Everbuild Resiblock Superior Original is a tough, solvent based, long-lasting coating that ensures there is no loss of jointing sand from pressure washing, weathering or trafficking. It also prevents weed and grass growth as well as food and drink stains. Resiblock Superior Original can be used on either new or old paving to enhance the look and is ideal for use on concrete block paving.Specifications: Finish: Natural.SIze: 5 litres.
Everbuild Resiblock Superior Original is a tough, solvent based, long-lasting coating that ensures there is no loss of jointing sand from pressure washing, weathering or trafficking. It also prevents weed and grass growth as well as food and drink stains. Resiblock Superior Original can be used on either new or old paving to enhance the look and is ideal for use on concrete block paving.Specifications: Finish: Gloss.Size: 5 litres.
Everbuild Resiblock Indian Sandstone Sealer Colour Enhancer restores the stone and helps to bring out its natural colours, providing long term resistance against staining and algae growth. It is long-lasting - up to 5 years. Application can be done in one simple coat. It is suitable for use on most forms of natural stone.
Everbuild PVA Bond is a medium viscosity, polyvinyl alcohol stabilised, externally plasticised, vinyl acetate homopolymer. Contains no harmful phthalates.It has been designed specifically for use in the building industry as a general purpose bonding agent, and additive for concrete and plasters and as a multi-use adhesive. BENEFITS - Greatly improved adhesion to a wide range of substrates including dense concrete, glass, steel, tiles etc.- Mixes may be applied in much thinner sections to salt permeation- Reduces surface dusting of concrete- Improved flexibility of sand cement products- Reduced water:cement ratio for equivalent workability- Improved frost resistance- Reduces surface porosity of mortar/plaster AREAS FOR USE- As with general purpose adhesive for wood, cork, paper, textiles etc- As an admixture for mortar/screeds/renders- As a bonding agent for screeds/renders to difficult substrates- As a primer/sealer in tiling applications- As an internal filler when mixed with wood shavings, plaster etc.Size: 500ml.
Powder Mortar Tone is formulated from best quality oxide pigments for permanently colouring all types of mortars, rendering, concrete and pointing. The pigments disperse easily into the mix to give a uniform shade for each mix batch. Shading can be adjusted to provide a wider variety of colour depths. Permanently colours cement based products - light fast pigments will not fade.Improves workability/trowelability - contains a plasticizer.Chloride free (chloride ion content < 0.1%).Reduces bleeding/segregation.Inhibits efflorescence.
Powder Mortar Tone is formulated from best quality oxide pigments for permanently colouring all types of mortars, rendering, concrete and pointing. The pigments disperse easily into the mix to give a uniform shade for each mix batch. Shading can be adjusted to provide a wider variety of colour depths. Permanently colours cement based products - light fast pigments will not fade.Improves workability/trowelability - contains a plasticizer.Chloride free (chloride ion content < 0.1%).Reduces bleeding/segregation.Inhibits efflorescence.
Powder Mortar Tone is formulated from best quality oxide pigments for permanently colouring all types of mortars, rendering, concrete and pointing. The pigments disperse easily into the mix to give a uniform shade for each mix batch. Shading can be adjusted to provide a wider variety of colour depths. Permanently colours cement based products - light fast pigments will not fade.Improves workability/trowelability - contains a plasticizer.Chloride free (chloride ion content < 0.1%).Reduces bleeding/segregation.Inhibits efflorescence.
Powder Mortar Tone is formulated from best quality oxide pigments for permanently colouring all types of mortars, rendering, concrete and pointing. The pigments disperse easily into the mix to give a uniform shade for each mix batch. Shading can be adjusted to provide a wider variety of colour depths. Permanently colours cement based products - light fast pigments will not fade.Improves workability/trowelability - contains a plasticizer.Chloride free (chloride ion content < 0.1%).Reduces bleeding/segregation.Inhibits efflorescence.
Plumbers Putty is a ready mixed, waterproof, non-setting putty designed for sealing and bedding w/c soil pipes, joints in sanitaryware, sinks and waste water fittings. Plumbers Putty will seal ceramics, vitreous enamels, metals and PVC. Plumbers Putty remains permanently flexible to allow for joint movement, is overpaintable and is compatible with Everflex Silicone Sealants.
PINKGRIP DRY FIX is a revolutionary new type of fast curing, adhesive foam that has been specially developed for the rapid installation of Plasterboard, Insulation Boards and other sheet materials such as Roof Decking and Floorboards. PINKGRIP DRY FIX provides significant labour saving and convenience benefits when compared to traditional dry wall adhesives. It will bond to most common building substrates; can be applied horizontally or vertically to boards, walls or battens/beams. The foam expands very minimally on application but enough to fill any gaps on uneven surfaces. PINKGRIP DRY FIX can be applied using an Everbuild Dry Fix Applicator Gun.
Mammoth Powerful Grip Tape is a polyester fabric reinforced double-sided tape with a powerful synthetic rubber/resin adhesive designed for bonding almost any material to themselves or each other. Powerfu lGrip tape has an extremely high bond strength, can be used indoor and outdoor and is totally weatherproof when applied. BENEFITS:- Will stick to ceramics, wood, glass, plastics, brickwork, PVC etc.- Weatherproof.- Strong initial bond strength.- Will stick to porous and non-porous surfaces.This Everbuild Powerfulgrip Double Sided Tape comes in the following: Size: 12mm x 2.5m.
The Everbuild Opti-Mix Cement Colourant is a one-shot cement colourant that enables accurate colour matching and consistency between different batches of mortar. Fast colouring formulation. Easy-to-use, controlled dosage which is less messy than powder. 1 litre is equivalent to 5 litres of standard product.
Sika®Multi Stick MS is an exciting new grab adhesive based on new SPUR technology (Silyl-terminated PUR technology). This superior adhesive has the ability to bond virtually anything to everything in both wet and dry conditions, and even underwater or in the rain. With incredible initial grab, high bonding strength, and almost limitless applications and other benefits, no tradesman should be without a tube of this next generation adhesive. Capable of bonding to almost all materials, porous and non-porous, such as: Glass, Marble, Granite, Mirrors, Bricks, Stone, Plasterboard, Concrete, All Metals, All Hard Plastics, Ceramics, Fibreglass, Timber and much, much more. Including applications underwater.
Everbuild 101 Multi-Purpose Linseed Oil Putty is a hand applied setting glazing compound for sealing glass into metal and wooden frames. Benefits: - Easier to apply than most competitive putties.- Extended shelf life.- For wood and metal frames.- Added plasticiser improves adhesion and helps prevent cracking.- Single glazing of pretreated wooden and metal rebates. Limitations: - Unsuitable for plastic frames, heat absorbing glass, double glazing or frames treated with decorative microporous stains.- Always mix contents of pack thoroughly to blend in any surface oil.- Do not overpaint until a surface skin has formed (minimum 7 days, maximum 30 days).This Everbuild 101 Multi-Purpose Linseed Oil Putty comes in: Colour: NaturalSize: 2kg
Everbuild 101 Multi-Purpose Linseed Oil Putty is a hand applied setting glazing compound for sealing glass into metal and wooden frames. Benefits: - Easier to apply than most competitive putties.- Extended shelf life.- For wood and metal frames.- Added plasticiser improves adhesion and helps prevent cracking.- Single glazing of pretreated wooden and metal rebates. Limitations: - Unsuitable for plastic frames, heat absorbing glass, double glazing or frames treated with decorative microporous stains.- Always mix contents of pack thoroughly to blend in any surface oil.- Do not overpaint until a surface skin has formed (minimum 7 days, maximum 30 days).This Everbuild 101 Multi-Purpose Linseed Oil Putty comes in: Colour: NaturalSize: 1kg
Everbuild Jetcem Premix Sand and Cement is a premixed sand/cement based product which is easy-to-use and sets in approximately 30 min. Ideal for rapid patching or when a fast repair job is needed. Sets in the cold and wet.Size: 6kg (2 pack).
Jetcem is a specially formulated rapid setting cement based patching/repair compound which, when mixed with water, sets in about 30 minutes. Rapid setting (30 minutes, depending on ambient temperature and conditions).Easy mixing, just add water.Fills up to 25 mm in one application (for deeper holes in excess of 25 mm use Jetcem Premix sand/cement) Benefits: Internal and external repairs to gaps and cracks and walls and floors.Repairing flags, slabs, stones and bricks.Patching steps and window sills.Pointing brick and stone.Jointing earthenware pipes and drains.Repairs to ponds and pools.Setting in W/Cs and sinks.Leak sealing in concrete based surfaces.Setting railings and posts.Size: 2 x 6kg.
Jetcem is a specially formulated rapid setting cement based patching/repair compound which, when mixed with water, sets in about 30 minutes. Rapid setting (30 minutes, depending on ambient temperature and conditions).Easy mixing, just add water.Fills up to 25 mm in one application (for deeper holes in excess of 25 mm use Jetcem Premix sand/cement) Benefits: Internal and external repairs to gaps and cracks and walls and floors.Repairing flags, slabs, stones and bricks.Patching steps and window sills.Pointing brick and stone.Jointing earthenware pipes and drains.Repairs to ponds and pools.Setting in W/Cs and sinks.Leak sealing in concrete based surfaces.Setting railings and posts.This pack comprises 4x 3kg Jetcem Rapid Set Cement.
The Everbuild Instant Nails is a high strength, solvent-free, gap filling multi use adhesive that provides a quick grab and replaces mechanical fixings in many home improvement applications. Dries white and may be overpainted if required. Instant Nails should be at room temperature when you begin using the product. If Instant Nails has been stored in cool conditions it should be placed in a warm room/bucket of warm water before use to gently heat up to working temperature. Do NOT apply Instant Nails at temperatures below +4°C.
Everbuild Integral Liquid Waterproofer is a liquid additive that provides long term water protection to mortar, concrete and rendering. It helps to reduces water permeability and is suitable for all applications where resistance to water absorption is necessary such as pool and tank linings, roof areas, external rendering and pointing and structures below ground level. Tested to BSEN934-Part 3. Areas of Use:- Waterproofing below ground; basements etc.- Waterproofing above ground; mortar, render, screeds etc.- Waterproofing the linings of water tanks/silage pits/ponds
Everbuild Industrial Superglue HV is a high viscosity flash setting industrial adhesive based on advanced cyanoacrylate technology. It can fill gaps up to 0.25mm and is 100% solvent free. Can be used on MDF, rubber, metals, PVCu and plastics. Viscosity at: 25°C - 1500 cps. Set time: 10 to 30 seconds. Available in two sizes.Everbuild Industrial Superglue HV Size: 20g.
EVERBUILD GRIPTITE is a ready to use gap filling and panel adhesive based on a high bond strength synthetic rubber/resin mix in a solvent carrier. Adheres to most common surfaces inside and outside the home. Bonds to wood, plaster, plasterboard, carpet, carpet grippers, metal, glass, ceramics, brick, concrete, cork, PVCu and certain plastics. Benefits;Solvent based formula - quick drying / high early bond strength.Excellent adhesion/bond strength - adheres to most common surfaces.Good early grab properties - usable in both vertical and horizontal positions.High solids formulation - excellent gap filling properties without shrinkage.Suitable for use where both surfaces are non-porous.Excellent external weathering properties-Suitable for exterior use Ideal for:Bonding dado rails, architraves and skirting. Fixing parquet and cork flooring.Fixing wall cladding direct to internal wall surfaces or timber battens.Fixing battens directly onto walls without fastenings.Bonding carpet gripper systems to most floors without the need for nails or tacks.Bonding stair nosing to concrete or wooden stairs.Fixing polyester, wood, PVCu or metal thresholds.Fixing nameplates, plastic boxes, decorative frames, wall sockets and junction boxes to most surfaces.Securing aluminium or other skin panels to the framework or portable industrial buildings and caravans. Limitations;Do not use on damp surfaces: use EVERBUILD GUN A NAIL.Do not use as a mirror adhesive: use EVERBUILD MIRRORMATE Do not use on polystyrene/styrofoam/expanded polyurethane - use EVERBUILD GUN A NAIL.Heavy materials (greater than 8kg per sq meter) must be supported for at least 8-24 hours depending on size of item. Solvents present may attack sensitive plastics. If in doubt, rest a small area first. C4: 350ml.
Everbuild Gun A Nail Standard is a high strength, gap filling multipurpose building adhesive based on a tackified solvent free system for use in a wide variety of building and home improvement applications. Gun A Nail Standard can be used where at least one of the substrates to be bonded is porous. BENEFITS- Solvent-free - environmentally friendly formulation- Excellent adhesion/bond strength - adheres to most common surfaces.- Exceptional early grab properties - usable in both vertical and horizontal positions. - High solids formulation - excellent gap filling properties without shrinkage.- Extended open time - allows for easy repositioning after fixing- Will adhere to damp surfaces.- Water clean up - no hazardous solvents. AREAS FOR USE- Bonding dado rails, architraves and skirting- Fixing wall cladding direct to internal wall surfaces or timber battens- Fixing battens directly onto walls without fastenings- Bonding carpet gripper systems to most floors without the need for nails or tacks- Bonding stair nosing to concrete or wooden stairs- Securing aluminium or other skin panels to the framework or portable industrial buildings and caravans.
Everbuild 404 Fungicidal Wash is a powerful, fungicidal wash for the removal of lichens, fungi and algae on all mineral surfaces such as walls, paths, roofs, drives etc. It is effective on most surfaces and also leaves a residual surface to help prevent further infestation. Features: - Internal and external use.- Fast acting.- Leaves a residual surface to prevent future infestation.- Powerful formula. Registered with HSE under Control of Pesticides Regulations; 1986 (HSE 7183).- Kills mould caused by damp on internal and external floors and walls.- Kills mould growth on roofs prior to coating with bituminous coatings.- Removes algae from patios/drives.Size: 5 Litre
Everbuild Evercryl is a resin based, fibre reinforced roof repair compound which is effective on all common roofing surfaces and types, giving an instant roof repair even in the wet and on wet surfaces. Evercryl may also be applied in frosty conditions down to -5°C. Evercryl One Coat is instantly waterproof when applied, so there is no fear of washoff. Emergency leaks can be tackled immediately as there is no need to wait for the rain to stop. Evercryl One Coat is brush applied and dries to a smooth seamless flexible membrane which resists algae and fungal growth. Because of the high level of fibre reinforcement, Evercryl One Coat will bridge small cracks and requires only a one coat brush application to give instant and total water protection, even in areas subject to ponding. Evercryl One Coat requires no primer on sound non-porous surfaces. BENEFITS- May be applied in damp and wet conditions.- Formulated from lightfast acrylic polymers to withstand sunlight for longer periods than traditional bitumen coatings.- Fibre reinforced to bridge small cracks.- Primerless adhesion to most bituminous and non-porous surfaces. AREAS FOR USE- General sealing, maintenance, repair and waterproofing of most common roofs in wet or dry conditions - for use on concrete, fibre/cement, roofing felt mastic asphalt, existing bituminous roof coatings, rigid PVCu corrugated iron, metals, slates, brickwork, tiles, lead, copper and zinc. - Waterproofing guttering (plastic and metal), downpipes, gully, flashings, upstands, vents and leadwork.1 x Everbuild Evercryl One Coat Colour: GreySize: 2.5kg
Everbuild Evercryl is a resin based, fibre reinforced roof repair compound which is effective on all common roofing surfaces and types, giving an instant roof repair even in the wet and on wet surfaces. Evercryl may also be applied in frosty conditions down to -5°C. Evercryl One Coat is instantly waterproof when applied, so there is no fear of washoff. Emergency leaks can be tackled immediately as there is no need to wait for the rain to stop. Evercryl One Coat is brush applied and dries to a smooth seamless flexible membrane which resists algae and fungal growth. Because of the high level of fibre reinforcement, Evercryl One Coat will bridge small cracks and requires only a one coat brush application to give instant and total water protection, even in areas subject to ponding. Evercryl One Coat requires no primer on sound non-porous surfaces. BENEFITS- May be applied in damp and wet conditions.- Formulated from lightfast acrylic polymers to withstand sunlight for longer periods than traditional bitumen coatings.- Fibre reinforced to bridge small cracks.- Primerless adhesion to most bituminous and non-porous surfaces. AREAS FOR USE- General sealing, maintenance, repair and waterproofing of most common roofs in wet or dry conditions - for use on concrete, fibre/cement, roofing felt mastic asphalt, existing bituminous roof coatings, rigid PVCu corrugated iron, metals, slates, brickwork, tiles, lead, copper and zinc. - Waterproofing guttering (plastic and metal), downpipes, gully, flashings, upstands, vents and leadwork.1 x Everbuild Evercryl One Coat Colour: BlackSize: 2.5kg
EpoxySET 105 is a three-part general purpose repair mortar based on epoxy technology. Formulated to withstand chemicals, impact and abrasion and can be used to repair concrete, screeds, stone, brick and steel in even the most demanding domestic and industrial situations. Epoxyset 105 is the ideal product for repairing floors, steps, kerbs and cills. Pack includes finishing solvent and gloves.
The Everbuild Industrial Superglue is a medium viscosity formula that can fill gaps to 0.1mm. This Everbuild product is a very strong industrial superglue that is ideal for use on perfect fit surfaces where fast setting is required. It bonds non-porous surfaces like, plastics, metals, glass, PVCu, rubber and EPDM and has a viscosity at 25° c of 100cps and a setting time of 5 to 15 seconds so you will get the job in hand done quickly and with a professional finish.20gm bottle.
Stick 2 CARPET FIX SPRAY is sprayable medium-duty glue which fixes P.U. and a foam backed carpets, carpet tiles, underlay, paper felt and cork to most common substrates. This product has the following advantages:Economical in use.Fast rate of tack development.Time saving- easier and quicker to apply than most trowel/spreader applied adhesives.Foaming formula-gives low soak into substrates.CFC free.Repositionable.
The Everbuild brand is not only hugely popular with tradesmen and DIY'ers. It's quite literally huge - the biggest range in the business. In addition to core manufactured products the Everbuild range includes a wide range of ancillary items from sealant guns to dust sheets, line markers to masking tape. The range of products Everbuild actually manufacture is extensive, from chemical blending for admixtures and water proofers through water based sealant manufacturing to the highly advanced polymer engineering undertaken in manufacturing silicone and hybrid sealants, as well as adhesives and a wide range of powder products. Everbuild Stick 2 All Purpose Spray Contact Adhesive is a sprayable glue which bonds to most common materials including wood, concrete, stone, tiles, rubber, foam, metals, rigid plastics, polyethylene, canvas fabrics, cardboard, paper and cork. It is ideal for securing most carpets/floor coverings. Suitable for internal and external use, giving permanent or temporary adhesion. It provides good adhesion with a good rate of tack development, is easy to use with no messy spreading / clearing up and is halogen and CFC free. Size : 500 ml.
Contractors PVA is a multi purpose agent, primer sealer, cement filler and plaster admixture that adheres to most common building and DIY materials except PVC and rubber. Ideal for priming unsound surfaces prior to plastering or painting, as an adhesive on wood, cork, textiles and most applications where at least one surface is porous, for general dust sealing on flaking paintwork/walls etc. and as a cement admixture. NOTE – for areas subject to constant damp, use Everbuild SBR Bond which is water resistant.
STICK2® All-Purpose Contact Adhesive is a premium grade, rubber-based contact adhesive suitable for use with a wide variety of materials for both professional and DIY use. The product may be used internally and externally* for bonding decorative laminates, all types of wood, rigid PVC, ABS, leather, cork, linoleum, rubber, stone, metals and dense fabrics. All tins are fully printed. This product has excellent adhesion and will stick to most common surfaces.*Excluding 5L size which is for internal use onlyThis Everbuild STICK2® All-Purpose Contact Adhesive has exceptional bond strength and will out perform conventional wood glues in its class. EVBCONA5 is suitable for internal use only. 5 Litre
STICK2® All-Purpose Contact Adhesive is a premium grade, rubber-based contact adhesive suitable for use with a wide variety of materials for both professional and DIY use. The product may be used internally and externally* for bonding decorative laminates, all types of wood, rigid PVC, ABS, leather, cork, linoleum, rubber, stone, metals and dense fabrics. All tins are fully printed. This product has excellent adhesion and will stick to most common surfaces.*Excluding 5L size which is for internal use onlyThis Everbuild STICK2® All-Purpose Contact Adhesive has exceptional bond strength and will outperform conventional wood glues in its class. EVBCON750 is suitable for internal and external use, with excellent weathering and ageing properties. 750ml
