This hacking knife has a steel blade with twin leather scales riveted to the shaft. It can be struck with a hammer to remove old putty from window frames. Size: 4.1/2in.
The Footprint Grooved Plugging Chisel is used to remove the mortar and cement from between brick and block work. Made from a single, fully forged piece of carbon steel that has been harden and tempered for increased strength and durability. The cutting edge is wider than the blade with a centre groove for rapid debris removal. The domed head design prevents splintering from continued striking with a hammer. Made in Sheffield, Britain. Blade Width: 16mm.Chisel Length: 265mm.1 x Footprint 1860 Grooved Plugging Chisel
The Footprint Grooved Plugging Chisel is used to remove the mortar and cement from between brick and block work. Made from a single, fully forged piece of carbon steel that has been harden and tempered for increased strength and durability. The cutting edge is wider than the blade with a centre groove for rapid debris removal. The domed head design prevents splintering from continued striking with a hammer. Made in Sheffield, Britain. Blade Width: 16mm.Chisel Length: 265mm.The Footprint 1861 Grooved Plugging Chisel is supplied with a British made high visibility, high quality protective plastic moulded grip.
A 3 piece rectangular Cabinet Scraper set. Made from the finest European Steel. Ideal for the fine finishing of wood. Comprises 1 of each:- 6 x 3 inch Scraper5 x 2 1/2 inch Scraper4 x 2 inch Scraper
A 3 piece Shaped Cabinet Scraper set. Made from the finest European Steel. Ideal for the fine finishing of wood. Comprises:- 1 Oblong Scraper1 Curved Scraper1 Goose Neck Scraper
The Footprint 246 Dovetail Saw is made from high quality spring alloy steel, the blade can be re-sharpened time and time again. The teeth have been precision ground and set to ensure a clean cut. A heavy-duty brass back provides rigidity and support to the blade, giving a great cutting feel. The handle is made from an attractive two tone lacquered beechwood. It is of a traditional design providing superb comfort and strength adding to the feel and balance of the saw. Three brass screws securely fit the handle to the saw blade. Made in Sheffield, England. Blade Length: 200mm (8in).Teeth: 20 tpi.
The Footprint Tenon Saw is traditionally used for cutting tenon joints and other detailed sawing requirements. Made from high quality spring alloy steel, the blade can be re-sharpened time and time again. The teeth have been precision ground and set to ensure a clean cut. A heavy-duty brass back provides rigidity and support to the blade, giving a great cutting feel. The handle is made from an attractive two tone lacquered beechwood. It is of a traditional design providing superb comfort and strength adding to the feel and balance of the saw. Three brass screws securely fit the handle to the saw blade. Made in Sheffield, England.Footprint 256 Brass Back Tenon Saw has the following specification: Size: 250mm (10in).Teeth: 15tpi.
The Footprint Tenon Saw is traditionally used for cutting tenon joints and other detailed sawing requirements. Made from high quality spring alloy steel, the blade can be re-sharpened time and time again. The teeth have been precision ground and set to ensure a clean cut. A heavy-duty brass back provides rigidity and support to the blade, giving a great cutting feel. The handle is made from an attractive two tone lacquered beechwood. It is of a traditional design providing superb comfort and strength adding to the feel and balance of the saw. Three brass screws securely fit the handle to the saw blade. Made in Sheffield, England.Footprint 256 Brass Back Tenon Saw has the following specification: Length: 300mm (12in).Teeth: 13 tpi.
The Footprint Tenon Saw is traditionally used for cutting tenon joints and other detailed sawing requirements. Made from high quality spring alloy steel, the blade can be re-sharpened time and time again. The teeth have been precision ground and set to ensure a clean cut. A heavy-duty brass back provides rigidity and support to the blade, giving a great cutting feel. The handle is made from an attractive two tone lacquered beechwood. It is of a traditional design providing superb comfort and strength adding to the feel and balance of the saw. Three brass screws securely fit the handle to the saw blade. Made in Sheffield, England.Footprint 256 Brass Back Tenon Saw has the following specification: Length: 350mm (14in).Teeth: 13 tpi.
The Footprint No.35 Bolsters and Chisels merchandiser stand is an essential part of any hand tool retailer. The stand contains the following products: 3 x Brick Bolsters 75mm (3in)2 x Brick Bolsters with Guards 75mm (3in) 3 x Brick Bolsters 100mm (4in)2 x Brick Bolsters with Guards 100mm (4in) 3 x Plugging Chisels2 x Plugging Chisels with Guards 3 x Flooring Chisels2 x Flooring Chisels with Guards 4 x Long Flooring Chisels 3 x Scutch Chisels 25mm (1in)3 x Scutch Chisels 38mm (1.1/2in) 3 x Cold Chisels 250 x 25mm (10 x 1in)2 x Cold Chisels with Guards 250 x 25mm (10 x 1in)
The Footprint No.45 Bolsters and Chisels merchandiser stand is an essential part of any hand tool retailer. The stand contains the following products: 6 x Brick Bolsters 75mm (3in)6 x Brick Bolsters 100mm (4in)3 x Brick Bolsters 114mm (4.1/2in) 6 x Flooring/Electrician's Chisels 6 x Plugging Chisels 3 x Cold Chisels 177 x 19mm (7 x 3/4in)3 x Cold Chisels 200 x 19mm (8 x 3/4in)3 x Cold Chisels 228 x 22mm (9 x 7/8in)3 x Cold Chisels 250 x 25mm (10 x 1in) 3 x Scutch Chisels 25mm (1in)3 x Scutch Chisels 38mm (1.1/2in)
For detachable stone dressing combs which are used for preparation of surface prior to re-rendering. Manufactured to British standard.Footprint 578 Scutch Comb Holder 1in
The Footprint Brick Jointer can be used to smooth and shape a mortar joint into a concave shape to keep moisture from penetrating the joint. It is made from carbon steel and is furnace hardened for a longer working life. Its polished finish prevents premature rusting. Size: 12mm (1/2in) x 16mm (5/8in).
The Footprint 620 Line Pins are made from drop forged, hardened steel with a chrome plated finish. Designed for use when building a wall. Use in conjunction with a length of nylon cord or builders string to make sure that a course of bricks is straight and true. Length: 6.1/4in.1 x Footprint 620B Line Pin Supplied as a single, loose.
The Footprint 620 Line Pins are made from drop forged, hardened steel with a chrome plated finish. Designed for use when building a wall. Use in conjunction with a length of nylon cord or builders string to make sure that a course of bricks is straight and true. Length: 6.1/4in.2 x Footprint 620 Line Pins. Supplied as a card of 2.
This Footprint set is ideal for people new to bricklaying or for the seasoned professional who requires the best quality products. The set contains: 2 x Line Pins1 x Brick Jointer1 x 18m Nylon White Line
The Footprint Pipe Wrenches have drop forged hooks and are fitted to a pressed steel frame. The teeth are induction hardened to ensure a high grip is maintained. This traditional plumber's tool is an all purpose wrench which grips the workpiece tighter as more pressure is exerted. Removable screw for easy adjustment. This style has a screwdriver end on the handle.The Footprint 69812w Pipe Wrench has the following specification: Length: 300mm (12in).Jaw Capacity: 60mm.
The Footprint Pipe Wrenches have drop forged hooks and are fitted to a pressed steel frame. The teeth are induction hardened to ensure a high grip is maintained. This traditional plumber's tool is an all purpose wrench which grips the workpiece tighter as more pressure is exerted. Removable screw for easy adjustment. This style has a screwdriver end on the handle.The Footprint 6987w Pipe Wrench has the following specification: Length: 175mm (7in).Jaw Capacity: 42mm.
The Footprint Pipe Wrenches have drop forged hooks and are fitted to a pressed steel frame. The teeth are induction hardened to ensure a high grip is maintained. This traditional plumber's tool is an all purpose wrench which grips the workpiece tighter as more pressure is exerted. Removable screw for easy adjustment. This style has a screwdriver end on the handle.The Footprint 6989w Pipe Wrench has the following specifcation: Length: 230mm (9in).Jaw Capacity: 48mm.
The Footprint Pipe Wrenches feature a thumbturn knurled nut which provides easy adjustment with one hand. The teeth are induction hardened to ensure a high grip is maintained. This style has a rounded end to the hook handle.The Footprint 90012w Thumbturn Pipe Wrench has the following specifcations: Length: 300mm (12in).Jaw Capacity: 60mm.
The Footprint Pipe Wrenches feature a thumbturn knurled nut which provides easy adjustment with one hand. The teeth are induction hardened to ensure a high grip is maintained. This style has a rounded end to the hook handle.The Footprint 9007w Thumbturn Pipe Wrench has the following specifcations: Length: 175mm (7in).Jaw Capacity: 40mm.
The Footprint Pipe Wrenches feature a thumbturn knurled nut which provides easy adjustment with one hand. The teeth are induction hardened to ensure a high grip is maintained. This style has a rounded end to the hook handle.The Footprint 9009w Thumbturn Pipe Wrench has the following specifcations: Length: 230mm (9in).Jaw Capacity: 50mm.
Footprint Brick Bolsters have a fully drop forged design for cutting bricks and other general building uses. Hardened and tempered blade to provide a long lasting, accurately ground cutting edge. The handle blade and head are drop forged as a whole for increased strength and durability. The domed head design prevents splintering from continued striking with a hammer. Manufactured to BS3066. Made in the UK.1 x Footprint Brick Bolster 75mm (3in)
The Footprint Brick Bolsters are fully drop forged, making them ideal for heavy-duty use such as cutting bricks and other general building uses. The bolsters provide extra strength because the handle, blade and head are drop forged as a whole rather than just forging the blade. The blade is specially hardened and tempered to provide a long lasting edge. The bolsters have a domed head which helps to extend the usable life by preventing splintering and mushrooming from continued use. They are fitted with a high quality hand guard for added safety. Made in the UK.Manufactured to BS3066.Size: 100mm (4in).
The Footprint Brick Bolsters are fully drop forged, making them ideal for heavy-duty use such as cutting bricks and other general building uses. The bolsters provide extra strength because the handle, blade and head are drop forged as a whole rather than just forging the blade. The blade is specially hardened and tempered to provide a long lasting edge. The bolsters have a domed head which helps to extend the usable life by preventing splintering and mushrooming from continued use. They are fitted with a high quality hand guard for added safety. Made in the UK.Manufactured to BS3066.Size: 75mm (3in).
This Footprint Club Hammer has a forged, hardened and tempered head, and a solid fibreglass core handle for strength. Its thick rubberised grip provides superior comfort when striking objects and helps to absorb shock. A large safety loop allows tethering the hammer for working at height.Head Weight: 1.13kg (2.1/2lb)
This Footprint Club Hammer has a forged, hardened and tempered head, and a solid fibreglass core handle for strength. Its thick rubberised grip provides superior comfort when striking objects and helps to absorb shock. A large safety loop allows tethering the hammer for working at height.Head Weight: 1.8kg (4lb)
This Footprint Cold Chisel is ideal for use on stone, masonry, brick work and other similar materials. It has a heavy-duty design and is made from a fully drop forged single piece of Carbon Steel. The cutting edge is hardened and ground for a longer life, and the domed anti-mushroom head prevents splintering. Made in Sheffield, Britain.1 x Footprint Cold Chisel 250 x 25mm
This Footprint Cold Chisel is ideal for use on stone, masonry, brick work and other similar materials. It has a heavy-duty design and is made from a fully drop forged single piece of Carbon Steel. The cutting edge is hardened and ground for a longer life, and the domed anti-mushroom head prevents splintering. Made in Sheffield, Britain.The cold chisel has a comfortable hand grip for extra safety.
This Footprint Flooring Chisel is a traditional tool for lifting floor boards, chasing plaster etc. The chisel is made from carbon steel with a hardened and tempered blade. It is forged with a domed, anti-mushroom head. Not suitable for use on concrete or stone. Size: 230 x 15 x 57mm (9 x 5/8 x 2.1/4in).
These Footprint Heavy-duty Knife Blades are suitable for cutting a variety of materials, including carpet, vinyl, cardboard, leather and canvas. The blades have been oiled to prevent rusting and are suitable to fit most trimming knives. They are supplied in a high-visibility, wall-mountable container. Pack quantity: 100
Footprint Scutch Combs are made from hardened and tempered steel for extra strength and durability. Zinc coated to prevent rust, wear and tear. They are also double-sided. Used to cut and shape stone and brickwork. Specification: Size: 25mm (1in)Pack Quantity: Jar of 100
