A single ended triangular saw file, single cut. For general saw sharpening and for sharpening dovetail and other fine toothed saws.Size 100mm (4in)Side 3/16inTanged
A single ended triangular saw file, single cut. For general saw sharpening and for sharpening dovetail and other fine toothed saws.Size 150mm (6in)Side 9/32inTanged
For filing all types of handsaws with 60° angle teeth.Straight set edges for filing gullets between saw teeth.Single cut.Tanged Size 100mm (4in)Side 11/32in.
For filing all types of handsaws with 60° angle teeth.Straight set edges for filing gullets between saw teeth.Single Cut. Size 150mm (6in)Side 15/32in.Tanged
For filing all types of handsaws with 60° angle teeth.Straight set edges for filing gullets between saw teeth.Single Cut.Size 200mm (8in)Side 19/32inTanged.
For locksmithing work in wards or notches of keys and for reaching into narrow places. Double cut on sides, single cut on edges.Size 150mm (6in)Cut warding smooth Tanged.
Crescent® Tongue & Groove Joint Multi Pliers can be used on a variety of shapes including rods, pipes, hose and cable connection devices. The unique angled tooth pattern provides better grip and the precision undercut grooves and rib offer positive interlock. Made from forged alloy steel construction for maximum durability with a hardened pivot joint for smooth operation. RT27CVN: 4 Adjustments, 28mm CapacityRT210CVN: 5 Adjustments, 38mm CapacityRT212CVN: 8 Adjustments, 64mm CapacityRT216CVN: 8 Adjustments, 114mm CapacityThese Crescent® Tongue & Groove Joint Multi Pliers have the following specification: Type: Straight JawOverall Length: 250mm (10in)Jaw Opening: 38mm
Crescent® Tongue & Groove Joint Multi Pliers can be used on a variety of shapes including rods, pipes, hose and cable connection devices. The unique angled tooth pattern provides better grip and the precision undercut grooves and rib offer positive interlock. Made from forged alloy steel construction for maximum durability with a hardened pivot joint for smooth operation. RT27CVN: 4 Adjustments, 28mm CapacityRT210CVN: 5 Adjustments, 38mm CapacityRT212CVN: 8 Adjustments, 64mm CapacityRT216CVN: 8 Adjustments, 114mm CapacityThese Crescent® Tongue & Groove Joint Multi Pliers have the following specification: Type: Straight JawOverall Length: 180mm (7in)Jaw Opening: 28mm
The Wiss Auto-Retracting Safety Utility Knife has a ergonomic design with a quick blade change system for ease of use. The blade retracts automatically the moment it loses contact with the material being cut, even if the user is still holding the blade slider forward in the 'open’ position. This helps reduce workplace injuries, lowering lost time and increasing productivity Accepts all standard type utility knife blades and includes 3 black coated blades.
The Wiss Easysnip Utility Shears are perfect for workshop, garden and craft projects. It is fitted with spring loaded, bi-material handles for ease of use, especially with repeated cuts. There is a wire cutter notch to hold light gauge wire and a side lock for safe storage when not in use. Size: 216mm (8.1/2in).
The Wiss M-1R Metalmaster® Compound Snips Left Hand/Straight Cutting have self opening, non-slip, serrated jaws for rapid cutting. They are made from hot drop forged molybdenum steel and are fitted with comfortable colour coded vinyl grips. Can cut straight or left hand. Specification Size: 248mm (9.3/4in).Capacity: Low Carbon Steel: 18 Gauge/1.22mm.These Wiss Metalmaster® Compound Snips have the following specification: Cutting Type: Left Hand/Straight Cut.Size: 248mm (9.3/4in).Capacity: Low Carbon Steel: 18 Gauge/1.22mm.
The Wiss M-2R Metalmaster® Compound Snips have self opening, non-slip, serrated jaws for rapid cutting. They are made from hot drop forged molybdenum steel with comfortable colour coded vinyl grips (green right hand/straight). They have compound lever action handles that are suitable for heavy stock, even when cutting tight curves. Cuts right from tight curves to straight up to 1.2mm mild steel. The snips have a convenient, protective safety latch. Specification Size: 248mm (9.3/4in).Capacity: Low Carbon Steel: 18 Gauge/1.22mm.These Wiss Metalmaster® Compound Snips have the following specification: Cutting Type: Right Hand/Straight Cut.Size: 248mm (9.3/4in).Capacity: Low Carbon Steel: 18 Gauge/1.22mm.
The Wiss M-3R Metalmaster Compound Snips have a self-opening, non-slip, serrated jaws for rapid cutting. They are hot drop forged from special molybdenum steel with comfortable colour coded, yellow vinyl grips. The snips are fitted with compound lever action handles that are light and easy to handle, even when cutting tight curves. There is also a convenient protective safety latch. Cuts straight (or wide curves left or right in light stock) up to 1.2 mm mild steel. Size: 248mm (9.3/4in).These Wiss Metalmaster Compound Snips have the following specification: Cutting Type: Straight Cut/Curves.Size: 248mm (9.3/4in).Capacity: Low Carbon Steel: 18 Gauge/1.22mm. Supplied with a holster.
The Wiss M-6R Metalmaster® Compound Snip has offset blades to keep the material away from hands, allowing straight and circle cuts to be made easily. Will cut up to 1.2mm thick mild steel. Red vinyl grips. Cut left and straight. Specification Size: 235mm (9.1/4in).Blade Length: 32mm (1.1/4in).Capacity: Low Carbon Steel: 18 ;Gauge/1.22mm.
The Wiss M-7R Metalmaster® Compound Snips have offset blades, to keep the material away from hands, allowing straight or circle cuts to be made easily. Will cut up to 1.2mm thick mild steel. Green vinyl grips. Cuts right and straight. Specification Size: 235mm (9.1/4in).Blade Length: 32mm (1.1/4in).Capacity: Low Carbon Steel: 18 Gauge/1.22mm.
The Wiss Folding Pocket Knife has a Titanium coated stainless steel blade, Titanium coating is 3X harder than steel providing a longer working life. The blade features a piercing tip with serrated and straight cutting edges for maximum cutting abilities. With a full metal frame for increase durability and a slim, ergonomic handle for maximum comfort. Dual thumb studs and thumb hole provide quick and easy opening of the knife. It is also fitted with a reversible belt clip.
The Crescent X6™ Metric Open End Ratcheting Spanners have a smooth profile that allows for more torque to be comfortably applied to the fastener. With a ratcheting open end that turns nuts and bolts without removing spanner from fastener. They fit 6 fastener types: Hex, Square, 12 Pt., E-Torx®, Rounded Hex, and Spline. Includes one of each size: 8, 10, 12, 13, 14, 15 & 17mm.
The Crescent X6™ Pass-Thru™ Adjustable Wrench is a versatile fastening tool that offers multiple fastening options in a single tool design. The traditional 200mm (8in) adjustable wrench has laser etched SAE/MM scales and wide jaw opening. With a Pass-Thru™ reversible ratcheting system that works over long threaded rod, where normal ratchets and sockets won’t fit. For pipe work, the jaw reverses. Simply back the jaw out, turn it around and re-insert. Serrations on the inside edge form a deep tooth pattern that hold pipe tight and reduce slipping. Every pass-thru socket replaces one standard and one deep socket. The universal design allows it to fit 6 fastener types: Hex, Square, 12 Pt., E-Torx®, Rounded Hex and Spline. Sockets are clearly marked for easy identification and have a corrosion resistant black-phosphate finish. Includes 10 Universal Combo Sockets that fit both standard and metric fasteners: 3/8in (10mm), 7/16in (11mm), 15/32in (12mm), 1/2in (13mm), 9/16in (14mm), 19/32in (15mm), 5/8in (16mm), 11/16in (17mm), 23/32in (18mm) and 3/4in (19mm).
The Crescent X6™ Ratcheting Metric Spanners have a 5° ratcheting arc that provides greater access to fasteners. With innovative stepped box ends for easy access and clearance. The smooth profile allows for more torque to be comfortably applied to the fastener. They fit 6 fastener types: Hex, Square, 12 Pt., E-Torx®, Rounded Hex, and Spline. Each spanner covers 4 sizes: 8, 10, 12 and 13mm on one and 14, 15, 17 and 19mm on the other, a total of 8 sizes in just 2 spanner.
A clear, low odour wood treatment to prevent insect attack, re-infestation. The water based formula will also protect from fungal decay and will take 1-3 days to dry.
1L
Cuprinol Anti Slip Decking Stain with invisible anti-slip microbeads gives a semi-transparent matt finish specially formulated for all types of timber decking. It provides both colour and a tough durable protective coat that resists cracking and peeling. It is water repellent to help prevent wood cracking and splitting and it is showerproof in less than an hour. Also suitable for use on other garden wood and is safe for plants and pets when dry. It has an average coverage of approx 20m² with 2 coatsCuprinol Anti Slip Decking Stain Colour: American MahoganySize: 2.5 Litres.
