Bahco BAHCOFIT Insulated Screwdrivers are suitable for work on live equipment, up to 1,000 Volts. They have 2-component handles with vertical grooves for comfortable grip and maximum force transmission. The blades are made from high performance alloy steel, which is chrome plated and entirely hardened. A black finish tip provides higher accuracy. Each screwdriver is branded with part number, tip symbol and size for easier identification. They are each individually tested and manufactured according to IEC 60900 and conform to ISO 8764. This set of 2 contains: 1 x Slotted Screwdriver: 3.0 x 100mm1 x Phillips Screwdriver: PH1 x 80mm
Bahco BAHCOFIT Screwdrivers have 2-component handles with vertical grooves for comfortable grip and maximum force transmission. Their blades are made from high performance alloy steel which is chrome plated and entirely hardened. The black finish tip provides higher accuracy. Each screwdriver has its part number and tip size laser printed for easier identification. This set of 5 contains: 5 x TORX Screwdrivers: TX10 x 75mm, TX15 x 100mm, TX20 x 100mm, TX25 x 125mm, TX30 x 150mm
The Bahco 3906 Sandflex Bi-Metal Hacksaw Blades are virtually unbreakable and shatterproof with precision ground teeth for all kinds of metal sawing. With a blade back of strong, flexible spring steel and a tooth line in high-alloyed, super high-speed steel, this blade is guaranteed to keep its sharpness for a long time.1 x Pack of 5 Bahco 3906 Sandflex Hacksaw Blades 300mm (12in) x 18 TPI.
Bahco 1RM Series Ratcheting Combination Wrench with a 12-point Dynamic-Drive profile provides longer life for screws and nuts. Both ends are angled at 15 degree, the open end has a slimmer head for improved accessibility, whilst the ratchet ring end offers knuckle clearance and increased grip. They offer a 5 degree action angle with a switch for quick change of right and left direction. Made from high-performance alloy steel with a chrome-plated, micro-matt finish. All sizes feature large, bi-directional size markings for easy identification. Conforms to ISO 1711-1 and DIN 3113.1 x Bahco 1RM Ratcheting Combination Wrench 17mm
Bahco 1RM Series Ratcheting Combination Wrench with a 12-point Dynamic-Drive profile provides longer life for screws and nuts. Both ends are angled at 15 degree, the open end has a slimmer head for improved accessibility, whilst the ratchet ring end offers knuckle clearance and increased grip. They offer a 5 degree action angle with a switch for quick change of right and left direction. Made from high-performance alloy steel with a chrome-plated, micro-matt finish. All sizes feature large, bi-directional size markings for easy identification. Conforms to ISO 1711-1 and DIN 3113.1 x Bahco 1RM Ratcheting Combination Wrench 13mm
Bahco 1RM Series Ratcheting Combination Wrench with a 12-point Dynamic-Drive profile provides longer life for screws and nuts. Both ends are angled at 15 degree, the open end has a slimmer head for improved accessibility, whilst the ratchet ring end offers knuckle clearance and increased grip. They offer a 5 degree action angle with a switch for quick change of right and left direction. Made from high-performance alloy steel with a chrome-plated, micro-matt finish. All sizes feature large, bi-directional size markings for easy identification. Conforms to ISO 1711-1 and DIN 3113.1 x Bahco 1RM Ratcheting Combination Wrench 11mm
Bahco 3 Piece ERGO Engineering File Set. All files are fitted with a two-component handle for maximum comfort and an excellent grip Developed according to the scientific ERGO process. Supplied in a cardboard outer display packaging containing plastic roll-up wallet. Contains: 1 x 1-100-08-02 Flat Second Cut File 200mm (8in)1 x 1-210-08-02 Half-Round Second Cut File 200mm (8in)1 x 1-230-08-02 Round Second Cut File 200mm (8in)
1 x Bahco ERGO™ Slim VDE Insulated Pozidriv Screwdriver PZ2 x 80mm. Bahco ERGO™ Slim VDE Insulated Screwdrivers with slim blades (reduced blade diameter) for Pozidriv head screws. Blades are 30% slimmer than regular insulated blades for better accessibility. Suitable for work on live equipment, up to 1,000V. Its high-quality blade insulation is moulded directly onto the blade. The phosphate finish tip provides higher accuracy, a precise fit and no flaking. Fitted with a 3-component handle for maximum user comfort. The soft material with a ridged surface provides superior grip and greater force transmission. It's easy to choose the right tip with the colour coded handle and permanent symbol on the domed end. A flat face prevents the screwdriver from rolling away. There is also an integrated hanging hole for easy storage. Screwdriver developed according to the scientific ERGO™ process. Individually inspected and manufactured according to IEC 60900, tested in a water bath at 10,000V. Conforms to: ISO 2380/DIN 5264.
These Bahco 2430S ERGO™ Insulated Long Nose Pliers have the following specification: Length: 140mm (5.1/2in)Cutting Capacity: Copper 2.5mm, Iron 1.8mm, Iron Alloy 1.4mm Bahco ERGO™ Insulated Long Nose Pliers have half-round serrated jaws for gripping flat and round material. The hardened cutting edges are suitable for cutting soft and hard wire. Made from high-performance alloy steel with a phosphate finish and anti-corrosion treated. Fitted with two-component ERGO™ insulated handles (thermoplastic surface on a tough polypropylene base) to provide superior grip. Suitable for working on live equipment up to 1,000V in compliance with IEC 60900. Every tool is tested at 10,000V for 10 seconds at the end of the manufacturing process. Developed according to the scientific ERGO™ process. Conform to ISO 5745, IEC 60900 standards.
1 x Bahco ERGO™ Slim VDE Insulated Pozidriv Screwdriver PZ1 x 80mm. Bahco ERGO™ Slim VDE Insulated Screwdrivers with slim blades (reduced blade diameter) for Pozidriv head screws. Blades are 30% slimmer than regular insulated blades for better accessibility. Suitable for work on live equipment, up to 1,000V. Its high-quality blade insulation is moulded directly onto the blade. The phosphate finish tip provides higher accuracy, a precise fit and no flaking. Fitted with a 3-component handle for maximum user comfort. The soft material with a ridged surface provides superior grip and greater force transmission. It's easy to choose the right tip with the colour coded handle and permanent symbol on the domed end. A flat face prevents the screwdriver from rolling away. There is also an integrated hanging hole for easy storage. Screwdriver developed according to the scientific ERGO™ process. Individually inspected and manufactured according to IEC 60900, tested in a water bath at 10,000V. Conforms to: ISO 2380/DIN 5264.
1 x Bahco ERGO™ Slim VDE Insulated Phillips Screwdriver PH2 x 100mm. Bahco ERGO™ Slim VDE Insulated Screwdrivers with slim blades (reduced blade diameter) for Phillips head screws. Blades are 30% slimmer than regular insulated blades for better accessibility. Suitable for work on live equipment, up to 1,000V. Its high-quality blade insulation is moulded directly onto the blade. The phosphate finish tip provides higher accuracy, a precise fit and no flaking. Fitted with a 3-component handle for maximum user comfort. The soft material with a ridged surface provides superior grip and greater force transmission. It's easy to choose the right tip with the colour coded handle and permanent symbol on the domed end. A flat face prevents the screwdriver from rolling away. There is also an integrated hanging hole for easy storage. Screwdriver developed according to the scientific ERGO™ process. Individually inspected and manufactured according to IEC 60900, tested in a water bath at 10,000V. Conforms to: ISO 2380/DIN 5264.
These Bahco 2421S ERGO™ Insulated Flat Nose Pliers have the following specification: Length: 180mm (7in) Bahco ERGO™ Insulated Flat Nose Pliers have been designed for gripping flat material. The tips provide good grip and improved accessibility in confined spaces. Made from high-performance alloy steel with a phosphate finish and anti-corrosion treated. Fitted with two-component ERGO™ insulated handles (thermoplastic surface on a tough polypropylene base) to provide superior grip. Suitable for working on live equipment up to 1,000V in compliance with IEC 60900. Every tool is tested at 10,000V for 10 seconds at the end of the manufacturing process. Developed according to the scientific ERGO™ process. Conform to ISO 5745, IEC 60900 standards.
1 x Bahco ERGO™ Slim VDE Insulated Phillips Screwdriver PH1 x 80mm. Bahco ERGO™ Slim VDE Insulated Screwdrivers with slim blades (reduced blade diameter) for Phillips head screws. Blades are 30% slimmer than regular insulated blades for better accessibility. Suitable for work on live equipment, up to 1,000V. Its high-quality blade insulation is moulded directly onto the blade. The phosphate finish tip provides higher accuracy, a precise fit and no flaking. Fitted with a 3-component handle for maximum user comfort. The soft material with a ridged surface provides superior grip and greater force transmission. It's easy to choose the right tip with the colour coded handle and permanent symbol on the domed end. A flat face prevents the screwdriver from rolling away. There is also an integrated hanging hole for easy storage. Screwdriver developed according to the scientific ERGO™ process. Individually inspected and manufactured according to IEC 60900, tested in a water bath at 10,000V. Conforms to: ISO 2380/DIN 5264.
1 x Bahco 428 Curved Fibreglass Claw Hammer 570g (20oz). The Bahco 428 Curved Claw Hammer has an octagonal neck and a brightly polished round head. Fitted with a fibreglass handle for maximum shock absorption and a comfortable black hand grip. The shaft is painted a bright orange, making it easier to find in a toolbox.
This 8 Piece Bahco 9629 Series Flat Bit Set is supplied in a handy, plastic carry case. Contains the following sizes: 12, 16, 18, 20, 22, 25, 28, 32mm. The Bahco 9629 Series Flat Bit has a positive cutting angle which drills holes twice as fast and lasts 3x longer than a conventional bit. Made from high-carbon steel and heat-treated all over. The hardened blade is forged directly from the round shaft. Its winged shoulders enable the bit to first cut the wood and then remove the material from the centre section, ensuring a smooth finish and superior swarf clearance.
1 x Bahco 428 Curved Fibreglass Claw Hammer 454g (16oz). The Bahco 428 Curved Claw Hammer has an octagonal neck and a brightly polished round head. Fitted with a fibreglass handle for maximum shock absorption and a comfortable black hand grip. The shaft is painted a bright orange, making it easier to find in a toolbox.
Bahco ERGO™ Insulated Wire Stripping Pliers provide easy wire cutting and stripping for copper and aluminium wires. Ideal for stripping copper wire up to 5mm. Made from high-performance alloy steel with a phosphate finish and anti-corrosion treated. Fitted with two-component ERGO™ insulated handles (thermoplastic surface on a tough polypropylene base) to provide superior grip. Suitable for working on live equipment up to 1,000V in compliance with IEC 60900. Every tool is tested at 10,000V for 10 seconds at the end of the manufacturing process. Developed according to the scientific ERGO™ process. Specification: Length: 150mm (6in)Stripping Capacity: 0.5-5mm
Bahco 396-INS Folding Insulation Saw with super sharp wavy toothing (WT) for a smooth and clean cut. Cuts insulation materials: glass wool, stone wool, etc. Ideal for use when space is limited. Fitted with a strong handle and a soft, non-slip grip for increased comfort and control. There is also a safety lock on the blade that can be used in the opened and closed position. Specification: Blade Length: 175mmFolded Length: 230mm
1 x Bahco 2628S ERGO™ Insulated Combination Pliers 180mm (7in) Cutting Capacity; Iron Alloy 2.5mm, Piano Wire 2.0mm Bahco ERGO™ Insulated Combination Pliers have a special head design for better accessibility and hardened cutting edges for cutting soft and hard wire. Its gripping surfaces are particularly suited for flat and round material. Made from high-performance alloy steel with a phosphate finish and anti-corrosion treated. Fitted with two-component ERGO™ insulated handles (thermoplastic surface on a tough polypropylene base) to provide superior grip. Suitable for working on live equipment up to 1,000V in compliance with IEC 60900. Every tool is tested at 10,000V for 10 seconds at the end of the manufacturing process. Developed according to the scientific ERGO™ process. Conform to ISO 5745, IEC 60900 standards.
1 x Bahco 2628S ERGO™ Insulated Combination Pliers 160mm (6.1/4in) Cutting Capacity; Iron Alloy 2mm, Piano Wire 1.8mm Bahco ERGO™ Insulated Combination Pliers have a special head design for better accessibility and hardened cutting edges for cutting soft and hard wire. Its gripping surfaces are particularly suited for flat and round material. Made from high-performance alloy steel with a phosphate finish and anti-corrosion treated. Fitted with two-component ERGO™ insulated handles (thermoplastic surface on a tough polypropylene base) to provide superior grip. Suitable for working on live equipment up to 1,000V in compliance with IEC 60900. Every tool is tested at 10,000V for 10 seconds at the end of the manufacturing process. Developed according to the scientific ERGO™ process. Conform to ISO 5745, IEC 60900 standards.
These Bahco 2521S ERGO™ Insulated Round Nose Pliers have the following specification: Length: 140mm (5.1/2in) Bahco ERGO™ Insulated Round Nose Pliers have been specifically designed for wire bending and have round thin tips for improved accessibility. Made from high-performance alloy steel with a phosphate finish and anti-corrosion treated. Fitted with two-component ERGO™ insulated handles (thermoplastic surface on a tough polypropylene base) to provide superior grip. Suitable for working on live equipment up to 1,000V in compliance with IEC 60900. Every tool is tested at 10,000V for 10 seconds at the end of the manufacturing process. Developed according to the scientific ERGO™ process. Conform to ISO 5745, IEC 60900 standards.
These Bahco 2521S ERGO™ Insulated Round Nose Pliers have the following specification: Length: 160mm (6.1/4in) Bahco ERGO™ Insulated Round Nose Pliers have been specifically designed for wire bending and have round thin tips for improved accessibility. Made from high-performance alloy steel with a phosphate finish and anti-corrosion treated. Fitted with two-component ERGO™ insulated handles (thermoplastic surface on a tough polypropylene base) to provide superior grip. Suitable for working on live equipment up to 1,000V in compliance with IEC 60900. Every tool is tested at 10,000V for 10 seconds at the end of the manufacturing process. Developed according to the scientific ERGO™ process. Conform to ISO 5745, IEC 60900 standards.
1 x Bahco 2430S ERGO™ Insulated Long Nose Pliers 160mm (6.1/4in) Cutting Capacity; Copper 3mm, Iron 1.8mm, Iron Alloy 1.6mm Bahco ERGO™ Insulated Long Nose Pliers have half-round serrated jaws for gripping flat and round material. The hardened cutting edges are suitable for cutting soft and hard wire. Made from high-performance alloy steel with a phosphate finish and anti-corrosion treated. Fitted with two-component ERGO™ insulated handles (thermoplastic surface on a tough polypropylene base) to provide superior grip. Suitable for working on live equipment up to 1,000V in compliance with IEC 60900. Every tool is tested at 10,000V for 10 seconds at the end of the manufacturing process. Developed according to the scientific ERGO™ process. Conform to ISO 5745, IEC 60900 standards.
These Bahco 2421S ERGO™ Insulated Flat Nose Pliers have the following specification: Length: 140mm (5.1/2in) Bahco ERGO™ Insulated Flat Nose Pliers have been designed for gripping flat material. The tips provide good grip and improved accessibility in confined spaces. Made from high-performance alloy steel with a phosphate finish and anti-corrosion treated. Fitted with two-component ERGO™ insulated handles (thermoplastic surface on a tough polypropylene base) to provide superior grip. Suitable for working on live equipment up to 1,000V in compliance with IEC 60900. Every tool is tested at 10,000V for 10 seconds at the end of the manufacturing process. Developed according to the scientific ERGO™ process. Conform to ISO 5745, IEC 60900 standards.
These Bahco 2421S ERGO™ Insulated Flat Nose Pliers have the following specification: Length: 160mm (6.1/4in) Bahco ERGO™ Insulated Flat Nose Pliers have been designed for gripping flat material. The tips provide good grip and improved accessibility in confined spaces. Made from high-performance alloy steel with a phosphate finish and anti-corrosion treated. Fitted with two-component ERGO™ insulated handles (thermoplastic surface on a tough polypropylene base) to provide superior grip. Suitable for working on live equipment up to 1,000V in compliance with IEC 60900. Every tool is tested at 10,000V for 10 seconds at the end of the manufacturing process. Developed according to the scientific ERGO™ process. Conform to ISO 5745, IEC 60900 standards.
The Bahco Pistol Grip Ratcheting Screwdriver Set contains a small selection of useful tools. Supplied in an oil and temperature resistant polypropylene case with the following contents: 3 x Ratchet Wrenches: 8 x 10-9 x 11mm, 12 x 14-13 x 15mm, 16 x 17-18 x 19mm 3 x 25mm Slotted Bits: 4.5, 5.5, 6.5mm3 x 25mm Phillips Bits: PH1, PH2, PH33 x 25mm Pozidriv Bits: PZ1, PZ2, PZ37 x 25mm TORX Bits: TX10, TX15, TX20, TX25, TX27, TX30, TX403 x 25mm HEX Bits: 3, 4, 5 1 x 1/4 x 1/4in Socket Adaptor 1 x Bit Adaptor for 1/4in 10mm Reverse Gear 1 x Pistol Grip Ratcheting Screwdriver
The Bahco 59/S100BC Bit Set contains a wide selection of bits suitable for universal use. Each bit is made from high-performance alloy steel. TORX bits are colour coded to easily identify the size of the tip. Supplied in a durable carry case. Contains:17 x 25mm Phillips Bits: PH1(x2), PH2(x9), PH3 and PH2G(x5).12 x 25mm Pozidriv Bits: PZ1(x2), PZ2(x9) and PZ3.50 x 25mm TORX Bits: TX10(x3), TX15(x5), TX20(x15), TX25(x8), TX27, TX30(x15) and TX40(x3).5 x 25mm TORX Tamper-Resistant Bits: TTX10, TTX15, TTX20, TTX25 and TTX30.2 x 25mm Slotted Bits: 4.5 and 5.5mm.9 x 25mm Hexagon Bits: 3, 4(x3), 5, 6(x3) and 8mm.2 x 25mm Robertson Bits: #1 and #2.1 x KM653 Magnetic Universal Bit Holder.1 x KM653-QR Magnetic Quick-Release Bit Holder.1 x Socket Adaptor 1/4in.
The Bahco BWSS12P5 1/2in Drive Impact Wheel Socket Set contains a selection of the most popular sizes. The long length of these sockets enables easy access. Made from high-performance alloy steel, with plastic protection on socket walls to ensure protection of the rims, and plastic protection inside the socket to ensure protection of wheel nuts. They have a black phosphate finish with colour coded jackets for easy identification. Sizes: 17, 19, 21, 22 and 24mm
