The Hultafors 109 Series Wrecking Bars are manufactured from hardened, high-alloy boron steel and have wide, ground contact surfaces and thin ends making them easy to use in narrow spaces and reducing the risk of leaving marks. The claw is optimised for pulling out nails.1 x Hultafors 109/25 Steel Wrecking Bar 635mm (25in).
The Hultafors 109 Series Wrecking Bars are manufactured from hardened, high-alloy boron steel and have wide, ground contact surfaces and thin ends making them easy to use in narrow spaces and reducing the risk of leaving marks. The claw is optimised for pulling out nails.1 x Hultafors 109/28 Steel Wrecking Bar 710mm (28in)
The Hultafors 109 Series Wrecking Bars are manufactured from hardened, high-alloy boron steel and have wide, ground contact surfaces and thin ends making them easy to use in narrow spaces and reducing the risk of leaving marks. The claw is optimised for pulling out nails.1 x Hultafors 109/36 Steel Wrecking Bar 900mm (36in)
The Hultafors 207 Steel Pinch Bar is made from 6-square high quality steel. It has a wide and thin chisel make it easy to use in narrow spaces. The long and cone shaped tip can be used for aligning flanges with bolt holes and the cone tip facilitates the installation of O-rings. The cone shaped tip is long and evenly grinded and both ends are unpainted to avoid discolouration.1 x Hultafors 207 Steel Pinch Bar 400mm (16in)
The Hultafors 207 Steel Pinch Bar is made from 6-square high quality steel. It has a wide and thin chisel make it easy to use in narrow spaces. The long and cone shaped tip can be used for aligning flanges with bolt holes and the cone tip facilitates the installation of O-rings. The cone shaped tip is long and evenly grinded and both ends are unpainted to avoid discolouration.1 x Hultafors 207 Steel Pinch Bar 500mm (20in)
The Hultafors 207 Steel Pinch Bar is made from 6-square high quality steel. It has a wide and thin chisel make it easy to use in narrow spaces. The long and cone shaped tip can be used for aligning flanges with bolt holes and the cone tip facilitates the installation of O-rings. The cone shaped tip is long and evenly grinded and both ends are unpainted to avoid discolouration.1 x Hultafors 207 Steel Pinch Bar 600mm (24in)
The Hultafors 209 SB Adjustable Wrecking Bar is manufactured in high quality steel with ergonomic rubber-clad handle. It's articulated claw is adjustable to nine different positions. With wide, ground contact surfaces and thin ends make it easy to use and reduce the risk of leaving marks. The claw is optimized for pulling out nails. The curved section at the chisel makes space for the hand and minimizes the risk of crushing damage.
The Hultafors 52ME Combination Square can be used as an outside and inside try square, mitre square, depth and marking gauge. It has a stainless steel blade with ground edges, and ends marked in millimetres and inches. The lightweight zinc stock is matt black and is fitted with a scriber. Specification: Size: 300mm (12in)
The Hultafors 58ME Combination Square has a lightweight zinc stock and rule with ground edges and ends. Its centre head enables the accurate location and marking of the centre of circular items.The graduated protractor head can be turned through 360° for measuring and constructing angles. For use outside and inside as a try square, mitre square, depth and marking gauge. Specification: Size: 300mm (12in).
The Hultafors A 1500 SK Aluminium Demolition Pry Bar combines the best features of both a pry bar and a wrecking bar. Its claw with a nail puller makes it an excellent alternative to a wrecking bar. The claw is made from hardened boron steel, broad and robust but still thin enough to provide the best possible access. The long handle provides more power and makes it easier to work with a more ergonomic posture compared to working with a shorter wrecking bar. Made of hollow, specially alloyed aluminium making it light weight and strong at the same time. This low weight compared to steel pry bars and Burke bars makes it more gentle on the body, which is especially important when working above shoulder height.
The Hultafors A 1500 SR Aluminium Pry Bar is manufactured from 'Aerospace aluminium' for high strength and less flexing. Lighter and easier to work with, especially when working at shoulder height. The tip is made of hardened, high-alloy boron steel. As aluminium does not rust, it has a better resistance to extreme temperatures and is also more flexible than steel tools. It can be bent about three times as much as a steel tool without being deformed.
Adjustable Plasterer's Square with millimetre and degree graduations that can be set in four fixed positions (22.5°, 45°, 67.5° and 90°). It also has an additional 21 angles marked on its scale. The stock and blade are made from anodized aluminium and can be folded together, making it easy to store and transport. It can also be switched between right and left position. Blade length: 120cm.Weight: 1150g.
Chalk line with a cast powder-coated aluminium body with a sliding filler cover. The cord is braided cotton/polyester, the cotton absorbs the chalk while the polyester provides the strength and the braid ensures that the cord never tangles. The cord is 1 mm in diameter and has a rupture limit of 16 Kg. 30 m/100 ft. Capacity: 80 g of chalk.
The Hultafors Arvika 5 Star Felling Axe has been specially designed for competition and serious chopping. The design of the head is inspired by Australian Racing Pattern Axes, polished and heavy with a convex grind edge. The long and curved handle in American hickory provides maximum speed and force when felling trees. The axe is hand forged and made from Swedish quality steel in the forge at Hults Bruk. The steel head is struck over 60 times to increase density and durability to the head. Head Weight: 2kg (4.1/2 lbs)Length: 800mmTotal Weight: 2.75kg
Versatile, easy-to-use nail puller. Despite its small size, it can easily pull out a 5 in nail, even when the head of the nail is off or buried deep in the wood. Made of red lacquered hardened steel.
The Hultafors Axe Grinding Stone is an efficient waterstone for easy and safe sharpening of your axe, wherever you are. The grinding stone is of good size and designed to give a steady grip, protecting fingers and hands from cutting injuries. The elegant leather case protects your grinding stone, giving it a longer working life. The rough side has a grain size of 180 and the fine side a grain size of 600, which is a good combination to regain sharpness to your axe. To make your work easier, we would recommend that you grind with water.
This Hultafors B 1500 Aluminium Pry Bar 1500mm 2.8kg is lighter and easier to work with, especially when working at shoulder height. Used for applications such as prizing items onto truck platforms and ripping up formwork. An aluminium tool does not rust, has better resistance to cold and is also more flexible than steel tools. It can be bent about three times as much as a steel tool without being deformed.
The Hultafors Stainless Steel Brick-Mate Tape has a unique blade design with three scales to calculate brick and block quantities and course heights, along with a conventional metric scale accurate to EC Class I. The blade is made from durable stainless-steel tape and fitted with a strong stainless-steel end-hook with a reinforcement plate. The ergonomic ABS case has a non-slip rubber grip pad and easy-to-operate positive action lock, minimising blade slip. With a bump stop for added blade and end-hook protection, and a metal clip for attaching a lanyard when working at heights. Made in Britain. Accuracy: EC Class I.
This Hultafors BT5ME Big T Pocket Tape has metric and imperial graduations. Blade Length: 5m/16ftBlade Width: 19mmAccuracy: EC Class I The Hultafors Big T Pocket Tape has a multitude of user benefits, designed for measuring more quickly, easily and reliably. It has an ultra-tough, wear-resistant steel blade. Accurate to EC Class I, offering the end-user the highest level of measuring accuracy available. Clear-view end-hook mounted below the blade allowing the blade to be read right up to the tip. The tough rubber protected case and patented shock absorber have been designed to survive heavy on-site use. Exact inside measurements are possible with the 100mm case size making add-ons easy with the mouth cursor showing the precise reading (the 5m model has a flip-out arm). It also has a unique snap-in, quick-release belt clip holster. Available with both metric and imperial graduations or metric only. Made in Britain.
The Hultafors Carpenter's Square is made of 1.5mm thick high-strength steel, cut with precision laser, provides a durable and high precision product. There is a millimetre graduation on the front and back side of the square. There is also an additional angle scale on the backside, with two pivot points, one for 1-20° and one for 20-89°.Made in Europe with full control over working conditions and sustainability.
1 x Hultafors Carpenter's Square 100cm
The Hultafors Carpenter's Square is made of 1.5mm thick high-strength steel, cut with precision laser, provides a durable and high precision product. There is a millimetre graduation on the front and back side of the square. There is also an additional angle scale on the backside, with two pivot points, one for 1-20° and one for 20-89°.Made in Europe with full control over working conditions and sustainability.
1 x Hultafors Carpenter's Square 60cm
The Hultafors Carpenter's Square is made of 1.5mm thick high-strength steel, cut with precision laser, provides a durable and high precision product. There is a millimetre graduation on the front and back side of the square. There is also an additional angle scale on the backside, with two pivot points, one for 1-20° and one for 20-89°.Made in Europe with full control over working conditions and sustainability.
1 x Hultafors Carpenter's Square 80cm
The Hultafors CC10FME Steel Long Tape has both metric and imperial measurements. Specifications: Blade Length: 10m/33ft.Blade Width: 13mm.Accuracy: EC Class II.
This Hultafors CC10ME Steel Long Tape has metric and imperial graduations. Specifications: Blade Length: 10m/33ft.Blade Width: 10mm.Accuracy: EC Class I.
