The DEWALT DCMPP568 XR Pruner makes short work of thick branches and other foliage. The blades are rust resistant and non-stick which makes them both easy to clean and highly resilient. Fitted with an ergonomic grip and a soft trigger for increased comfort and reduced fatique, even over long periods of operation. There is also a handy LED work light, ideal for work in dimly lit areas, etc. Perfect for tree surgeons, landscapers, gardeners and serious DIYers. Specifications: Cut Capacity: 38mm.Weight: 1.3kg (without Battery).This DEWALT DCMPP568N XR Pruner comes as a bare Unit, NO battery or charger supplied.
The DEWALT DCMPP568 XR Pruner makes short work of thick branches and other foliage. The blades are rust resistant and non-stick which makes them both easy to clean and highly resilient. Fitted with an ergonomic grip and a soft trigger for increased comfort and reduced fatique, even over long periods of operation. There is also a handy LED work light, ideal for work in dimly lit areas, etc. Perfect for tree surgeons, landscapers, gardeners and serious DIYers. Specifications: Cut Capacity: 38mm.Weight: 1.3kg (without Battery).The DEWALT DCMPP568P1 XR Pruner is supplied with: 1 x 18V 5.0Ah Li-ion Battery1 x DCB115 Charger
DEWALT DCMPS520 XR Pruning Saw with a powerful brushless motor giving higher performance, compact size and extended service life. Automatic oiling reduces maintenance requirements. Its two handles with additional hand protection increase user safety whilst providing better control of the saw. Other features inculde a safety switch-on lock, metal guard to reduce kick-back against hitting fences or walls plus the guard protects the chain from an ingress of dirt. The ideal pruning saw for professional general tree care using a continuously variable throttle switch for full safe performance control. Specification: Chain Speed: 8.6m/sec.Bar Length: 20cm.Weight: 2.0kg (without battery). This DEWALT DCMPS520N XR Pruning Saw comes as a Bare Unit, NO battery or charger supplied.
DEWALT DCMPS520 XR Pruning Saw with a powerful brushless motor giving higher performance, compact size and extended service life. Automatic oiling reduces maintenance requirements. Its two handles with additional hand protection increase user safety whilst providing better control of the saw. Other features inculde a safety switch-on lock, metal guard to reduce kick-back against hitting fences or walls plus the guard protects the chain from an ingress of dirt. The ideal pruning saw for professional general tree care using a continuously variable throttle switch for full safe performance control. Specification: Chain Speed: 8.6m/sec.Bar Length: 20cm.Weight: 2.0kg (without battery). This DEWALT DCMPS520P1 XR Pruning Saw is supplied with: 1 x 18V 5.0Ah Li-ion Battery.1 x Charger.
The DEWALT DCMPS567 XR Brushless Pole Saw offers professional performance with cordless convenience. It has a lightweight aluminium pole design with a length of 2m. This gives it the ability to reach up to 4.5m, so you can cut hard to reach branches without the use of a ladder. The 20cm bar length makes it ideal for fast cutting in hard to reach areas, construction tasks include landscaping, site clearance, branch pruning and shrubbing. The auto oiling system enables for smooth cutting performance and reduced maintenance. For improved safety the dual switch has been designed to reduce the risk of accidental start up. DCMPS567P1: 1 x 18V 5.0Ah Li-ion BatteryDCMPS567N: Bare Unit, No Battery or Charger Specification: Chain Speed: 6.5 m/sBar Length: 20cmOil Tank Capacity: 115mlWeight: 3.8kgThe DEWALT DCMPS567N XR Brushless Pole Saw is supplied as a Bare Unit, No Battery or Charger supplied.
The DEWALT DCMPS567 XR Brushless Pole Saw offers professional performance with cordless convenience. It has a lightweight aluminium pole design with a length of 2m. This gives it the ability to reach up to 4.5m, so you can cut hard to reach branches without the use of a ladder. The 20cm bar length makes it ideal for fast cutting in hard to reach areas, construction tasks include landscaping, site clearance, branch pruning and shrubbing. The auto oiling system enables for smooth cutting performance and reduced maintenance. For improved safety the dual switch has been designed to reduce the risk of accidental start up. DCMPS567P1: 1 x 18V 5.0Ah Li-ion BatteryDCMPS567N: Bare Unit, No Battery or Charger Specification: Chain Speed: 6.5 m/sBar Length: 20cmOil Tank Capacity: 115mlWeight: 3.8kgThe DEWALT DCMPS567P1 XR Brushless Pole Saw is supplied with: 1 x 18V 5.0Ah Li-ion Battery1 x 20cm Bar and Chain1 x XR Multi-Voltage Charger
The DEWALT DCMPW1600 XR Pressure Washer is powered by 2 x 18V XR Li-ion batteries (NOT SUPPLIED). Its powerful 36V brushless motorallows the washer to deliver three operating modes, Low (70 Bar), High (80 Bar) and a Boost Mode (110 Bar). These modes increase the intensity of the flow of water from the source. In Boost mode, the pressure washer will allow a maximum of 8mins at 110Bar before reverting to the previously selected mode. Its durable body is fitted with large 20cm rubber wheels, ideal for tough work sites. A built-in roll cage helps to protect it from work site knocks and bumps, as well as allowing for easier transport. All the accessories are either attached to the pressure washer or stored in a large compartment, which reduces the risk of loosing any of the accessories. Supplied with: 1 x Gun & Metal Lance.1 x 6m High Pressure Hose.1 x 3m Self-priming hose kit.1 x Turbo Rotating Nozzle.1 x Adjustable Fan-Pencil Nozzle.1 x 0.6L Foam Bottle.1 x Transparent Inlet Filter.1 x Hose Connector.1 x Nozzle Cleaning Pin. Comes as a Bare Unit, NO battery or charger. Specifications: Max. Pressure: 110 bar.Flow Rate: 4.5 L/min.Max. Water Feed Temperature: 50°C.Hose Length: 6m.Weight: 10.9kg.
The DEWALT DCMW564 Cordless XR Lawn Mower has a brushless motor for less maintenance, more power and lower noise levels. The 51cm metal deck provides additional durability and a 48cm cutting capacity to cover a wide area. The handle is ergonomic in design and ensures easy and comfortable steering. Also fitted with a bottom roller allowing easy and free flowing movement across the ground. There is a power actuation button for easy 'turn on/off' function and a secondary safety switch for added safety. Fitted with a 55L heavy-duty mesh fabric grass collection bag.DCMW564P2: 2 x 18V 5.0Ah Li-ion BatteriesDCMW564RN: Bare Unit, No Battery or ChargerSpecification:Cutting Width: 48cmCutting Height Adjustment: 5 Stages: 25, 38, 57, 74, 86mmGrassbox Capacity: 55LThe DEWALT DCMW564P2 XR Brushless Lawnmower is supplied with:2 x 18V 5.0Ah Li-ion Batteries1 x DCB115 Charger
The DEWALT DCMW564 Cordless XR Lawn Mower has a brushless motor for less maintenance, more power and lower noise levels. The 51cm metal deck provides additional durability and a 48cm cutting capacity to cover a wide area. The handle is ergonomic in design and ensures easy and comfortable steering. Also fitted with a bottom roller allowing easy and free flowing movement across the ground. There is a power actuation button for easy 'turn on/off' function and a secondary safety switch for added safety. Fitted with a 55L heavy-duty mesh fabric grass collection bag.DCMW564P2: 2 x 18V 5.0Ah Li-ion BatteriesDCMW564RN: Bare Unit, No Battery or ChargerSpecification:Cutting Width: 48cmCutting Height Adjustment: 5 Stages: 25, 38, 57, 74, 86mmGrassbox Capacity: 55LThe DEWALT DCMW564RN XR Brushless Lawnmower is supplied as a bare unit, no battery or charger supplied.
DEWALT DCMWP134 XR Push Mower with Direct Drive Brushless Autosensing Motor for improved run time, better cut quality and reduced stalling. Its 53cm high efficiency metal deck provides added durability. It offers Mulching, Bagging or Rear Discharge for natural lawn fertilisation or clip free lawn. Fitted with an ergonomic handle for easy and comfortable steering. A handy user interface incorporates a load meter allowing real time feedback. Easy 'One Touch Storage'. At the touch of a button, the telescopic handles fold down. This mower can be stored vertically, takes up 70% less space in vertical storage vs in operation. Powered by 2 x 18V batteries in series. Comes as a Bare Unit, NO battery or charger supplied. Specification: Cutting Width: 48cm.Cutting Height Adjustment: 25, 35, 45, 60, 85mm.Grass Box Capacity: 55 litre.
DEWALT DCMWP500 FlexVolt XR Push Mower with Direct Drive Brushless Autosensing Motor for improved run time, better cut quality and reduced stalling. Its 53cm high efficiency metal deck provides added durability. It offers Mulching, Bagging or Rear Discharge for natural lawn fertilisation or clip free lawn. Fitted with an ergonomic handle for easy and comfortable steering. A handy user interface incorporates a load meter allowing real time feedback. Easy 'One Touch Storage'. At the touch of a button, the telescopic handles fold down. This mower can be stored vertically, takes up 70% less space in vertical storage vs in operation. Comes as a Bare Unit, NO battery or charger supplied. Specification: Cutting Width: 48cm.Cutting Height Adjustment: 25, 35, 45, 60, 85mm.Grass Box Capacity: 55 litre.
DEWALT DCMWSP156N XR Rear Wheel Drive Lawnmower with Direct Drive Brushless Autosensing Motor for improved run time, better cut quality and reduced stalling. Its 53cm high efficiency metal deck provides added durability. It offers Mulching, Bagging or Rear Discharge for natural lawn fertilisation or clip free lawn. Fitted with an ergonomic handle for easy and comfortable steering. A handy user interface incorporates a load meter allowing real time feedback. Easy 'One Touch Storage'. At the touch of a button, the telescopic handles fold down. This mower can be stored vertically, takes up 70% less space in vertical storage vs in operation. Powered by 2 x 18V batteries in series. Comes as a Bare Unit, NO battery or charger supplied. Specification: Cutting Width: 48cm.Cutting Height Adjustment: 25, 35, 45, 60, 85mm.Grass Box Capacity: 55 litre.
DEWALT DCMWSP550 Rear Wheel Drive Mower with Direct Drive Brushless Autosensing Motor for improved run time, better cut quality and reduced stalling. Its 53cm high efficiency metal deck provides added durability. It offers Mulching, Bagging or Rear Discharge for natural lawn fertilisation or clip free lawn. Fitted with an ergonomic handle for easy and comfortable steering. A handy user interface incorporates a load meter allowing real time feedback. Easy 'One Touch Storage'. At the touch of a button, the telescopic handles fold down. This mower can be stored vertically, takes up 70% less space in vertical storage vs in operation. Comes as a Bare Unit, NO battery or charger supplied. Specification: Cutting Width: 48cm.Cutting Height Adjustment: 25, 35, 45, 60, 85mm.Grass Box Capacity: 55 litre.
The DEWALT DCN45RND2 XR Brushless Roofing Coil Nailer is supplied with: 2 x 18V 2.0Ah Li-ion Batteries*1 x 10.8-18V DCB115 XR Multi-Voltage Li-ion Charger1 x TSTAK™ Kitbox *500 nails per charge
The DEWALT DCN660 XR Brushless Second Fix Nailer with brushless motor technology, offering runtime that cannot be beaten in a compact package. It has a compact, lightweight and ergonomic design that makes the tool easy and comfortable to use, but durable enough for the worksite environment. The depth of drive can be easily adjusted using the handy thumb wheel depth adjuster. The mechanical rather than gas operation offers low running costs and consistent performance, even at low temperatures. Sequential mode allows for precision placement and the bump operating mode provides the user with production speed of up to 4 nails per second. For safety the nailer has a trigger and contact trip lock-off and prevents accidental dis-charge of fastener. The tool free stall/jam clearance minimises down time. DCN660P2: 2 x 18 Volt 5.0Ah Li-Ion Batteries.DCN660D2: 2 x 18 Volt 2.0Ah Li-Ion Batteries.DCN660N: Bare Unit, No Battery or Charger Supplied. Specification Fires 16 Gauge Nails 32-63mm, Diameter: 1.6mmMagazine Angle: 20°.Magazine Capacity: 110 Nails.Magazine Loading: Rear Load.Trigger Type: Bump & Sequential.Size (LxWxH): 310 x 95 x 305mm.Temperature Range: -20 to 50°C.Weight: 2.7kg.The DEWALT DCN660D2 XR Brushless Second Fix Nailer 18 Volt comes with: 2 x 18 Volt 2.0Ah Li-Ion Batteries. 1 x Multi-Voltage XR Li-Ion Charger.1 x Heavy-Duty Carrying Case.
The DEWALT DCN660 XR Brushless Second Fix Nailer with brushless motor technology, offering runtime that cannot be beaten in a compact package. It has a compact, lightweight and ergonomic design that makes the tool easy and comfortable to use, but durable enough for the worksite environment. The depth of drive can be easily adjusted using the handy thumb wheel depth adjuster. The mechanical rather than gas operation offers low running costs and consistent performance, even at low temperatures. Sequential mode allows for precision placement and the bump operating mode provides the user with production speed of up to 4 nails per second. For safety the nailer has a trigger and contact trip lock-off and prevents accidental dis-charge of fastener. The tool free stall/jam clearance minimises down time. DCN660P2: 2 x 18 Volt 5.0Ah Li-Ion Batteries.DCN660D2: 2 x 18 Volt 2.0Ah Li-Ion Batteries.DCN660N: Bare Unit, No Battery or Charger Supplied. Specification Fires 16 Gauge Nails 32-63mm, Diameter: 1.6mmMagazine Angle: 20°.Magazine Capacity: 110 Nails.Magazine Loading: Rear Load.Trigger Type: Bump & Sequential.Size (LxWxH): 310 x 95 x 305mm.Temperature Range: -20 to 50°C.Weight: 2.7kg.DEWALT DCN660N XR Brushless Second Fix Nailer 18 Volt Bare Unit, No Battery or Charger Supplied.
The DEWALT DCN660 XR Brushless Second Fix Nailer with brushless motor technology, offering runtime that cannot be beaten in a compact package. It has a compact, lightweight and ergonomic design that makes the tool easy and comfortable to use, but durable enough for the worksite environment. The depth of drive can be easily adjusted using the handy thumb wheel depth adjuster. The mechanical rather than gas operation offers low running costs and consistent performance, even at low temperatures. Sequential mode allows for precision placement and the bump operating mode provides the user with production speed of up to 4 nails per second. For safety the nailer has a trigger and contact trip lock-off and prevents accidental dis-charge of fastener. The tool free stall/jam clearance minimises down time. DCN660P2: 2 x 18 Volt 5.0Ah Li-Ion Batteries.DCN660D2: 2 x 18 Volt 2.0Ah Li-Ion Batteries.DCN660N: Bare Unit, No Battery or Charger Supplied. Specification Fires 16 Gauge Nails 32-63mm, Diameter: 1.6mmMagazine Angle: 20°.Magazine Capacity: 110 Nails.Magazine Loading: Rear Load.Trigger Type: Bump & Sequential.Size (LxWxH): 310 x 95 x 305mm.Temperature Range: -20 to 50°C.Weight: 2.7kg.The DEWALT DCN660P2 XR Brushless Second Fix Nailer 18 Volt comes with: 2 x 18 Volt 5.0Ah Li-Ion Batteries. 1 x Multi-Voltage XR Li-Ion Charger.1 x Heavy-Duty Carrying Case.
The DEWALT DCN680 Brushless XR 18 Gauge Brad Nailer has a compact, lightweight and ergonomic design that makes the tool easy and comfortable to use but durable enough for the work site environment. Mechanical rather than gas operation offers low running costs and consistent performance, even at low temperatures. Fitted with a brushless motor that offers increased runtime and durability. Trigger and contact trip lock-off prevent accidental discharge of fastener. With tool free stall/jam clearance to minimise down time. The depth of drive can be easily adjusted using the thumb wheel depth adjuster. Two modes of operation: Sequential mode allows for precision placement, Bump operating mode provides the user with production speed of up to 4 nails per second. DCN680D2: 2 x 18 Volt 2.0Ah Li-Ion Batteries.DCN680N: Bare Unit, No Battery or Charger. Specification Magazine Capacity: 110.Fires: Nails: Length: 15-54mm. Diameter: 1.25mm.Nailer Operating Mode: Bump & Sequential.Magazine Angle: 0°.Weight: 2.4kg.The DEWALT DCN680N Brushless XR 18 Gauge Brad Nailer is supplied as a Bare Unit, NO battery or charger.
The DEWALT DCN681 Cordless XR Brushless Stapler has a compact, lightweight design that is easy and comfortable to use but durable enough for a worksite environment. It is fitted with a brushless motor for optimum runtime and performance. Uses mechanical rather than gas operation for low running costs and consistent performance, even at low temperatures. Sequential mode allows for precision placement and the bump operating mode provides the user with production speed of up to 4 nails per second. The depth of drive can be easily adjusted using the thumb wheel depth adjuster. DCN681D2: 2 x 18 Volt 2.0Ah Li-ion BatteriesDCN681N: Bare Unit, No Battery or Charger Specifcation: Nail Length: 12-38mm.Nail Diameter: 1.25mm (18Ga).Magazine Capacity: 110 Nails.Magazine Angle: 0°.Weight: 2.6kg.The DEWALT DCN681N XR Brushless 18G Narrow Crown Stapler is supplied as a bare unit, no battery or charger.
The DEWALT DCN682 Cordless XR Brushless Floor Stapler has a compact, lightweight design that is easy and comfortable to use but durable enough for a worksite environment. It is fitted with a brushless motor for optimum runtime and performance. Uses mechanical rather than gas operation for low running costs and consistent performance, even at low temperatures. Sequential mode allows for precision placement and the bump operating mode provides the user with production speed of up to 4 nails per second. The depth of drive can be easily adjusted using the thumb wheel depth adjuster. DCN682D2: 2 x 18 Volt 2.0Ah Li-ion BatteriesDCN682N: Bare Unit, No Battery or Charger Specifcation: Nail Length: 12-38mm.Nail Diameter: 1.25mm (18Ga).Magazine Capacity: 110 Nails.Magazine Angle: 0°.Weight: 2.9kg.The DEWALT DCN682N XR Brushless 18G Floor Stapler is supplied as a bare unit, no battery or charger supplied.
The DEWALT DCN692 Cordless XR First Fix Nailer has two speeds (or power levels) to optimise the nailer for firing all lengths of nails. Its BRUSHLESS motor technology offers the power to fire 90mm ring shank nails into soft wood and 63mm into hard woods. The nailer has two modes. The sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.Its mechanical rather than gas operation offers consistant performance and minimises cleaning/service requirements. Tool free stall/jam clearance minimises user down time. The DCN692 has a versatile 30-34° magazine angle that will accept most clipped head and off centre round head paper tape or wire weld collated framing nails. Depths can be easily adjusted using the thumb wheel depth adjuster. The nailer has excellent vibration and sound figures, which offer fantastic user protection. The tool has an ergonomic design to allow the nailer to fit easily between a 400mm centre stud. A reversable belt/rafter hook povides increased portability and versatility on the job site. Increased visibility and durability along with protection for work-surface from the non-mar contact trip with lock-off to prevent accidental discharge of the fastener. Specification Input Power: 18 Volt.Nail Diameter: 2.8-3.3mm.Nail length: 50-90mm.Magazine Capacity: up to 55 nails.Firing mode: Bump and Sequential.Weight: 4.1kg.DEWALT DCN692N Cordless XR 2 Speed Framing Nailer Bare unit, NO battery or charger supplied.
The DEWALT DCN692 Cordless XR First Fix Nailer has two speeds (or power levels) to optimise the nailer for firing all lengths of nails. Its BRUSHLESS motor technology offers the power to fire 90mm ring shank nails into soft wood and 63mm into hard woods. The nailer has two modes. The sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed.Its mechanical rather than gas operation offers consistant performance and minimises cleaning/service requirements. Tool free stall/jam clearance minimises user down time. The DCN692 has a versatile 30-34° magazine angle that will accept most clipped head and off centre round head paper tape or wire weld collated framing nails. Depths can be easily adjusted using the thumb wheel depth adjuster. The nailer has excellent vibration and sound figures, which offer fantastic user protection. The tool has an ergonomic design to allow the nailer to fit easily between a 400mm centre stud. A reversable belt/rafter hook povides increased portability and versatility on the job site. Increased visibility and durability along with protection for work-surface from the non-mar contact trip with lock-off to prevent accidental discharge of the fastener. Specification Input Power: 18 Volt.Nail Diameter: 2.8-3.3mm.Nail length: 50-90mm.Magazine Capacity: up to 55 nails.Firing mode: Bump and Sequential.Weight: 4.1kg.DEWALT DCN692P2 Cordless XR First Fix Nailer is supplied with the following: 2 x 18 Volt 5.0Ah XR Li-Ion Batteries.1 x Reversible Belt Hook.1 x Non-Mar Tip.1 x Multi-Voltage XR Charger.1 x Heavy-Duty Carrying Case.
The DEWALT DCN694 XR Metal Connector Nailer is a cordless gas free solution for working with timber frame metal connector brackets. Powered by a powerful brushless motor and DEWALT 18V XR battery technology. Rapid Cycle Sequential mode offers all of the speed of 'bump' mode, for use in areas where only Sequential tools can be used. Its two speeds allows for firing all lengths of nails. Its versatile 30 - 34 degree magazine angle will accept most clipped head, and off centre round head paper tape or wire weld collated framing nails. Depths can be easily adjusted using the thumb wheel depth adjuster. The ergonomic tool design allows the nailer to fit easily between a 400mm centre stud. With increased visibility and durability along with protection for work-surfaces from the non-mar contact-trip. The hole alignment pin finds the hole quickly and positions the tool securely to ensure you hit the hole every time. Tool free stall/jam clearance minimises user down time. Dry fire lockout also ensures the tool is protected from firing without nails in the magazine. The user can engage contact trip lock-off and prevent accidental discharge of fastener. Supplied with a reversable belt/rafter hook for increased portability and versatility on the job-site. Comes as a Bare Unit, NO battery or charger supplied. Specifications: Nail Diameter: 3.4-4mm. Nail length: 35mm. Magazine Capacity: 27 nails. Weight: 3.6kg.
The DEWALT DCN701 XR Electrician's Stapler allows you to work without the need for hoses or cables. It has been specially designed for electricians. Mechanical rather than gas operation offers consistent performance at temperatures between -15°C and 50°C for minimal cleaning/service requirements. Dry fire lockout ensures that the tool is protected from firing without staples in the magazine. With class leading vibration and sound figures, for superb user protection. DCN701D2: 2 x 18V 2.0Ah Li-ion BatteriesDCN701N: Bare Unit, No Battery or Charger Specification: Magazine Capacity: 35 StaplesStaple Diameter: 1mmStaple Length: 25.4mmMagazine Angle: 0°Weight: 2.1kgThe DEWALT DCN701D2 XR Electrician's Stapler is supplied with: 2 x 18V 2.0Ah Li-ion Batteries1 x Multi-Voltage Charger1 x TSTAK VI Carry Case
The DEWALT DCN701 XR Electrician's Stapler allows you to work without the need for hoses or cables. It has been specially designed for electricians. Mechanical rather than gas operation offers consistent performance at temperatures between -15°C and 50°C for minimal cleaning/service requirements. Dry fire lockout ensures that the tool is protected from firing without staples in the magazine. With class leading vibration and sound figures, for superb user protection. DCN701D2: 2 x 18V 2.0Ah Li-ion BatteriesDCN701N: Bare Unit, No Battery or Charger Specification: Magazine Capacity: 35 StaplesStaple Diameter: 1mmStaple Length: 25.4mmMagazine Angle: 0°Weight: 2.1kgThe DEWALT DCN701N XR Electrician's Stapler is supplied as a bare unit, no battery or charger supplied.
The DEWALT DCP580 XR Brushless Planer has a powerful brushless motor that provides a smooth planing performance combined with extended run time. Lightweight, compact and ergonomic design for comfortable use in all orientations. The large twin blade drum is fitted with TCT blades for high quality surface finish. On-board blade storage and Torx key enable fast blade change, minimising downtime. With a large front and rear shoe for improved stability. It is compatible with the AirLock dust extraction system. DCP580P2: 2 x 18V 5.0Ah XR Li-ion Batteries.DCP580N: Bare Unit, No Battery or Charger Supplied.DWV9390: Replacement Dust Bag. Supplied with: 2 x Tungsten Carbide Tipped Reversible Blades, 1 x Hex Wrench, 1 x Torx Key, 1 x Guide Fence and 1 x Blade Alignment Plate. Specification No Load Speed: 15,000/min.Cutting Depth: 2mm, Rebate Depth: 9mmPlaner Width: 82mmWeight: 2.5kgThe DEWALT DCP580N XR Brushless Planer is supplied as a Bare Unit, No Battery or Charger Supplied.
The DEWALT DCP580 XR Brushless Planer has a powerful brushless motor that provides a smooth planing performance combined with extended run time. Lightweight, compact and ergonomic design for comfortable use in all orientations. The large twin blade drum is fitted with TCT blades for high quality surface finish. On-board blade storage and Torx key enable fast blade change, minimising downtime. With a large front and rear shoe for improved stability. It is compatible with the AirLock dust extraction system. DCP580P2: 2 x 18V 5.0Ah XR Li-ion Batteries.DCP580N: Bare Unit, No Battery or Charger Supplied.DWV9390: Replacement Dust Bag. Supplied with: 2 x Tungsten Carbide Tipped Reversible Blades, 1 x Hex Wrench, 1 x Torx Key, 1 x Guide Fence and 1 x Blade Alignment Plate. Specification No Load Speed: 15,000/min.Cutting Depth: 2mm, Rebate Depth: 9mmPlaner Width: 82mmWeight: 2.5kgThe DEWALT DCP580P2 XR Brushless Planer is supplied with the following: 2 x 18 Volt 5.0Ah Li-Ion Batteries2 x Tungsten Carbide Tipped Reversible Blades1 x Hex Wrench1 x Torx Key1 x Guide Fence1 x Blade Alignment Plate1 x DWV9390 Dust Bag1 x Multi-Voltage XR Charger1 x Heavy-Duty TSTAK Kitbox
The DEWALT DCR009 Compact Bluetooth Speaker is compact, powerful and extremely durable. Thanks to its IP67 rating its able to withstand dust and liquids, ideal for tough worksite conditions. Bluetooth 5.0 pairing allows you to connect with a device up to 30 metres away and at full volume it can emit an impressive 86dB. When at half volume, and fully charged, it can last for 16 hours. Front control buttons allows user to control audio directly from unit. This is a rechargeable Bluetooth speaker comes with a USB-A to USB-C charging cable. Specifications: Max. Volume: 86dB.Runtime: 16 Hours @ 50% Volume.Charge Time: 2 hours.IP Rating: IP67.
The DEWALT DCR011-XJ 10.8V / 18V / 54V Bluetooth® Speaker produces high-fidelity audio out of the high-quality speakers. The bass port maximises bass and range, and the Bluetooth® carries a range of up to 30m. You can stream audio from a mobile or plug-in directly with an aux cable. The carry handle and hang system, along with an over moulded side bumper and a metal speaker grill, gives the DCR011-XJ Bluetooth® Speaker portability and durability for transport and use on the site. The DCR011-XJ is compatible with DEWALT's full range of 10.8V, 18V and 54V batteries and is the perfect speaker for any site, job or tradesman. Bare Unit, No Battery Supplied.
The DEWALT DCR017 DAB radio charger has a DAB+ and FM tuner to receive digital and analogue radio signals. It is also a multi-voltage XR charger (with charge indicator LED light) which accepts DEWALT 10.8 Volt, 14.4 Volt and 18 Volt XR Li-Ion batteries. It has two AC power outlets which offer more versatility for jobsite power, a tech Box which provides protection and storage for smaller items. It is also fitted with a USB port in the Tech Box for device charging (when the DCR017 is connected to mains). It also has a 3.5mm auxiliary port which allows for connection to portable audio devices. The blow moulded roll cage has 6 impact resistance points for maximum durability, twin sets of woofers and tweeters with ported bass for high fidelity audio and is supplied with a 2 metre power cord with wrap-around cord storage. Specification Radio Range: DAB (+) / FM.Input Power: Battery: 10.8-18v Li-Ion, DC: 230/240v.Charging Time: 45-120min.Length: 420mm.Height: 310mm.Weight: 5.9kg.DEWALT DCR017 XR DAB Radio & Charger 240 Version. Bare Unit, no battery supplied with this radio.
The DEWALT DCR020 Digital Radio is a compact and robust DAB(+)/FM jobsite radio and can be powered by mains or by DEWALT 10.8-18 Volt XR Li-Ion batteries. The Tech Box, on-board storage protects portable audio devices and is fitted with a 3.5mm auxiliary port and a USB port that allows devices to be charged (USB charging AC only). The radio has an integral roll cage that provides impact resistance for maximum durability and a 1.8m powercord with wrap-around storage. PLEASE NOTE: This unit is a radio only and NOT suitable for charging. Bare Unit, No Battery Supplied. Specification Radio Range: DAB(+)/FM.Input Power: Battery: 10.8-18v Li-Ion, DC: 230/240v.Length: 240mm.Height: 245mm.Weight: 2.8kg.
