Dormer A125 HSS Extra Length Drill is a general purpose extra length drill that is ideal for long reach and deep hole applications and capable of drilling up to 10 times its diameter.
Dormer A125 HSS Extra Length Drill is a general purpose extra length drill that is ideal for long reach and deep hole applications and capable of drilling up to 10 times its diameter.
Dormer A125 HSS Extra Length Drill is a general purpose extra length drill that is ideal for long reach and deep hole applications and capable of drilling up to 10 times its diameter.
Dormer A125 HSS Extra Length Drill is a general purpose extra length drill that is ideal for long reach and deep hole applications and capable of drilling up to 10 times its diameter.
Dormer A125 HSS Extra Length Drill is a general purpose extra length drill that is ideal for long reach and deep hole applications and capable of drilling up to 10 times its diameter.
Dormer A130 HSS Taper Shank Drill for general purpose drilling applications. Has thinner web which minimises thrust requirements without compromising strength. Manufactured to: DIN 345RN/BS328/ISO 235.Tip diameter: 14.00mm.Working length: 108mm.Overall length: 189mm.
Dormer A130 HSS Taper Shank Drill for general purpose drilling applications. Has thinner web which minimises thrust requirements without compromising strength. Manufactured to: DIN 345RN/BS328/ISO 235.Tip diameter: 16.00mm.Working length: 120mm.Overall length: 218mm.
Dormer A170 Parallel shank drills with a standard helix, right hand spiral, 1/2in parallel shank drill, often referred to as a Blacksmiths drill. General purpose drill, ideal for a wide range of materials where chuck holding capacity is limited.Suitable for both hand and machine use. Tip diameter: 14 mm HSS.Working length: 83mm.Overall length: 156mm.
Dormer A170 Parallel shank drills with a standard helix, right hand spiral, 1/2in parallel shank drill, often referred to as a Blacksmiths drill. General purpose drill, ideal for a wide range of materials where chuck holding capacity is limited.Suitable for both hand and machine use. Tip diameter: 15 mm HSS.Working length: 83mm.Overall length: 156mm.
Dormer A170 Parallel shank drills with a standard helix, right hand spiral, 1/2in parallel shank drill, often referred to as a Blacksmiths drill. General purpose drill, ideal for a wide range of materials where chuck holding capacity is limited.Suitable for both hand and machine use. Tip diameter: 16 mm HSS.Working length: 84mm.Overall length: 157mm.
Dormer A170 Parallel shank drills with a standard helix, right hand spiral, 1/2in parallel shank drill, often referred to as a Blacksmiths drill. General purpose drill, ideal for a wide range of materials where chuck holding capacity is limited.Suitable for both hand and machine use. Tip diameter: 18.0 mm HSS.Working length: 84mm.Overall length: 157mm.
Dormer A170 Parallel shank drills with a standard helix, right hand spiral, 1/2in parallel shank drill, often referred to as a Blacksmiths drill. General purpose drill, ideal for a wide range of materials where chuck holding capacity is limited.Suitable for both hand and machine use. Tip diameter: 20.0 mm HSS.Working length: 84mm.Overall length: 157mm.
Dormer HSS number jobber drills in a plastic case with each size embossed for ease of identification. Contains 60 drills. Range of sizes from No 1 to No 60.
The Dormer A190 HSS Jobber Drill Sets features A100 HSS Jobber Drills that are ideal for general machining applications. Supplied in an attractive plastic case. A190 No.18 HSS Drill Set of 29: 1/16 - 1/2in x 64ths.Contains 29 drills. Range of sizes from 1/16th to 1/2in by 64ths,
The Dormer A190 HSS Jobber Drill Sets features A100 HSS Jobber Drills that are ideal for general machining applications. Supplied in an attractive plastic case. A190 No.18 HSS Drill Set of 29: 1/16 - 1/2in x 64ths.Contains 15 drills. Range of sizes from 1/16th to 1/2in by 32nds.
The Dormer A190 Imperial HSS Jobber Drill Sets feature A100 HSS Jobber drills that are ideal for general machining applications. Supplied in an attractive plastic case.Contains: 19 Drill Bits. Size: 1 mm to 10 mm x 0.5 mm increments.
The Dormer A190 Imperial HSS Jobber Drill Sets feature A100 HSS Jobber drills that are ideal for general machining applications. Supplied in an attractive plastic case.Contains: 51 drill bits. Range of sizes from 1.0 mm to 6.0 mm by 0.1 mm
The Dormer A190 Imperial HSS Jobber Drill Sets feature A100 HSS Jobber drills that are ideal for general machining applications. Supplied in an attractive plastic case.Contains: 25 drill bits. Range of sizes from 1.0 mm to 13.0 mm in 0.5 mm increments.
The Dormer A190 Imperial HSS Jobber Drill Sets feature A100 HSS Jobber drills that are ideal for general machining applications. Supplied in an attractive plastic case.Contains: 29 drill bits.Range of sizes from 1mm to 13mm by 0.5mm. & 3.3, 4.2, 6.8, 10.2mm
Dormer A191 HSS Metric Jobber Drills in plastic case with each size embossed for ease of identification.Contains: 13 drill bits. No.413: 13 Drills 1.5 to 6.5mm by 0.5mm & 3.3mm & 4.2mm.
Dormer A191 HSS Metric Jobber Drills in plastic case with each size embossed for ease of identification.Contains: 19 drill bits. Range of sizes from 1mm to 10mm by 0.5mm.
Dormer A200 HSS Centre Drill (DIN 333A) for drilling components that require machining between centres. Has a 118° point angle with a 60° included countersink.Tip diameter: 10mm.Working length: 4mm.Overall length: 56.0mm.
Dormer A200 HSS Centre Drill (DIN 333A) for drilling components that require machining between centres. Has a 118° point angle with a 60° included countersink.Tip diameter: 3.15mm.Working length: 0.80mm.Overall length: 25.0mm.
Dormer A200 HSS Centre Drill (DIN 333A) for drilling components that require machining between centres. Has a 118° point angle with a 60° included countersink.Tip diameter: 6.30mm.Working length: 2.50mm.Overall length: 45.0mm.
Dormer A200 HSS Centre Drill (DIN 333A) for drilling components that require machining between centres. Has a 118° point angle with a 60° included countersink.Tip diameter: 8mm.Working length: 3.15mm.Overall length: 50.0mm.
Dormer A225 HSS Centre Drill (BS 328) for drilling components that require machining between centres. Has a 120° point angle with a 60° included countersink. Suitable for both hand and machine use.Tip diameter: 1/4in. Working length: 3/32in.Overall length: 2in.
Dormer A225 HSS Centre Drill (BS 328) for drilling components that require machining between centres. Has a 120° point angle with a 60° included countersink. Suitable for both hand and machine use.Tip diameter: 1/8in. Working length: 3/64inOverall length: 1 1/2in.
Dormer A225 HSS Centre Drill (BS 328) for drilling components that require machining between centres. Has a 120° point angle with a 60° included countersink. Suitable for both hand and machine use.Tip diameter: 3/16in. Working length: 1/16in.Overall length: 1 3/4in.
Dormer A225 HSS Centre Drill (BS 328) for drilling components that require machining between centres. Has a 120° point angle with a 60° included countersink. Suitable for both hand and machine use.Tip diameter: 5/16in. Working length: 1/8in.Overall length: 2 1/4in.
Dormer A225 HSS Centre Drill (BS 328) for drilling components that require machining between centres. Has a 120° point angle with a 60° included countersink. Suitable for both hand and machine use.Tip diameter: 7/16in. Working length: 3/16in.Overall length: 2 1/2in.
A777 Metric Cobalt Jobber Drill Bits have a heavy-duty, 135° split point for use when greater heat is generated during drilling, e.g on higher tensile tougher materials and in particular the Aerospace Industry. Specification Flute Geometry: Standard Helix, Right hand spiral, Thick WebPoint Angle: 0.30 mm - 0.95 mm 118° Conical point1.00 mm to 1.40 mm inclusive 135° 4 facet point1.50 mm and above 135° split point sizes (Split point geometry to NAS 907 Areospace Specification type P3 Point) Surface Treatment: BronzeMaterial: HSCo Cobalt steel DIN 338 RN / BS328 / ISO 235Tip diameter: 1.0mmWorking length: 12mm.Overall length: 34mm.
A777 Metric Cobalt Jobber Drill Bits have a heavy-duty, 135° split point for use when greater heat is generated during drilling, e.g on higher tensile tougher materials and in particular the Aerospace Industry. Specification Flute Geometry: Standard Helix, Right hand spiral, Thick WebPoint Angle: 0.30 mm - 0.95 mm 118° Conical point1.00 mm to 1.40 mm inclusive 135° 4 facet point1.50 mm and above 135° split point sizes (Split point geometry to NAS 907 Areospace Specification type P3 Point) Surface Treatment: BronzeMaterial: HSCo Cobalt steel DIN 338 RN / BS328 / ISO 235Tip diameter: 1.50mmWorking length: 18mm.Overall length: 40mm.
A777 Imperial Cobalt Jobber Drill Bits have a heavy-duty, 135° split point for use when greater heat is generated during drilling, e.g on higher tensile tougher materials and in particular the Aerospace Industry. Specification Flute Geometry: Standard Helix, Right hand spiral, Thick WebPoint Angle: 0.30 mm - 0.95 mm 118° Conical point1.00 mm to 1.40 mm inclusive 135° 4 facet point1.50 mm and above 135° split point sizes (Split point geometry to NAS 907 Areospace Specification type P3 Point) Surface Treatment: BronzeMaterial: HSCo Cobalt steel DIN 338 RN / BS328 / ISO 235Tip diameter: 1/8in. Working length: 36mm.Overall length: 65mm.
A777 Metric Cobalt Jobber Drill Bits have a heavy-duty, 135° split point for use when greater heat is generated during drilling, e.g on higher tensile tougher materials and in particular the Aerospace Industry. Specification Flute Geometry: Standard Helix, Right hand spiral, Thick WebPoint Angle: 0.30 mm - 0.95 mm 118° Conical point1.00 mm to 1.40 mm inclusive 135° 4 facet point1.50 mm and above 135° split point sizes (Split point geometry to NAS 907 Areospace Specification type P3 Point) Surface Treatment: BronzeMaterial: HSCo Cobalt steel DIN 338 RN / BS328 / ISO 235Tip diameter: 10.0mmWorking length: 87mm.Overall length: 133mm.
A777 Metric Cobalt Jobber Drill Bits have a heavy-duty, 135° split point for use when greater heat is generated during drilling, e.g on higher tensile tougher materials and in particular the Aerospace Industry. Specification Flute Geometry: Standard Helix, Right hand spiral, Thick WebPoint Angle: 0.30 mm - 0.95 mm 118° Conical point1.00 mm to 1.40 mm inclusive 135° 4 facet point1.50 mm and above 135° split point sizes (Split point geometry to NAS 907 Areospace Specification type P3 Point) Surface Treatment: BronzeMaterial: HSCo Cobalt steel DIN 338 RN / BS328 / ISO 235Tip diameter: 10.50mm.Working length: 87mm.Overall length: 133mm.
A777 Metric Cobalt Jobber Drill Bits have a heavy-duty, 135° split point for use when greater heat is generated during drilling, e.g on higher tensile tougher materials and in particular the Aerospace Industry. Specification Flute Geometry: Standard Helix, Right hand spiral, Thick WebPoint Angle: 0.30 mm - 0.95 mm 118° Conical point1.00 mm to 1.40 mm inclusive 135° 4 facet point1.50 mm and above 135° split point sizes (Split point geometry to NAS 907 Areospace Specification type P3 Point) Surface Treatment: BronzeMaterial: HSCo Cobalt steel DIN 338 RN / BS328 / ISO 235Tip diameter: 12.0mmWorking length: 101mm.Overall length: 151mm.
