The IRWIN Vise-Grip End Cable Cutter featuring induction hardened cutting face. The end cable cutters are made from chromium nickel steel that allows for improved durability on the gripping and cutting face. The pliers also feature machined jaws for maximum gripping strength and moulded ProTouch™ handles for added comfort and less hand fatigue. Cuts up to 2.0mm diameter cables. Length: 200m (8in).
The IRWIN Vise-Grip ErgoMulti Long Nose Pliers have a 62° ergonomic angled head for reduced wrist strain and are constructed of high-quality steel. They have been specially coated for superior rust-resistance and longer tool life. The induction-hardened cutting edges are durable enough to cut ACSR, nails, screws and even piano wire without damaging the cutting edge. There is also a built-in wire stripper, that strips 12AWG and 14AWG (solid) wire. They are fitted with industry-leading, three-zone comfort grips that have been contoured for optimal cushioning and control allowing the user to make more cuts comfortably. Integrated handle hooks for the Performance Lanyard system provide safer elevated working conditions and easier retrieval when stored. They are made in Germany and backed by IRWIN's Lifetime Guarantee. Capacity: 2mm Hard Wire.
The IRWIN Vise-Grip Set of 2 Fast Release™ Locking Pliers contains the following: 1 x 6LN Fast Release™ Long Nose Locking Pliers are ideal for delicate work, hobbies, tight spaces, electronics and clamping of small parts. Have a built-in wire cutter. Length: 150mm (6in), Capacity 51mm. 1 x 10WR Fast Release™ Curved Jaw Locking Pliers that provide a better fit around curved work shapes. Have a built-in wire cutter, for a variety of applications and material shapes. Length: 254mm (10in), Capacity: 48mm.
IRWIN Vise-Grip 3 Piece Fast Release™ Locking Plier Set supplied in a handy carry pouch, contains the following: 1 x 7R Fast Release™ Straight Locking Pliers have heavy-duty jaws that allow for maximum contact for all work shapes both flat and square. Featuring a solid steel head that makes this tool twice as strong as all other locking pliers. Length: 178mm (7in), Capacity: 38mm. 1 x 9LN Fast Release™ Long Nose Locking Pliers are ideal for delicate work, hobbies, tight spaces, electronics and clamping of small parts. Have a built-in wire cutter. Length: 229mm (9in), Capacity: 70mm. 1 x 10WR Fast Release™ Curved Jaw Locking Pliers that provide a better fit around curved work shapes. Have a built-in wire cutter, for a variety of applications and material shapes. Length: 254mm (10in), Capacity: 48mm.
IRWIN Vise-Grip Groove Joint Pliers have an all-purpose jaw that can grip onto flat, round, hex and square work pieces. The multi-groove ratcheting system has twice the number of groove positions compared to traditional groove joint pliers. Press-n-slide button adjusts the jaws 2x faster than traditional groove joint pliers. Anti-pinch non-slip ProTouch grips provide control, comfort, and less hand fatigue.Length: 250mm (10 in) Capacity: 51mm (2 in)
IRWIN Vise-Grip Groove Joint Pliers have an all-purpose jaw that can grip onto flat, round, hex and square work pieces. The multi-groove ratcheting system has twice the number of groove positions compared to traditional groove joint pliers. Press-n-slide button adjusts the jaws 2x faster than traditional groove joint pliers. Anti-pinch non-slip ProTouch grips provide control, comfort, and less hand fatigue.Length: 300mm (12 in). Capacity: 57mm (2 1/4 in).
The IRWIN Vise-Grip Groovelock Pliers are designed with twice the groove positions of traditional groove joint pliers to deliver optimal hand and jaw positioning, providing a superior grip. The all-purpose jaw grips onto flat, round, hexagon and square workpieces to provide tremendous grip. The quick adjusting Press-n-Slide button quickly adjusts the lower jaw. The GrooveLock ProTouch series have grips which are designed for comfort and provide less hand fatigue. AntiPinch prevents the handles from pinching.The ViseGrip IRWIN VIS10507628 Groovelock Water Pump Pliers ProTouch™ Handle have the following specifications:Capacity: 56mm. Groove positions: 16.Length: 250mm (10 inch).
The IRWIN Vise-Grip Groovelock Pliers are designed with twice the groove positions of traditional groove joint pliers to deliver optimal hand and jaw positioning, providing a superior grip. The all-purpose jaw grips onto flat, round, hexagon and square workpieces to provide tremendous grip. The quick adjusting Press-n-Slide button quickly adjusts the lower jaw. The GrooveLock ProTouch series have grips which are designed for comfort and provide less hand fatigue. AntiPinch prevents the handles from pinching.The VIS10507629 IRWIN Vise-Grip Groovelock Water Pump Pliers 300mm (12 inch) ProTouch™Handle have the following technical specifications:Capacity: 69mm. Groove positions: 19.Length: 300mm (12 inch).
The IRWIN Vise-Grip Groovelock Pliers are designed with twice the groove positions of traditional groove joint pliers to deliver optimal hand and jaw positioning, providing a superior grip. The all-purpose jaw grips onto flat, round, hexagon and square workpieces to provide tremendous grip. The quick adjusting Press-n-Slide button quickly adjusts the lower jaw. The GrooveLock ProTouch series have grips which are designed for comfort and provide less hand fatigue. AntiPinch prevents the handles from pinching.The IRWIN VIS10507626 Groovelock Water Pump Pliers 150mm (6 inch) ProTouch™ Handle have the following specifications:Jaw capacity: 29mm.Groove positions: 11.Length: 150mm.
The IRWIN Vise-Grip Groovelock Pliers are designed with twice the groove positions of traditional groove joint pliers to deliver optimal hand and jaw positioning, providing a superior grip. The all-purpose jaw grips onto flat, round, hexagon and square workpieces to provide tremendous grip. The quick adjusting Press-n-Slide button quickly adjusts the lower jaw. The GrooveLock ProTouch series have grips which are designed for comfort and provide less hand fatigue. AntiPinch prevents the handles from pinching.The VIS10507627 Irwin Vise-Grip Groovelock Water Pump Pliers 200mm (8 inch) ProTouch™ Handle have the following technical specifications:Jaw Capacity: 44mm. Groove positions: 13. Length: 200mm (8 inch).
IRWIN Vise-Grip combination pliers have an induction hardened chrome nickel steel cutting face that stays sharper for longer and improves durability. Machined multi-grip jaws for maximum gripping strength. Moulded ProTouch™ grips for comfort and less hand fatigue. 180mm (7in) and 200mm (8in) are high leverage handled.1 x IRWIN Vise-Grip High Leverage Combination Pliers 200mm (8in)
IRWIN Vise-Grip VDE pliers have a chrome nickel steel, induction hardened cutting edges that stay sharper for longer and improved durability. Machined jaws provide maxium grip strength. They are fully TÜV, GS, and VDE certified meaning they are safe for working with electrical equipment upto AC 1000 volts or DC 1500 volts. Featuring moulded, pull-resistant one component handles for added comfort and less hand fatigue. Length: 200mm (8 in).
IRWIN Vise-Grip Long Nose Pliers have an induction hardened chrome nickel steel cutting face that stays sharper for longer and improves durability. Long grip groove direction jaws provide maximum gripping strength whilst the moulded ProTouch grips provide extra comfort and less hand fatigue. Moulded 1 component handle that are comfortable, and feature pull-resistant handles. Cable cutter: up to 1.6 mm cables.1 x Visegrip Long Nose Pliers 150mm (6in)
IRWIN Vise-Grip Long Nose Pliers have an induction hardened chrome nickel steel cutting face that stays sharper for longer and improves durability. Long grip groove direction jaws provide maximum gripping strength whilst the moulded ProTouch grips provide extra comfort and less hand fatigue. Moulded 1 component handle that are comfortable, and feature pull-resistant handles. Cable cutter: up to 1.6 mm cables.Size: 200mm (8 in)
IRWIN Vise-Grip Long Nose VDE pliers have a chrome nickel steel, induction hardened cutting edges that stay sharper for longer and improved durability. Machined jaws provide maxium grip strength. They are fully TÜV, GS, and VDE certified meaning they are safe for working with electrical equipment upto AC 1000 volts or DC 1500 volts. Featuring moulded, pull-resistant, one component handles for added comfort and less hand fatigue.Length: 200mm (8 in).
The IRWIN Vise-Grip Max Leverge End Cutting Pliers feature PowerSlot Technology, that provides 2X more power and half the cutting effort. They are constructed of high-quality steel and are specially coated for superior rust-resistance and longer tool life. The induction-hardened cutting edges are durable enough to cut ACSR, nails, screws and even piano wire without damaging the cutting edge. They are fitted with industry-leading, three-zone comfort grips that have been contoured for optimal cushion and control allowing the user to make more cuts comfortably. Integrated handle hooks for the Performance Lanyard system, for safer elevated working conditions and easier retrieval when stored. They are made in Germany and backed by IRWIN's Lifetime Guarantee. Capacity: 3mm Hard Wire.
IRWIN Vise-Grip Nipper Pliers with induction hardened cutting edges to stay sharper for longer. They feature machined jaws for maximum gripping strength and moulded ProTouch™ grips for added comfort and less hand fatigue. TüV/GS approved.The Visegrip Irwin VIS10508152 Nipper Pliers come in the following Length: 175mm (7in).
IRWIN Vise-Grip Nipper Pliers with induction hardened cutting edges to stay sharper for longer. They feature machined jaws for maximum gripping strength and moulded ProTouch™ grips for added comfort and less hand fatigue. TüV/GS approved.The IRWIN Vise-grip 10508151 Nipper Pliers come in the followingLength: 200mm (8 inch).
The IRWIN Vise-Grip Performance Lanyard is a patented integrated fastening system designed exclusively for use with specially-equipped IRWIN VISE-GRIP pliers. Allows you to work safely, by attaching clip to pliers handle to help prevent accidental drops when working in elevated conditions. The lanyard also allows the user to find the right tool faster, even when stored in a crowded toolbox.
IRWIN ProTouch™ Vise-Grip pliers, set of three, they have an induction hardened chromium nickel steel cutting face that stay sharper for longer. The pliers also feature machined jaws for maximum gripping strength and moulded ProTouch™ handles for added comfort and less hand fatigue. Diagonal Cutting Pliers: 150mm (6in).Combination Pliers: 175mm (7in).Long Nose Pliers: 200mm (8in).
The IRWIN Vise-Grip Locking pinch-off tool 175mm (7in) provides a temporary seal when applied to tubing, leaving both hands free for other work. Perfect to use for plumbing work as it stops the flow from untidy tubes. Hex key adjusting screw that tightens to draw materials closer together and also provides controlled release. This tool is specially designed for the refrigeration industry. Specification Length: 175mm (7in).Capacity: 6mm.
The IRWIN Vise-Grip Standard Long Nose Pliers are constructed of high-quality steel and are specially coated for superior rust-resistance and longer tool life. The induction-hardened cutting edges are durable enough to cut ACSR, nails, screws and even piano wire without damaging the cutting edge. They are fitted with industry-leading, three-zone comfort grips that have been contoured for optimal cushion and control allowing the user to make more cuts comfortably. Integrated handle hooks for the Performance Lanyard system, for safer elevated working conditions and easier retrieval when stored. They are made in Germany and backed by IRWIN's Lifetime Guarantee. 1950506: 150mm (6in), Capacity: 2mm Hard Wire.1950507: 200mm (8in), Capacity: 2mm Hard Wire.IRWIN Vise-Grip Standard Long Nose Pliers have the following specification: Size: 150mm (6in).Capacity: 2mm Hard Wire.
IRWIN Vise-Grip Fast Release™ Curved Jaw Locking Pliers with wire cutter. Has a one-handed, triggerless release that is 2 times easier to open than traditional locking pliers. Anti-pinch, non-slip ProTouch™ grips provide comfort, control, and less hand fatigue. Curved jaw puts tremendous pressure on four points of any style nut or bolt head, making it perfect for any application that requires maximum torque. Constructed from high-grade heat-treated alloy steel for maximum toughness and durability. Hardened teeth are designed to grip from any angle. Adjusting screw tightens to adjust pressure and draw materials together and provides a controlled release. Backed by the IRWIN VISE-GRIP Lifetime Guarantee.This Set of 2 Irwin Vise-Grip Fast Release™ Curved Jaw Locking Pliers, contains the following: 1 x 7WR: Length: 175mm, Capacity: 38mm. 1 x 10WR: Length: 250mm, Capacity: 48mm.
4 Piece T71 Pliers Set contains the following:1 x 5WR Fast Release™ Curved Jaw Locking Pliers 127mm1 x 6LN Fast Release™ Long Nose Locking Pliers 150mm1 x 7R Fast Release™ Straight Jaw Locking Pliers 175mm1 x 10CR Curved Jaw Locking Pliers 254mm
The IRWIN Vise-Grip 3 piece set comprises of: 2 x Curved Jaw Locking Pliers, ideal for a variety of applications and material shapes. They are made from high-grade heat-treated alloy steel for maximum toughness and durability. The hardened teeth are designed to grip from any angle. The pliers classic trigger release provides maximum locking force. The hex key adjusting screw tightens to adjust pressure and draw materials together and also provides a controlled release. 10WR: Length: 254mm (10in), Capacity: 48mm.5WR: Length: 127mm (5in), Capacity: 29mm. 1 x Locking Long Nose Pliers, they have a powerful locking action. The jaws are long enough to reach into tight spots, whilst the tips are small enough to grip tiny objects. The pliers also incorporate a wire cutter. 6LNC: Length: 150mm (6in), Capacity: 51mm.
The IRWIN Vise-Grip Universal Water Pump Pliers have been designed with twice the number of groove positions of traditional groove joint pliers to deliver optimal hand and jaw positioning and a superior grip. The specially engineered, all-purpose jaw grips round, hex, square and flat surfaces for incredible versatility. Fitted with anti-pinch, non-slip ProTouch™ grips enhance user comfort.These IRWIN Vise-Grip Universal Water Pump Pliers have the following specification: Length: 150mm (6in)Max. Jaw Capacity: 29mm
The IRWIN Vise-Grip Universal Water Pump Pliers have been designed with twice the number of groove positions of traditional groove joint pliers to deliver optimal hand and jaw positioning and a superior grip. The specially engineered, all-purpose jaw grips round, hex, square and flat surfaces for incredible versatility. Fitted with anti-pinch, non-slip ProTouch™ grips enhance user comfort.These IRWIN Vise-Grip Universal Water Pump Pliers have the following specification: Length: 250mm (10in)Max. Jaw Capacity: 57mm
The IRWIN Vise-Grip Universal Water Pump Pliers have been designed with twice the number of groove positions of traditional groove joint pliers to deliver optimal hand and jaw positioning and a superior grip. The specially engineered, all-purpose jaw grips round, hex, square and flat surfaces for incredible versatility. Fitted with anti-pinch, non-slip ProTouch™ grips enhance user comfort.These IRWIN Vise-Grip Universal Water Pump Pliers have the following specification: Length: 300mm (12in)Max. Jaw Capacity: 70mm
Set of 3 IRWIN Vise-Grip VDE Pliers that are fully TUV, GS, and VDE certified meaning they are safe for working with electrical equipment up to AC 1000V or DC 1500V. They have a chrome nickel steel, induction hardened cutting edges that stay sharper for longer and improved durability. Machined jaws provide maxium grip strength. Featuring moulded, pull-resistant one component handles for added comfort and less hand fatigue. VDE Diagonal Cutting Pliers: Length: 150mm (6in).VDE Long Nose Pliers: Length: 200mm (8in).VDE Combination Pliers: Length: 175mm (7in).
IRWIN Vise-Grip VDE wire strippers have a chrome nickel steel, induction hardened cutting edges that stay sharper for longer and improved durability. Machined jaws provide maxium grip strength. They are fully TÜV, GS, and VDE certified meaning they are safe for working with electrical equipment upto AC 1000 volts or DC 1500 volts. Featuring moulded, pull-resistant one component handles for added comfort and less hand fatigue. Will strip cable up to 6 mm in diameter. Length: 150mm (6 in)
Irwin Weldtec Circular Saw Blade with welded carbide teeth for a substantially stronger tooth bond and longer life. The ultra compact carbide is 70% tougher than standard carbide for superior sharpness and cut quality. The blades have innovative heat vents, and the fully hardened plate runs truer for longer and with more accuracy. They have alternate top bevel teeth (ATB) for cross cutting and ripping in all woods. Suitable for use with handheld corded machines.This IRWIN Weldtec Circular Saw Blade has the following specifications: Blade Diameter: 150mm.Bore: 20mm.Teeth: 24.Kerf Thickness: 2.4mm.Tooth Config: ATB.
Irwin Weldtec Circular Saw Blade with welded carbide teeth for a substantially stronger tooth bond and longer life. The ultra compact carbide is 70% tougher than standard carbide for superior sharpness and cut quality. The blades have innovative heat vents, and the fully hardened plate runs truer for longer and with more accuracy. They have alternate top bevel teeth (ATB) for cross cutting and ripping in all woods. Suitable for use with handheld corded machines.This IRWIN Weldtec Circular Saw Blade has the following specifications: Blade Diameter: 150mm.Bore: 20mm.Teeth: 40.Kerf Thickness: 2.4mm.Tooth Config: ATB.
Irwin Weldtec Circular Saw Blade with welded carbide teeth for a substantially stronger tooth bond and longer life. The ultra compact carbide is 70% tougher than standard carbide for superior sharpness and cut quality. The blades have innovative heat vents, and the fully hardened plate runs truer for longer and with more accuracy. They have alternate top bevel teeth (ATB) for cross cutting and ripping in all woods. Suitable for use with handheld corded machines.This IRWIN Weldtec Circular Saw Blade has the following specifications: Blade Diameter: 160mm.Bore: 20mm.Teeth: 18.Kerf Thickness: 2.4mm.Tooth Config: ATB.
Irwin Weldtec Circular Saw Blade with welded carbide teeth for a substantially stronger tooth bond and longer life. The ultra compact carbide is 70% tougher than standard carbide for superior sharpness and cut quality. The blades have innovative heat vents, and the fully hardened plate runs truer for longer and with more accuracy. They have alternate top bevel teeth (ATB) for cross cutting and ripping in all woods. Suitable for use with handheld corded machines.This IRWIN Weldtec Circular Saw Blade has the following specifications: Blade Diameter: 160mm.Bore: 20mm.Teeth: 24.Kerf Thickness: 2.4mm.Tooth Config: ATB.
Irwin Weldtec Circular Saw Blade with welded carbide teeth for a substantially stronger tooth bond and longer life. The ultra compact carbide is 70% tougher than standard carbide for superior sharpness and cut quality. The blades have innovative heat vents, and the fully hardened plate runs truer for longer and with more accuracy. They have alternate top bevel teeth (ATB) for cross cutting and ripping in all woods. Suitable for use with handheld corded machines.This IRWIN Weldtec Circular Saw Blade has the following specifications: Blade Diameter: 165mm.Bore: 30mm.Teeth: 24.Kerf Thickness: 2.4mm.Tooth Config: ATB.
Irwin Weldtec Circular Saw Blade with welded carbide teeth for a substantially stronger tooth bond and longer life. The ultra compact carbide is 70% tougher than standard carbide for superior sharpness and cut quality. The blades have innovative heat vents, and the fully hardened plate runs truer for longer and with more accuracy. They have alternate top bevel teeth (ATB) for cross cutting and ripping in all woods. Suitable for use with handheld corded machines.This IRWIN Weldtec Circular Saw Blade has the following specifications: Blade Diameter: 165mm.Bore: 30mm.Teeth: 40.Kerf Thickness: 2.4mm.Tooth Config: ATB.
