The DEWALT DCK2532P2 XR Twin Pack, contains the following: 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-850/0-2,100/0-3,000/min.Impact Rate: 0-1,800/0-2,900/0-3,700/bpm.Max Torque: 26/80/203Nm.Weight: 1.56kg. 1 x 18V DCH273 Brushless XR 3 Mode Hammer is fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete. Modes: Rotary, SDS Hammer, Chisel Only.No Load Speed: 0-1,100/min.Impact Rate: 0-4,600/bpm.Impact Energy: 2.1 Joules.Capacity: Wood: 26mm, Metal: 13mm, Masonry: 24mmWeight: 3.1kg. 1 x 10.8-18V DCB115 Multi-Voltage XR Charger Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries and 1 x DWST1-71195 TSTAK™ Deep Toolbox.
The DEWALT DCK259M2T Brushless Twin Pack, contains the following: 1 x 18V DCD795 Brushless Compact Hammer Drill with ultra compact and lightweight design for use in confined spaces. With 2-speed, all-metal transmission. LED work light for better visibility. Chuck: 13mm.No Load Speed: 0-600/0-2,000/min.Impact Rate: 0-10,200/0-34,000/min.Max Torque: 60Nm.Capacity: Wood: 38mm, Steel: 13mm, Masonry: 13mm. 1 x 18V DCF886 Brushless Impact Driver with brushless motor technology, aluminium front housing and an ergonomic handle. 3 LEDs provide work piece illumination. With 'drop in' keyless hex driver for a quick, one-handed fitment. Bit holder: 6.35mm (1/4in) hex.No Load Speed: 0-2,800/min.Impacts Per Minute: 0-3,200/bpm.Max Torque: 165Nm.Capacity: Bolt M12.Bare Weight: 0.96kg. Also comes with: 2 x 18V 4.0Ah Batteries, 1 x 10.8-18V DCB105 Multi-Voltage XR Charger and 1 x TSTAK V Kit Box
The DEWALT DCK264P2T XR Nailer Twin Pack, contains the following: 1 x 18V DCN660 Cordless XR Brushless Second Fix Nailer has a compact, lightweight and ergonomic design makes the tool easy and comfortable to use, but durable enough for the worksite environment. The depth of drive can be easily adjusted using the handy thumb wheel depth adjuster. Specifications: Nail Diameter: 1.6mm.Nail Length: 32 - 63mm.Magazine Angle: 20 degree.Magazine Capacity: 110 Nails.Weight: 2.7kg. 1 x 18V DCN692 Cordless XR Framing Nailer with two speeds to optimise the nailer for firing all lengths of nails. With brushless motor technology for excellent power and tool-free jam clearance to minimise down time. Suitable for many applications, including stud wall insulation, roofing, floor board and cladding installation etc. Specifications: Nail Diameter: 2.8-3.3mm.Nail Length: 50-90mm.Magazine Capacity: up to 55 nails.Firing Mode: Bump and Sequential.Weight: 4.1kg. 1 x 10.8-18V DCB115 Multi-Voltage XR Charger. Also supplied with 2 x 18V 5.0Ah Li-ion Batteries and 1 x TSTAK Mobile Storage Box.
The DEWALT DCK266M2T TSTAK™ Twin Kit, contains the following: 1 x 18V DCD796 XR Brushless Combi Drill which has an ultra-compact, lightweight design. The 2-speed all-metal transmission provides increased run time and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving. Chuck: 13mm Keyless.No Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/34,000/bpm.Torque: 27/70Nm, 15 Settings.Capacity: Masonry/Steel 13mm, Wood 40mm. 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-1,000/0-2,800/0-3,250/min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpm.Max. Torque: 26/80/205Nm.Weight: 1.56kg. Also supplied with: 1 x 10.8-18V DCB115 Multi-Voltage XR Charger, 2 x 18V 4.0Ah Li-ion Batteries and 1 x TSTAK™ Case.
The DEWALT DCK266P2 XR Brushless Twin Pack, contains the following: 1 x 18V DCD796 XR Brushless Hammer Drill Driver has an ultra compact, lightweight design. The two speed all metal transmission provides increased runtime and longer tool life. It offers a 15 position adjustable torque control for consistent screw driving. Chuck: 13mm Keyless.No Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/3,4000/bpmTorque: 27/70Nm, 15 Settings.Capacity: Steel: 13mm, Masonry: 13mm, Wood: 40mm 1 x 18V DCF887 XR Brushless Impact Driver is Equipped with application control, this is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. No Load Speed: 0-850/0-2,100/0-3,000/min.Impact Rate: 0-1,800/0-2,900/0-3,700/bpm.Torque: 26/80/203Nm. 1 x 10.8-18V DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-ion DEWALT Slide Pack 10.8V, 14.4V, and 18V batteries. Also supplied with 2 x 18V 5.0Ah Li-ion Batteries and 1 x TOUGHSYSTEM™ DS150 Toolbox.
The DEWALT DCK266P2LR XR Brushless Lanyard Ready Kit contains the following: 1 x 18V DCD796 XR Brushless Combi Drill has an ultra-compact, lightweight design. The 2-speed all-metal transmission provides increased run time and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving. Chuck: 13mm KeylessNo Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/34,000/bpmTorque: 27/70Nm, 15 SettingsCapacity: Masonry/Steel 13mm, Wood 40mm 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-1,000/0-2,800/0-3,250/min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpmMax. Torque: 26/80/205NmWeight: 1.56kg 2 x 18V DCB184LR XR Lanyard Ready Slide Batteries 5.0Ah Li-ion 1 x Multi Voltage Charger 1 x Soft bag
The DEWALT DCK266P2T Twin Pack, contains the following: 1 x 18V DCD796 XR Brushless Hammer Drill Driver has an ultra compact, lightweight design. The two speed all metal transmission provides increased runtime and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving. Chuck: 13mm.No Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/0-34,000/min.Max Torque: 70Nm.Capacity: Wood: 40mm, Steel: 13mm, Masonry: 13mm. 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-850/0-2,100/0-3,000/min.Impact Rate: 0-1,800/0-2,900/0-3,700/bpm.Max Torque: 26/80/203Nm.Weight: 1.56kg. 1 x 10.8-18V DCB115 XR Multi-Voltage Charger has a compact size, making it easy to store and it is also wall mountable. A bright LED indicator communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold conditions. It is capable of charging a 2.0Ah battery pack in 30 minutes. Voltage: 10.8/14.4/18V. Battery Chemistry: Li-ion Charging Current: 4.0 A. Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries and 1 x TSTAK™ II Toolbox.
The DEWALT DCK269P2 XR Twin Pack, contains the following: 1 x 18V DCF899 XR Brushless High Torque Impact Wrench with 3 speed and torque settings that gives you the control to best suit your application. The 1/2in (13mm) square drive with detent pin allows for more efficient torque delivery and excellent socket retention. Bit Holder: 1/2in Detent Pin.No Load Speed: 0-400/0-1,200/0-1,900/min.Impact Rate: 0-2,400/min.Max Torque: 950Nm, Breakaway Torque: 1,625Nm. Max Bolt Diameter: M20.Weight: 2.62kg. 1 x 18V DCG412 XR Premium Angle Grinder has a powerful fan cooled motor and intelligent variable speed trigger and lock-off switch for enhanced work safety and control. It features the XR Lithium Ion Technology and is part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster. No Load Speed: 7,000/min.Disc Diameter: 125mm, M14 Spindle.Weight: 3.0kg. 1 x 10.8-18V DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-ion DEWALT Slide Pack 10.8, 14.4, and 18V batteries. Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries and 1 x DS300 TOUGHSYSTEM™ Toolbox.
The DEWALT DCK276P2 Brushless Twin Pack, contains the following: 1 x 18V DCD996 XR Brushless Combi Drill with a tough 3 speed all metal transmission for increased run time and a longer tool life. Electronic Clutch with 11 position adjustable torque control for optimised precision when screwdriving. Also has an improved 3 position LED torch with high/medium/low settings. Chuck: 13mm Keyless. No Load Speed: 0-450/0-1,300/0-2,000/min.Impact Rate: 0-8,600/0-25,500/0-38,250/bpm.Max Torque: 95Nm, 11 Settings.Capacity: Wood: 55mm, Steel: 15mm, Masonry: 16mmWeight: 2.1kg. 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-850/0-2,100/0-3,000/min.Impact Rate: 0-1,800/0-2,900/0-3,700/bpm.Max Torque: 26/80/203Nm.Weight: 1.56kg. 1 x 10.8-18V DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-ion DEWALT Slide Pack 10.8, 14.4, and 18V batteries. Also supplied with 2 x 18V 5.0Ah Li-ion Batteries and 1 x DS150 TOUGHSYSTEM™ Toolbox.
The DEWALT DCK276T2T FlexVolt Twin Pack, contains the following: 1 x 18V DCD996 XR Brushless Combi Drill with a tough 3 speed all metal transmission for increased run time and a longer tool life. Electronic Clutch with 11 position adjustable torque control for optimised precision when screwdriving. Also has an improved 3 position LED torch with high/medium/low settings. Chuck: 13mm Keyless. ;No Load Speed: 0-450/0-1,300/0-2,000/Min.Impact Rate: 0-8,600/0-25,500/0-38,250/bpm.Max Torque: 95Nm, 11 Settings.Capacity: Wood: 55mm, Steel: 15mm, Masonry: 16mmWeight: 2.1kg. 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-850/0-2,100/0-3,000/Min.Impact Rate: 0-1,800/0-2,900/0-3,700/bpm.Max Torque: 26/80/203Nm.Weight: 1.56kg. 1 x 18-54 Volt DCB118 FlexVolt XR Fast Charger that will charge 54 Volt FlexVolt and 18V XR batteries. A bright LED indicator communicates battery charge status: charged, charging, power problem, and battery too hot or too cold conditions. It has a compact design that is wall mountable and fan cooled so it can charge efficiently between 4°C and 40°C. Also supplied with: 2 x 18/54 Volt 6.0/2.0Ah FlexVolt Li-ion Batteries, 2 x Belt Hooks, 1 x Side Handle for Combi Drill and 1 x DWST1-71195 TSTAK™ Deep Toolbox.
The DEWALT DCK278P2 XR Twin Pack, contains the following: 1 x 18V DCD996 XR Brushless Combi Drill with a tough 3 speed all metal transmission for increased run time and a longer tool life. Electronic Clutch with 11 position adjustable torque control for optimised precision when screwdriving. Also has an improved 3 position LED torch with high/medium/low settings. Chuck: 13mm Keyless. No Load Speed: 0-450/0-1,300/0-2,000/min.Impact Rate: 0-8,600/0-25,500/0-38,250/bpm.Max Torque: 95Nm, 11 Settings.Capacity: Wood: 55mm, Steel: 15mm, Masonry: 16mmWeight: 2.1kg. 1 x 18V DCG412 XR Premium Angle Grinder has a powerful fan cooled motor and intelligent variable speed trigger and lock-off switch for enhanced work safety and control. It features the XR Lithium Ion Technology and is part of the intelligent XR Lithium Ion Series designed for efficiency and making applications faster. No Load Speed: 7,000/min.Disc Diameter: 125mm, M14 Spindle.Weight: 3.0kg. 1 x 10.8-18V DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-ion DEWALT Slide Pack 10.8, 14.4, and 18V batteries. Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries and 1 x DS300 TOUGHSYSTEM™ Toolbox.
The DEWALT DCK305P2T XR Triple Kit, contains the following: 1 x 18V DCH273P2 XR Brushless 3 Mode Hammer, fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete. Modes: Rotary, SDS Hammer, Chisel OnlyNo Load Speed: 0-1,100/min.Impact Rate: 0-4,600/bpm with 2.1 joulesCapacity: Wood 26mm, Metal 13mm, Masonry 24mmWeight: 3.1kg 1 x 18V DCF887 XR Brushless Impact Driver, equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-1,000/0-2,800/0-3,250/min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpmMax. Torque: 26/80/205NmWeight: 1.56kg 1 x 18V DCG405 XR Brushless Grinder has a powerful fan cooled motor with a mesh cover that provides additional motor protection by preventing dust being sucked through the motor. Its electronic clutch reduces the kick back reaction in the event of a pinch or stall. The 2 position side handle provides greater control, whilst the rubber overmould provides enhanced grip and comfort. For added safety, the electronic brake stops the wheel quickly when the trigger is released. No Load Speed: 9,000/min.Disc Diameter: 125mm, M14 SpindleWeight: 1.75kg Also supplied with: 2 x 18V 5.0Ah Li-ion Batteries, 1 x XR Li-ion Charger, 1 x TSTAK I and 1 x TSTAK II.
The DEWALT DCK318PD XR Brushless Kit, contains the following: 1 x 12V DCD706 XR Brushless Sub-Compact Combi Drill has an extremely compact design, only 168mm long, allowing you to get into small, tight spaces. The Combi Drill has a 15 position adjustable torque control for consistent screwdriving, into a wide variety of materials. Chuck: 10mm Keyless.No Load Speed: 0-425/0-1,500/min.Impact Rate: 25,500/bpm.Max. Torque: 57.5Nm, 15 Settings.Capacity: Masonry/Steel 10mm, Wood 20mm.Weight: 1.2kg. The 12V DCS512 Brushless XR Circular Saw has a cast aluminium base for a repetitive, and accurate cut. The bevel angle is adjustable by up to 50 degree, and a lock-off switch, and electronic motor brake provide additional control, and work safety. The Saw is also fitted with an additional handle for safe two-handed work. No Load Speed: 3,600/min.Max. Cutting Depth: @90 degree 47mm, @45 degree 33mm.Bevel Capacity: 50 degree.Blade: 140 x 20mm Bore.Weight: 2.2kg. The 12V DCS353 XR Brushless Multi-Tool, with a dual-grip variable speed trigger, and lock-on feature allowing greater control when cutting, scraping, and sanding. A quick-change accessory system allows blades, and attachments to be changed quickly. The compact, lightweight design also allows improved access into confined spaces. No Load Speed: 0-18,000/min.Oscillation Angle: 1.6 degree.Weight: 0.86kg (without battery). Also supplied with: 1 x 12V 2.0Ah Li-ion Battery, 1 x 12V 5.0Ah Li-ion Battery, 1 x Multi-Voltage XR Charger & 1 x Toolbag.
The DEWALT DCK368P3T XR 3 Piece Kit, contains the following: 1 x 18V DCD796 XR Brushless Hammer Drill Driver which has an ultra compact, lightweight design. The two speed all metal transmission provides increased run time and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving. Chuck: 13mm Keyless.No Load Speed: 0-550/0-2,000/Min.Impact Rate: 0-9,350/34,000/bpm.Max Torque: 27/70Nm, 15 Settings.Capacity: Steel: 13mm, Masonry: 13mm, Wood: 40mm.Weight: 1.3kg. 1 x 18V DCF887 XR Brushless Impact Driver that is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-850/0-2,100/0-3,000/Min.Impact Rate: 0-1,800/0-2,900/0-3,700/bpm.Max Torque: 26/80/203Nm.Weight: 1.56kg. 1 x 18V DCH273 Brushless XR 3 Mode Hammer fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete. Modes: Rotary, SDS Hammer, Chisel Only.No Load Speed: 0-1,100/Min.Impact Rate: 0-4,600/bpm.Impact Energy: 2.1 Joules.Capacity: Wood: 26mm, Metal: 13mm, Masonry: 24mmWeight: 3.1kg. 1 x 10.8-18V DCB115 XR Multi-Voltage Charger which has a compact size, making it easy to store and it is also wall mountable. A bright LED indicator communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold conditions. It is capable of charging a 2.0Ah battery pack in 30 minutes. Also supplied with 3 x 18V 5.0Ah Li-ion Batteries and 2 x TSTAK™ II Toolboxes.
The DEWALT DCK623P3 XR Brushless 6 Piece Kit, contains the following: 1 x 18V DCD796 XR Brushless Compact Hammer Drill Driver has an ultra compact, lightweight design. The 2 speed, all metal transmission, provides increased runtime and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving. Chuck: 13mm KeylessNo Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/34,000/bpmMax. Torque: 27/70Nm, 15 SettingsCapacity: Steel 13mm, Masonry 13mm, Wood 40mmWeight: 1.3kg 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-1,000/0-2,800/0-3,250/min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpmMax. Torque: 26/80/205NmWeight: 1.56kg 1 x 18V DCG405 XR Brushless Grinder has a powerful fan cooled motor with a mesh cover that provides additional motor protection by preventing dust being sucked through the motor. Its electronic clutch reduces the kickback reaction in the event of a pinch or stall. The 2 position side handle provides greater control, whilst the rubber overmould provides enhanced grip and comfort. For added safety, the electronic brake stops the wheel quickly when the trigger is released. No Load Speed: 9,000/min.Disc Diameter: 125mm, M14 SpindleWeight: 1.75kg 1 x 18V DCS367 Brushless XR Reciprocating Saw has a compact design that allows for better access to hard to reach cuts. Offers improved balance and ease of handling due to central motor position. The 4 position blade clamp allows for flush cutting and improved versatility. There is a lever action keyless blade clamp for tool-free blade change and an LED work light for improved visibility of cut. No Load Speed: 0-2,900/min.Stroke Length: 28.6mmCapacity: Wood 300mm, Steel Sections & Pipes 100mm, PVC 160mmWeight: 2.3kg 1 x 18V DCS570 XR Brushless Circular Saw, ideal for general purpose ripping, cross-cutting and bevelling, for wood and other construction materials. It has a high torque brushless motor for improved durability and power. With a precise cutting depth scale, up to 65mm and a variable bevel angle, up to 57°. Its stable block construction provides low vibration running and increased service life. With an additional handle for safe 2 handed work. No Load Speed: 5,500/min.Max. Cutting Depth @90º: 64mmBlade: 184 x 16mm BoreBevel Capacity: 57° 1 x 18V XR Handheld LED Work Light is perfect for inspecting areas without electricity or natural light. Fitted with variable light settings for maximum brightness or extended runtime and a 250-500 lumen output with broad and even beam pattern. The articulating head has 9 positions for directional control of light output and an extendable hanging hook allows the work light to be suspended during use. Bulb Type: LEDLight Output: 250-500 lumens Protection Class: IP54 Also supplied with: 3 x 18V 5.0Ah Li-ion Batteries, 1 x 10.8-18V DCB115 XR Multi-Voltage Charger and 2 x TOUGHSYSTEM™ DS300 Toolboxes.
The DEWALT DCK663P3 XR Brushless 6 Piece Kit contains the following: 1 x 18V DCD796 XR Brushless Combi Drill has an ultra-compact, lightweight design. The 2-speed all-metal transmission provides increased run time and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving. Chuck: 13mm KeylessNo Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/34,000/bpmTorque: 27/70Nm, 15 SettingsCapacity: Masonry/Steel 13mm, Wood 40mm 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-1,000/0-2,800/0-3,250/min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpmMax. Torque: 26/80/205NmWeight: 1.56kg 1 x 18V DCS570 XR Brushless Circular Saw, ideal for general purpose ripping, cross-cutting and bevelling on wood and other construction materials. It has a high torque brushless motor for improved durability and power. With a precise cutting depth scale, up to 65mm and a variable bevel angle, up to 57 degree. Its stable block construction provides low vibration running and increased service life. With an additional handle for safe two-handed work. No Load Speed: 5,500/min.Max Cutting Depth @90º: 64mmBlade: 184 x 16mm BoreBevel Capacity: 57 degree 1 x 18V DCS334 XR Brushless Top Handle Jigsaw has an intelligent variable speed trigger, lock-off switch and 4-position pendulum action. The quick and easy keyless blade change system accepts T-shank blades. The tool-free adjustable shoe is fitted with an anti-scratch cover that bevels to 45 degree in both directions. The dust port is AirLock compatible. Strokes at No Load: 0-3,200/min.Stroke Length: 26mmBevel Capacity: 0-45 degreeCapacity: Metal 10mm, Wood 135mmWeight: 2.1kg 1 x 18V DCG405 125mm XR Brushless Grinder has a powerful fan cooled motor with a mesh cover that provides additional motor protection by preventing dust being sucked through the motor. Its electronic clutch reduces the kick back reaction in the event of a pinch or stall. The two position side handle provides greater control, whilst the rubber overmould provides enhanced grip and comfort. For added safety, the electronic brake stops the wheel quickly when the trigger is released. No Load Speed: 9,000/min.Disc Diameter: 125mmSpindle Thread: M14Weight: 1.75kg 1 x 18V DCL050 XR LED Work Light with variable light settings for maximum brightness or extended run time and a broad and even beam pattern. Perfect for inspecting areas without electricity or natural light. The articulating head has nine positions for directional control of light output and an extendable hanging hook allows the work light to be suspended during use. Light Output: 250-500 lumensProtection Class: IP54 Also supplied with: 3 x 18V 5.0Ah Li-ion Batteries, 1 x 10.8-18V DCB115 XR Multi-Voltage Li-ion Charger and 1 x DS300 TOUGHSYSTEM Toolbox
The DEWALT DCK664P3 XR Brushless 6 Piece Kit contains the following: 1 x 18V DCD996 XR Brushless Combi Drill with a tough 3-speed all-metal transmission for increased run time and longer tool life. Electronic clutch with an 11 position adjustable torque control for optimised precision when screwdriving. It also has an improved 3 position LED torch with high/medium/low settings. Chuck: 13mm KeylessNo Load Speed: 0-450/0-1,300/0-2,000/min.Impact Rate: 0-8,600/0-25,500/0-38,250/bpmMax. Torque: 95Nm, 11 SettingsCapacity: Masonry 16mm, Steel 15mm, Wood 55mmWeight: 2.1kg 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-1,000/0-2,800/0-3,250/min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpmMax. Torque: 26/80/205NmWeight: 1.56kg 1 x 18V DCS565 XR Brushless Circular Saw has an extremely durable design, including a cast aluminium base for repetitive, accurate cuts. With optimum balance for safe, fatigue-free operation. A lock-off switch and electronic motor brake provide additional control and work safety. The dust blower and LED work light provide improved cut line visibility. No Load Speed: 4,950/min.Max. Cutting Depth: @45 degree 42mm, @90 degree 55mmBevel Capacity: 50 degreeBlade Diameter x Bore: 165 x 20mmWeight: 2.8kg (without battery) 1 x 18V DCS334 XR Brushless Top Handle Jigsaw has an intelligent variable speed trigger, lock-off switch and 4-position pendulum action. The quick and easy keyless blade change system accepts T-shank blades. The tool-free adjustable shoe is fitted with an anti-scratch cover that bevels to 45 degree in both directions. The dust port is AirLock compatible. Strokes at No Load: 0-3,200/min.Stroke Length: 26mmBevel Capacity: 0-45 degreeCapacity: Metal 10mm, Wood 135mmWeight: 2.1kg 1 x 18V DCG405 125mm XR Brushless Grinder has a powerful fan cooled motor with a mesh cover that provides additional motor protection by preventing dust being sucked through the motor. Its electronic clutch reduces the kick back reaction in the event of a pinch or stall. The two position side handle provides greater control, whilst the rubber overmould provides enhanced grip and comfort. For added safety, the electronic brake stops the wheel quickly when the trigger is released. No Load Speed: 9,000/min.Disc Diameter: 125mmSpindle Thread: M14Weight: 1.75kg 1x DCL040 LED Torch Also supplied with: 3 x 18V 5.0Ah Li-ion Batteries, 1 x 10.8-18V DCB115 XR Multi-Voltage Li-ion Charger and 2 x DS300 TOUGHSYSTEM Toolboxes
The DEWALT DCK665P3T XR Compact Wood Working Kit, contains the following: 1 x 18V DCD796 XR Brushless Compact Hammer Drill Driver has an ultra compact, lightweight design. The two speed all metal transmission provides increased runtime and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving. Chuck: 13mm Keyless.No Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/34,000/bpm.Max Torque: 27/70Nm, 15 Settings.Capacity: Steel: 13mm, Masonry: 13mm, Wood: 40mm.Weight: 1.3kg. 1 x 18V DCP580 XR Brushless Planer has a powerful brushless motor that provides a smooth planning performance combined with extended run time. With on-board blade storage and Torx key enable fast blade change, minimising downtime. With a large front and rear shoe for improved stability. It is compatible with the AirLock dust extraction system. No Load Speed: 15,000/Min.Maximum Depth of Cut: 2mm.Rebating Depth: 9mm.Planer Width: 82mm.Weight: 2.5kg. 1 x 18V DCS355 XR Cordless Oscillating Multi-Tool delivers up to 57% more run time over brushed motors. It uses the quick-change accessory system that allows blades and attachments to be changed quickly without the use of tools. No Load Speed: 0-20,000/min. Length: 310mm.Weight: 1.06kg. 1 x 18V 165mm DCS391 Premium Circular Saw with an intelligent trigger allowing total control over all applications. It has a powerful and highly efficient PM58 fan cooled motor with replaceable brushes, which delivers up to 3,700 rotations per minute for a fast cutting action. It has a spindle lock for quick and easy blade change. No Load Speed: 3,700/min.Max Cutting Depth: @90°: 55mm, @45°: 42.1mm.Blade: 165 x 20mm Bore.Weight: 3.8kg. 1 x 18V DCS331 XR Premium Jigsaw is designed for efficiency and has a powerful and highly efficient DEWALT PM47 fan-cooled motor with replaceable brushes. The intelligent variable speed trigger and lock-off switch ensure quick controlled cuts and enhanced work safety and the quick and easy, patented keyless blade change system accepts T-shank blades. Strokes at No Load: 0-3,000/min.Levels of Pendulum Stroke: 4.Stroke Length: 26mm.Capacity: Wood: 135mm, Metal: 10mm.Weight: 3.1kg. 1 x 18V XR Li-ion Handheld LED Work Light is perfect for inspecting areas without electricity or natural light. Fitted with variable light settings for maximum brightness or extended run time and a 250-500 lumen output with broad and even beam pattern. The articulating head has nine positions for directional control of light output and an extendable hanging hook allows the work light to be suspended during use. Bulb Type: LED. Light Output: 250-500 lumens. Protection Class: IP54. 1 x 10.8-18V DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-ion DEWALT Slide Pack 10.8, 14.4, and 18V batteries. Supplied with 3 x 18V 5.0Ah Li-ion Slide Pack Batteries and 2 x DWST1-71195 TSTAK™ Deep Toolboxes.
The DEWALT DCK667P3T Brushless 6 Piece Kit, contains the following: 1 x 18V DCD796 XR Brushless Compact Combi Drill which has an ultra compact, lightweight design. The two speed all metal transmission provides increased runtime and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving. Chuck: 13mm.No Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/0-34,000/min.Max Torque: 70Nm.Capacity: Wood 40mm, Steel 13mm, Masonry 13mm. 1 x 18V DCP580 XR Brushless Planer has a powerful brushless motor which provides a smooth planing performance combined with extended run time. With on-board blade storage and Torx key to enable fast blade change, minimising downtime. It comes with a large front and rear shoe for improved stability. It is compatible with the AirLock dust extraction system. Comes with a dust bag. No Load Speed: 15,000/min.Cutting Depth: 2mm, Rebate Depth: 9mmPlaner Width: 82mmWeight: 2.5kg 1 x 18V DCS565 XR Brushless Circular Saw has an extremely durable design, including a cast aluminium base for repetitive, accurate cuts. With optimum balance for safe, fatigue-free operation. A lock-off switch and electronic motor brake provide additional control and work safety. The dust blower and LED work light provide improved cut line visibility. No Load Speed: 4,950/min.Max. Cutting Depth: @45 deg; 42mm, @90 deg; 55mmBevel Capacity: 50 deg;Blade Diameter x Bore: 165 x 20mmWeight: 2.8kg (without battery) 1 x 18V DCS355 XR Brushless Oscillating Multi-Tool delivers up to 57% more runtime over brushed motors. It uses the quick-change accessory system to allow blades and attachments to be changed quickly without the use of tools. No Load Speed: 0-20,000/min.Length: 310mmWeight: 1.06kg 1 x 18V DCS334 XR Brushless Top Handle Jigsaw has an intelligent variable speed trigger, lock-off switch and 4-position pendulum action. The quick and easy keyless blade change system accepts T-shank blades. The tool-free adjustable shoe is fitted with an anti-scratch cover which bevels to 45 deg; in both directions. The dust port is AirLock compatible. Strokes at No Load: 0-3,200/min.Stroke Length: 26mmBevel Capacity: 0-45 deg;Capacity: Metal 10mm, Wood 135mmWeight: 2.1kg 1 x 18V DCL050 XR LED Work Light with variable light settings for maximum brightness or extended run time and a broad and even beam pattern. Perfect for inspecting areas without electricity or natural light. The articulating head has nine positions for directional control of light output and an extendable hanging hook allows the work light to be suspended during use. Light Output: 250-500 lumensProtection Class: IP54 1 x 10.8-18V DCB115 XR Multi-Voltage Charger has a compact size, making it easy to store and it is also wall mountable. A bright LED indicator communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold conditions. It is capable of charging a 2.0Ah battery pack in 30 minutes. Voltage: 10.8/14.4/18V.Battery Chemistry: Li-ion.Charging Current: 4.0 A. Also supplied with: 3 x 18V 5.0Ah Batteries and 2 x Deep TSTAK Carry Cases.
The DEWALT DCK690P3T XR Brushless 6 Piece Kit contains the following: 1 x 18V DCD796 XR Brushless Combi Drill has an ultra-compact, lightweight design. The 2-speed all-metal transmission provides increased run time and longer tool life. It offers a 15 position adjustable torque control for consistent screwdriving. Chuck: 13mm KeylessNo Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/34,000/bpmTorque: 27/70Nm, 15 SettingsCapacity: Masonry/Steel 13mm, Wood 40mm 1 x 18V DCH273 XR Brushless SDS Plus 3-Mode Hammer is fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete. Modes: Rotary, SDS Hammer, Chisel OnlyNo Load Speed: 0-1,100/min.Impact Rate: 0-4,600/bpmImpact Energy: 2.1 joulesCapacity: Masonry: 24mm, Metal: 13mm, Wood: 26mmWeight: 3.1kg 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-1,000/0-2,800/0-3,250/min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpmMax. Torque: 26/80/205NmWeight: 1.56kg 1 x 18V DCS565 XR Brushless Circular Saw has an extremely durable design, including a cast aluminium base for repetitive, accurate cuts. With optimum balance for safe, fatigue-free operation. A lock-off switch and electronic motor brake provide additional control and work safety. The dust blower and LED work light provide improved cut line visibility. No Load Speed: 4,950/min.Max. Cutting Depth: @45 degree 42mm, @90 degree 55mmBevel Capacity: 50 degreeBlade Diameter x Bore: 165 x 20mmWeight: 2.8kg (without battery) 1 x 18V DCS334 XR Brushless Top Handle Jigsaw has an intelligent variable speed trigger, lock-off switch and 4-position pendulum action. The quick and easy keyless blade change system accepts T-shank blades. The tool-free adjustable shoe is fitted with an anti-scratch cover that bevels to 45 degree in both directions. The dust port is AirLock compatible. Strokes at No Load: 0-3,200/min.Stroke Length: 26mmBevel Capacity: 0-45 degreeCapacity: Metal 10mm, Wood 135mmWeight: 2.1kg 1 x 18V DCL040 XR LED Torch with a compact, lightweight design and an ergonomic, rubber grip for increased comfort. Impact resistant housing provides increased durability. The LED bulb produces a two zone light pattern. Its head pivots more than 90º vertically with a ratchet lock. Light Output: 110 lumens 1 x 10.8-18V DCB115 XR Multi-Voltage Charger has a compact size, making it easy to store and it is also wall mountable. A bright LED indicator communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold conditions. It is capable of charging a 2.0Ah battery pack in 30 minutes. Also supplied with 3 x 18V 5.0Ah Li-ion Batteries and 2 x TSTAK Deep Toolboxes.
The DEWALT DCK694P3 Brushless 3 Speed 6 Piece Kit, contains the following: 1 x 18V DCD995 Brushless XRP Hammer Drill with a tough three speed all metal transmission for increased runtime and longer tool life. Part of the intelligent XR Lithium Ion Series designed for efficiency and faster applications. Chuck: 1.5-13mm. No Load Speed: 0-450/0-1,300/0-2,000/min. Impact Rate: 0-7,650/0-22,100/0-34,000/min. Max Torque: 80Nm. Drilling Capacity Wood: 50mm, Steel: 13mm,Masonry: 16mm. 1 x 18V DCF886 Brushless Impact Driver with brushless motor technology, aluminium front housing and an ergonomic handle. 3 LEDs provide work piece illumination. With 'drop in' keyless hex driver for a quick, one-handed fitment. Bit holder: 6.35mm (1/4in) hex.No Load Speed: 0-2,800/min.Impacts Per Minute: 0-3,200/bpm.Max Torque: 165Nm.Capacity: Bolt M12. 1 x 18V DCS391 Circular Saw with an intelligent trigger allowing total control over all applications. It has a powerful and highly efficient PM58 fan cooled motor with replaceable brushes, which delivers up to 3,700 rotations per minute for a fast cutting action. No Load Speed: 3,700/min.Max Cutting Depth: @90°: 55mm, @45°: 55mm.Blade: 165 x 20mm bore.Weight: 3.8kg. 1 x 18V DCG412 Grinder has a powerful fan cooled motor and intelligent variable speed trigger and lock-off switch for enhanced work safety and control. No Load Speed: 7,000/min.Disc Diameter: 125mm, M14 Spindle.Weight: 3.0kg. 1 x 18V DCS331 Jigsaw has a keyless blade change and intelligent variable speed trigger. Accepts T-shank blades. Strokes at No Load: 0-3,000/min.Levels of Pendulum Stroke: 4.Stroke Length: 26mm.Capacity: Wood: 135mm, Metal: 10mm. 1 x 18V DCL040 LED Pivot Light has a compact, lightweight design with impact resistant housing and improved ergonomic design and rubber grip for increased comfort. The LED Bulb produces 110 Lumen output (10,000Hr Life) with a 2 zone light pattern. The flashlight head pivots more than 90º vertically with ratchet lock. 1 x 10.8-18V DCB105 Multi-Voltage XR Charger varies the charge rate according to battery type to increase battery pack life. It features diagnostics with bright LED indicator which communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold. Charges all XR Li-ion DEWALT Slide Pack 10.8, 14.4, and 18V batteries. Supplied with 3 x 18V 5.0Ah Li-ion Batteries and 2 x DS300 TOUGHSYSTEM™ Toolboxes
The DEWALT DCK694T3 Brushless 6 Piece Kit, contains the following: 1 x 18V DCD996 XR Brushless Combi Drill with a tough 3 speed all-metal transmission for increased run time and a longer tool life. Electronic Clutch with 11 position adjustable torque control for optimised precision when screwdriving. It also has an improved 3 position LED torch with high/medium/low settings. Chuck: 13mm KeylessNo Load Speed: 0-450/0-1,300/0-2,000/min.Impact Rate: 0-8,600/0-25,500/0-38,250/bpmMax. Torque: 95Nm, 11 SettingsCapacity: Wood 55mm, Steel 15mm, Masonry 16mmWeight: 2.1kg 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-1,000/0-2,800/0-3,250/min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpmMax Torque: 26/80/205NmWeight: 1.56kg 1 x 18V DCS391 Premium Circular Saw with an intelligent trigger allowing total control over all applications. It has a powerful and highly efficient PM58 fan cooled motor with replaceable brushes, which delivers up to 5,150 rotations per minute for a fast cutting action. It has a spindle lock for quick and easy blade change. No Load Speed: 5,150/min.Max. Cutting Depth: @90° 55mm, @45° 42.1mmBlade: 165 x 20mm BoreWeight: 3.8kg 1 x 18V DCG412 XR Premium Angle Grinder has a powerful fan cooled motor and intelligent variable speed trigger and lock-off switch for enhanced work safety and control. It features XR Lithium-ion Technology and is part of the intelligent XR Lithium-ion Series designed for efficiency and making applications faster. No Load Speed: 7,000/min.Disc Diameter: 125mmSpindle: M14Weight: 3.0kg 1 x 18V DCS331 XR Premium Jigsaw is designed for efficiency and has a powerful and highly efficient DEWALT PM47 fan-cooled motor with replaceable brushes. The intelligent variable speed trigger and lock-off switch ensure quick controlled cuts and enhanced work safety. Quick and easy, patented keyless blade change system accepts T-shank blades. Strokes at No Load: 0-3,000/min.Stroke Length: 26mmCapacity: Wood 135mm, Metal 10mmWeight: 3.1kg 1 x 18V DCL040 XR Torch is the latest generation work light, using LED Technology. Compact, lightweight design with impact resistant housing and improved ergonomic design and rubber grip for increased comfort. The LED bulb produces 110 lumen output (10,000 hr life) with a 2 zone light pattern. The flashlight head pivots more than 90º vertically with a ratchet lock. Also supplied with: 3 x 18/54V 6.0/2.0Ah FlexVolt Li-ion Batteries, 1 x DCB118 Multi-Voltage Charger, 2 x DS300 TOUGHSYSTEM™ Toolboxes
The DEWALT DCK699M3T XR 6 Piece Kit, contains the following: 1 x 18V DCD795 Brushless Compact Hammer Drill has a lightweight, compact design for use in confined spaces. With 2-speed, all-metal transmission and LED work light. Chuck: 13mm.No Load Speed: 0-600/0-2,000/min.Impact Rate: 0-10,200/0-34,000/min.Max Torque: 60Nm.Capacity: Wood: 38mm, Steel: 13mm, Masonry: 13mm 1 x 18V DCF887 Brushless Impact Driver with brushless motor technology, aluminium front housing and an ergonomic handle. 3 LEDs provide work piece illumination. With 'drop in' keyless hex driver for a quick, one-handed fitment. Bit Holder: 6.35mm (1/4in).No Load Speed: 0-1,000/0-2,800/0-3,250/Min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpm.Max Torque: 26/80/205Nm. 1 x 18V DCH253 SDS Hammer Drill is ideal for drilling anchors and fixing holes into concrete, brick and masonry from 4mm to 24mm. Has a rotation stop mode for light chiselling in plaster, tiles and render and an impact stop mode for rotary only drilling in wood and metal. No Load Speed: 0-1,200/min.Impact Rate: 0-4,500/min with 2.1 Joules.Capacity: Concrete: 24mm, Steel: 13mm, Wood: 26mm.Weight 3.1kg. 1 x 18V DCS331 Jigsaw has a keyless blade change and intelligent variable speed trigger. Accepts T-shank blades. Strokes at No Load: 0-3,000/min.Levels of Pendulum Stroke: 4.Stroke Length: 26mm.Capacity: Wood: 135mm, Metal: 10mm. 1 x 18V DCS391 Circular Saw with an intelligent trigger allowing total control over all applications. It has a powerful and highly efficient PM58 fan cooled motor with replaceable brushes, which delivers up to 3,700 rotations per minute for a fast cutting action. No Load Speed: 3,700/min.Max Cutting Depth: @90°: 55mm, @45°: 55mm.Blade: 165 x 20mm bore.Weight: 3.8kg. 1 x 18V DCL040 LED Pivot Light has a compact, lightweight design with impact resistant housing and improved ergonomic design and rubber grip for increased comfort. The LED Bulb produces 110 Lumen output (10,000Hr Life) with a 2 zone light pattern. The flashlight head pivots more than 90º vertically with ratchet lock. 1 x 10.8-18V DCB115 XR Multi-Voltage Charger has a compact size, making it easy to store and it is also wall mountable. A bright LED indicator communicates the battery charge status: charged, charging, power problem, and battery too hot or too cold conditions. It is capable of charging a 2.0Ah battery pack in 30 minutes. Supplied with 3 x 18V 4.0Ah Li-ion Batteries and 2 x DWST1-71195 TSTAK™ Deep Toolboxes.
The DEWALT DCK755P3T XR 7 Piece Kit, contains the following: 1 x 18V DCD796 XR Brushless Combi Drill has an ultra-compact, lightweight design. The 2-speed all-metal transmission provides increased run time and longer tool life. It offers a 15-position adjustable torque control for consistent screwdriving. Chuck: 13mm KeylessNo Load Speed: 0-550/0-2,000/min.Impact Rate: 0-9,350/34,000/bpmTorque: 27/70Nm, 15 SettingsCapacity: Steel 13mm, Masonry 13mm, Wood 40mm 1 x 18V DCF887 XR Brushless Impact Driver is equipped with application control. This is achieved through 3 motor speeds and torque settings. Precision Drive mode offers additional control in screwdriving applications to avoid material and fastener damage. It has a super lightweight and compact design. Bit Holder: 6.35mm (1/4in)No Load Speed: 0-1,000/0-2,800/0-3,250/min.Impact Rate: 0-1,800/0-2,900/0-3,800/bpmMax. Torque: 26/80/205NmWeight: 1.56kg 1 x 18V DCS355 XR Oscillating Multi-Tool delivers up to 57% more run time over brushed motors. It uses the quick-change accessory system that allows blades and attachments to be changed quickly without the use of tools. No Load Speed: 0-20,000/min. Length: 310mmWeight: 1.06kg 1 x 18V DCH273 XR Brushless SDS Plus 3-Mode Hammer is fitted with an electronic clutch for consistently high torque and improved durability. Ideal for drilling anchors and fixing holes into concrete. Modes: Rotary, SDS Hammer, Chisel OnlyNo Load Speed: 0-1,100/min.Impact Rate: 0-4,600/bpm with 2.1 joulesCapacity: Wood 26mm, Metal 13mm, Masonry 24mmWeight: 3.1kg 1 x 18V DCG405 XR Brushless Grinder with an electronic clutch that reduces the kickback reaction in the event of a pinch or stall. The 2-position side handle provides greater control, whilst the rubber overmould provides enhanced grip and comfort. For added safety, the electronic brake stops the wheel quickly when the trigger is released. No Load Speed: 9,000/min.Disc Diameter: 125mm, M14 SpindleWeight: 1.75kg 1 x 18V DCS570 XR Brushless Circular Saw, ideal for general-purpose ripping, cross-cutting and bevelling, for wood and other construction materials. It has a high torque brushless motor for improved durability and power. With a precise cutting depth scale, up to 65mm and a variable bevel angle, up to 57°. Its stable block construction provides low vibration running and increased service life. With an additional handle for safe two-handed work. No Load Speed: 5,500/min.Max. Cutting Depth: @90º 64mmBlade: 184 x 16mm BoreBevel Capacity: 57° 1 x 18V DCS334 XR Brushless Top Handle Jigsaw has an intelligent variable speed trigger, lock-off switch and 4-position pendulum action. Quick and easy keyless blade change system, accepts T-shank blades. The tool-free adjustable shoe is fitted with an anti-scratch cover, bevels to 45° in both directions. The dust port is AirLock compatible. Strokes No Load: 0-3,200/min.Stroke Length: 26mmBevel Capacity: 0-45°Capacity: Wood 135mm, Metal 10mmWeight: 2.1kg Also supplied with: 3 x 18V 5.0Ah Li-ion Batteries, 1 x 10.8-18V DCB115 XR Li-ion Charger, 1 x TSTAK™ VI Deep Toolbox (171195), 1 x TSTAK™ II Toolbox (Suitcase Flat Top) (170703) and 1 x TSTAK™ Mobile Storage with Extendable Handle (175799).
The DEWALT DCL040 is the latest generation 18 Volt Work Light, using LED Technology and featuring new XR Li-Ion technology. It has a compact, lightweight design with impact resistant housing and improved ergonomic design and rubber grip increase comfort. The LED Bulb producing 110 Lumen output (10,000Hr Life) with a 2 zone light pattern with the flashlight head pivots more than 90 degrees vertically with ratchet lock. The Flashlight includes an integrated hook for hanging and can be used free standing, with belt clip. PLEASE NOTE: 18 Volt Battery and charger sold separately Specification Bulb Type: LED.Height: 240mm.Length: 115mm.Weight: 260g.
The DEWALT DCL043 XR LED Spotlight provides a focused high intensity beam and delivers a maximum output of 1000 lumen. The beam has a distance rating of 400m and it has a rugged and durable design that is IP54 rated. The head pivots for directional lighting. Offers over 10 hours of runtime with a 5.0Ah Li-Ion Battery (NOT SUPPLIED). Bare Unit, No Battery or Charger Supplied. Specification Bulb Type: LED. Light Output: 120-1,000 Lumens. Protection Class: IP54.
The DEWALT DCL074 XR Tool Connect™ Area Light with 3 brightness settings, up to a maximum of 5000 lumens. It has a 360° beam pattern; the precision engineered lens with 150 flutes delivers a bright even beam pattern to illuminate entire working space. Fitted with a robust roll cage for increased durability, designed to withstand tough job site environments. With the Tool Connect™ app, users can wirelessly power on and off the unit as well as customise settings such as the light intensity, alerts for low charge and set individual schedules for the day, time and intensity. There is also a tripod mount and hang hook, which allow for versatile positioning. IP54 rated for water and dust protection. Bare Unit, No Battery or Charger Supplied. Specification: Light Output: 1,500/3,200/5,000 lumens
DEWALT DCL077 Compact Task Light with a 360° handle enabling use in multiple orientations. There is also an integral tripod mount. It has 3 light settings, the most powerful produces 2,000 lumens with a natural daylight hue. Compatible with DEWALT 10.8V, 12V, 18V XR Li-ion batteries. Bare Unit - No Battery or Charger supplied. Specification: Light Output: 500/1,000/2,000 lumens.
The DEWALT DCL079 XR LED Tripod Light is perfect for all trades so work can continue no matter the light conditions. Its compact size and durable construction mean it is easy to transport and store. The tripod base provides stability and means it is less likely to be knocked over. It produces a high power, broad and even beam. Providing light output across 3 brightness settings; 1000lm, 1800lm and 3000lm for different applications. The highest setting is 30% brighter than a 500W halogen light. 3500K warmer light colour to reduce glare. The light has an adjustable angle lamp, 240° rotatable lamp head with a 200° pivot angle for optimum light positioning. It has a durable construction, the lamp head is protected by an outer shell. IP55 rated against dust and water ingress protection enabling interior and exterior use. The telescopic pole can be adjusted up to 2.2m. Collapses down to 1m high for easy transportation and storage. Fitted with a carry handle. Supplied as a bare unit, no battery or charger supplied. Specification: Voltage: 18VMax. Light Output: 1,000/1,800/3,000 LumensMax. Height: 2m
The DEWALT DCL182 Rechargeable LED Task Light helps you toilluminate low-light work areas. Focus on the task at hand and work hands-free by using the flashlight's strong magnet and hook. Its durable housing is IP54 rated for dust and water protection.Supplied with 1 x Type C USB Cable. Specifications: Output (Low/Mid/High): 250/500/1,000 lumens.Runtime (Low/Mid/High): 12/8/3.5 hours.
DEWALT DCL183 Rechargeable LED Flashlight helps you to illuminate low-light work areas. It offers a main spotlight with 2 light settings and a side light with a single output.Focus on the task at hand and work hands-free by using the flashlight's strong magnet and hook. Its durable housing is IP54 rated for dust and water protection. Supplied with 1 x Type C USB Cable. Specifications: Spotlight Output (Low/High): 250/1,000 lumens.Side Light Output: 400 lumens.Light Beam Angle: Spotlight 15°, Side Light 90°.Runtime: Spotlight (Low/High) 6.5/2.5 hours, Side Light 6.5 hours.
The DEWALT DCLE34021 XR Compact Cross Line Green Laser is supplied with: 1 x 18V 2.0Ah L-ion Battery.1 x Laser Target Card.1 x Laser Bracket.1 x DCB107 Battery Charger.1 x Moulded Case.
DEWALT DCLE34031 Multi Line Laser with 3 x 360 degree laser lines to aid in full room layout. Its green beam diode ensures better beam visibility on the job site, even in brighter conditions. Over moulded housing protects the tool from harsh job site conditions. Fitted with a pendulum lock that helps prevent damage to internal components during transportation. It comes with a pivotable bracket, integrated magnets allow for safe sticking to metal studs. There is also a tripod attachment with mounting thread (1/4in & 5/8in), making this level the perfect all rounder for several applications. Specification: Laser Class: 2, Level Accuracy: ±0.3mm/mSelf-Levelling Range: 4 degreeVisibility: 40m (100m with Detector)Thread: 1/4in & 5/8in (integrated in Bracket)IP Rating: IP54Drop Test: 1mThe DEWALT DCLE34031D1 3 x 360 degree Multi Line Laser is supplied with: 1 x 18V 2.0Ah Li-ion Battery1 x Charger1 x Target Card1 x Bracket1 x Carry Case
DEWALT DCLE34031 Multi Line Laser with 3 x 360 degree laser lines to aid in full room layout. Its green beam diode ensures better beam visibility on the job site, even in brighter conditions. Over moulded housing protects the tool from harsh job site conditions. Fitted with a pendulum lock that helps prevent damage to internal components during transportation. It comes with a pivotable bracket, integrated magnets allow for safe sticking to metal studs. There is also a tripod attachment with mounting thread (1/4in & 5/8in), making this level the perfect all rounder for several applications. Specification: Laser Class: 2, Level Accuracy: ±0.3mm/mSelf-Levelling Range: 4 degreeVisibility: 40m (100m with Detector)Thread: 1/4in & 5/8in (integrated in Bracket)IP Rating: IP54Drop Test: 1mThe DEWALT DCLE34031N 3 x 360 degree Multi Line Laser comes in a carry case with a target card and a bracket. NO battery or charger supplied.
The DEWALT DCM200 XR Brushless Band File has been engineered for tough commercial applications, rotating up to 1,700 m/min. This power is controlled with a variable speed trigger and speed setting dial. A 173 degree pivoting arm enables the user to take full advantage of the portability and versatility and to access hard to reach spaces. With fully tool-free belt change and adjustments. There is also a powerful and directional LED work light. Supplied with: 1 x Side Handle, 1 x Standard 13mm Contact Arm, 1 x Offset13mm Contact Arm, 1 x Dust Extraction Attachment, 2 x 80G Sanding Belts, 2 x 18V 1.7Ah POWERSTACK Li-ion Batteries, 1 x Battery Charger and 1 x TSTAK Case. Specifications: No Load Speed: 600-1,700/m/min.Belt Size: 13 x 457mm.Weight: 1.3kg.
