Bahco P11 Gardening Knife - Budding is a high-quality grafting knife with an extremely sharp folding blade for cutting graft and bark. The folding brass spatula is for lifting the bark to enable the graft to be inserted. The plastic cover provides a comfortable grip.
The Bahco Plastic Tube Cutter is made from PA, the body is reinforced with fibreglass and fitted with a comfortable bi-material handle. Suitable for plastic tubes up to 32mm. Specification: Cuts: PVC, PEX, PP, PB and PEMax. Capacity: 32mm
The Bahco Insulation Saw Sharpener is designed to operate easily and sharpen the edge of the Bahco Insulation Saw. Equipped with tungsten carbide blades well suited to sharpening the Insulation Saw. Contains a knuckle protection for user safety.
SB-3732 series nail punches are manufactured with a plastic handle and fully polished steel surface with a brilliant chrome finish.Tip size: 2.0 mm (5/64in). Length: 125 mm (5in).
SB-3732 series nail punches are manufactured with a plastic handle and fully polished steel surface with a brilliant chrome finish.Tip size: 2.5 mm (3/32in). Length: 125 mm (5in).
SB-3732 series nail punches are manufactured with a plastic handle and fully polished steel surface with a brilliant chrome finish.Tip size: 3.2 mm (1/8in).Length: 125 mm (5in).
Conical edges and surfaces which taper to a point. Flat uncut back, surfaces double cut, thin edge single cut. For fine filing and polishing jobs.Size: 16cm.Cut: 2 (smooth).Type: Knife needle file.
Bahco K-AP-1 Gardeners Knife has a stainless steel blade ideal for general use. Bow-shaped folding blade, and has a very flat design to slip into your pocket.
For filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work in high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness.Size 150mm (6in)Cut: hand smooth.Tanged.
For filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work in high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness.Size 300mm (12in)Cut: hand smooth.Tanged.
For filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work in high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness.Size 250mm (10in)Cut: hand smoothTanged
For filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work in high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness.Size 200mm (8in)Cut: hand secondTanged
For filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work in high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness.Size 150mm (6in)Cut: hand secondTanged
For filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work in high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness.Size 100mm (4in)Cut: hand secondTanged
For filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work in high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness.Size: 14in.Cut: hand second.Tanged.
For filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work in high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness.Size 300mm (12in)Cut: hand secondTanged
For filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work in high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness.Size 250mm (10in)Cut: hand secondTanged
Tapered half round cross section allows use on convex and concave surfaces. Suitable for deburring work. The edges and surfaces are tapered towards the point. 4in and 6in files are fully pointed, 8in and longer semi-pointed. Double cut.Size 200mm (8in)Cut: half round smooth.Tanged.
Tapered half round cross section allows use on convex and concave surfaces. Suitable for deburring work. The edges and surfaces are tapered towards the point. 4in and 6in files are fully pointed, 8in and longer semi-pointed. Double cut.Size 300mm (12in)Cut: half round smooth.Tanged.
Tapered half round cross section allows use on convex and concave surfaces. Suitable for deburring work. The edges and surfaces are tapered towards the point. 4in and 6in files are fully pointed, 8in and longer semi-pointed. Double cut.Size 250mm (10in)Cut: half round smooth.Tanged.
Tapered half-round cross section allows use on convex and concave surfaces. Suitable for deburring work. The edges and surfaces are tapered towards the point. 4in and 6in files are fully pointed, 8in and longer semi-pointed. Double cut.Size 300mm (12in)Cut: half round second.Tanged
Tapered half-round cross section allows use on convex and concave surfaces. Suitable for deburring work. The edges and surfaces are tapered towards the point. 4in and 6in files are fully pointed, 8in and longer semi-pointed. Double cut.Size 250mm (10in)Cut: half round second.Tanged.
Hand Needle files with surface double cut, edges single cut, edges and surfaces parallel.For fine filing and polishing jobs. Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths.Size: 16cm.Cut: 4 (dead smooth).Type: hand needle file.
Hand Needle files with surface double cut, edges single cut, edges and surfaces parallel.For fine filing and polishing jobs. Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths.Size: 16cm.Cut: 2 (smooth).Type: hand needle file.
Hand Needle files with surface double cut, edges single cut, edges and surfaces parallel.For fine filing and polishing jobs. Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths.Size: 16cm.Cut: 0 (bastard).Type: hand needle file.
Hand Needle files with surface double cut, edges single cut, edges and surfaces parallel.For fine filing and polishing jobs. Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths.Size: 14cm.Cut: 2 (smooth).Type: hand needle file.
Hand Needle files with surface double cut, edges single cut, edges and surfaces parallel.For fine filing and polishing jobs. Used by engravers, precision engineers, instrument makers, watchmakers and goldsmiths.Size: 14cm.Cut: 0 (bastard).Type: hand needle file.
Hand Cut File for filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work on high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 200mm (8in)Cut: hand bastard.Tanged.
Hand Cut File for filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work on high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 150mm (6in)Cut: hand bastard.Tanged.
Hand Cut File for filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work on high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size: 100mm (4in)Cut: hand bastardTanged
Hand Cut File for filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work on high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 300mm (12in)Cut: hand bastard.Tanged.
Hand Cut File for filing flat surfaces, sharp corners and shoulders as well as for deburring. A double cut file should be used for work on high-alloy tool steels. Also useful for the sharpening of heavy implements. High removal rate. Double cut on both sides - with one safe edge (a safe edge permits work in corners). Parallel sides but slightly tapered in thickness. Smooth Cut: Approx 62 teeth per 25mm (Fine).Second Cut: Approx 36 teeth per 25mm (Medium).Bastard Cut: Approx 26 teeth per 25mm (Coarse).Size 250mm(10in)Cut: hand bastardTanged
Bahco Insulated ERGO™ SLIM Screwdrivers are developed according to the scientific ERGO™ process. Combi insulated screwdriver features 2 tips in one, for slotted and Pozidriv head screws. Tested for work on live equipment, up to 1,000V. Fitted with a 3-component handle, for maximum user comfort and force transmission. Easy to choose the right tip, with the colour-coded handle and the symbol on the domed end. The blade is made from high-performance alloy steel, with a black finish and entirely hardened. Individually inspected and manufactured according to IEC 60900. Sizes: 1 x BE-8710SL Screwdriver PZ1/Slotted 5, Length: 80mm1 x BE-8720SL Screwdriver PZ2/Slotted 6, Length: 100mm
Bahco Insulated ERGO™ Screwdrivers are developed according to the scientific ERGO™ process. Combi insulated screwdriver features two tips in one, for slotted and Pozidriv head screws. Tested for work on live equipment, up to 1,000 Volts. Fitted with a 3-component handle, for maximum user comfort and force transmission. Easy to choose the right tip, with the colour-coded handle and the symbol on the domed end. The blade is made from high performance alloy steel, with a black finish and entirely hardened. Individually inspected and manufactured according to IEC 60900. Sizes: 1 x PZ1/Slotted 5, Length: 80mm 1 x PZ2/Slotted 6, Length: 100mm.
This Bahco Hex Key Set consists of 7 hexagon offset drivers with a black finish. The keys are in metric sizes and are resistant to impact and rust, and do not conduct heat or cold. The wide opening push button allows easy and automatic release of the blades, which have a positive stop at 270º for maximum leverage. Allows for different working positions. This compact set is easy to store and to be carried in a pocket. The 2-component soft grip handle ensures user comfort. The BAH9777B Hex Key set has the following sized keys: 2.5mm, 3mm, 4mm, 5mm, 6mm, 8mm and 10mm.
A Bahco Handle for Shaped Files that features a two component ERGO™ design. The end covers the tang and shoulder of the file for safety and comfort. Suits Series 1-190 150-170mm (6-7in) & Series 1-170 200-250mm (8-10in).
