The Flex Power Tools LBP 125-15 18-EC C Grinder has a brushless motor with greater efficiency and longer service life. Its on/off switch features a dead-man function for added safety. A removable, protective metal grille provides dust protection. With microprocessor control; soft start, restart protection after a power failure, temperature monitoring, overload protection and CDC-electronic feedback control.Fitted with an extremely streamlined handle section with soft grip inlays for perfect handling. It also offers more ergonomic handling due to the inclined side handle. An electronic brake stops the tool in 3 seconds, and an anti-kickback feature increases user safety. The electronic management system (EMS) protects the machine, extends the service life and increases efficiency. Other features include tool-free adjustment of safety guard and spindle lock.Comes as a bare unit, NO battery or charger. FLEX battery system: suitable for all FLEX 18 V battery packs. Delivery does not include battery and charger.Specifications:No Load Speed: 10,000/min.Max. Disc Diameter: 125mmSpindle: M14Weight: 1.9kg (without battery pack)
The Flex Power Tools LE 12-3 100 WET Polisher has a powerful motor with microprocessor electronics: tachogenerator constant speed control, soft start, overload protection and speed selection. Produces a high torque for maximum material removal and optimum surface quality.It powder-coated, varnished magnetic pad increases service life, thanks to the additional protection against wear and abrasive dust. The bail handle provides a secure grip, even when working on vertical surfaces.The water feed and control system is located below the housing, which makes operation and precise dosing easy. An unobstructed grip area is provided directly above the backing pad. Fitted with a 2m special hose. No additional hose safety devices required. Increases flexibility, reduces weight and prevents risk of injury from hose clips. The hose also features a quick-fit 1/2in brass coupling.Fitted with a contour plug. This can be connected only to an isolating transformer. For safety reasons, operation is permitted only connected to the FLEX TT 2000 isolating transformer.Specifications:Input Power: 1,150WNo Load Speed: 1,200 - 3,700/min.Max. Polishing Disc 115mmHose Length: 2mCable Length: 5mWeight: 2.4kg
Flex Power Tools LKE 152 18-EC C-Set TrinoxFlex Fillet Weld Sander for precision work on surfaces, sanding work in particularly tight angles, corners and hard-to-reach places. It has a brushless motor with greater efficiency and a longer service life. With microprocessor controls, speed selection, tachogenerator constant speed control, for total control. An electronic management system (EMS) protects the machine, extends the service life, and increases efficiency. Safety is provided via soft start, restart protection after power failure, overload protection and temperature monitoring.This machine is part of the TrinoxFlex range which is a modular system allowing you to change the purpose of the machine using the different modules available. Its unique tool attachment system features quick coupling for tool-free change of system attachments. Attachments sold separately. Comes as a bare unit, NO battery or charger. FLEX battery system: suitable for all FLEX 18 V battery packs. Delivery does not include battery and charger.Specifications:No Load Speed: 2,125/2,990/3,850/4,700/min.Max. Disc Diameter: 152mmWeight: 2.9kg (without battery pack)
The Flex Power Tools M-DW 55 Screw Magazine Attachment fits the DW 45 18.0-EC Drywall Screwdriver and will accept standard, belted screws. The screw magazine can rotate 360°, making it easy to reach into corners. There is also a tool-free, screwing depth wheel and tool-free, adjustable depth stop, allowing it to adapt to different screw lengths. Ergonomic soft grip handle for comfortable use. Specification: Max. Screw Length: 25-55mmMax. Shank Diameter: 4.2mm
Flex Power Tools Medium Polishing Pads. Ideally suited for moderately-scratched paintwork, traces of use and for refreshing the colour of used paintwork with subsequent sealing in just one step when combined with the violet polish. The special reticulation makes them highly tear-resistant and durable.
Pack of 2 Flex Power Tools Medium Polishing Pads 125mmSuitable for: PE 14-2 150 230/BS, PE 150 18.0-EC/5.0 P-Set, PE 150 18.0-EC/5.0 Set, XCE 8 125 18.0-EC/5.0 P-Set, XCE 8 125 18.0-EC/5.0 Set, XCE 8 150 18-EC C, XCE 10-8 125 230/BS, XFE 7-15 150 BS, XFE 15 150 18.0-EC/5.0 P-Set, XFE 15 150 18.0-EC/5.0 Set.Specifications:Diameter: 125mmHeight: 20mm
Flex Power Tools Medium Polishing Pads. Ideally suited for moderately-scratched paintwork, traces of use and for refreshing the colour of used paintwork with subsequent sealing in just one step when combined with the violet polish. The special reticulation makes them highly tear-resistant and durable.
Pack of 5 Flex Power Tools Medium Polishing Pads 125mmSuitable for: PE 14-2 150 230/BS, PE 150 18.0-EC/5.0 P-Set, PE 150 18.0-EC/5.0 Set, XCE 8 125 18.0-EC/5.0 P-Set, XCE 8 125 18.0-EC/5.0 Set, XCE 10-8 125 230/BS, XFE 7-15 150 BS, XFE 15 150 18.0-EC/5.0 P-Set, XFE 15 150 18.0-EC/5.0 Set.Specifications:Diameter: 125mmHeight: 20mm
Flex Power Tools Medium Polishing Pads. Ideally suited for moderately-scratched paintwork, traces of use and for refreshing the colour of used paintwork with subsequent sealing in just one step when combined with the violet polish. The special reticulation makes them highly tear-resistant and durable.
Pack of 2 Flex Power Tools Medium Polishing Pads 150mmSuitable for: PE 14-2 150 230/BS, PE 150 18.0-EC/5.0 P-Set, PE 150 18.0-EC/5.0 Set, XCE 8 125 18.0-EC/5.0 P-Set, XCE 8 125 18.0-EC/5.0 Set, XCE 8 150 18-EC C, XCE 10-8 125 230/BS, XFE 7-15 150 BS, XFE 15 150 18.0-EC/5.0 P-Set, XFE 15 150 18.0-EC/5.0 Set.Specifications:Diameter: 150mmHeight: 20mm
Flex Power Tools Medium Polishing Pads. Ideally suited for moderately-scratched paintwork, traces of use and for refreshing the colour of used paintwork with subsequent sealing in just one step when combined with the violet polish. The special reticulation makes them highly tear-resistant and durable.
Pack of 5 Flex Power Tools Medium Polishing Pads 25mmSuitable for: PE 8-4 80 230/BS, PXE 80 10.8-EC/2.5 P-Set, PXE 80 10.8-EC/2.5 Set, PXE 80 10.8-EC/2.5 Set UK, PXE 80 12-EC.Specifications:Diameter: 25mmHeight: 20mm
Flex Power Tools Medium Polishing Pads. Ideally suited for moderately-scratched paintwork, traces of use and for refreshing the colour of used paintwork with subsequent sealing in just one step when combined with the violet polish. The special reticulation makes them highly tear-resistant and durable.
Pack of 5 Flex Power Tools Medium Polishing Pads 50mmSuitable for: PE 8-4 80 230/BS, PXE 80 10.8-EC/2.5 P-Set, PXE 80 10.8-EC/2.5 Set, PXE 80 10.8-EC/2.5 Set UK, PXE 80 12-EC.Specifications:Diameter: 50mmHeight: 20mm
Flex Power Tools Medium Polishing Pads. Ideally suited for moderately-scratched paintwork, traces of use and for refreshing the colour of used paintwork with subsequent sealing in just one step when combined with the violet polish. The special reticulation makes them highly tear-resistant and durable.
Pack of 2 Flex Power Tools Medium Polishing Pads 75mmSuitable for: PE 8-4 80 230/BS, PE 14-2 150 230/BS, PE 150 18.0-EC/5.0 P-Set, PE 150 18.0-EC/5.0 Set, PXE 80 10.8-EC/2.5 P-Set, PXE 80 10.8-EC/2.5 Set, PXE 80 10.8-EC/2.5 Set UK, PXE 80 12-EC, XFE 7-12 80 230/BS.Specifications:Diameter: 75mmHeight: 20mm
The Flex MH-O D225 Round Sanding Head is suitable for finishing large surfaces on walls and ceilings. It offers effective dust extraction and a high surface removal rate. Compatible with the following Flex models: GE 7 & MH-O, GE MH 18.0-EC, GCE 6-EC, GCE 6-EC Kit and GCE 6-EC Kit MH-R.
The Flex Power Tools MH-R Rotary Sanding Head with Edge Segment can be used to sand walls and ceilings. The rotation of the sanding head edge is induced by the movement of the tool, without interruption of the sanding process. This results in a 5 times faster edge processing. Integrated sliding edges on the sanding head prevent damage to the contact surfaces on the wall and ceiling. Compatible with the GE 7 Giraffe® Sander. Specification: Diameter: 225mm
The Flex Power Tools MH-T Triangular Sanding Head utilises an orbital movement that guides the abrasive right up to the edge, perfect for sanding corners. Its large contact surface enables a more even finish when compared with hand-held eccentric sanders. The rotation of the triangular sanding head adapts to tool movement, which allows sanding of the wall and ceiling transitions without interruption of the operation. It comes with changeable protective corners with sliding strips. Compatible with the GE 7 Giraffe® Sander. Specification: Oscillating Diameter: 4mm
The Flex Power Tools MH-X D225 Excentric Sanding Head uses multi-hole perforation sandpaper for optimum dust extraction and more comfortable working conditions. This innovative excentric sanding head effortlessly achieves perfect surfaces. It efficiently grinds fast putties, spray fillers, and also softer putties and fillers in a controlled manner. Compatible with the GE 7 Giraffe® Sander. Specification: Diameter: 225mmOscillating Diameter: 4mm
The Flex MS 713 Palm Sander has a quiet-running motor with an aluminium sanding support plate and a dust-proof on/off switch for increased durability. Its compact, handy, lightweight design features an ergonomically designed, non-slip, soft grip handle for safe, comfortable working. The sanding paper can be attached by hook and loop fastening or via clamps. With an integrated dust extraction system that uses a dust bag. Connection to external dust extractor is also possible using the supplied adapter. The machine is highly versatile and can be used for a number of applications. Supplied with: 1 x Paper Punch, 1 x Dust Bag and 1 x Adaptor for Dust Extraction. Specification Input Power: 220WOscillating Speed: 14,000/min.Oscillating Diameter: 1.6mmBase Plate: 105 x 115mmCable Length: 4mWeight: 1.2kg
The Flex MS-1706 wall chaser has FR electronic control with constant speed control by means of a tachogenerator. It features soft start, overload protection and temperature monitoring. The wall chaser has a patented swivel-mounted motor (EP1693169) which allows for push and pull cutting. It has optimal dust extraction and maximum safety due to the enclosed guard. It allows blades to be changed tool-free and has slit width adjustment. The MS1706 also has a rotating adaptor for dust extractor, tool-free cutting depth adjustment and plunge cut stop. It chases two parallel slots up to 35 mm deep and 30 mm wide and the slot breaker allows for easy removal of the remaining material without a hammer. Specification Input Power: 1,400 Watt.No Load Speed: 7,500/min.Cutting depth: 0-35mm.Groove width: 10-30mm.Disc: 140mm M14 Spindle.Weight: 4.6kg.Flex Power Tools MS-1706 140mm Wall Chaser 110 Volt Version.
The Flex MS-1706 wall chaser has FR electronic control with constant speed control by means of a tachogenerator. It features soft start, overload protection and temperature monitoring. The wall chaser has a patented swivel-mounted motor (EP1693169) which allows for push and pull cutting. It has optimal dust extraction and maximum safety due to the enclosed guard. It allows blades to be changed tool-free and has slit width adjustment. The MS1706 also has a rotating adaptor for dust extractor, tool-free cutting depth adjustment and plunge cut stop. It chases two parallel slots up to 35 mm deep and 30 mm wide and the slot breaker allows for easy removal of the remaining material without a hammer. Specification Input Power: 1,400 Watt.No Load Speed: 7,500/min.Cutting depth: 0-35mm.Groove width: 10-30mm.Disc: 140mm M14 Spindle.Weight: 4.6kg.Flex Power Tools MS-1706 140mm Wall Chaser 240 Volt Version.
Flex Power Tools MT 18.0-EC C Multi Tool with StarlockMAX tool holder and compatible clamping mechanism for all Starlock accessory parts. Its brushless motor provides greater efficiency and a longer service life. The gear unit has a large oscillation angle of 2° on both sides, thus supporting fast sawing, cutting, sanding and scraping-off. Tool-free accessory change makes it easy to switch between tasks.The electronic management system (EMS) protects the machine, extends the service life, and increases efficiency. Anti-vibration damping elements allow for fatigue-free and pleasant working thanks to minimal vibrations. It also features an integrated double LED lamp with afterglow function.The multitool can be used for a wide range of applications such as sawing, cutting, cutting out wood, metal, plastic and plasterboard. Remove old tile grout and adhesive, scrape off silicone grout, paint and carpet adhesive, sand profiles and in corners.Comes as a Bare Unit, NO battery or charger. Suitable for all FLEX 18 V battery packs. Delivery does not include battery and charger.Specifications:No Load Speed: 10,000 - 20,000/min.Oscillation Angle: 2°Weight: 1.3kg (without battery pack)
The Flex Power Tools MXE 18.0-EC Cordless Mixer has a brushless motor with greater efficiency and longer service life. With an electronic management system (EMS) that protects the machine, extends the service life and increases efficiency. The large, rugged 2-gear unit features optimum ratios for powerful torque and speeds for mixing different materials. Fitted with a 3-level (cleaning, stirring up and mixing) switch that can be reached from the grip position without interrupting work. There is also a rotary switch to set the optimum mixing speed: speed 1 for highly viscous materials, speed 2 for medium and low viscosity materials, and an accelerator switch for a slow and gentle start. The flexible rubber sleeve over the on/off switch prevents the ingress of dirt. No malfunctions caused by jammed switches. Ergonomic handles for fatigue-free arm posture and upright body posture allow for comfortable operation. Four corner guards with rubber buffers provide secure storage during transportation and offer protection against shocks and impacts at the building site. The protective cap above the motor housing helps guide the cooling air flow and prevents water ingress. Patented spindle lock with start-up protection for tool-less exchange of the mixing paddle. Suitable for mixing applications up to 30kg MXE 18.0-EC/5.0 Set: 2 x 18V 5.0Ah Li-ion BatteriesMXE 18.0-EC: Bare Unit, No Battery or Charger Specification: No load Speed: 1st Gear: 0-210/325/530/min., 2nd Gear: 0-320/490/780/min.Tool Fixture: M14Clamping Collar: 53mmMax. Mixing Paddle Diameter: 120mmWeight: 4.1kgThe Flex Power Tools MXE 18.0-EC Cordless Mixer Bare Unit, no battery or charger supplied.
The Flex Power Tools MXE 18.0-EC WR2 120 2-Speed Mixer has a brushless motor with greater efficiency and longer service life. With an electronic management system (EMS) that protects the machine, extends the service life and increases efficiency. The large, rugged 2-gear unit features optimum ratios for powerful torque and speeds for mixing different materials. Fitted with a 3-level (cleaning, stirring up and mixing) switch that can be reached from the grip position without interrupting work. There is also a rotary switch to set the optimum mixing speed: speed 1 for highly viscous materials, speed 2 for medium and low viscosity materials, and an accelerator switch for a slow and gentle start. The flexible rubber sleeve over the on/off switch prevents the ingress of dirt. No malfunctions caused by jammed switches. Ergonomic handles for fatigue-free arm posture and upright body posture allow for comfortable operation. Four corner guards with rubber buffers provide secure storage during transportation and offer protection against shocks and impacts at the building site. The protective cap above the motor housing helps guide the cooling airflow and prevents water ingress. Patented spindle lock with start-up protection for tool-less exchange of the mixing paddle. Suitable for mixing applications up to 30kg. Supplied with a WR2 mixing paddle. Supplied as a Bare Unit - No Battery or Charger. Specification: No Load Speed: 1st Gear: 0-210/325/530/min., 2nd Gear: 0-320/490/780/min.Tool Fixture: M14Clamping Collar: 53mmMax. Mixing Paddle Diameter: 120mmWeight: 4.1kg
The Flex Power Tools ODE 2-100 18-EC C Compact Delta Sander has a brushless motor with greater efficiency and longer service life. With microprocessor control; speed preselection with 4 settings, constant speed control by means of tachogenerator and soft start, restart protection. The sanding speed can be adjusted to the task at hand thanks to electronic speed adjustment.Lightweight, compact one-handed design with low vibration. Ideal for fatigue-free and joint-friendly work. Especially suitable for overhead work. The E-signal switch provides simple, safe operation with quick-stop function prevents trailing of the backing pad. Equipped with disc brake, as a result no unwanted sanding marks are produced on the workpiece and expensive corrective finishing is not required.The hook & loop backing pad has a 10-hole system for optimum extraction, suitable for all standard abrasives. It also features an external dust extraction Ø 27mm, antistatic suction hose SH 27x3,5m AS (445.045) can be connected.Comes as a bare unit, NO battery or charger. FLEX battery system: suitable for all FLEX 18 V battery packs. Delivery does not include battery and charger.Specifications:No Load Speed: 6,000 - 10,000/min.No Load Orbital Stroke Rate: 12,000 - 20,000/opm.Backing Pad (W x L): 100 x 150mmDust Extraction Connection: Ø 27mmWeight: 1.0kg (without battery pack)
The Flex Power Tools ODE 2-100 EC Compact Delta Sander has a brushless motor with greater efficiency and longer service life. With microprocessor control; speed preselection with 4 settings, constant speed control by means of tachogenerator and soft start, restart protection. The sanding speed can be adjusted to the task at hand thanks to electronic speed adjustment.Lightweight, compact one-handed design with low vibration. Ideal for fatigue-free and joint-friendly work. Especially suitable for overhead work. The E-signal switch provides simple, safe operation with quick-stop function prevents trailing of the backing pad. Equipped with disc brake, as a result no unwanted sanding marks are produced on the workpiece and expensive corrective finishing is not required.The hook & loop backing pad has a 10-hole system for optimum extraction, suitable for all standard abrasives. It provides effective dust extraction thanks to integrated extractor for dust-free working with filter cartridge. The impact-resistant filter cartridge features an exchangeable PES filter that allows simple dust disposal or cleaning of the filter as well as maximum service life. There is also an external dust extraction Ø 27mm, antistatic suction hose SH 27x3,5m AS (445.045) can be connected.Specifications:Input Power: 260WNo Load Speed: 8,000 - 12,000/min.No Load Orbital Stroke Rate: 16,000 - 24,000/opm.Stroke: 2mmBacking Pad (W x L): 100 x 150mmCable Length: 4.0mDust Extraction Connection: Ø 27mmWeight: 1.2kg
The Flex Power Tools ORE 2-125 18-EC C Random Orbit Sander has a brushless motor with greater efficiency and longer service life. With speed preselection (4 settings). The sanding speed can be adjusted to the taskat hand thanks to electronic speed adjustment. The electronic management system (EMS) protects the machine, extends the service life, and increases efficiency.Lightweight, compact one-handed design with low vibration. Ideal for fatigue-free and joint-friendly work. Its ergonomically designed, handy grip cover with soft grip insert ensures a secure grip and good guidance. The E-signal switch provides simple, safe operation with quick-stop function prevents trailing of the backing pad.The hook & loop backing pad with multi-hose system provides optimum extraction, suited to all standard 125mm diameter abrasives. Integrated dust extraction with dust filter bag keeps the work area clean and tidy. It also features an external dust extraction Ø 27mm, antistatic suction hose SH 27x3,5m AS (445.045) can be connected.Comes as a bare unit, NO battery or charger. FLEX battery system: suitable for all FLEX 18 V battery packs. Delivery does not include battery and charger.Specifications:No Load Speed: 6,000 - 10,000/min.No Load Orbital Stroke Rate: 12,000 - 20,000/opm.Backing Pad Ø: 125mmStroke: 2mmDust Extraction Connection: Ø 27mmWeight: 1.0kg (without battery pack)
The Flex Power Tools ORE 3-150 EC 230/BS Random Orbit Sander has a brushless motor with greater efficiency and longer service life. The sanding speed can be adjusted to the task at hand thanks to electronic speed adjustment. Equipped with disc brake, as a result no unwanted sanding marks are produced on the workpiece and expensive corrective finishing is not required.Its ergonomic design incorporates a special balancing system for low-vibration operation. Ideal for fatigue-free and joint-friendly work. Especially suitable for overhead work.The hook & loop backing pad with multi-hose system provides optimum extraction, suited to all standard 150mm diameter abrasives. It provides effective dust extraction thanks to integrated extractor for dust-free working with filter cartridge. The impact-resistant filter cartridge features an exchangeable PES filter allowing simple dust disposal or cleaning of the filter as well as maximum service life. There is also an external dust extraction Ø 27mm, adaptor SAD-C 27 AS or antistatic suction hose SH 27x3,5m AS (445.045) can be connected.Specifications:Input Power: 400WNo Load Speed: 4,000 - 10,000/min.No Load Orbital Stroke Rate: 8,000 - 20,000/opm.Stroke: 3mmBacking Pad: Ø 150mmCable Length: 4.0mDust Extraction Connection: Ø 27mmWeight: 1.4kg
Flex Power Tools ORE 5-150 EC 230/BS Random-orbit Sander comes with a brushless motor for greater efficiency and a longer service life. Ergonomically designed with a special balancing system for low-vibration operation. Provides comfortable and joint-friendly working conditions. Equipped with disc brake, as a result no unwanted sanding marks are produced on the workpiece and expensive corrective finishing is not required.Effective dust extraction thanks to integrated extractor for dust-free working with filter cartridge. You also have the option of external dust extraction, the SAD-C 27 AS adaptor (NOT SUPPLIED) or antistatic suction hose SH 27x3,5m AS (445.045) can be connected (NOT SUPPLIED). The impact-resistant filter cartridge features an exchangeable PES filter, allows simple dust disposal or cleaning of the filter as well as maximum service life.Specifications:Input Power: 400WNo Load Speed: 4,000 - 10,000/min.Stroke: 5mmBacking Pad Diameter: 150mmDust Extraction Connection: 27mm ØCable Length: 4.0mWeight: 1.4kg
The Flex Power Tools OSE 2-80 18-EC C Orbital Sander has a brushless motor with greater efficiency and longer service life. Its ergonomically designed, handy grip cover with soft grip insert ensures a secure grip and good guidance. Electronic speed preselection with 4 settings, allows you to adjust the speed to the job at hand.Lightweight, compact one-handed design with low vibration. Ideal for fatigue-free and joint-friendly work. The E-signal switch provides simple, safe operation with quick-stop function prevents trailing of the backing pad. The electronic management system (EMS) protects the machine, extends the service life, and increases efficiency.The hook & loop backing pad has a 12-hole system for optimum extraction, suitable for all standard abrasives. Use a dust bag or attach to a vacuum. External dust extraction Ø 27mm, antistatic suction hose SH 27x3,5m AS (445.045) can be connected.Comes as a bare unit, NO battery or charger. FLEX battery system: suitable for all FLEX 18 V battery packs. Delivery does not include battery and charger.Specifications:No Load Speed: 6,000 - 10,000/min.No Load Orbital Stroke Rate: 12,000 - 20,000/opm.Stroke: 2mmDust Extraction Connection: Ø 27mmWeight: 1.0kg (without battery pack)
The Flex Power Tools OSE 2-80 EC Compact Orbital Sander has a brushless motor with greater efficiency and longer service life. Its ergonomically designed, handy grip cover with soft grip insert ensures a secure grip and good guidance. Various electronic controls: speed preselection with 4 settings, constant speed control by means of tachogenerator, soft start, restart protection for added control.Lightweight, compact one-handed design with low vibration. Ideal for fatigue-free and joint-friendly work. Especially suitable for overhead work. The E-signal switch provides simple, safe operation with quick-stop function prevents trailing of the backing pad. Equipped with disc brake, as a result no unwanted sanding marks are produced on the workpiece and expensive corrective finishing is not required.The hook & loop backing pad has a 12-hole system for optimum extraction, suitable for all standard abrasives. It provides effective dust extraction thanks to integrated extractor for dust-free working with filter cartridge. The impact-resistant filter cartridge features an exchangeable PES filter that allows simple dust disposal or cleaning of the filter as well as maximum service life. There is also an external dust extraction Ø 27mm, antistatic suction hose SH 27x3,5m AS (445.045) can be connected.Specifications:Input Power: 260WNo Load Speed: 8,000 - 12,000/min.No Load Orbital Stroke Rate: 16,000 - 24,000/opm.Backing Pad (L x W): 130 x 80mmStroke: 2mmCable Length: 4.0mDust Extraction Connection: Ø 27mmWeight: 1.2kg
The Flex Power Tools Power P-Set 18-88 R Battery & Charger Set contains:2 x AP 18.0/8.0 Batteries 18V 8.0Ah Li-ion1 x Flex Rapid Charger is suitable for charging 10.8 and 18V battery packs. It has a large-format LCD display for battery diagnostics and charge levels. It features an integrated battery pack cooler and overheating, discharge and overload protection. A special procedure charges 80% of the capacity after about 30 minutes.Charging Time: approx. 40 min. for 18.0V/2.5Ah and approx. 50 min. for 18.0V/5.0Ah.
The Flex Power Tools Power P-Set 55 R/BS Battery & Charger Set contains:2 x AP 18.0/5.0 Batteries 18V 5.0Ah Li-ion1 x Flex Rapid Charger is suitable for charging 10.8 and 18V battery packs. It has a large-format LCD display for battery diagnostics and charge levels. It features an integrated battery pack cooler and overheating, discharge and overload protection. A special procedure charges 80% of the capacity after about 30 minutes.Charging Time: approx. 40 min. for 18.0V/2.5Ah and approx. 50 min. for 18.0V/5.0Ah.
Range of Flex Power Tools replacement filtres and bags. Suitable for the VCE35L Vacuum.The Flex Power Tools Paper Filter Bags are suitable for the following Flex vacuum cleaner models: S36, S36M, VC35L and VCE 35 LAC. They are made from tear-resistant paper. Supplied in a pack of 5.
The Flex Power Tools PD 2G 18.0-EC HD C Combi Drill has a brushless motor with greater efficiency and a longer service life. Turbo mode provides faster and more powerful drilling, up to 27% higher speed of rotation. It offers a maximum torque of 158Nm for screwing, drilling and percussion drilling, also in extreme applications. The chosen torque setting stays activated when switching from drilling to percussion drilling mode.The electronic management system (EMS) protects the machine, extends the service life, and increases efficiency. For added safety anti-kickback switches off the motor in case of jamming to prevent the wrist from twisting. There is also a quick-acting electronic brake.Fitted with an ergonomically designed, non-slip, soft grip handle. The accelerator trigger has a lock-off switch for reduced use fatigue during longer operations. There is also an integrated LED lamp with persistence function and LED battery capacity display.Comes as a bare unit, NO battery or charger. FLEX battery system: suitable for all FLEX 18 V battery packs. Delivery does not include battery and charger.Supplied with: attachable auxiliary handle, belt clip and bit storage.Specifications:Chuck: 1.5 - 13mmNo Load Speed: 0-700/0-2,500/min.Impact Rate: 0 - 40,000/bpmTorque Adjustments: 23 StepsMax. Torque, Soft/Hard: 70/158NmMax. Drilling Diameter: Wood 89mm, Steel 13mmWeight: 1.7kg (without battery pack)
The Flex POLISHFLEX is a variable-speed polisher with a high torque. It has a powerful 1,400 watt motor with highly-efficient ventilator for optimum cooling, making it ideal for heavy-duty applications. Its VR electronic control allows stepless speed selection, constant speed control by means of tachogenerator, overload protection and temperature monitoring. The continuous speed control trigger allows the speed to be locked on for continuous operation. The innovative combination of planetary and angular gears reduces noise to an absolute minimum. The flat gear head reduces distance to the surface meaning that the machine can therefore be operated safely in any position. With a grip hood that is ergonomically shaped and soft grip handles, this machine can be controlled with precision and is always comfortable yet secure to hold. The polisher has a rubberised resting bar for safe setting down, and its 4 metre PUR H05-BQF cable is wear-resistant, flexible and highly resistant to cuts and abrasions. The spindle lock is ideally positioned to prevent operating error and does not interfere with the grip area. Specification Input Power: 1,400WOscillating Speed: 380-2,100/min.Max. Back-Up Pad Diameter: 150mmMax. Polishing Pad Diameter: 200mmTool Fixture: M14Weight: 2.3kgThe Flex Power Tools PE 142150 150mm Polisher Kit is supplied with: 1 x Handle1 x 150mm Hook & Loop Backing Pad1 x Polishing Sponge1 x Lambswool1 x Microfibre Cloth1 x Fine Polishing Compound1 x Polishing Compound2 x Case Inserts1 x Plastic Carrying Case
The Flex POLISHFLEX is a variable-speed polisher with a high torque. It has a powerful 1,400 watt motor with highly-efficient ventilator for optimum cooling, making it ideal for heavy-duty applications. Its VR electronic control allows stepless speed selection, constant speed control by means of tachogenerator, overload protection and temperature monitoring. The continuous speed control trigger allows the speed to be locked on for continuous operation. The innovative combination of planetary and angular gears reduces noise to an absolute minimum. The flat gear head reduces distance to the surface meaning that the machine can therefore be operated safely in any position. With a grip hood that is ergonomically shaped and soft grip handles, this machine can be controlled with precision and is always comfortable yet secure to hold. The polisher has a rubberised resting bar for safe setting down, and its 4 metre PUR H05-BQF cable is wear-resistant, flexible and highly resistant to cuts and abrasions. The spindle lock is ideally positioned to prevent operating error and does not interfere with the grip area. Specification Input Power: 1,400WOscillating Speed: 380-2,100/min.Max. Back-Up Pad Diameter: 150mmMax. Polishing Pad Diameter: 200mmTool Fixture: M14Weight: 2.3kgPolisher only. No accessories supplied.
The FLEX PE 150 18.0-EC Rotary Polisher has a highly efficient brushless motor with an innovative combination of planetary and angular gears, reducing noise to an absolute minimum. Its electronic management system (EMS) protects the machine, extends the service life and increases efficiency. Fitted with a continuous speed control trigger: for a gentle start and a lock-on for continuous operation. Polishes with low speed and high torque, e.g. for heat-sensitive surfaces. The machine can be operated safely in any position thanks to its flat gear head design. Ergonomically shaped grip hood with soft grip. The machine can be controlled with precision and is always comfortable yet secure to hold. The spindle lock is ideally positioned to prevent operating error and does not interfere with the grip area. Other features include a rubberised resting bar for safe setting down and an LED battery capacity display. Ideal for automotive, maritime and aviation applications. Bare Unit, No Battery or Charger Supplied Supplied with: 1 x Velcro Pad 150mm, 1 x Side Handle and 1 x L-BOXX® Carry Case Specification: No Load Speed: 150-1,450/min.Max. Polishing Pad Diameter: 160mmMax. Back-Up Pad Diameter: 150mmWeight: 1.9kg
