Bostitch CPACK30 is a fully assembled air line hose on a swivelling hose reel, supplied with 6.3mm FPT (female pipe thread) plug and a 6.3mm FPT (female pipe thread) socket. Length: 12.5mm hose x 30 metres.PS Max: 15 Bar, 214psi.
The Bostitch F21PL-E Roundhead & MCN Stick Nailer has a waisted body design to improve sightline and a repositioned handle to give balance and comfort in use. Using 21° plastic collated framing nails hot dip galvanized to 50 microns and specially designed positive placement nails. This tool is perfect for all framing and first fix applications where good corrosion resistance is required and of course anywhere you need to drive a nail through a pre formed hole. Comes complete with two noses, enabling a five second change between modes via the push button depth control button. Perfect for all framing and first fix applications. Specification Magazine Capacity: 50 (max).Nail Length: PL Series: 45-90mm, MCN Series: 38-65mm.Nail Diameter: PL Series: 2.5-3.3, MCN Series: 4-4.1mm.Operating Pressure: 70-120 PSI, 5-8.25 Bar.Collation Angle: 21°.Weight: 3.7kg.
This latest evolution of the best selling N88WW framer brings even more power to job with a 5% increase in driving power together with a weight reduction. The waisted body design gives a much improved sightline to the tool nose. The handle has been lowered to improve balance and comfort in use; along with other design improvements these features will keep this tool firmly at no 1 in the pneumatic framing market. Its use of 28 degree wire collated nails keeps consumable costs to a minimum. Use for all your framing and first fix applications. Specification Magazine Capacity: 90 (max).Nail Range: 50-90mm First Fix NailsOperating Pressure: 70-120 PSI, 4.8-8.3 Bar.Driving Power: 1050 inch/lbs.Weight: 3.5kg.
The Bostitch F33PTSM-E framing nailer features a short magazine for ease of use in tight spaces and has a Dial a Depth function. The paper tape nails are compatible with pazlode (IM350) framer. The powerful engine is capable of driving stick nails upto 90mm in length, whilst the lightweight magnesium body makes it comfortable to use all day long. It has CE compliant sequential trip fitted, for safer working on-site, a No-mar tip to prevent wood bruising and an adjustable exhaust to direct air away from workpiece and operator. Ideal for: Cases, Roof Trusses, Stud Walls and Timber Framing. Uses PT Fastner range. Specification Magazine Capacity: 50 (max).Nail Length: PT Series/WW 33º Series: 50-90mm Nails.Nail Diameter: PT Series/WW 33º Series: 2.5-3.3mm.Operating Pressure: 70-120 PSI, 4.8-8.3 Bar.Collation Angle: 33°.Weight: 3.5kg.
The Bostitch 16 gauge FN1664-E finish nailer represents great value for money with the design incorporating class leading features. The FN1664-E has a light weight magnesium construction body, no-nail lockout, rear exhaust and selectable trigger without compromising the high durability and build quality that has made Stanley Bostitch the market leader in performance pneumatic tools for construction. Comes complete with 1000 fasteners and heavy-duty carry case. Specification Magazine Capacity: 110 (max).Fires: SB16 Series: 25-64mm.Operating Pressure: 70-120 PSI, 4.8-8.3 Bar.Weight: 1.7kg.
Designed for high volume operation, coils contain large quantities of nails meaning that reloading down time can be kept to a minimum. You will find them in the pallet and crate, fencing, garden furniture and the construction industries. All Coil Nails are Round Head nails. Typically: Coils of nails with diameters from 2.0 mm to 2.2 mm contain 350 nails. Coils of nails with diameters from 2.5 mm to 3.1 mm. Contain 225 nails. Roofing nail coils contain 120 nails, due to the extra large diameter of the head. 15° Collation angle Ring shank nails have a series of rings punched into the surface of the shank. A difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails. For use with: N57C-1CE heavy-duty Coil Nailer N58C-1-E Coil Nailer N58C-1-E Coil Nailer N66C-2-E Coil NailerFinish: Galvanised.Size: 2.1 x 40mm.Box quantity: 24,500.
Designed for high volume operation, coils contain large quantities of nails meaning that reloading down time can be kept to a minimum. You will find them in the pallet and crate, fencing, garden furniture and the construction industries. All Coil Nails are Round Head nails. Typically: Coils of nails with diameters from 2.0 mm to 2.2 mm contain 350 nails. Coils of nails with diameters from 2.5 mm to 3.1 mm. Contain 225 nails. Roofing nail coils contain 120 nails, due to the extra large diameter of the head. 15° Collation angle Ring shank nails have a series of rings punched into the surface of the shank. A difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails. For use with: N57C-1CE heavy-duty Coil Nailer N58C-1-E Coil Nailer N58C-1-E Coil Nailer N66C-2-E Coil NailerFinish: Galvanised.Size: 2.3 x 50mm.Boz quantity: 13,200.
Designed for high volume operation, coils contain large quantities of nails meaning that reloading down time can be kept to a minimum. You will find them in the pallet and crate, fencing, garden furniture and the construction industries. All Coil Nails are Round Head nails. Typically: Coils of nails with diameters from 2.0 mm to 2.2 mm contain 350 nails. Coils of nails with diameters from 2.5 mm to 3.1 mm. Contain 225 nails. Roofing nail coils contain 120 nails, due to the extra large diameter of the head. 15° Collation angle Ring shank nails have a series of rings punched into the surface of the shank. A difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails. For use with: N57C-1CE heavy-duty Coil Nailer N58C-1-E Coil Nailer N58C-1-E Coil Nailer N66C-2-E Coil NailerFinish: Galvanised.Size: 2.3 x 55mm.Box quantity: 13,200.
Bostitch FAC Series Flat Angle Coil Pattern Ring Coil Nails are designed for high volume operation. The coils contain large quantities of nails meaning that reloading down time can be kept to a minimum. You will find them used in the pallet and crate, fencing, garden furniture and the construction industries. To Suit: N71C-1-E, N75C-2-E, N80CB-1ML, N89C-1P-E, N89C-2K-E All Coil Nails are Round Head nails. Typically: Coils of nails with diameters from 2.0 mm to 2.2 mm contain 350 nails. Coils of nails with diameters from 2.5 mm to 3.1 mm. Contain 225 nails. Roofing nail coils contain 120 nails, due to the extra large diameter of the head. 15° Collation Angle Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Finish: Galvanised.Size: 2.8 x 65mm.Box quantity: 7500.
Bostitch FAC Series Flat Angle Coil Pattern Ring Coil Nails are designed for high volume operation. The coils contain large quantities of nails meaning that reloading down time can be kept to a minimum. You will find them used in the pallet and crate, fencing, garden furniture and the construction industries. To Suit: N71C-1-E, N75C-2-E, N80CB-1ML, N89C-1P-E, N89C-2K-E All Coil Nails are Round Head nails. Typically: Coils of nails with diameters from 2.0 mm to 2.2 mm contain 350 nails. Coils of nails with diameters from 2.5 mm to 3.1 mm. Contain 225 nails. Roofing nail coils contain 120 nails, due to the extra large diameter of the head. 15° Collation Angle Bright finish is without any form of protection and is the most economical choice, but the nails will start to rust before nails that have a protective treatment. Used in applications where no protection is required, for example a one way disposal pallet. As all standard nails come with this finish. Galvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Galvanised protection is measured in Microns (each Micron is 0.000001 of an metre thick). The thicker the micron coating the better the protection level of the nails.Finish: Galvanised Ring Shank.Size: 3.1 x 90mm.Box quantity: 4,050.
High carbon Zinc Dichromate HCFN finish nail 15 gauge. For use with Bostitch concrete block nailer.20mmGauge/Diameter (mm) 15 GA Box 3000High Carbon Zinc Dichromate Suits: SB-HC50FN
High carbon Zinc Dichromate HCFN finish nail 15 gauge. For use with Bostitch concrete block nailer.40mmGauge/Diameter (mm) 15 GA Box 1500High Carbon Zinc Dichromate Suits: SB-HC50FN
High carbon Zinc Dichromate HCFN finish nail 15 gauge. For use with Bostitch concrete block nailer.50mmGauge/Diameter (mm) 15 GA Box 1500High Carbon Zinc Dichromate Suits: SB-HC50FN
Bostitch PT-MC Series Fasteners (PT-MC375SP38G) MCN Galvanised nails. This type of collation is ideal in construction environments where work can be kept free of collation debris. Diameter: 3.75mmHead: 7.2mmLength: 38mm Profile: TwistRing shank nails have a series of rings punched into the surface of the shank. Again a difference in the diameter of the shank is produced making it even more difficult to withdraw the nail. Finish : GalvanisedGalvanising, or coating with Zinc, is the best way to prevent nails from corroding. The zinc does not protect the steel of the nail, but is corroded first. The thicker the zinc coating, the longer it will be before the nail is attacked. The thickest coating is called hot dipped and is applied by dipping the nails into a bath of molten zinc. Collation angle: 33° Collation type: PapertapeBox of 4,000 Note: MCN nails are only for use with MCN Tip.
Galvanised ring nail anchor stick for use with N88RH-2MCN-E only when MCN is fitted. Galvanised to 15 microns.Ring shank with conical head which centres the nail in the pre-drilled hole. Gauge/Diameter (mm) 4 Length 38 21° Collation Angle Profile RING Finish G8 Description ANCHOR STICK 4 .00-38 RING GAL 2M Qty per box 2000 Fits F21PL-E For use with N88RH-2MCN-E only when MCN is fitted Note: MCN nails are only for use with MCN Tip.
The Bostitch MCN150-E Strap Shot Metal Connecting Nailer is incredibly lightweight and simple to use and maintain. Compact metal connecting nailer with Sequential Trip Trigger, adjustable exhaust. It is designed to allow access to even the tightest corners, and the innovative exposed-tip design positions the fastener directly into the connector plates holes for faster and more accurate positioning than ever before. The award winning StrapShot MCN150-E is the most advanced pneumatic positive placement nailer on the market. The compact StrapShot is designed to work where other nailerscan't, allowing access to even the tightest corners, and the innovative exposed-tip design positions the fastener directly into the connector plates holes for faster and more accurate positioning than ever before. Ideal for Joist Hangers, roof trusses, metal connectors and other manufacturing uses. This nail gun uses the 3.75 x 38 mm PT MCN Galvanised Nails. Specification Magazine Capacity: 29 (max).Nail Head: 7.2mm.Nail Length: 38mm. Nail Diameter: 3.3-3.8mm.Operating Pressure: 70-120 PSI, 4.1-8.4 Bar.Air Consumption Per Shot: 5.6 bar 1.9 Litre.Weight: 1.95kg.
The high capacity N66C-2-E coil nailer is designed with a tough, resilient housing but uses light weight materials, making this tool ideal for all day use. The fastener depth adjustment gives ultimate control, and the tool is also compatible with both plastic and wire collated nails for maximum flexibility. Specifciation Magazine Capacity: 225 (max).Nail Length: N Series: 32-64mm.Nail Diameter: N Series: 2.03-2.5mm.Nail Head: 4.5mm.Operating Pressure: 70-120 PSI, 4.8-8.3 Bar.Dimensions (LxWxH): 267 x 270 x 118mm.Weight: 1.99kg.
The Bostitch PN50-E Pneumatic Palm Nailer is a small impact palm nailer which is half the size of the old PN100. It can drive the most common bulk finish, framing and timber nails into confined areas and has an adjustable swivel connection. Specification Magazine Capacity: 1 (max). Fires: Bulk Series: Diameter: 8mm (max).Operating Pressure: 79-124 PSI, 5.5-8.6 Bar. Weight: 0.55kg.
Powerslam staples available in packs of 5,000, for use with the Powerslam Hand Tacker (BOSPC2K).Crown (mm) 10.0 Length 10 SKU STCR501910E Finish GALV Point CP Description STCR5019 STAPLE10MM GALV 5M Qty per box 5000
Powerslam staples available in packs of 5,000, for use with the Powerslam Hand Tacker (BOSPC2K).Crown (mm) 10.0 Length 12 SKU STCR501912E Finish GALV Point CP Description STCR5019 STAPLE 12MM GALV 5M Qty per box 5000
Powerslam staples available in packs of 5,000, for use with the Powerslam Hand Tacker (BOSPC2K).Crown (mm) 10.0 Length 6 SKU STCR501906E Finish GALV Point CP Description STCR5019 STAPLE 6MM GALV 5M Qty per box 5000
Powerslam staples available in packs of 5,000, for use with the Powerslam Hand Tacker (BOSPC2K).Crown (mm) 10.0 Length 8 SKU STCR501908E Finish GALV Point CP Description STCR5019 STAPLE 8MM GALV 5M Qty per box 5000
The SB-HC50FN Concrete Block Nailer is a 15 gauge Finish Nailer which is capable of driving high carbon zinc dichromate hardened nails into concrete blocks to 7 newtons. Designed to drive tungsten hardened nails into almost all forms of concrete block, the SB-HC50FN can fix door liners into block and gripper rods into floor screeds. It is not recommended that this tool is used to drive nails into any form of strengthened concrete or engineered and glazed bricks. Specification Magazine Capacity: 100 nails.Fires: HCFN Series: 20-50mm.Operating Pressure: 70-100 PSI, 5-7bar.Weight 1.98kg.
Finish Nails have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, Round or Clipped Heads. Primarily used for finish and trim work in the construction and joinery industries.A Bulk Pack of 2,500 32 mm 16 Gauge Straight Finish Nails for use with Stanley Bostitch Finish Nailers.Length : 32 mm.Pack : Box of 2500.
Finish Nails have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, Round or Clipped Heads. Primarily used for finish and trim work in the construction and joinery industries.A pack of 1000 32 mm 16 gauge Straight Finish nails. Length : 32 mm.Pack Size : Clam pack of 1000.
Finish Nails have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, Round or Clipped Heads. Primarily used for finish and trim work in the construction and joinery industries.A Bulk Pack of 2,500 38 mm 16 Gauge Straight Finish Nails for use with Stanley Bostitch Finish Nailers. Length : 38 mm.Pack : Box of 2500.
Finish Nails have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, Round or Clipped Heads. Primarily used for finish and trim work in the construction and joinery industries.A pack of 1000 38 mm 16 gauge Straight Finish nails. Length : 38 mm.Pack Size : Clam pack of 1000.
Finish Nails have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, Round or Clipped Heads. Primarily used for finish and trim work in the construction and joinery industries.A Bulk Pack of 2,500 44 mm 16 Gauge Straight Finish Nails for use with Stanley Bostitch Finish Nailers. Length : 44 mm.Pack : Box of 2500.
Finish Nails have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, Round or Clipped Heads. Primarily used for finish and trim work in the construction and joinery industries.A pack of 1000 45 mm 16 gauge Straight Finish nails. Length : 45 mm.Pack Size : Clam pack of 1000.
Finish Nails have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, Round or Clipped Heads. Primarily used for finish and trim work in the construction and joinery industries.A Bulk Pack of 2,500 50 mm 16 Gauge Straight Finish Nails for use with Stanley Bostitch Finish Nailers.Length : 50 mm.Pack : Box of 2500.
Finish Nails have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, Round or Clipped Heads. Primarily used for finish and trim work in the construction and joinery industries.A pack of 1000 50 mm 16 gauge Straight Finish nails. Length : 50 mm.Pack Size : Clam pack of 1000.
Finish Nails have heads that are rectangular. They are the same width as the shank, but the breadth of them is greater than the shank. This ensures that their holding power is enhanced, but of course the pull through force is lower than for nails with larger, Round or Clipped Heads. Primarily used for finish and trim work in the construction and joinery industries.A Bulk Pack of 2,500 56 mm 16 Gauge Straight Finish Nails for use with Stanley Bostitch Finish Nailers.Length : 56 mm.Pack : Box of 2500.
