Flex Power Tools SV VE25 Xtreme Sandpaper Sheets with extraction holes. These universal sanding sheets are suitable for a wide range of renovation, refurbishment and modernisation jobs. Paints, varnishes, putties and fillers can be worked efficiently. Ideally suited to woodworking. This sandpaper can be used to remove old coats of paint and varnish, level out unevenness and smooth wooden surfaces.
Pack of 25 Flex Power Tools SV-P120 VE25 Xtreme Sandpaper Sheets 100 x 150mm x P 120Suitable for: ODE 2-100 18-EC, ODE 2-100 18-EC C, ODE 2-100 ECSpecifications:Length x Width: 100 x 150mmGrit: P 120
Flex Power Tools 80 x 133 SV VE25 Xtreme Sandpaper Sheets with extraction holes. These universal sanding sheets are suitable for a wide range of renovation, refurbishment and modernisation jobs. Paints, varnishes, putties and fillers can be worked efficiently. Ideally suited to woodworking. This sandpaper can be used to remove old coats of paint and varnish, level out unevenness and smooth wooden surfaces.
Pack of 25 Flex Power Tools SV-P120 VE25 Xtreme Sandpaper Sheets 80 x 133mm x P 120Suitable for: OSE 2-80 18-EC, OSE 2-80 18-EC C, OSE 2-80 ECSpecifications:Length x Width: 80 x 133mmGrit: P 120
Flex Power Tools 80 x 133 SV VE25 Xtreme Sandpaper Sheets with extraction holes. These universal sanding sheets are suitable for a wide range of renovation, refurbishment and modernisation jobs. Paints, varnishes, putties and fillers can be worked efficiently. Ideally suited to woodworking. This sandpaper can be used to remove old coats of paint and varnish, level out unevenness and smooth wooden surfaces.
Pack of 25 Flex Power Tools SV-P150 VE25 Xtreme Sandpaper Sheets 80 x 133mm x P 150Suitable for: OSE 2-80 18-EC, OSE 2-80 18-EC C, OSE 2-80 ECSpecifications:Length x Width: 80 x 133mmGrit: P 150
Flex Power Tools 80 x 133 SV VE25 Xtreme Sandpaper Sheets with extraction holes. These universal sanding sheets are suitable for a wide range of renovation, refurbishment and modernisation jobs. Paints, varnishes, putties and fillers can be worked efficiently. Ideally suited to woodworking. This sandpaper can be used to remove old coats of paint and varnish, level out unevenness and smooth wooden surfaces.
Pack of 25 Flex Power Tools SV-P180 VE25 Xtreme Sandpaper Sheet 80 x 133mm x P 180Suitable for: OSE 2-80 18-EC, OSE 2-80 18-EC C, OSE 2-80 ECSpecifications:Length x Width: 80 x 133mmGrit: P 180
Flex Power Tools SV VE25 Xtreme Sandpaper Sheets with extraction holes. These universal sanding sheets are suitable for a wide range of renovation, refurbishment and modernisation jobs. Paints, varnishes, putties and fillers can be worked efficiently. Ideally suited to woodworking. This sandpaper can be used to remove old coats of paint and varnish, level out unevenness and smooth wooden surfaces.
Pack of 25 Flex Power Tools SV-P220 VE25 Xtreme Sandpaper Sheets 100 x 150mm x P 220Suitable for: ODE 2-100 18-EC, ODE 2-100 18-EC C, ODE 2-100 ECSpecifications:Length x Width: 100 x 150mmGrit: P 220
Flex Power Tools 80 x 133 SV VE25 Xtreme Sandpaper Sheets with extraction holes. These universal sanding sheets are suitable for a wide range of renovation, refurbishment and modernisation jobs. Paints, varnishes, putties and fillers can be worked efficiently. Ideally suited to woodworking. This sandpaper can be used to remove old coats of paint and varnish, level out unevenness and smooth wooden surfaces.
Pack of 25 Flex Power Tools SV-P220 VE25 Xtreme Sandpaper Sheets 80 x 133mm x P 220Suitable for: OSE 2-80 18-EC, OSE 2-80 18-EC C, OSE 2-80 ECSpecifications:Length x Width: 80 x 133mmGrit: P 220
Flex Power Tools SV VE25 Xtreme Sandpaper Sheets with extraction holes. These universal sanding sheets are suitable for a wide range of renovation, refurbishment and modernisation jobs. Paints, varnishes, putties and fillers can be worked efficiently. Ideally suited to woodworking. This sandpaper can be used to remove old coats of paint and varnish, level out unevenness and smooth wooden surfaces.
Pack of 25 Flex Power Tools SV-P320 VE25 Xtreme Sandpaper Sheets 100 x 150mm x P 320Suitable for: ODE 2-100 18-EC, ODE 2-100 18-EC C, ODE 2-100 ECSpecifications:Length x Width: 100 x 150mmGrit: P 320
Flex Power Tools SV VE25 Xtreme Sandpaper Sheets with extraction holes. These universal sanding sheets are suitable for a wide range of renovation, refurbishment and modernisation jobs. Paints, varnishes, putties and fillers can be worked efficiently. Ideally suited to woodworking. This sandpaper can be used to remove old coats of paint and varnish, level out unevenness and smooth wooden surfaces.
Pack of 25 Flex Power Tools SV-P40 VE25 Xtreme Sandpaper Sheets 100 x 150mm x P 40Suitable for: ODE 2-100 18-EC, ODE 2-100 18-EC C, ODE 2-100 ECSpecifications:Length x Width: 100 x 150mmGrit: P 40
Flex Power Tools 80 x 133 SV VE25 Xtreme Sandpaper Sheets with extraction holes. These universal sanding sheets are suitable for a wide range of renovation, refurbishment and modernisation jobs. Paints, varnishes, putties and fillers can be worked efficiently. Ideally suited to woodworking. This sandpaper can be used to remove old coats of paint and varnish, level out unevenness and smooth wooden surfaces.
Pack of 25 Flex Power Tools SV-P40 VE25 Xtreme Sandpaper Sheets 80 x 133mm x P 40Suitable for: OSE 2-80 18-EC, OSE 2-80 18-EC C, OSE 2-80 ECSpecifications:Length x Width: 80 x 133mmGrit: P 40
Flex Power Tools SV VE25 Xtreme Sandpaper Sheets with extraction holes. These universal sanding sheets are suitable for a wide range of renovation, refurbishment and modernisation jobs. Paints, varnishes, putties and fillers can be worked efficiently. Ideally suited to woodworking. This sandpaper can be used to remove old coats of paint and varnish, level out unevenness and smooth wooden surfaces.
Pack of 25 Flex Power Tools SV-P60 VE25 Xtreme Sandpaper Sheets 100 x 150mm x P 60Suitable for: ODE 2-100 18-EC, ODE 2-100 18-EC C, ODE 2-100 ECSpecifications:Length x Width: 100 x 150mmGrit: P 60
Flex Power Tools 80 x 133 SV VE25 Xtreme Sandpaper Sheets with extraction holes. These universal sanding sheets are suitable for a wide range of renovation, refurbishment and modernisation jobs. Paints, varnishes, putties and fillers can be worked efficiently. Ideally suited to woodworking. This sandpaper can be used to remove old coats of paint and varnish, level out unevenness and smooth wooden surfaces.
Pack of 25 Flex Power Tools SV-P60 VE25 Xtreme Sandpaper Sheets 80 x 133mm x P 60Suitable for: OSE 2-80 18-EC, OSE 2-80 18-EC C, OSE 2-80 ECSpecifications:Length x Width: 80 x 133mmGrit: P 60
Flex Power Tools SV VE25 Xtreme Sandpaper Sheets with extraction holes. These universal sanding sheets are suitable for a wide range of renovation, refurbishment and modernisation jobs. Paints, varnishes, putties and fillers can be worked efficiently. Ideally suited to woodworking. This sandpaper can be used to remove old coats of paint and varnish, level out unevenness and smooth wooden surfaces.
Pack of 25 Flex Power Tools SV-P80 VE25 Xtreme Sandpaper Sheets 100 x 150mm x P 80Suitable for: ODE 2-100 18-EC, ODE 2-100 18-EC C, ODE 2-100 ECSpecifications:Length x Width: 100 x 150mmGrit: P 80
Flex Power Tools 80 x 133 SV VE25 Xtreme Sandpaper Sheets with extraction holes. These universal sanding sheets are suitable for a wide range of renovation, refurbishment and modernisation jobs. Paints, varnishes, putties and fillers can be worked efficiently. Ideally suited to woodworking. This sandpaper can be used to remove old coats of paint and varnish, level out unevenness and smooth wooden surfaces.
Pack of 25 Flex Power Tools SV-P80 VE25 Xtreme Sandpaper Sheets 80 x 133mm x P 80Suitable for: OSE 2-80 18-EC, OSE 2-80 18-EC C, OSE 2-80 ECSpecifications:Length x Width: 80 x 133mmGrit: P 80
Flex Power Tools TK-L SP SET-1 STACK PACK Carrying Case Kit 1.Tools and accessories can be easily transported to the construction site with the robust STACK PACK storage and transport system. The boxes are made of impact-resistant plastic with aluminium-reinforced corners, protecting tools and accessories from the toughest construction site conditions. The boxes have a durable metal latch, with additional handles ensuring flexible and comfortable handling. Interlocking quick-connect fasteners allow fast, flexible and effortless connection of the individual boxes so the storage system can be assembled according to the user’s specific needs. The standard kit consists of a trolley with removable telescopic handle, with Ø 23cm robust wheels, a large carrying box and a medium box with gas struts, plus a Big Organizer with a transparent lid.Specifications:Protection Class: IP65
Flex Power Tools TKL SP SET 2 STACK PACK Carrying Case Kit 2.Tools and accessories can be easily transported to the construction site with the robust STACK PACK storage and transport system. The boxes are made of impact-resistant plastic with aluminium-reinforced corners, protecting tools and accessories from the toughest construction site conditions. The boxes have a durable metal latch, with additional handles ensuring flexible and comfortable handling. Interlocking quick-connect fasteners allow fast, flexible and effortless connection of the individual boxes so that the storage system can be assembled according to the user’s specific needs.The set consists of a worktop, two drawer boxes, one with 3 drawers and one with 2 drawers, and the trolley. Ideal for storing accessories and small parts. The contents are always perfectly organised and ready to hand.Specifications:Dimensions (W x L x H): 370 x 560 x 980mmLoading Capacity: 65kgProtection Class: IP65
Flex Power Tools TL 4000 18.0/230 Building Site Spotlight with 3 brightness settings, 1000, 2000 and 4000 lumen. The lamp can be turned through 180°. Also, the lamp's three panels feature two axes of rotation for free positioning of the light angle. This allows the light to be focussed in one direction or switched to area illumination.The multifunctional head can be operated as a pure work light directly with an 18V battery. Can be used fixed with a hook or mounted on a tripod. The tripod has a 1/4in connection and can also be used for other devices such as line lasers or cameras, etc. Fast set-up and stability thanks to one-button operation and tripod stand.The multifunction control panel features an LED charge level indicator, activation button, On/Off switch and USB-C charging port. A second On/Off switch allows the light to be conveniently operated above the grip position on the tripod.The building site spotlight can also be supplied with power directly via a commercially available cold appliance connection cable (not included). Suitable for operation with 230V, 110/120V or 18V Flex Li-ion batteries. Comes as a bare unit, NO battery or charger. FLEX battery system: suitable for all FLEX 18 V battery packs. Delivery does not include battery and charger.Specifications:Colour Temperature: 4,000 CCTLuminous Flux: 1,000/2,000/4,000 lmDimensions (WxLxH): 1190 x 295 x 275mmTripod Height Working Range: 1.1-2.2mWeight: 8.2kg (without battery pack)
The Flex Power Tools TW-PT 80 Lambswool Polishing Pad consists of 90% natural wool and 10% polyester. This combination provides for longer service life and greater volume. It removes sanding scratches 30% faster than using a sponge. Ideal for UV paints and the latest generation of scratch-resistant paints. The special PerfectTouch sandwich design and extra orange foam layer give the pad that slight degree of cushioning and much greater stiffness. This allows for a perfect surface contact even in problem areas and an optimal and exact guiding.
The Flex Power Tools VC 2 L MC Hip 18.0-EC Vacuum is compact and lightweight, fitted with a waist belt and carrying harness for portable use. Fits in all vehicles thanks to its compact design. The carrying harness and waist belt can be easily removed at the touch of a button.The brushless motor ensures greater efficiency and a long service life. Its high-performance turbine ensures both a high suction capacity and a high vacuum. Eco mode, extends the battery runtime up to 45 minutes with a max. vacuum of 15,400 Pa, or a runtime of 22 minutes in Boost mode.The flat-fold filter has been optimised cleaning and improved container filling. Use the manual filter cleaning function to remove dust deposited in the filter element. Its 32mm diameter compact hose has a length of 0.5m, can be extended up to 2.5m. The hand tube holder ensures tidiness during transport. Ideal for professional use in final assembly, automotive cleaning, etc.Comes as a bare unit, NO battery or charger. FLEX battery system: suitable for all FLEX 18 V battery packs. Delivery does not include battery and charger.Supplied with: 1 x Fleece Filter Bag (530573), 1 x Suction Hose with Auxiliary Air Control (487295) and 1 x Carrying Harness for VC 2 Hip (530572).Specifications:Battery Voltage: 18VVacuum Cleaner Flow Rate: 1,200 l/minMax. Vacuum 20,400 PaFilter Surface Area: 1,250 cm²Tank Volume: 1.5 LitreHose Length: 2.5mDimensions (W x L x H): 340 x 135 x 290mmWeight: 2.0kg (without battery pack)
The Flex Power Tools VC 6 L MC 18.0 Compact Vacuum Cleaner has a high-performance turbine that ensures an excellent extraction result. Eco mode, extends the battery runtime up to 30 minutes. Its flat-fold filter can be cleaned manually for optimised cleaning and improved container filling. The compact, lightweight design incorporates a carry strap for mobile use. The compact design also means it fits in all vehicles. Accessories can be stowed onboard thanks to integrated brackets on the suction head. Supplied with a Ø32mm compact hose with a length of 0.5m that can be extended to 2.5m. Optimised for cleaning work in offices, storage rooms, workshops and vehicles. It can also be used in final assembly, automotive cleaning etc. FLEX power tools can be connected with ease using the FLEX clip system for extraction work. Supplied as a Bare Unit - No Battery or Charger. Supplied with the following accessories: 1 x Suction Hose Ø32mm x 0.5-2.5m1 x Class L Flat-Fold Filter1 x Class L Fleece Filter Bag1 x Hand Pipe1 x Crevice Nozzle1 x Round Brush1 x Upholstery Nozzle1 x Shoulder Strap Specification: Max. Volume Flow: 1,400 L/min.Max. Vacuum: 12,000 PaContainer Volume: 6 litreFilter Surface: 3,000cm²Size (W x L x H): 240 x 200 x 400mmWeight: 3.3kg (inc. accessories, without battery)
The Flex Power Tools VCE 22 L MC 2x18.0 Safety Vacuum Cleaner is powered by 2 x 18V battery packs (NOT supplied). A self-closing battery compartment, protects the batteries from dirt and moisture. Class L safety vacuum cleaner, suitable for all dust with OEL value >1 mg/m³.The high-performance turbine ensures both a high suction capacity and a high vacuum. Air flow and running time are optimised for use with the 'Giraffe', i.e. the air flow does not drop below 1400 litres of air per minute and ensures dust-free work. Soft start stops any voltage peaks at the start and the run-on feature (5 sec. overrun) empties any remaining dust in the vacuum hose.Use the manual filter cleaning function to remove dust deposited in the filter element. This handy and compact vacuum cleaner is easy to use and transport. Equipped with large wheels and two swivel guide rollers.Comes as a bare unit, NO battery or charger. FLEX battery system: suitable for all FLEX 18 V battery packs. Delivery does not include battery and charger.Supplied with: 1 x Suction Hose with Auxiliary Air Control (445037) and 1 x Adaptor (445029).Specifications:Battery Voltage: 18VVacuum Cleaner Flow Rate: 2,300 l/minMax. Vacuum: 15,200 PaFilter Surface Area: 3,000cm²Tank Volume: 21 LitreHose Length: 4mDimensions (W x L x H): 375 x 392 x 530mmWeight: 7.2kg (without battery pack)
The Flex Power Tools VCE 22 M MC 2x18.0 Safety Vacuum Cleaner is powered by 2 x 18V battery packs (NOT supplied). A self-closing battery compartment, protects the batteries from dirt and moisture. Class M safety vacuum cleaner, suitable for all dusts with OEL values ≥ 0.1 mg/m³. Specifically for mineral and timber dusts (also beech and oak).The high-performance turbine ensures both a high suction capacity and a high vacuum. Air flow and running time are optimised for use with the 'Giraffe', i.e. the air flow does not drop below 1400 litres of air per minute and ensures dust-free work. Soft start stops any voltage peaks at the start and the run-on feature (5 sec. overrun) empties any remaining dust in the vacuum hose.Use the manual filter cleaning function to remove dust deposited in the filter element. The suction diameter selector switch (32mm or 21mm) adjusts the flow rate to the corresponding task. This handy and compact vacuum cleaner is easy to use and transport. Equipped with large wheels and two swivel guide rollers.Comes as a bare unit, NO battery or charger. FLEX battery system: suitable for all FLEX 18 V battery packs. Delivery does not include battery and charger.Supplied with: 1 x Suction Hose with Auxiliary Air Control (445037) and 1 x Adaptor (445029).Specifications:Battery Voltage: 18VVacuum Cleaner Flow Rate: 2,300 l/minMax. Vacuum: 15,200 PaFilter Surface Area: 3,000cm²Tank Volume: 21 LitreHose Length: 4mDimensions (W x L x H): 375 x 392 x 530mmWeight: 7.2kg (without battery pack)
Flex Power Tools VCE 22 MC Vacuum Cleaner has a handy and compact design making it easy to use and transport. The high performance turbine ensures both a high suction capacity and a high vacuum, giving an excellent extraction result. By using manual filter cleaning, the dust deposited in the filter element is quickly removed with a targeted blast of air.Levels are monitored to prevent malfunctions when drawing in liquids, thanks to the installed float valve. The soft start feature stops any voltage peaks at the start and the run-on feature (5 Sec. Overrun) empties any remaining dust in the hose. It can also be used as a dust extraction unit thanks to its appliance socket and electronic automatic on/off system.Other features include: large wheels with two swivel guide rollers, a blowing function, suction control that varies depending on the attached power tool, accessory storage on the back of the vacuum and a filter bag made from tear-proof fleece for optimum filling.Class M safety vacuum cleaner, suitable for all dusts with OEL values ≥ 0.1 mg/m³. Specifically for mineral and timber dusts (also beech and oak).Supplied with: 1 x Antistatic Suction Hose and 1 x Fleece Filter Bag.Specifications:Input Power: 1,200WPower Take Off: 100-2,400WTank Capacity: 20 litresMax Air Flow: 3,700l/min.Max. Vacuum: 24,500 PaHose Length: 3.5mSize (W x L x H): 377 x 387 x 506mmCable Length: 7.5mWeight: 9.5kg
The Flex Power Tools VCE 26 L MC Safety Vacuum Cleaner is fitted with a manual filter cleaning system that has a handy and compact design making it easy to use and transport. The high performance turbine ensures both a high suction capacity and a high vacuum, giving an excellent extraction result. By using manual filter cleaning, the dust deposited in the filter element is quickly removed with a targeted blast of air. Levels are monitored to prevent malfunctions when drawing in liquids, thanks to the installed float valve. The soft start feature stops any voltage peaks at the start and the run-on feature (5 Sec. Overrun) empties any remaining dust in the hose. It can also be used as a dust extraction unit thanks to its appliance socket and electronic automatic on/off system. Other features include: large wheels with two swivel guide rollers, a blowing function, suction control that varies depending on the attached power tool, accessory storage on the back of the vacuum and a filter bag made from tear-proof fleece for optimum filling. Supplied with: 1 x Suction Hose 32mm x 3.5m with Elbow, 1 x Filter Element Class L/M, 2 x 0.5m Aluminium Suction Tubes, 1 x Combination Floor Nozzle, 1 x Round Brush, 1 x Crevice Nozzle, 1 x Upholstery Nozzle, 1 x Filter Bag, 1 x PR Waste Disposal Bag, 1 x Suction Pipe Holder, 1 x Cable Hook, 1 x Flexible Hose Strap for Hose Holder, 1 x Rubber Tool Brush and 1 x Box for Accessories Holder. Safety vacuum cleaner, approved for dust class L, suitable for all dust with OEL value >1 mg/m³. Specification Input Power: 1,250 Watt.Power Take Off: 100-2,600 Watt.Capacity: Wet: 16 Litres, Dry: 25 Litres.Max Air Flow: 3,600l/min.Max. Vacuum: 21,000 Pa.Filter Surface: 3,000cm².Size (W x L x H): 397 x 377 x 533mm. Weight: 8.4kg.The Flex Power Tools VCE 26 L MC Safety Vacuum Cleaner 110 Volt Version.
The Flex Power Tools VCE 26 L MC Safety Vacuum Cleaner has a handy and compact design making it easy to use and transport. The high performance turbine ensures both a high suction capacity and a high vacuum, giving an excellent extraction result. By using manual filter cleaning, the dust deposited in the filter element is quickly removed with a targeted blast of air.Levels are monitored to prevent malfunctions when drawing in liquids, thanks to the installed float valve. The soft start feature stops any voltage peaks at the start and the run-on feature (5 Sec. Overrun) empties any remaining dust in the hose. It can also be used as a dust extraction unit thanks to its appliance socket and electronic automatic on/off system.Other features include: large wheels with two swivel guide rollers, a blowing function, suction control that varies depending on the attached power tool, accessory storage on the back of the vacuum and a filter bag made from tear-proof fleece for optimum filling.Supplied with: 1 x Suction Hose 32mm x 3.5m with Elbow, 1 x Filter Element Class L/M, 2 x 0.5m Aluminium Suction Tubes, 1 x Combination Floor Nozzle, 1 x Round Brush, 1 x Crevice Nozzle, 1 x Upholstery Nozzle, 1 x Filter Bag, 1 x PR Waste Disposal Bag, 1 x Suction Pipe Holder, 1 x Cable Hook, 1 x Flexible Hose Strap for Hose Holder, 1 x Rubber Tool Brush and 1 x Box for Accessories Holder.Safety vacuum cleaner, approved for dust class L, suitable for all dust with OEL value >1 mg/m³.Specifications:Input Power: 1,000WPower Take Off: 100-2,600WCapacity: Wet: 16 Litres, Dry: 25 LitresMax Air Flow: 3,600l/min.Max. Vacuum: 21,000 PaFilter Surface: 3,000cm²Size (W x L x H): 397 x 377 x 533mmWeight: 8.4kg
1 x Flex Power Tools VCE 26 L MC Safety Vacuum Cleaner 1250W 240V.
The Flex Power Tools VCE 33 M AC Vacuum Cleaner is fitted with a high-performance turbine that ensures both a high suction capacity and a high vacuum rate. Continuous automatic flat filter cleaning ensures no loss of suction. The flat-fold filter has a Teflon coating/nanocoating that allows optimum use of the tank volume. Flow sensor technology monitors the flow rate and emits a visual and audible signal to indicate any drop below the statutory minimum value of ≤ 20m/s. It is also suitable for wet vacuuming and fitted with electronic liquid level control to prevent over filling. There is a separate motor air cooling duct fitted with coarse dirt filter that protects the turbine against the ingress of ambient air and thereby extends the service life. Soft start stops any voltage peaks at the start and the run-on feature (15 sec. overrun) empties any remaining dust in the vacuum hose. The suction diameter selector switch adjusts the flow rate to the corresponding task. It is simple and easy to change the filter, as there is no need to remove the suction head. The vacuum is fitted with a permanent power take off socket and an electronic automatic on/off switch. It has a double-walled, sturdy container with integrated grip recess for easy emptying. It has a dust-protected, antistatic finish that prevents electric charging of the suction hose. Equipped with large wheels and 2 swivel guide rollers made of metal. Class M safety vacuum cleaner, suitable for all dusts with OEL values ≥ 0.1mg/m³. Specifically for mineral and timber dusts (also beech and oak). Recommendation: When working with a filter bag turn off the automatic cleaning system. When using a disposable bag leave the system on. Supplied with: 1 x Antistatic Suction hose Ø32mm x 4m with Clip Connection, Auxiliary Air Control and Suction Adaptor, 1 x Antistatic Adaptor Ø25-32mm, 1 x PP Waste Disposal Bag, 1 x 445.118 PES L/M/H Flat-Fold Filter, 1 x 445.088 Class L/M Fleece Filter Bag, 2 x Hose Clips and 1 x L-BOXX® Holder. Specification: Input Power: 1400WMax. Volume Flow: 4500L/min.Max. Vacuum: 25000PaFilter Surface: 5000cm²Container Volume: Dry 30 Litre, Wet 17 LitrePower Take Off: 100-2400WSize (WxLxH): 565 x 385 x 565mmCable Length: 7.5mWeight: 15.2kg1 x Flex Power Tools VCE 33 M AC Vacuum Cleaner M Class 110 volt.
The Flex Power Tools VLP 18.0 C Grabo Vacuum Lifter lifts and moves almost any object and puts it effortlessly into place. This vacuum lifter is ideal for various materials such as tiles, drywall panels, concrete blocks, glass, metals, furniture and large electrical appliances. Its powerful functionality ensures heavy objects are handled both efficiently and reliably.The vacuum lifter has a holding force of up to 170kg depending on the ambient conditions, and it sucks on almost any surface, even dusty, rough or semi-porous materials. The permissible load-bearing capacity is 130kg. Its powerful vacuum pump stops automatically at maximum vacuum.Work safety has the highest priority. The vacuum lifter has an automatic suction function and the digital display continuously provides information about the current negative pressure. The electronic management system (EMS) protects the machine, extends the service life, and increases efficiency.Comes as a bare unit, NO battery or charger. FLEX battery system: suitable for all FLEX 18 V battery packs. Delivery does not include battery and charger.Specifications:Rated Air Flow: 20 l/min.Max. Vacuum 0.8 barAllowed Lifting Capacity 130kgMax. Holding Force: 170kgWorking Temperature: 0°~60°Dimensions (W x L x H): 300 x 184 x 121mmWeight: 1.48kg (without battery pack)
The Flex Power Tools WL 1000 18.0 Hand Torch comes with 8 LEDs and 3 brightness levels. The LED lamp head can be swivelled through 180° + 270° degrees. This allows optimum illumination of the working space at all times. Powerful integrated magnets provide a firm and flexible hold.Comes as a bare unit, NO battery or charger. FLEX battery system: suitable for all FLEX 18 V battery packs. Delivery does not include battery and charger.Specifications:Luminous Flux: 200/500/1,000 lmColour Temperature: 4000 CCTDimensions (WxLxH): 150 x 80 x 210mmWeight: 0.6kg (without battery pack)
This Flex Power Tools WL 2800 18.0 Hand Torch comes with 2 brightness levels, 2800 lumens with a range of 630m and 1000 lumens, plus an additional red LED for reduced scattering and dazzling effect. The LED lamp head can be swivelled through 180° degrees. This allows almost every corner and every angle to be optimally illuminated. The ergonomic grip features soft grip areas for increased comfort. It also features a 1/4in connection thread for tripods and a swivelling, lowerable hook for attaching the lamp and belt clip.Can also be operated via 12V on-board voltage (via cigarette adapter, car socket).Comes as a bare unit, NO battery or charger. FLEX battery system: suitable for all FLEX 18 V battery packs. Delivery does not include battery and charger.Specifications:Luminous Flux: 1000/2800 lmWeight: 1.0kg (without battery pack)
The Flex Power Tools WL 300 18.0 Hand Torch comes with 2 brightness levels, 300 lumen and 150 lumen. The LED lamp head can be swivelled through 104° degrees. This allows optimum illumination of the working space at all times. Its ergonomic grip features soft grip areas.Comes as a bare unit, NO battery or charger. FLEX battery system: suitable for all FLEX 18 V battery packs. Delivery does not include battery and charger.Specifications:Luminous Flux: 150/300 lmDimensions (WxLxH): 125 x 75 x 205mmWeight: 0.4kg (without battery pack)
The Flex Power Tools WL LED 18.0 LED Work Light features 24 cold white LEDs and integrated discharge protection. The head can be swivelled through 320° and folded through 180°. Fitted with a swivelling hook for attaching the lamp to a rafter or belt clip. Bare Unit, No Battery or Charger Supplied. Lighting Duration: 2.5Ah approx. 20 hours; 5.0Ah approx. 40 hours
The Flex X713 Flex Random Orbit Sander is a compact, handy and lightweight machine with a quiet-running motor. It has an ergonomically designed, non-slip, soft-grip handle for safe and comfortable working. The hook and loop backing pad allows easy abrasive attachment. The sander has a dust-proof on/off switch and integrated dust extraction with a dust filter bag. It can be connected to an external dust extractor using the supplied adaptor. Supplied with: 1 x 125mm Hook & Loop Sand Paper (8 Perforations), 1 x Dust Bag and 1 x Adaptor for Dust Extractor. Specification Input Power: 230WOscillating Speed: 12,000/min.Oscillating Diameter: 1.6mmBase Plate: 125mmWeight: 1.3kg
The Flex Power Tools XFE 15 150 18.0-EC Orbital Polisher has a brushless motor for greater efficiency and longer service life. Its continuous speed control trigger provides a gentle start and features a lock-on function for continuous operation. The flat gear head reduces distance to the surface and can be operated safely in any position. It has a very low heat generation on surfaces making it ideal for use on temperature-sensitive paints. The ergonomically shaped grip hood features a soft grip area for increased control and comfort. Fitted with a counterweight for smoother operation. The integrated electronic management system (EMS) protects the machine, extends the service life and increases efficiency. Bare Unit, No Battery or Charger Supplied Specification: Oscillating Speed: 2,300-3,800/min.Orbit: 15mmMax. Polishing Pad Diameter: 160mmMax. Back-Up Pad Diameter: 150mmDimensions: 370 x 140mmWeight: 2.1kg
Quality GRIP® fastening abrasive disc. Ideal for intricate sanding applications. Made in Great Britain25 mm P120 to suit Flexipads spindle parts FLE48105 (Hard face) FLE48205 (Soft face).Excellent for woodworking. Type: GRIP® fasteningSize: 50 mmGrade: P120
Quality GRIP® fastening abrasive disc. Ideal for intricate sanding applications. Made in Great Britain50 mm P120 to suit Flexipads spindle parts FLE48110 (Hard face) FLE48210 (Soft face).Excellent for woodworking. Type: GRIP® FasteningSize: 50 mmGrade: P240
