These Bahco 2421S ERGO™ Insulated Flat Nose Pliers have the following specification: Length: 180mm (7in) Bahco ERGO™ Insulated Flat Nose Pliers have been designed for gripping flat material. The tips provide good grip and improved accessibility in confined spaces. Made from high-performance alloy steel with a phosphate finish and anti-corrosion treated. Fitted with two-component ERGO™ insulated handles (thermoplastic surface on a tough polypropylene base) to provide superior grip. Suitable for working on live equipment up to 1,000V in compliance with IEC 60900. Every tool is tested at 10,000V for 10 seconds at the end of the manufacturing process. Developed according to the scientific ERGO™ process. Conform to ISO 5745, IEC 60900 standards.
Bahco Bent Snipe Nose Plier with ERGO™ handles for comfort. The tips angled at 60°, and slim, semi-circular shaped serrated jaws. Accurately machined jaws provide a sure grip on the workpiece. Tips give good grip and improved accessibility in confined spaces. Sharp edges for cutting softer material such as copper wire and plastic insulated wire. Equipped with return spring with on/off function. SpecificationLength: 160mm (6.1/4in).Jaw length: 46mm.Weight: 170g.
Bahco ERGO™ Insulated Pliers with 45° bent, half-round serrated jaws for gripping flat and round material. The hardened cutting edges are suitable for cutting soft and hard wire. Made from high-performance alloy steel with a phosphate finish and anti-corrosion treated. Fitted with two-component ERGO™ insulated handles (thermoplastic surface on a tough polypropylene base) to provide superior grip. Suitable for working on live equipment up to 1,000V in compliance with IEC 60900. Every tool is tested at 10,000V for 10 seconds at the end of the manufacturing process. Developed according to the scientific ERGO™ process. Conform to ISO 5745, IEC 60900 standards. Specification: Length: 200mm (8in)Cutting Capacity: Copper 3mm, Iron 1.8mm, Iron Alloy 1.6mm
Bahco ERGO™ Insulated Bent Nose Pliers have half-round serrated jaws for gripping flat and round material. The hardened cutting edges are suitable for cutting soft and hard wire. Made from high-performance alloy steel with a phosphate finish and anti-corrosion treated. Fitted with two-component ERGO™ insulated handles (thermoplastic surface on a tough polypropylene base) to provide superior grip. Suitable for working on live equipment up to 1,000V in compliance with IEC 60900. Every tool is tested at 10,000V for 10 seconds at the end of the manufacturing process. Developed according to the scientific ERGO™ process. Conform to ISO 5745, IEC 60900 standards. Specification: Length: 160mm (6.1/4in)Cutting Capacity: Copper 2.5-3mm, Iron 1.4mm, Iron Alloy 1.6mm
Bahco Long Nose Pliers developed according to the scientific ERGO™ process. The handles allow the vast majority of users to apply the greatest possible force with the least possible effort by combining hard polypropylene for the core and a softer elastomer for the surface. This combination of materials provides a firm, non-slip grip for the hand. Have serrated jaws, and they have a black oxidised and anti-corrosion treated finish. Tips give good grip and improved accessibility in confined spaces. Sharp edges for cutting softer material such as copper and plastic insulated wire.1 x Bahco 2430G ERGO™ Long Nose Pliers 140mm (5.1/2in)
Bahco Long Nose Pliers developed according to the scientific ERGO™ process. The handles allow the vast majority of users to apply the greatest possible force with the least possible effort by combining hard polypropylene for the core and a softer elastomer for the surface. This combination of materials provides a firm, non-slip grip for the hand. Have serrated jaws, and they have a black oxidised and anti-corrosion treated finish. Tips give good grip and improved accessibility in confined spaces. Sharp edges for cutting softer material such as copper and plastic insulated wire.1 x Bahco 2430G ERGO™ Long Nose Pliers 160mm (6.1/4in)
Bahco Long Nose Pliers developed according to the scientific ERGO™ process. The handles allow the vast majority of users to apply the greatest possible force with the least possible effort by combining hard polypropylene for the core and a softer elastomer for the surface. This combination of materials provides a firm, non-slip grip for the hand. Have serrated jaws, and they have a black oxidised and anti-corrosion treated finish. Tips give good grip and improved accessibility in confined spaces. Sharp edges for cutting softer material such as copper and plastic insulated wire.1 x Bahco 2430G ERGO™ Long Nose Pliers 200mm (8in)
These Bahco 2430S ERGO™ Insulated Long Nose Pliers have the following specification: Length: 140mm (5.1/2in)Cutting Capacity: Copper 2.5mm, Iron 1.8mm, Iron Alloy 1.4mm Bahco ERGO™ Insulated Long Nose Pliers have half-round serrated jaws for gripping flat and round material. The hardened cutting edges are suitable for cutting soft and hard wire. Made from high-performance alloy steel with a phosphate finish and anti-corrosion treated. Fitted with two-component ERGO™ insulated handles (thermoplastic surface on a tough polypropylene base) to provide superior grip. Suitable for working on live equipment up to 1,000V in compliance with IEC 60900. Every tool is tested at 10,000V for 10 seconds at the end of the manufacturing process. Developed according to the scientific ERGO™ process. Conform to ISO 5745, IEC 60900 standards.
1 x Bahco 2430S ERGO™ Insulated Long Nose Pliers 160mm (6.1/4in) Cutting Capacity; Copper 3mm, Iron 1.8mm, Iron Alloy 1.6mm Bahco ERGO™ Insulated Long Nose Pliers have half-round serrated jaws for gripping flat and round material. The hardened cutting edges are suitable for cutting soft and hard wire. Made from high-performance alloy steel with a phosphate finish and anti-corrosion treated. Fitted with two-component ERGO™ insulated handles (thermoplastic surface on a tough polypropylene base) to provide superior grip. Suitable for working on live equipment up to 1,000V in compliance with IEC 60900. Every tool is tested at 10,000V for 10 seconds at the end of the manufacturing process. Developed according to the scientific ERGO™ process. Conform to ISO 5745, IEC 60900 standards.
These Bahco 2430S ERGO™ Insulated Long Nose Pliers have the following specification: Length: 200mm (8in)Cutting Capacity: Copper 3mm, Iron 1.8mm, Iron Alloy 1.6mm Bahco ERGO™ Insulated Long Nose Pliers have half-round serrated jaws for gripping flat and round material. The hardened cutting edges are suitable for cutting soft and hard wire. Made from high-performance alloy steel with a phosphate finish and anti-corrosion treated. Fitted with two-component ERGO™ insulated handles (thermoplastic surface on a tough polypropylene base) to provide superior grip. Suitable for working on live equipment up to 1,000V in compliance with IEC 60900. Every tool is tested at 10,000V for 10 seconds at the end of the manufacturing process. Developed according to the scientific ERGO™ process. Conform to ISO 5745, IEC 60900 standards.
This tenon saw is ideal for precision work with its extra fine toothing, hardpoint teeth for durability and can be used in mitre boxes. Cut: Fine (hardpoint) 13 tpi. Length: 300mm (12in).
The Bahco 244-20 Laminator Handsaw is perfect for cutting medium thick materials, such as laminate and wood flooring. It has a thicker blade for increased stability and precision with universal toothing, hardpoint teeth for long lasting sharpness. It is fitted with a screwed 2-component handle that can be used for approximate 45° and 90° marking guide. Specification Length: 500mm (20in).Teeth: 8 tpi.
The Bahco 244 Hardpoint Handsaws feature a universal tooth set with high frequency hardened teeth giving up to 5x the life of conventional teeth. Particularly effective for cross cut and rip performance on chipboard, hardboard and hardwood. The plastic handle incorporates 45º and 90º marking guides and is securely screwed to the blade.The Bahco 244-20-U7/8-HP Hard point Handsaw has the following specification: Blade Length: 500mm (20in).Tooth Pitch: 7 tpi.Type: Universal Hard point
The Bahco 244 Hardpoint Handsaws feature a universal tooth set with high frequency hardened teeth giving up to 5x the life of conventional teeth. Particularly effective for cross cut and rip performance on chipboard, hardboard and hardwood. The plastic handle incorporates 45º and 90º marking guides and is securely screwed to the blade.The 244 PRC saw is ideal for precision work, with fine toothing for a perfect result. Cut: fine Blade length: 550mm (22 in) Type: Universal hardpoint 9 tpi
The Bahco 244 Hardpoint Handsaws feature a universal tooth set with high frequency hardened teeth giving up to 5x the life of conventional teeth. Particularly effective for cross cut and rip performance on chipboard, hardboard and hardwood. The plastic handle incorporates 45º and 90º marking guides and is securely screwed to the blade.The Bahco 244-22-U7/8-HP Hardpoint Handsaw has the following specification: Blade Length: 550mm (22in).Tooth Pitch: 7 tpi.Type: Universal Hardpoint
The Bahco 244+ Barracuda Handsaw is a high-quality general purpose hard point saw suitable for cutting softwood, worktops, chipboard and MDF. The Super sharp toothing and thicker blade offer faster cutting with improved stability and precision during use and the screwed 2-component handle can be used for approximate 45° and 90° marking guides.This Bahco 244P-20-U7-HP Barracuda Handsaw has the following specification: Blade Length: 500mm (20in).Tooth Pitch: 7 tpi.Type: Universal hard point.
The Bahco 244+ Barracuda Handsaw is a high-quality general purpose hard point saw suitable for cutting softwood, worktops, chipboard and MDF. The Super sharp toothing and thicker blade offer faster cutting with improved stability and precision during use and the screwed 2-component handle can be used for approximate 45° and 90° marking guides.This Bahco 244P-22-U7-HP Barracuda Handsaw has the following specification: Blade Length: 550mm (22in).Tooth Pitch: 7 tpi.Type: Universal hard point.
The Bahco 244P-22-XT Blue XT Handsaw is suitable for cutting coarse or thick wood materials. It has unique XT-toothing and hardpoint teeth for long-lasting sharpness. It has two sets of teeth that work in conjunction with each other, one set cuts and the second set clears with each stroke. In addition, the blade has a low friction, anti corrosion blue coating. This is a powder coating is magnetically bonded to the blade and teeth, leaving it rust proof and easy to use. The saw's screwed, 2-component handle can be used as an approximate 45° and 90° marking guide and increases user comfort. Specification Length: 550mm (22in).Blade thickness: 1.03mm.Teeth: 9 tpi.
The Bahco Parallel Snipe Nose Pliers are made from high performance alloyed steel with a polished and lacquered finish for increased rust protection. Fitted with two component handles. The jaws have a slim semi-circular shape with serrated contact surfaces. The cutting edge is suitable for severing soft material such as copper and plastic insulated wire.1 x Bahco 2470G Snipe Nose Pliers 160mm (6.1/4in)
The Bahco Parallel Snipe Nose Pliers are made from high performance alloyed steel with a polished and lacquered finish for increased rust protection. Fitted with two component handles. The jaws have a slim semi-circular shape with serrated contact surfaces. The cutting edge is suitable for severing soft material such as copper and plastic insulated wire.1 x Bahco 2470G Snipe Nose Pliers 200mm (8in)
The Bahco 2471G Flat Nose Pliers are made from alloyed steel with a lacquered and polished finish for increased protection against rust. Fitted with high performance, two-component handles for increased comfort. Conform to ISO 5745.
Bahco Bent Snipe Nose Pliers with semi-circular shaped jaws and serrated contact surfaces. The cutting edge is suitable for severing soft material such as copper and plastic insulated wire.
Bahco XT Hardpoint Handsaw has a thicker blade than conventional handsaws and hardpoint teeth with patented XT tooth geometry give significantly faster cutting performance both across and along the grain. The handle is placed lower on the blade giving an even distribution of power along the toothline. Blade Length: 550mm (22in).Teeth: 9 tpi.
Cable Cutter for cutting Aluminium/Copper cables (telephone cables, electrical cables etc) with or without messenger wire. Recommended maximum capacity: Alu/copper diameter of 30mm with a messenger wire (1800 N/mm2) of 6mm. Warning: for a maximum service life, the sharpened parts of the blades must never be used on ferrous material. For this purpose, use the notches on the blades.
Bahco Round Nose Pliers developed according to the scientific ERGO™ process, and are perfect for wire-bending work. They have a black oxidised finish that is anti-corrosive. Two component handles provide a thermo plastic surface on tough polypropylene for a superior grip.
These Bahco 2521S ERGO™ Insulated Round Nose Pliers have the following specification: Length: 140mm (5.1/2in) Bahco ERGO™ Insulated Round Nose Pliers have been specifically designed for wire bending and have round thin tips for improved accessibility. Made from high-performance alloy steel with a phosphate finish and anti-corrosion treated. Fitted with two-component ERGO™ insulated handles (thermoplastic surface on a tough polypropylene base) to provide superior grip. Suitable for working on live equipment up to 1,000V in compliance with IEC 60900. Every tool is tested at 10,000V for 10 seconds at the end of the manufacturing process. Developed according to the scientific ERGO™ process. Conform to ISO 5745, IEC 60900 standards.
These Bahco 2521S ERGO™ Insulated Round Nose Pliers have the following specification: Length: 160mm (6.1/4in) Bahco ERGO™ Insulated Round Nose Pliers have been specifically designed for wire bending and have round thin tips for improved accessibility. Made from high-performance alloy steel with a phosphate finish and anti-corrosion treated. Fitted with two-component ERGO™ insulated handles (thermoplastic surface on a tough polypropylene base) to provide superior grip. Suitable for working on live equipment up to 1,000V in compliance with IEC 60900. Every tool is tested at 10,000V for 10 seconds at the end of the manufacturing process. Developed according to the scientific ERGO™ process. Conform to ISO 5745, IEC 60900 standards.
The Bahco 255-17/34 ProfCut Concrete Saw is suitable for sawing lightweight cellular concrete blocks. It has a two component handle which ensures a comfortable and safe grip. Its extra long blade is equipped with cemented, carbide tipped toothing with a carbide tip on every second tooth. Length: 620mm (24.5in).
Bahco ProfCut Hardpoint Block Saw is a block saw with extra large hardpoint teeth for sawing lightweight cellular concrete blocks. Has a two-component handle which ensures a comfortable and safe grip. Length: 650mm (26in).Teeth: 2 tpi.
Bahco XT-HP Handsaw Superior range has a thicker blade than conventional handsaws, and is developed according to the scientific ERGO™ process. Has hardpoint teeth, and a black, friction reducing blade coating. Two component construction with softer plastic in the grip area. Gives very fast cutting on modern medium hard materials such as chipboard or plastics. Length: 550mm (22in).9 tpi.
Bahco Combination Pliers with ERGO™ handles that can be used for both holding and cutting. The jaws are slimmer than standard products, have smooth rounded contours to provide maximum accessibility and have a phosphated and anti-rust protected finish. The handles of these pliers are designed to allow the vast majority of users to apply the greatest possible force with the least amount of effort by combining hard polypropylene for the core and a softer elastomer for the surface. This combination of materials provides a firm, non-slip grip for the hand. These pliers are also fitted with a return spring which can be engaged or disengaged in an instant.These Bahco Combination Pliers have the following specification: Length: 160mm (6.1/4in).Jaw Length: 33mm.Cutting ;Capacity: ;Piano: ;1.8mm, Hard: 2.0mm.Weight: 200g.
Bahco Combination Pliers with ERGO™ handles that can be used for both holding and cutting. The jaws are slimmer than standard products, have smooth rounded contours to provide maximum accessibility and have a phosphated and anti-rust protected finish. The handles of these pliers are designed to allow the vast majority of users to apply the greatest possible force with the least amount of effort by combining hard polypropylene for the core and a softer elastomer for the surface. This combination of materials provides a firm, non-slip grip for the hand. These pliers are also fitted with a return spring which can be engaged or disengaged in an instant.These Bahco Combination Pliers have the following specification: Length: 180mm (7in).Jaw Length: 36mm.Cutting ;Capacity: ;Piano: 2.0mm, Hard: 2.5mm.Weight: 245g.
Bahco Combination Pliers with ERGO™ handles that can be used for both holding and cutting. The jaws are slimmer than standard products, have smooth rounded contours to provide maximum accessibility and have a phosphated and anti-rust protected finish. The handles of these pliers are designed to allow the vast majority of users to apply the greatest possible force with the least amount of effort by combining hard polypropylene for the core and a softer elastomer for the surface. This combination of materials provides a firm, non-slip grip for the hand. These pliers are also fitted with a return spring which can be engaged or disengaged in an instant.These Bahco Combination Pliers have the following specification: Length: 200mm (8in).Jaw Length: 39mm.Cutting ;Capacity: ;Piano: ;2.5mm, Hard: 3.0mm.Weight: 300g.
1 x Bahco 2628S ERGO™ Insulated Combination Pliers 160mm (6.1/4in) Cutting Capacity; Iron Alloy 2mm, Piano Wire 1.8mm Bahco ERGO™ Insulated Combination Pliers have a special head design for better accessibility and hardened cutting edges for cutting soft and hard wire. Its gripping surfaces are particularly suited for flat and round material. Made from high-performance alloy steel with a phosphate finish and anti-corrosion treated. Fitted with two-component ERGO™ insulated handles (thermoplastic surface on a tough polypropylene base) to provide superior grip. Suitable for working on live equipment up to 1,000V in compliance with IEC 60900. Every tool is tested at 10,000V for 10 seconds at the end of the manufacturing process. Developed according to the scientific ERGO™ process. Conform to ISO 5745, IEC 60900 standards.
1 x Bahco 2628S ERGO™ Insulated Combination Pliers 180mm (7in) Cutting Capacity; Iron Alloy 2.5mm, Piano Wire 2.0mm Bahco ERGO™ Insulated Combination Pliers have a special head design for better accessibility and hardened cutting edges for cutting soft and hard wire. Its gripping surfaces are particularly suited for flat and round material. Made from high-performance alloy steel with a phosphate finish and anti-corrosion treated. Fitted with two-component ERGO™ insulated handles (thermoplastic surface on a tough polypropylene base) to provide superior grip. Suitable for working on live equipment up to 1,000V in compliance with IEC 60900. Every tool is tested at 10,000V for 10 seconds at the end of the manufacturing process. Developed according to the scientific ERGO™ process. Conform to ISO 5745, IEC 60900 standards.
1 x Bahco 2628S ERGO™ Insulated Combination Pliers 200mm (8in) Cutting Capacity; Iron Alloy 3mm, Piano Wire 2.5mm Bahco ERGO™ Insulated Combination Pliers have a special head design for better accessibility and hardened cutting edges for cutting soft and hard wire. Its gripping surfaces are particularly suited for flat and round material. Made from high-performance alloy steel with a phosphate finish and anti-corrosion treated. Fitted with two-component ERGO™ insulated handles (thermoplastic surface on a tough polypropylene base) to provide superior grip. Suitable for working on live equipment up to 1,000V in compliance with IEC 60900. Every tool is tested at 10,000V for 10 seconds at the end of the manufacturing process. Developed according to the scientific ERGO™ process. Conform to ISO 5745, IEC 60900 standards.
