rust protection, and features two locking screws. One hexagonal key for fastening is included with each extension shaft.330 mm long extension shaft for Flat bits of 14 to 32 mm diameter.
Bahco Flat Bit Extension Shaft is hardened and ground, lacquered for rust protection, and features two locking screws. One hexagonal key for fastening is included with each extension shaft.
Bahco 665 Carbide Edged Heavy-Duty Paint Scraper developed according to the scientific ERGO™ process. Features a two component handle for better grip. Improved angle between blade and handle to increase knuckle space. Slimline front for easier use in confined spaces. Will accept 50 and 62mm blades, and has a detachable knob. Blade Length: 62mm.
Bahco 650 Carbide Edged Power Scraper developed according to the scientific ERGO™ process and has an improved angle between blade and handle to provide more space for knuckles. Slimline front for easier use in confined spaces. Designed to fit both 50 and 62mm blades. Blade Length: 50mm.
For filing circular openings or concave surfaces. Tapered towards the point, 4in and 6in files are fully pointed, 8in and longer are semi-pointed. All double cut.Size 200mm (8in)Cut: round smooth.Tanged.
For filing circular openings or concave surfaces. Tapered towards the point, 4in and 6in files are fully pointed, 8in and longer are semi-pointed. All double cut.Size 150mm (6in)Cut: round smooth.Tanged.
For filing circular openings or concave surfaces. Tapered towards the point, 4in and 6in files are fully pointed, 8in and longer are semi-pointed. All double cut.Size 100mm (4in)Cut: round smooth.Tanged.
For filing circular openings or concave surfaces. Tapered towards the point, 4in and 6in files are fully pointed, 8in and longer are semi-pointed. All double cut.Size 300mm (12in)Cut: round smooth.Tanged.
For filing circular openings or concave surfaces. Tapered towards the point, 4in and 6in files are fully pointed, 8in and longer are semi-pointed. All double cut.Size 250mm (10in)Cut: round smooth.Tanged.
For filing circular openings or concave surfaces. Tapered towards the point, 4in and 6in files are fully pointed, 8in and longer are semi-pointed. All double cut.Size 200mm (8in)Cut: round second.Tanged.
For filing circular openings or concave surfaces. Tapered towards the point, 4in and 6in files are fully pointed, 8in and longer are semi-pointed. All double cut.Size 150mm (6in)Cut: round second.Tanged.
For filing circular openings or concave surfaces. Tapered towards the point, 4in and 6in files are fully pointed, 8in and longer are semi-pointed. All double cut.Size 100mm (4in)Cut: round second.Tanged.
For filing circular openings or concave surfaces. Tapered towards the point, 4in and 6in files are fully pointed, 8in and longer are semi-pointed. All double cut.Size 300mm (12in)Cut: round second.Tanged.
For filing circular openings or concave surfaces. Tapered towards the point, 4in and 6in files are fully pointed, 8in and longer are semi-pointed. All double cut.Size 250mm (10in)Cut: round second.Tanged.
The Bahco 4750-ROCO-1 Tool Roll has alternately apposing slots for storing a variety of tools. Made from durable, hard wearing 1680D polyester with Hook & Loop closure.
Bahco Round Needle Files with surfaces which taper to a point and are double cut. For fine filing and polishing jobs. Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths.Size: 16cm.Cut: 2 smooth. Type: round needle file.
Bahco Round Needle Files with surfaces which taper to a point and are double cut. For fine filing and polishing jobs. Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths.Size: 16cm.Cut: 0 (bastard).Type: round needle file.
Bahco Round Needle Files with surfaces which taper to a point and are double cut. For fine filing and polishing jobs. Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths.Size: 14cm.Cut: 2 (smooth).Type: round needle file.
Bahco Round Needle Files with surfaces which taper to a point and are double cut. For fine filing and polishing jobs. Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths.Size: 14cm.Cut: 0 (bastard). Type: round needle file.
Bahco Round files are used for filing circular openings or concave surfaces. Tapered towards the point, 4in and 6in files are fully pointed, whilst 8in and longer are semi-pointed. All double cut. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 200mm (8in)Cut: round bastard.Tanged.
Bahco Round files are used for filing circular openings or concave surfaces. Tapered towards the point, 4in and 6in files are fully pointed, whilst 8in and longer are semi-pointed. All double cut. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 150mm (6in)Cut: round bastard.Tanged.
Bahco Round files are used for filing circular openings or concave surfaces. Tapered towards the point, 4in and 6in files are fully pointed, whilst 8in and longer are semi-pointed. All double cut. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 100mm (4in)Cut: round bastard.Tanged.
Bahco Round files are used for filing circular openings or concave surfaces. Tapered towards the point, 4in and 6in files are fully pointed, whilst 8in and longer are semi-pointed. All double cut. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 300mm (12in)Cut: round bastard.Tanged.
Bahco Round files are used for filing circular openings or concave surfaces. Tapered towards the point, 4in and 6in files are fully pointed, whilst 8in and longer are semi-pointed. All double cut. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 250mm (10in)Cut: round bastard.Tanged.
The Bahco Arbor Extension is a holesaw extension that gives extra reach in difficult to cut surroundings. Length: 330mm.Fits arbors 1130, 11152, and 11152QC. Length: 330mm.
Bahco 930 Arbor 3/8in is suitable for 14-30mm holesaws, for use with hand held machines. All arbors are hardened for maximum strength. The 3834 Series Arbors are available in a range of sizes suitable for different chuck capacities. Shank size: 8.5mm.
730 Arbor is suitable for 14-30mm holesaws, for use with hand held machines. All arbors are hardened for maximum strength. The 3834 Series Arbors are available in a range of sizes suitable for different chuck capacities. Shank size: 6.4mm Triangular shank.
Bahco 630 Arbor 1/4in is suitable for 14-30mm holesaws, for use with hand held machines. All arbors are hardened for maximum strength. The 3834 Series Arbors are available in a range of sizes suitable for different chuck capacities. Shank size: 6.4mm.
The 3834 Series Arbors are available in a range of sizes suitable for different chuck capacities. Shank Size. 11.1 mm The design of the 11152 arbor makes it suitable for 32-210 mm holesaws, it eliminates play and increases the strength of the holesaw by redistributing the load from the thread to the solid cap. These are to be used with hand held machines and, when operating with high work load, in static machines.All arbors are hardened for maximum strength. The 11152 arbors have drive pins to transfer large cutting force from the holesaw to the power unit. Carded
