The DEWALT Cordless Construction Trim Saw Blade has impact resistant carbide teeth that help to reduce the chance of chipping or breaking a tooth. The ultra sharp carbide teeth mean less force is required when pushing the blade through the timber. Its thin kerf blade design yields more cuts per charge, minimising battery drain, whilst the tripe triple action sharpening process grinds the tip to a razor sharp edge providing a smooth finish. The fast, smooth cutting action and durable construction makes it ideal for demanding jobsite operations.This DEWALT Cordless Construction Trim Saw Blade has been designed for fast cutting in wood and will fit the DW935 and DW936 models. Specification: Blade Diameter: 136mmBore Size: 10mmTooth Count: 24Tooth Config: ATBKerf: 1.66mmPlate Thickness: 1.0mmHook Angle: +20°
The DEWALT Cordless Construction Trim Saw Blade has impact resistant carbide teeth that help to reduce the chance of chipping or breaking a tooth. The ultra sharp carbide teeth mean less force is required when pushing the blade through the timber. Its thin kerf blade design yields more cuts per charge, minimising battery drain, whilst the tripe triple action sharpening process grinds the tip to a razor sharp edge providing a smooth finish. The fast, smooth cutting action and durable construction makes it ideal for demanding jobsite operations.This DEWALT Cordless Construction Trim Saw Blade has been designed for fast cutting in wood and will fit the DW935 and DW936 models. Specification: Blade Diameter: 165mmBlade Bore: 20mmTooth Count: 24Plate Thickness: 1.0mmKerf Thickness: 1.65mmGrind Type: ATBRake Angle: +24°
This DEWALT Cordless Construction Trim Saw Blade has been designed for general purpose cutting in wood. Specification: Blade Diameter: 165mmBlade Bore: 20mmTooth Count: 36Tooth Config: FTGKerf: 1.49mmPlate Thickness: 1.0mmHook Angle: +3°
The DEWALT Cordless Construction Trim Saw Blade has impact resistant carbide teeth that help to reduce the chance of chipping or breaking a tooth. The ultra sharp carbide teeth mean less force is required when pushing the blade through the timber. Its thin kerf blade design yields more cuts per charge, minimising battery drain, whilst the tripe triple action sharpening process grinds the tip to a razor sharp edge providing a smooth finish. The fast, smooth cutting action and durable construction makes it ideal for demanding jobsite operations.This DEWALT Cordless Construction Trim Saw Blade has been designed for fast cutting in wood and will fit the DW935 and DW936 models. Specification: Blade Diameter: 184mmBlade Bore: 20mmTooth Count: 24Tooth Config: ATBKerf: 1.79mmPlate Thickness: 1.13mmHook Angle: +18°
The DEWALT Cordless Extreme Framing Circular Saw Blade has a thin kerf (cutting width) to ensure that less push force is required by the user and that they cut straighter with reduced binding. The durable teeth stay sharp for a long time with reduced breakage. Suitable for ripping and cross-cutting natural timbers and cutting composite wood based sheet materials e.g. Plywood, MDF and chipboard. NOT recommended for timbers that contains nails.The DEWALT DT10624QZ Cordless Extreme Framing Circular Saw Blade has the following specifications: Blade Diameter: 165mm.Bore Size: 20mm.Tooth Count: 24.
The DEWALT Cordless Extreme Framing Circular Saw Blade has a thin kerf (cutting width) to ensure that less push force is required by the user and that they cut straighter with reduced binding. The durable teeth stay sharp for a long time with reduced breakage. Suitable for ripping and cross-cutting natural timbers and cutting composite wood based sheet materials e.g. Plywood, MDF and chipboard. NOT recommended for timbers that contains nails.The DEWALT DT10640QZ Cordless Extreme Framing Circular Saw Blade has the following specifications: Blade Diameter: 165mm.Bore Size: 20mm.Tooth Count: 40.
The DEWALT Cordless Mitre Saw Blades have been design for use with the DCS365 Cordless XPS Mitre Saw. The blades produce a higher quality cut with reduced tear-out and less vibration, increasing battery life. They also feature optimised grind angles and ultra sharp teeth with a new, thin plate design.This DEWALT Cordless Mitre Saw Blade has the following specification: Application: Plywood / Natural Wood / MDF.Finish: General Purpose.Blade Diameter: 184mm.Bore Size: 16mm.Tooth Count: 24.Kerf Thickness: 1.6mm.Plate Thickness: 1.0mm.Grind: ATB.Rake Angle: +7°.
The DEWALT Cordless Mitre Saw Blades have been design for use with the DCS365 Cordless XPS Mitre Saw. The blades produce a higher quality cut with reduced tear-out and less vibration, increasing battery life. They also feature optimised grind angles and ultra sharp teeth with a new, thin plate design.This DEWALT Cordless Mitre Saw Blade has the following specification: Application: Plywood / Natural Wood / MDF.Finish: Fine Finish.Blade Diameter: 184mm.Bore Size: 16mm.Tooth Count: 40.Kerf Thickness: 2.16mm.Plate Thickness: 1.0mm.Grind: ATB.Rake Angle: +7°.
The DEWALT Cordless Mitre Saw Blades have been design for use with the DCS365 Cordless XPS Mitre Saw. The blades produce a higher quality cut with reduced tear-out and less vibration, increasing battery life. They also feature optimised grind angles and ultra sharp teeth with a new, thin plate design.This DEWALT Cordless Mitre Saw Blade has the following specification: Application: Plywood / Natural Wood / MDF.Finish: Ultra Fine Finish.Blade Diameter: 184mm.Bore Size: 16mm.Tooth Count: 60.Kerf Thickness: 2.16mm.Plate Thickness: 1.0mm.Grind: ATB.Rake Angle: +7°.
The DEWALT Cutter Safety Trainers have a lightweight synthetic upper with a padded tongue and collar for added comfort. The comfort insole providing comfortable all day wear. They are fitted with a steel toecap that has been tested to 200 Joules and a phylon/rubber outsole with an anti-scuff toe guard. EN Test: CE EN ISO 20345-2011.Safety Rating: SB.Slip Rating: SRA.1 x Pair of DEWALT Cutter Safety Trainers Black UK 10 Euro 44
The DEWALT Cutter Safety Trainers have a lightweight synthetic upper with a padded tongue and collar for added comfort. The comfort insole providing comfortable all day wear. They are fitted with a steel toecap that has been tested to 200 Joules and a phylon/rubber outsole with an anti-scuff toe guard. EN Test: CE EN ISO 20345-2011.Safety Rating: SB.Slip Rating: SRA.1 x Pair of DEWALT Cutter Safety Trainers Black UK 11 Euro 45
The DEWALT Cutter Safety Trainers have a lightweight synthetic upper with a padded tongue and collar for added comfort. The comfort insole providing comfortable all day wear. They are fitted with a steel toecap that has been tested to 200 Joules and a phylon/rubber outsole with an anti-scuff toe guard. EN Test: CE EN ISO 20345-2011.Safety Rating: SB.Slip Rating: SRA.1 x Pair of DEWALT Cutter Safety Trainers Black UK 12 Euro 46
The DEWALT Cutter Safety Trainers have a lightweight synthetic upper with a padded tongue and collar for added comfort. The comfort insole providing comfortable all day wear. They are fitted with a steel toecap that has been tested to 200 Joules and a phylon/rubber outsole with an anti-scuff toe guard. EN Test: CE EN ISO 20345-2011.Safety Rating: SB.Slip Rating: SRA.1 x Pair of DEWALT Cutter Safety Trainers Black UK 6 Euro 39/40
The DEWALT Cutter Safety Trainers have a lightweight synthetic upper with a padded tongue and collar for added comfort. The comfort insole providing comfortable all day wear. They are fitted with a steel toecap that has been tested to 200 Joules and a phylon/rubber outsole with an anti-scuff toe guard. EN Test: CE EN ISO 20345-2011.Safety Rating: SB.Slip Rating: SRA.1 x Pair of DEWALT Cutter Safety Trainers Black UK 7 Euro 41
The DEWALT Cutter Safety Trainers have a lightweight synthetic upper with a padded tongue and collar for added comfort. The comfort insole providing comfortable all day wear. They are fitted with a steel toecap that has been tested to 200 Joules and a phylon/rubber outsole with an anti-scuff toe guard. EN Test: CE EN ISO 20345-2011.Safety Rating: SB.Slip Rating: SRA.1 x Pair of DEWALT Cutter Safety Trainers Black UK 8 Euro 42
The DEWALT Cutter Safety Trainers have a lightweight synthetic upper with a padded tongue and collar for added comfort. The comfort insole providing comfortable all day wear. They are fitted with a steel toecap that has been tested to 200 Joules and a phylon/rubber outsole with an anti-scuff toe guard. EN Test: CE EN ISO 20345-2011.Safety Rating: SB.Slip Rating: SRA.1 x Pair of DEWALT Cutter Safety Trainers Black UK 9 Euro 43
The DEWALT D024K 13mm Percussion Drill has been designed with low weight in mind to ensure the drill is easy to use and to help reduce user fatigue on long drilling applications. The compact design enables comfortable use and allows access to tight spaces. There is a sensitive soft trigger with variable speed switch which allows a user to drill slowly for precision accuracy when starting to drill a hole, while the rubber back handle increases comfort to the user in drilling and hammer drilling applications. The lock-on button gives the user the option to keep the machine continually running when doing repetitive operations. Suitable for drilling in concrete, masonry, steel, wood and fixings. Supplied with: 1 x Chuck Key, 1 x Multi-Position Side Handle, 1 x Depth Stop, 1 x Heavy-Duty Carrying Case and 1 x Instructions. Specification Chuck: 13mm Keyed, 1/2in-20 UNF.Input Power: 701 Watt.No Load Speed: 0-2,800/min.Impact Rate: 0-47,600/bpm.Capacity: Concrete: 16mm, Steel: 13mm, Wood: 25mm.Weight: 1.82kg.The DEWALT D024K 13mm Percussion Drill 110 Volt Version.
The DEWALT D024K 13mm Percussion Drill has been designed with low weight in mind to ensure the drill is easy to use and to help reduce user fatigue on long drilling applications. The compact design enables comfortable use and allows access to tight spaces. There is a sensitive soft trigger with variable speed switch which allows a user to drill slowly for precision accuracy when starting to drill a hole, while the rubber back handle increases comfort to the user in drilling and hammer drilling applications. The lock-on button gives the user the option to keep the machine continually running when doing repetitive operations. Suitable for drilling in concrete, masonry, steel, wood and fixings. Supplied with: 1 x Chuck Key, 1 x Multi-Position Side Handle, 1 x Depth Stop, 1 x Heavy-Duty Carrying Case and 1 x Instructions. Specification Chuck: 13mm Keyed, 1/2in-20 UNF.Input Power: 701 Watt.No Load Speed: 0-2,800/min.Impact Rate: 0-47,600/bpm.Capacity: Concrete: 16mm, Steel: 13mm, Wood: 25mm.Weight: 1.82kg.The DEWALT D024K 13mm Percussion Drill 240 Volt Version.
The DEWALT D21570K Dry Diamond Drill has a new motor which gives improved performance in applications with dry core bits up to 127mmn in bricks or soft masonry. The electronics provide e-clutch, power-up and overload protection and the two speed gearbox for increased versatility when drilling in wood, metal and concrete with standard drill bits. The electro-Mechanical clutch increases user control and protection and the heavy-duty 16mm steel chuck allows quick bit change whilst offering excellent bit retention. It has a innovative mode selection collar which allows intuitive control for optimal performance. Standard Equipment: Multi-Position side handle, Depth Stop, and Heavy-duty Carrying Case. Specification Chuck: 16mm Keyed Spindle Thread: 1/2in x 20 UNFInput Power: 1,300 Watt.Power Output: 680 Watt. No Load Speed: 0-1,250/0-3,500/min.Capacity: Core (Brick/Maonry): 127mmCollar Diameter: 43mm.Length 380mm.Height 215mm.Weight: 3.0kg.DEWALT D21570K Dry Diamond Drill 2 Speed 1300 Watt 127mm 110 Volt Version.
The DEWALT D21570K Dry Diamond Drill has a new motor which gives improved performance in applications with dry core bits up to 127mmn in bricks or soft masonry. The electronics provide e-clutch, power-up and overload protection and the two speed gearbox for increased versatility when drilling in wood, metal and concrete with standard drill bits. The electro-Mechanical clutch increases user control and protection and the heavy-duty 16mm steel chuck allows quick bit change whilst offering excellent bit retention. It has a innovative mode selection collar which allows intuitive control for optimal performance. Standard Equipment: Multi-Position side handle, Depth Stop, and Heavy-duty Carrying Case. Specification Chuck: 16mm Keyed Spindle Thread: 1/2in x 20 UNFInput Power: 1,300 Watt.Power Output: 680 Watt. No Load Speed: 0-1,250/0-3,500/min.Capacity: Core (Brick/Maonry): 127mmCollar Diameter: 43mm.Length 380mm.Height 215mm.Weight: 3.0kg.DEWALT D21570K Dry Diamond Drill 2 Speed 1300 Watt 127mm 240 Volt Version.
The DEWALT D24000 Wet Tile Saw with Slide Table is used for cutting tiles and a number of other building materials including ceramic, natural stone and composite material, interior and exterior tiles. The depth of a building tile cut with this saw ranges from 20mm to 60mm. Due to the fixed head and patented sliding bed, the D24000 is extremely easy to use. Whether rip, bevel or plunge cutting, the saw is quick and easy to adjust and extremely accurate. The stainless steel rail system is intergrated into the tile saw frame, ensuring accurate cuts. The cantilevering rail/cart sytem allows for 610mm ripping capacity and an intergrated 45/22.5° feature for quick angle cuts. There is a plunge feature that allows the user to make quick plunge cuts for electrical outlets and the dual water nozzles can be adjusted for optimal water placement on the blade in order to minimise over-spray and mist. Rear and side water attachments can be placed on the tile saw to catch overspray - keeping the water in the pan and a removeable cutting cart for easy cleaning of tile saw.The edge guide has two positions, 90 and 45°, allowing for easy line up of corner cuts. Supplied with: 1 x Side Table, 1 x Cutting Disc, 1 x Side and Rear Water Collector and 1 x Hex Key. Specification Input Power: 1,600 Watt.No Load Speed: 4,200/min.Disc Size: 250mm. Max Depth of Cut: 95mm. Crosscut Capacity: @90°: 610mm, @45°: 450mm.Weight: 31.3kg.DEWALT D24000 Wet Tile Saw with Slide Table 1600 Watt 110 Volt Version.
The DEWALT D24000 Wet Tile Saw with Slide Table is used for cutting tiles and a number of other building materials including ceramic, natural stone and composite material, interior and exterior tiles. The depth of a building tile cut with this saw ranges from 20mm to 60mm. Due to the fixed head and patented sliding bed, the D24000 is extremely easy to use. Whether rip, bevel or plunge cutting, the saw is quick and easy to adjust and extremely accurate. The stainless steel rail system is intergrated into the tile saw frame, ensuring accurate cuts. The cantilevering rail/cart sytem allows for 610mm ripping capacity and an intergrated 45/22.5° feature for quick angle cuts. There is a plunge feature that allows the user to make quick plunge cuts for electrical outlets and the dual water nozzles can be adjusted for optimal water placement on the blade in order to minimise over-spray and mist. Rear and side water attachments can be placed on the tile saw to catch overspray - keeping the water in the pan and a removeable cutting cart for easy cleaning of tile saw.The edge guide has two positions, 90 and 45°, allowing for easy line up of corner cuts. Supplied with: 1 x Side Table, 1 x Cutting Disc, 1 x Side and Rear Water Collector and 1 x Hex Key. Specification Input Power: 1,600 Watt.No Load Speed: 4,200/min.Disc Size: 250mm. Max Depth of Cut: 95mm. Crosscut Capacity: @90°: 610mm, @45°: 450mm.Weight: 31.3kg.The DEWALT DEWD24000 Wet Tile Saw with Side Table 240 Volt Version.
The DEWALT D25033K SDS Plus 3 Mode Hammer Drill is ideal for drilling anchor and fixing holes into concrete and masonry from 4 to 22mm in diameter. It has a rotation-stop mode for light chiselling applications in brick, soft masonry and occasionally concrete. Its impact-stop mode is suitable for drilling in wood, steel, ceramic and screwdriving applications. The large hammer mechanism delivers high performance with low stress to the critical components, resulting in better durability. The drill has a mechanical clutch that eliminates sudden high-torque reaction, should the bit jam. It also features electronic variable speed for total control in any application. Its rounded ergonomic industrial design allows easy and comfortable handling in any application. Supplied with: 1 x Multi-Position Side Handle, 1 x Depth Stop and 1 x Heavy-Duty Carrying Case. Specification Mode: Rotary, SDS Hammer, Chisel Only.Input Power: 710 Watt. No Load Speed: 0-1,550/min. Impact Rate: 0-5,680/bpm, 2.0 Joules.Capacity: Wood: 30mm, Steel: 13mm, Concrete 22mm, Core: 50mm.Toolholder: SDS.Weight: 2.5kg.D25033K SDS Plus 3 Mode Hammer Drill 710 Watt 240 Volt Version.
The DEWALT D25033K SDS Plus 3 Mode Hammer Drill is ideal for drilling anchor and fixing holes into concrete and masonry from 4 to 22mm in diameter. It has a rotation-stop mode for light chiselling applications in brick, soft masonry and occasionally concrete. Its impact-stop mode is suitable for drilling in wood, steel, ceramic and screwdriving applications. The large hammer mechanism delivers high performance with low stress to the critical components, resulting in better durability. The drill has a mechanical clutch that eliminates sudden high-torque reaction, should the bit jam. It also features electronic variable speed for total control in any application. Its rounded ergonomic industrial design allows easy and comfortable handling in any application. Supplied with: 1 x Multi-Position Side Handle, 1 x Depth Stop and 1 x Heavy-Duty Carrying Case. Specification Mode: Rotary, SDS Hammer, Chisel Only.Input Power: 710 Watt. No Load Speed: 0-1,550/min. Impact Rate: 0-5,680/bpm, 2.0 Joules.Capacity: Wood: 30mm, Steel: 13mm, Concrete 22mm, Core: 50mm.Toolholder: SDS.Weight: 2.5kg.DEWALT D25033K SDS 3 Mode Hammer Drill 710 Watt 110 Volt Version.
The DEWALT D25133K SDS 3 Mode Hammer Drill is ideal for drilling anchor and fixing holes into concrete and masonry from 4 to 26mm in diameter. It has a rotation-stop mode for light chiselling applications in brick, soft masonry and occasionally concrete. It also features an impact-stop mode for drilling in wood, steel, ceramic and screwdriving applications. The drill has a mechanical clutch that eliminates sudden high-torque reaction, should the bit jam. It features electronic variable speed for total control in any application. The ergonomic rubber coated back handle and industrial design provides easy and comfortable handling in any application. Suitable for the following applications:Drilling holes in solid masonry, concrete and stone from 4 to 26mm in diameter to various fixing.Drilling through holes in masonry to house pipes and cables.Light chipping in brick or masonryTile removal from kitchens and bathrooms.Small channelling in brick.Mortar and plaster removal.Some drilling in wood and steel. Supplied with:1 x Multi-position rubber side handle1 x Depth stop1 x Heavy-duty carrying case. Specifications:Mode: Rotary, SDS Hammer, Chisel Only.Input Power: 800 Watt. No Load Speed: 0-1,500/min. Impact Rate: 0-5,550/bpm, 2.6 Joules.Capacity: Wood: 30mm, Steel: 13mm, Concrete 26mm, Core: 50mm.Toolholder: SDS-Plus.Weight: 2.3kg.DEWALT D25133K SDS Plus 3 Mode 26mm Hammer Drill 800 Watt 240 Volt Version.
The DEWALT D25133K SDS 3 Mode Hammer Drill is ideal for drilling anchor and fixing holes into concrete and masonry from 4 to 26mm in diameter. It has a rotation-stop mode for light chiselling applications in brick, soft masonry and occasionally concrete. It also features an impact-stop mode for drilling in wood, steel, ceramic and screwdriving applications. The drill has a mechanical clutch that eliminates sudden high-torque reaction, should the bit jam. It features electronic variable speed for total control in any application. The ergonomic rubber coated back handle and industrial design provides easy and comfortable handling in any application. Suitable for the following applications:Drilling holes in solid masonry, concrete and stone from 4 to 26mm in diameter to various fixing.Drilling through holes in masonry to house pipes and cables.Light chipping in brick or masonryTile removal from kitchens and bathrooms.Small channelling in brick.Mortar and plaster removal.Some drilling in wood and steel. Supplied with:1 x Multi-position rubber side handle1 x Depth stop1 x Heavy-duty carrying case. Specifications:Mode: Rotary, SDS Hammer, Chisel Only.Input Power: 800 Watt. No Load Speed: 0-1,500/min. Impact Rate: 0-5,550/bpm, 2.6 Joules.Capacity: Wood: 30mm, Steel: 13mm, Concrete 26mm, Core: 50mm.Toolholder: SDS-Plus.Weight: 2.3kg.DEWALT D25133KL SDS Plus 3 Mode Hammer Drill 800 Watt 110 Volt Version.
The DEWALT D25134K SDS 3-Mode Hammer is ideal for drilling anchor and fixing holes into concrete and masonry from 4 to 26mm in diameter. It has a rotation-stop mode for light chiselling applications in brick, soft masonry and occasionally concrete. Its impact-stop mode is suitable for drilling in wood, steel, ceramic and screwdriving applications. The large hammer mechanism delivers high performance with low stress to the critical components resulting in better durability. The D25134K Hammer comes with a quick-change removable chuck for drilling in wood, steel and ceramic and for screwdriving applications. It has a mechanical clutch which eliminates sudden high-torque reaction, should the bit jam. The electronic variable speed provides total control in any application. The hammer has rubber coated back and side handles for improved comfort in use. Its rounded ergonomic industrial design allows easy and comfortable handling in any application. Supplied with: 1 x Quick Change 13mm Keyless Chuck, 1 x Multi-Position Rubber Side Handle, 1 x Depth Stop and 1 x Heavy-Duty Carrying Case. Specification Mode: Rotary, SDS Hammer, Chisel Only.Input Power: 800 Watt. No Load Speed: 0-1,500/min. Impact Rate: 0-5,540/bpm, 2.8 Joules.Capacity: Wood: 30mm, Steel: 13mm, Concrete 26mm,Core: 65mm.Toolholder: SDS Plus.Weight: 3.0kg.DEWALT D25134K SDS Plus 3 Mode QCC Hammer Drill 800 Watt 240 Volt Version.
The DEWALT D25134K SDS 3-Mode Hammer is ideal for drilling anchor and fixing holes into concrete and masonry from 4 to 26mm in diameter. It has a rotation-stop mode for light chiselling applications in brick, soft masonry and occasionally concrete. Its impact-stop mode is suitable for drilling in wood, steel, ceramic and screwdriving applications. The large hammer mechanism delivers high performance with low stress to the critical components resulting in better durability. The D25134K Hammer comes with a quick-change removable chuck for drilling in wood, steel and ceramic and for screwdriving applications. It has a mechanical clutch which eliminates sudden high-torque reaction, should the bit jam. The electronic variable speed provides total control in any application. The hammer has rubber coated back and side handles for improved comfort in use. Its rounded ergonomic industrial design allows easy and comfortable handling in any application. Supplied with: 1 x Quick Change 13mm Keyless Chuck, 1 x Multi-Position Rubber Side Handle, 1 x Depth Stop and 1 x Heavy-Duty Carrying Case. Specification Mode: Rotary, SDS Hammer, Chisel Only.Input Power: 800 Watt. No Load Speed: 0-1,500/min. Impact Rate: 0-5,540/bpm, 2.8 Joules.Capacity: Wood: 30mm, Steel: 13mm, Concrete 26mm,Core: 65mm.Toolholder: SDS Plus.Weight: 3.0kg.DEWALT D25134KL SDS Plus 3 Mode QCC Hammer Drill 800 Watt 110 Volt Version.
The DEWALT D25303DH Cordless Dust Extraction System is ideal for dust free drilling up to 16mm in diameter and is powered by an independent motor maintaining maximum hammer performance with no decrease in durability. The extractor continues to operate for two seconds after the hammer trigger is released to ensure any debris in the telescope or hose is completely removed. The high quality washable HEPA filter is capable of achieving 99.5% efficiency with dust particles as small as 0.3 microns. Maximum extraction is maintained at all times regardless of the hammer speed. It has a compact and low weight design that offers excellent comfort and near perfect balance. It also has a quick release for easy tool free assembly. Applications: - Completely cordless solution ensures this system can be used anywhere.- Preventing dust contamination in environments such as houses, offices and hospitals.- Drilling close to dust sensitive equipment.- Minimising job site clean-up.- To protect the operators eyes when drilling overhead. Bare Unit, No Battery or Charger Supplied. Specification Fits: DCH273, DCH274Max. Drill Bit Diameter: 16mmMax. Drill Bit Length: 160mmMax. Drilling Depth: 125mmWeight: 1.4kg
The DEWALT D25417KT SDS Plus Combination Hammer is fitted with a 3-mode selector dial: hammer and rotary, rotary only, hammer only, making it ideal for various jobsite applications. It has a rotation stop mode for light chiselling applications in brick, soft masonry and concrete. Perform & Protect delivers minimal vibration at 8.2m/s², reducing user fatigue during extended operating periods. An anti-rotation system detects a loss of tool control and reacts by instantly cutting the power for enhanced safety. The drill is ideal for drilling anchors and fixing holes into concrete, brick and masonry. Supplied with: 1 x Quick-Change 3 Jawed Chuck, 1 x Pair of Gloves, 1 x Pair of Safety Glasses, 15 x Drill Bits & Chisels and 1 x TSTAK Box. Specification: Mode: Hammer & Rotary, Rotary Only, Hammer Only Input Power: 1,000WNo Load Speed: 0-820/min.Impact Rate: 4,700/bpm with 4.2 joulesCapacity: Concrete: 6-32mmWeight: 4kgD25417KT 4kg SDS Plus Combination Hammer 110V Version
The DEWALT D25601K SDS-Max Combination Hammer is ideal for drilling anchor fixing and through holes in concrete and masonry. Its chain drive improves durability and increases efficiency together with an oil filled gearbox to ensure total component lubrication and superior heat dissipation and its ergonomic, compact and slim line design maximises control and offers easy access to confined spaces. Incorporates Active Vibration Control system with a floating rear handle and damped side handle to reduce vibration plus a rotation-stop facility for medium-light demolition applications. Its unique dust sealing protection to prevent even the finest dust ingress into the hammer mechanism delivering high durability and extended tool life and the hammer mechanism is optimised by reducing the number of components and by improving dampening to deliver maximum impact energy and therefore the efficiency to drill into the hardest concrete. The efficient mechanism delivers impact blows directly to the bit without losses through excessive vibration and rebound dampening reduces stress to the tool and the electronic variable impact energy/speed for total control with smaller bits and light material with the lock-on switch for greater control when in chipping mode. Excellent power to weight ratio: 12 Joules of impact energy delivered by a 6.8 kg hammer. Supplied with: 1 x Multi-Position Side Handle with Depth Stop, 1 x Heavy-Duty Carrying Case. Specification Modes: Rotary, SDS Hammer. Input Power: 1,250 Watt.No Load Speed: 210-415/Min.Impact Rate: 1,430/2,840/bpm, 2.8 Joules.Capacity: Concrete: 45mm, Core: 110mm. Weight: 6.8kg.Tool Holder: SDS-Max. Length: 477mm,Height: 245mm,Width: 104mm. Weight 6.8kg.DEWALT D25601K SDS Max Combi Hammer 6kg 1250 Watt 110 Volt Version.
The DEWALT D25810K SDS Max Chipping Combination Hammer has a powerful brushed motor for high performance even in demanding applications. Low vibration ensures maximum trigger time and also reduces user fatigue. Fitted with a soft, rubber anti-vibration handle. It has an ergonomic, compact and slim design which offers easy access to confined spaces. There's a chisel angle option which is easy to activate and use. Specification Modes: Hammer/Chisel.Input Power: 1050 Watt.Impact Rate: 3,150/bpm, 7.1 Joules.Weight: 5.6kg.1 x DEWALT D25810K SDS Max Chipping Combination Hammer 110 Volt Version.
The DEWALT D25899K SDS Max Demolition Hammer (10kg class) is a powerful yet lightweight Breaker with in-line design for better handling and quick-change chisel adjustment for fast orientation of the chisel through 12 preset positions. The large oversize hammer mechanism delivers extreme durability and excellent concrete breaking performance. Its ergonomic inline design ensures user comfort during any application. Whilst its compact, streamlined design allows access in confined areas. In line design for better handling and quick change chisel adjustment allows fast orientation of the chisel through 12 preset positions Modular design allows for quick access to key components allowing for faster and cheaper servicing. 1500 Watt, 95 mm motor delivers outstanding motor efficiency and durability, magnesium housings ensure maximum durability and minimum weight. Multi adjustable side handle can be located anywhere on the hammer barrel, maintaining user comfort in any application. Supplied with: 1 x Multi Position Side Handle and 1 x Heavy-Duty Carrying Case. Specification Input Power: 1,500 Watt.Impact Rate: 1,020-2,040/bpm, 17.5 Joules.Chuck: SDS Max.Length: 650mm.Height 250mm. Weight 9.6kg.DEWALT D25899K SDS Max Demolition Hammer 1500 Watt 110 Volt Version.
The DEWALT D25899K SDS Max Demolition Hammer (10kg class) is a powerful yet lightweight Breaker with in-line design for better handling and quick-change chisel adjustment for fast orientation of the chisel through 12 preset positions. The large oversize hammer mechanism delivers extreme durability and excellent concrete breaking performance. Its ergonomic inline design ensures user comfort during any application. Whilst its compact, streamlined design allows access in confined areas. In line design for better handling and quick change chisel adjustment allows fast orientation of the chisel through 12 preset positions Modular design allows for quick access to key components allowing for faster and cheaper servicing. 1500 Watt, 95 mm motor delivers outstanding motor efficiency and durability, magnesium housings ensure maximum durability and minimum weight. Multi adjustable side handle can be located anywhere on the hammer barrel, maintaining user comfort in any application. Supplied with: 1 x Multi Position Side Handle and 1 x Heavy-Duty Carrying Case. Specification Input Power: 1,500 Watt.Impact Rate: 1,020-2,040/bpm, 17.5 Joules.Chuck: SDS Max.Length: 650mm.Height 250mm. Weight 9.6kg.DEWALT D25899K SDS Max Demolition Hammer 1500 Watt 240 Volt Version.
