The Irwin 10 piece set of T-shank jigsaw blades for AEG, Bosch, DEWALT and Hitachi Jigsaws for metal and wood cutting are manufactured from high quality materials. Contain the following pieces: 2 x 10504221 (T111C) Wood cutting 100mm 8 tpi.2 x 10504218 (T144D) Wood cutting 100mm 6 tpi (fast cut).2 x 10504219 (T101B) Wood cutting 100mm 10 tpi.1 x 10504222 (T101D) Wood cutting 100mm 6 tpi (clean cut).2 x 10504220 (T118A) Metal cutting 92mm Progressive 17 - 23 tpi.1 x 10504225 (T118B) Metal cutting 92mm Progressive 11 - 13 tpi.
Jigsaw Metal & Wood Cutting Blades made from Bi-Metal which is a highly flexible, tough combination of HSS and HCS which is suitable for the most demanding applications. HSS and BiMetal progressive tooth blade for all-purpose cutting in wood and metal, whilst also extendeding life. T Shank for AEG, Bosch, DEWALT and Hitachi Jigsaws. Progressive tooth spacing for fast cuts, long life in metal 3.5-10mm, wood with nails, particleboard 3.5-90mm, non-ferrous metal, aluminium, plastics 2-30mm Length: 132mm.Pitch: Progressive. Supplied in a pack of 5.
Irwin Junior Saw has a large contoured handle and the blade tensioning screw provides more control and better performance than a standard junior hacksaw. Size: 150mm (6in).
IRWIN® Junior Saw Blades provide improved cutting performance. Their tooth geometry delivers higher resistance against tooth strippage and increases longevity and durability. Leveraging the advantages of WeldTec™ technology, IRWIN® hacksaw blades allow for faster, smoother and less tiring cutting. Can be used on wood. Specification: Length: 150mm (6in)TPI: 14
Irwin I-Gel Knee pads are designed to put maximum protection where it is needed most. The built-in flexibility of knee pads provide long-lasting comfort. Embedded I-Gel insert provides maximum impact resistance. The non-marring cap will not damage surfaces.
Irwin Swivel-Flex knee pads are designed to put maximum protection where it is needed most. The built-in flexibility provides long-lasting comfort. Convex cap design provides better pivoting and less resistance for greater manoeuvrability across surfaces.
Irwin All Terrain knee pads are designed to put maximum protection where it is needed most. The built-in flexibility of these knee pads provides long-lasting comfort. Wide body cap improves user stability on any kind of surface. Comfort features improve wearability.
The IRWIN Large Open Mouth Bag is made from strong, 600 denier fabric that resists wear and tear for lasting durability. Its open-mouth structure enables easy access to tools. With multiple internal and external pockets for maximum organisation. A hard-wearing plastic bottom provides maximum protection from moisture and dirt. It has padded handles and an adjustable shoulder strap for easy carriage of tools. Specification: Max. Load: 20kg
The IRWIN Large Open Tool Tote is made from strong, 600 denier fabric that resists wear and tear for lasting durability. Its rigid open structure enables easy access to tools. With multiple internal and external pockets for maximum organisation. A hard-wearing plastic bottom provides maximum protection from moisture and dirt. It has a padded metal handle and an adjustable shoulder strap for easy carriage of tools. Specification: Max. Load: 20kg
The Irwin Lock-n-Load Quick Change Extension Bit Holders have a LOCK-N-LOAD™ System for one-handed quick release. The jaw design holds bits securely on 6-flatted shanks, as well as ball detent bits. A carbon steel construction sleeve and body ensures durabilty and long life.Irwin Lock-n-Load Quick Change Extension Bit Holder Specifications: Insert bit: Standard 1/4 inch. Length: 150mm.
The Irwin Lock-n-Load Quick Change Extension Bit Holders have a LOCK-N-LOAD™ System for one-handed quick release. The jaw design holds bits securely on 6-flatted shanks, as well as ball detent bits. A carbon steel construction sleeve and body ensures durabilty and long life.Irwin Lock-n-Load Quick Change Extension Bit Holder Specifications: Insert bit: Standard 1/4 inch. Length: 300mm.
The Irwin Lock-n-Load Quick Change Extension Bit Holders have a LOCK-N-LOAD™ System for one-handed quick release. The jaw design holds bits securely on 6-flatted shanks, as well as ball detent bits. A carbon steel construction sleeve and body ensures durabilty and long life.Irwin Lock-n-Load Quick Change Extension Bit Holder Specifications: Insert bit: 3/8 inch. Length: 300mm.
The Irwin Lock-n-Load Quick Change Extension Bit Holders have a LOCK-N-LOAD™ System for one-handed quick release. The jaw design holds bits securely on 6-flatted shanks, as well as ball detent bits. A carbon steel construction sleeve and body ensures durabilty and long life.Irwin Lock-n-Load Quick Change Extension Bit Holder Specifications: Insert bit: Standard 1/4 inch. Length: 65mm.
Irwin magnetic bit holders are specially designed for the higher torque requirements of power tools. They are designed to provide more clearance between the power tool and the fastener. Size: 1/4 in x 50mm.
Irwin 9.5mm Shank Arbor/Mandrel with removable pilot drill for easy replacement. Available in multiple chuck sizes for toughness and long life and with a tough, durable construction.Irwin Mandrel 13 mm (14-30 mm). Sizes : 14-30mm (9/16-1 3/16 in). Shank 13mm (1/2 in) Hex.
Irwin 9.5mm Shank Arbor/Mandrel with removable pilot drill for easy replacement. Available in multiple chuck sizes for toughness and long life and with a tough, durable construction.Irwin Mandrel 13 mm (32-210 mm). Sizes : 32-210 mm (1 1/4 - 6 in).Shank 13mm (1/2 in) Hex.
Irwin 9.5mm Shank Arbor/Mandrel with removable pilot drill for easy replacement. Available in multiple chuck sizes for toughness and long life and with a tough, durable construction.Irwin Mandrel 9.5 mm (14-30 mm). Sizes : 14-30 mm (9/16 -1 3/16 in). Shank : 9.5 mm (3/8 in) Hex
Irwin 9.5mm Shank Arbor/Mandrel with removable pilot drill for easy replacement. Available in multiple chuck sizes for toughness and long life and with a tough, durable construction.Irwin Mandrel 9.5 mm (32-210 mm). Sizes: 32-152mm.Shank: 9.5mm (3/8 in) Hex.
The IRWIN Marples M373 Splitproof Bevel Edge Wood Chisels are ideal for heavy-duty use and have splitproof handles. They are made from best in category steel for improved sharpness and edge retention. The blade, bolster and tang are forged from one piece of steel with edges bevelled to enable easier working in tight corners and they are fitted with two-tone splitproof plastic handles will withstand heavy usage. The handle is also contoured to provide added control. Supplied in a wooden presentation box. Contains the following sizes: 6, 10, 12, 19, 25, 32, 38 and 50mm (1/4, 3/8, 1/2, 3/4, 1, 1.1/4, 1.1/2 and 2in).
The IRWIN Marples 10507932 set of three sharpening tools. The pack contains a honing guide, combination sharpening stone and honing oil. Can be used on all brands and types of chisels.
The IRWIN Marples M2153 Combination Mortice & Marking Gauge is made of sealed rosewood with a brass pull slide to adjust the extra spur for use as a mortice gauge. A knurled brass thumbscrew is used to secure the stock.
IRWIN Marples 2154 Combination Mortice & Marking Gauge is made of sealed rosewood with a brass pull slide to adjust the extra spur for use as a mortice gauge. The knurled brass thumbscrew is used to secure the stock. It has brass facing strips and a thumbscrew adjusting slide.
The IRWIN Marples M2200 Try Square has a sealed hardwood stock faced with brass for extra protection against damage and to give longer life and better accuracy. Bevelled squares are perfect for marking out lines, testing squares and angle lengths. All Marples measuring tools are made from an aluminium block and with a hardened steel blade which is secured by three steel rivets with brass washers, preventing movement. The scales are etched on the surface which ensures long durability. The tools are manufactured according to a very fine tolerances, so all measuring tools are very precise. Also features an edge holder for accurate positioning.Size 150mm (6 in).
The IRWIN Marples M2226 Sliding Bevel made with a sealed rosewood stock. The blade is joined to the stock with a quick-release brass locking lever. Sliding bevels are perfect for marking angle lengths. The slot in the hardened steel blade allows the user to accommodate a wide range of different size work pieces. The scales are etched on the surface which ensures a long durability and they are manufactured according to very fine tolerances, so all Marples measuring tools are very precise. Avalible in the following sizes:MAR22269: 230mm.MAR22261012: 270mm.Size. 230mm (9 in).
Type: 5in rectangle (flat) 125mm. The IRWIN Marples M2450 cabinet scrapers are made from high carbon steel, hardened and tempered to 470 vickers and polished to give a smooth finish. These scrapers have good edge retention but are easily resharpened. Available in the following sizes:MAR2450: 5in Rectangle (flat) 125mm.MAR2451: 6in Rectangle (flat) 150mm.
The IRWIN Marples M373 splitproof bevel edge wood chisels are ideal for heavy-duty use and have split proof handles. They are made from best in category steel for improved sharpness and edge retention. The Blade, bolster and tang are forged from one-piece of steel with edges bevelled to enable easier working in tight corners and they are fitted with two-tone splitproof plastic handles which will withstand heavy usage. The handle is also contoured to provide added control.1 X M373 Splitproof Bevel Edge Wood Chisel 10mm (3/8in).
The IRWIN Marples M373 splitproof bevel edge wood chisels are ideal for heavy-duty use and have split proof handles. They are made from best in category steel for improved sharpness and edge retention. The Blade, bolster and tang are forged from one-piece of steel with edges bevelled to enable easier working in tight corners and they are fitted with two-tone splitproof plastic handles which will withstand heavy usage. The handle is also contoured to provide added control.1 X M373 Splitproof Bevel Edge Wood Chisel 13mm (1/2in).
The IRWIN Marples M373 splitproof bevel edge wood chisels are ideal for heavy-duty use and have split proof handles. They are made from best in category steel for improved sharpness and edge retention. The Blade, bolster and tang are forged from one-piece of steel with edges bevelled to enable easier working in tight corners and they are fitted with two-tone splitproof plastic handles which will withstand heavy usage. The handle is also contoured to provide added control.1 X M373 Splitproof Bevel Edge Wood Chisel 16mm (5/8in).
The IRWIN Marples M373 splitproof bevel edge wood chisels are ideal for heavy-duty use and have split proof handles. They are made from best in category steel for improved sharpness and edge retention. The Blade, bolster and tang are forged from one-piece of steel with edges bevelled to enable easier working in tight corners and they are fitted with two-tone splitproof plastic handles which will withstand heavy usage. The handle is also contoured to provide added control.1 X M373 Splitproof Bevel Edge Wood Chisel 18mm (3/4in).
1 X M373 Splitproof Bevel Edge Wood Chisel 25mm (1in). The IRWIN Marples M373 splitproof bevel edge wood chisels are ideal for heavy-duty use and have splitproof handles. They are made from best in category steel for improved sharpness and edge retention. The blade, bolster and tang are forged from one piece of steel with edges bevelled to enable easier working in tight corners and they are fitted with two-tone splitproof plastic handles which will withstand heavy usage. The handle is also contoured to provide added control.
The IRWIN Marples M373 splitproof bevel edge wood chisels are ideal for heavy-duty use and have split proof handles. They are made from best in category steel for improved sharpness and edge retention. The Blade, bolster and tang are forged from one-piece of steel with edges bevelled to enable easier working in tight corners and they are fitted with two-tone splitproof plastic handles which will withstand heavy usage. The handle is also contoured to provide added control.1 x IRWIN Marples M373 Bevel Edge Chisel Splitproof Handle 32mm (1.1/4in)
The IRWIN Marples M373 splitproof bevel edge wood chisels are ideal for heavy-duty use and have split proof handles. They are made from best in category steel for improved sharpness and edge retention. The Blade, bolster and tang are forged from one-piece of steel with edges bevelled to enable easier working in tight corners and they are fitted with two-tone splitproof plastic handles which will withstand heavy usage. The handle is also contoured to provide added control.1 X M373 Splitproof Bevel Edge Wood Chisel 38mm (1 1/2in).
The IRWIN Marples M373 splitproof bevel edge wood chisels are ideal for heavy-duty use and have split proof handles. They are made from best in category steel for improved sharpness and edge retention. The Blade, bolster and tang are forged from one-piece of steel with edges bevelled to enable easier working in tight corners and they are fitted with two-tone splitproof plastic handles which will withstand heavy usage. The handle is also contoured to provide added control.1 X M373 Splitproof Bevel Edge Wood Chisel 3mm (1/8in).
1 X M373 Splitproof Bevel Edge Wood Chisel 50mm (2in). The IRWIN Marples M373 splitproof bevel edge wood chisels are ideal for heavy-duty use and have splitproof handles. They are made from best in category steel for improved sharpness and edge retention. The blade, bolster and tang are forged from one piece of steel with edges bevelled to enable easier working in tight corners and they are fitted with two-tone splitproof plastic handles which will withstand heavy usage. The handle is also contoured to provide added control.
The IRWIN Marples M373 splitproof bevel edge wood chisels are ideal for heavy-duty use and have split proof handles. They are made from best in category steel for improved sharpness and edge retention. The Blade, bolster and tang are forged from one-piece of steel with edges bevelled to enable easier working in tight corners and they are fitted with two-tone splitproof plastic handles which will withstand heavy usage. The handle is also contoured to provide added control.1 X M373 Splitproof Bevel Edge Wood Chisel 6mm (1/4in).
