The ITL Insulated 3/8in Drive Reversible Ratchet. Made from injection moulded nylon 11, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to and70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation.
1 x ITL Insulated 3/8in Drive Socket 13mm. The ITL Insulated 3/8in Drive Sockets are fully insulated and exceed international standards. They have a lifetime guarantee on both the tool and insulation. Each socket is manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to ;158ºF, -40ºC to ;70ºC. 13mm
1 x ITL Insulated 3/8in Drive Socket 17mm. The ITL Insulated 3/8in Drive Sockets are fully insulated and exceed international standards. They have a lifetime guarantee on both the tool and insulation. Each socket is manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to ;158ºF, -40ºC to ;70ºC. 17mm
1 x ITL Insulated 3/8in Drive Socket 19mm. The ITL Insulated 3/8in Drive Sockets are fully insulated and exceed international standards. They have a lifetime guarantee on both the tool and insulation. Each socket is manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to ;158ºF, -40ºC to ;70ºC. 19mm
The ITL 12 Piece Insulated 3/8in Drive Socket Set. The tools in this set are manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to and158ºF, -40ºC to and70ºC. Supplied in a case, contains: 6 x Metric Sockets: 8, 10, 13, 17, 19 and 20mm. 4 x Imperial Sockets: 3/8, 1/2, 3/4 and 7/8in AF. 1 x 3/8in Reversible Ratchet. 1 x Extension Bar 127mm (5in).
The ITL 12 Piece Insulated 3/8in Drive Socket Set. The tools in this set are manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to and158ºF, -40ºC to and70ºC. Supplied in a case, contains: 10 x Metric Sockets: 8, 9, 10, 11, 13, 17, 18, 19, 20, 22mm. 1 x 3/8in Reversible Ratchet. 1 x Extension Bar 127mm (5in).
The ITL 13 Piece Insulated 3/8in Drive Socket Set. The tools in this set are manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to +158ºF, -40ºC to +70ºC. Supplied in a case, contains: 10 x Metric Sockets: 8, 9, 10, 11, 13, 17, 18, 19, 20 and 22mm. 1 x 3/8in Reversible Ratchet. 1 x Extension Bar 127mm (5in). 1 x Extension Bar 250mm (10in).
The ITL Insulated Adjustable Wrenches with injection moulded nylon 11 handles, which exceed the requirements of IEC 60900, the industry standard for live line working. In addition, these tools meet the requirements of Category 'C', which requires them to perform at extreme temperatures of -40°C to +70°C, making them unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on the tool and insulation, plus a 30 day no quibble money back guarantee.International Insulated Adjustable Wrench. Size: 200mm (8in).
The ITL Insulated Adjustable Wrenches with injection moulded nylon 11 handles, which exceed the requirements of IEC 60900, the industry standard for live line working. In addition, these tools meet the requirements of Category 'C', which requires them to perform at extreme temperatures of -40°C to +70°C, making them unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on the tool and insulation, plus a 30 day no quibble money back guarantee.International Insulated Adjustable Wrench. Size: 300mm (12in).
The ITL Insulated Armour Saw. Made from injection moulded nylon 11, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to and70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation.
The ITL Insulated Belling Tool designed to enable jointers to avoid damage to insulation and safely bell cable earth sheaths during live jointing. Made from injection moulded nylon 11, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to and70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation.
The ITL Insulated Bent Nose Pliers with 45° jaws and a side cutter. They have injection moulded nylon 11 handles, which exceed the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to +70°C making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on the tool and insulation, plus a 30 day no quibble money back guarantee. Size: 150mm (6in).
The ITL Insulated Bent Nose Pliers, 200mm, made with a tapered and bent jaw for those hard to reach places. Multi-use with cutter for hard, soft and piano wire. Fitted with injection moulded nylon 11 handles, which exceed the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to and70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation.
The Insulated Cable Croppers for cutting aluminium and copper cables only. They have injection moulded nylon 11 handles, which exceed the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to +70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on the tool and insulation, plus a 30 day no quibble money back guarantee. Size: 200mm (8in).
1 x ITL Insulated Cable Cutters 230mm (9in). The ITL Insulated Cable Cutters made for cutting aluminium and copper cables only. They have injection moulded nylon 11 handles, which exceed the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to ;70°C, making it unique in this category. 230mm (9in)
1 x ITL Insulated Cable Cutters 250mm (10in). The ITL Insulated Cable Cutters made for cutting aluminium and copper cables only. They have injection moulded nylon 11 handles, which exceed the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to ;70°C, making it unique in this category. 250mm (10in)
The ITL Insulated Combination Pliers with side cutter and injection moulded nylon 11 handles, which exceed the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to +70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on the tool and insulation, plus a 30 day no quibble money back guarantee.International Insulated Combination Pliers. Size: 150mm (6in).
The ITL Insulated Combination Pliers with side cutter and injection moulded nylon 11 handles, which exceed the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to +70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on the tool and insulation, plus a 30 day no quibble money back guarantee.International Insulated Combination Pliers. Size: 200mm (8in).
The ITL Insulated Combination Pliers, 250mm, are made for gripping flat and round material. Made from injection moulded nylon 11, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to and70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation.
The ITL Insulated 3mm Cooker Knob Hex Driver for use on connector boxes. Made from injection moulded nylon 11 which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to and70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation, plus a 30 day no quibble money back guarantee.
The ITL Insulated Coring Knife made with a sharp, curved blade designed to cut cable coating. Made from injection moulded nylon 11, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to and70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation.
The ITL 20 Piece Insulated Deluxe Tool Kit. The tools in this set are manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to and158ºF, -40ºC to and70ºC. Supplied in a case, contains: 1 x Snipe Nose Pliers 150mm (6in). 1 x Combination Pliers 200mm (8in). 1 x Diagonal Cutters 150mm (6in). 1 x Cable Cutters 200mm (8in). 1 x Groove Joint Pliers 250mm (10in). 1 x Adjustable Spanner 200mm (8in). 1 x Slotted Terminal Screwdriver 3 x 75mm. 2 x Pozidrive Screwdrivers: PZ1 x 75mm, PZ2 x 100mm. 2 x Slotted Screwdrivers: 5 x 150mm, 6.5 x 150mm. 4 x Open Ended Spanners: 13, 17, 19, 24mm. 3 x Offset Ring Spanners: 13, 17, 19mm. 1 x Coring Knife.
ITL Insulated Diagonal Cutting Nippers with handles made from injection moulded nylon 11, which exceed the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to +70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on the tool and insulation, plus a 30 day no quibble money back guarantee. Size: 150mm (6in).
The Insulated Electrician Screwdrivers with parallel blades and injection, moulded nylon 11 handle, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to +70°C making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on the tool and insulation, plus a 30 day no quibble money back guarantee.International Insulated Electrician Screwdriver. Size: 150mm x 5mm.
The Insulated Electrician Screwdrivers with parallel blades and injection, moulded nylon 11 handle, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to +70°C making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on the tool and insulation, plus a 30 day no quibble money back guarantee.International Insulated Electrician Screwdriver Size: 200mm x 5mm.
The Insulated Electrician Screwdrivers with parallel blades and injection, moulded nylon 11 handle, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to +70°C making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on the tool and insulation, plus a 30 day no quibble money back guarantee.International Insulated Electrician Screwdriver. Size: 75mm x 5mm.
The ITL Insulated End Wire Strippers with injection moulded nylon 11 handles, which exceed the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to +70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on the tool and insulation, plus a 30 day no quibble money back guarantee. Size: 150mm (6in).
The ITL Insulated Engineers Screwdrivers with parallel blades with and injection moulded nylon 11 handle, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to +70°C making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on the tool and insulation, plus a 30 day no quibble money back guarantee. Size: 100mm x 6.5mm.
The ITL Insulated Flat Rasp for turning down material. Made from injection moulded nylon 11, which exceeds the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to and70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation.
The ITL Insulated General Purpose Open End Spanners are made from injection moulded nylon 11 which exceeds the requirements of IEC 60900, the industry standard for live line working. Only the handle is insulated to allow access into tight spaces. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to +70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on the tool and insulation, plus a 30 day no quibble money back guarantee.International Insulated General Purpose Spanner. Size: 1/2in AF.
1 x ITL Insulated General Purpose Open End Spanner 22mm. The ITL Insulated General Purpose Open End Spanners are made from injection moulded nylon 11 which exceeds the requirements of IEC 60900, the industry standard for live line working. Only the handle is insulated to allow access into tight spaces. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to ;70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation, plus a 30 day no quibble money back guarantee. 22mm
The ITL Insulated General Purpose Open End Spanners are made from injection moulded nylon 11 which exceeds the requirements of IEC 60900, the industry standard for live line working. Only the handle is insulated to allow access into tight spaces. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to +70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on the tool and insulation, plus a 30 day no quibble money back guarantee.International Insulated General Purpose Spanner. Size: 3/8in AF.
1 x ITL Insulated General Purpose Open End Spanner 8mm. The ITL Insulated General Purpose Open End Spanners are made from injection moulded nylon 11 which exceeds the requirements of IEC 60900, the industry standard for live line working. Only the handle is insulated to allow access into tight spaces. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to ;70°C, making it unique in this category. These insulated tools are the toughest in the market, being virtually indestructible. With a lifetime warranty on both the tool and insulation, plus a 30 day no quibble money back guarantee. 8mm
The ITL 29 Piece Insulated General Purpose Toolkit. The tools in this set are manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to and158ºF, -40ºC to and70ºC Supplied in a case, contains: 7 x Metric Spanners : 10, 11, 12, 13, 14, 17, 19mm. 7 x 1/2in Drive Metric Sockets: 10, 11, 12, 13, 14, 17, 19mm. 1 x 1/2in Reversible Ratchet. 2 x 1/2in Extension Bars: 125, 250mm. 1 x Coring Knife. 2 x 8in Pliers : Combination, Snipe Nose. 1 x 6in Diasgonal Cutting Pliers. 2 x 1/2in Drive Hex Key Sockets: 5, 6mm. 2 x Terminal / Slotted Screwdrivers: 3 x 75mm, 4 x 75mm. 2 x Slotted Screwdrivers 5 x 150mm, 8 x 150mm. 2 x Pozidriv Screwdrivers: PZ1 x 75mm, PZ2 x 100mm.
ITL 9 Piece Insulated General Purpose Toolkit. The tools in this set are manufactured from injection moulded nylon thermoplastic, and are 100% tested to IEC60900, Category C and ASTMF1505. They are designed to withstand extreme impact, abrasion, and are flame retardant. ITL tools are 100% tested using 1000 volts for 3 minutes submerged in water. They are Category C Impact Tested for operation within a greater temperature range -40ºF to and158ºF, -40ºC to and70ºC Supplied in a tool roll, contains: 1 x Snipe Nose Pliers 150mm (6in). 1 x Combination Pliers 200mm (8in). 1 x Cable Cutters 200mm (8in). 1 x Adjustable Spanner 200mm (8in). 1 x Slotted Terminal Screwdriver 3 x 75mm. 2 x Phillips Screwdrivers: PH1 x 75mm, PH2 x 100mm. 2 x Slotted Screwdrivers: 5 x 150mm, 6.5 x 150mm.
1 x ITL Insulated Groove Joint Pliers 305mm (12in). The ITL Insulated Groove Joint Pliers made with injection moulded nylon 11 handles, which exceed the requirements of IEC 60900, the industry standard for live line working. In addition, this tool meets the requirements of Category 'C', which requires it to perform at extreme temperatures of -40°C to ;70°C, making it unique in this category. 305mm (12in)
