Rapid No. 140 precision cut flat wire staples are made from high-performance galvanised steel for strength and durability. Flat wire staples have a larger holding area against the material, making them ideal for thin plastic or insulation.Type: 140 (galvanised).Size: 6mm leg length.Quantity: Poly Pack of 5,000. For use with the Rapid R44, R64, R14, R34, MS840, Alu 740, R11, R211, R54, E-Tac, CSN140 and ESN114 tackers.
Rapid No. 140 precision cut flat wire staples are made from high-performance galvanised steel for strength and durability. Flat wire staples have a larger holding area against the material, making them ideal for thin plastic or insulation.Type: 140 (galvanised)Size: 14mm leg length.Quantity: Poly pack of 5,000. For use with the Rapid R44, R64, R34, MS840, Alu740, R54, E-TAC and ESN114.
Rapid No. 140 precision cut flat wire staple are made from high-performance stainless steel for strength and durability. Flat wire staples have a larger holding area against the material, making it ideal for thin plastic or insulation. Stainless steel wire classification class 2 AISI 304 ideal for outdoor use or use in humid areas. Type: 140 (stainless steel).Size: 10mm leg lengthQuantity: 650. For use with: Rapid R34, R44, R64, ALU740, ALU840, ALU940, R11, R311, R54, E-tac, ESN114, R214, PS111 tackers.
Rapid No. 140 precision cut flat wire staples are made from high-performance galvanised steel for strength and durability. Flat wire staples have a larger holding area against the material, making them ideal for thin plastic or insulation.Type: 140 (galvanised)Size: 12mm leg length.Quantity: Poly pack of 5,000. For use with the Rapid R44, R64, R34, MS840, Alu 740, R211, R54, E-Tac, CSN140 and ESN114 tackers.
Tacwise Flat Wire Staple. Ideal for breather membrane (Tyvek, etc), building paper and insulation. For hand/electric staple guns and hammer tackers using 140, T50, G type staples. Compatible with Tacwise A14014V.Size: 8mm.Pack quantity: 2000.
Tacwise Flat Wire Staple. Ideal for breather membrane (Tyvek, etc), building paper and insulation. For hand/electric staple guns and hammer tackers using 140, T50, G type staples. Compatible with Tacwise A14014V.Size: 12mm.Pack quantity: 2000.
The Stanley 0TR250 is a heavy-duty Stapler / Nail Gun and is fitted with and easy push handle that will penetrate the staple or nail into the workpiece with ease. The pinch point free design helps to protect cables so that they do not to get crushed on application. This Stanley 0TR250 has an aluminium cast housing for greater durability and strength, is fitted with Hi/Lo adjustment to match density of materials and has easy access staple and brad insertion for faster loading. This staple and nail gun has a lock down handle system fitted for easy and neat storage. It will accept heavy-duty staples and brads for multiple applications from cable laying, upholstery work, fencing, architrave fitting and much more. Brad nails stocked are 12mm ( STA0SWKBN050 ) and 15mm ( STA0SWKBN062 ).
These Forgefix Hammer Fixings include both plug and Pozi head screw. The plug is made from Nylon for a longer life and durability and the anti-rotation barbs prevent the plug from rotating in the hole. The fixings are through fixing, eliminating the need for marking and re-positioning. To use, simply drill through both fixture and into the base material and tap in the Hammer Fixing with a strong blow to complete the fix and ensure full expansion. The screw can be released if required. APPLICATIONWidely used for baton, window and door frame fixing. Quick and easy to use - ideal for repetitive installations.Ensure the correct Pozi drive insert bit is used to release fixture and fitting if required.Hammer Fixing & Plug M8 x 100 Bag 10
These Forgefix Masonry Anchor Projection Bolts have a Zinc Yellow Passivated finish for increased durability and resistance to corrosion. They have a tough and reliable construction to cover most heavy-duty fixing applications. The four-way expansion shield offers extremely strong and secure anchorage, and the specially manufactured retaining spring ensures encapsulation of the wedge during expansion. Projection bolts offer easier fixture removal or repositioning due to the bolt remaining in the shield. APPLICATION:Ideal for securing reinforcement wall plates, lighting supports, guy ropes and bracketry.Ensure the correct socket drive or spanner is used to ensure accurate installation. When sizing a Masonry Anchors it is most important to know the depth of the material that you are fixing.Eg: Size M610: The 'M6' is the thread size of the bolt. The '10' denotes the maximum thickness of material it will fix. The Zinc Yellow Passivation process of electroplating is similar to the ‘Galvanised’ and ‘Zinc Plated’ processes but with the addition of a yellow dye. It provides a coating that is aesthetically pleasing, and which offers excellent resistance to corrosion.Masonry Anchor Bolt Projecting Zinc Yellow Passivated M6 x 10 Bag 10
These Forgefix Lost Head Nails are used for decorative type applications, as the head virtually disappears when punched below the timber surface. The nails help to reduce timber deformation. The nails have a 'Bright' finish, which is simply the basic raw mild steel material, without any coating or finish. APPLICATION:Used in many decorative installations, such as door frame moulding or architraves.Lost Head Nail Bright 40mm Bag Weight 500g
These ForgeFix ForgeFast Wood Screws have a universally accepted, Pozi compatible drive. They have 6 underhead lobes for improved countersinking and reduced surface dust, and reinforced countersunk necks which improve holding power. The screws have an anti-friction thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber and improved drawing strength. The thread is serrated for improved pull-out and reduced torque when inserting the screw. The double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel. The screws have a 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use.Size: 4.5 x 80 mm.Box quantity: 100.
Everbuild Mortar Admix is an air entraining plasticiser that replaces lime in the mix. Provides an easy to work, 'butter like' consistency to the mortar. It also prevents shrinkage, cracking and crazing during setting. For use in brick laying and plastering mortars. Helps to improve frost resistance and long term resistance to freeze-thaw cycles when set. Tested to BSEN934-Part 3. Areas of Use:- Load bearing brickwork- Block laying- External/Internal rendering- Pointing/repointing brickwork
The ForgeFix Spectre Screws are advanced multipurpose wood screws with double countersunk heads and pozi compatible recess. They have a sawtooth thread design to prevent splitting and reamer to prevent jacking. The screws have a zinc yellow passivated finish for excellent resistance to corrosion. The zinc yellow passivation process of electroplating is similar to the 'galvanised' and 'zinc plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish.Specification: Size: 4.0 x 50mmThread: 30mm lengthPack Quantity: Box of 500
Gorilla Tape is an ultra tough cloth tape, made from 3 layers: a double thick adhesive layer, a strong reinforced backing and a tough all-weather shell. The double thick adhesive is a high quality adhesive that will allow the tape to stick to rough, porous and imperfect surfaces. The strong reinforced backing has a high fibre count cloth backing that gives high strength, but can be ripped easily by hand. The tough all weather shell gives a tighter barrier against moisture and it has higher UV qualities than other cloth tapes on the market today. Gorilla Tape strikes a delicate balance between strength and usability, providing the maximum amount of sticking power without sacrificing ease of use. Suitable for contractors and DIYers, as well as sports enthusiasts and outdoor adventurers looking for a tough and portable tape to repair, patch or hold equipment while building and remodelling, landscaping, hunting, fishing, hiking, camping, boating, surfing or bicycling.The GRGTHR Gorilla Tape Handy Roll is thin at 1 inch/25mm wide and 9 metres long.
These Forgefix Oval Lost Head Nails are versatile and ideal for use in general joinery. The nail head virtually disappears when punched below the timber surface, making them ideal for decorative type applications. The shape of the nail helps to prevent splitting of hard or brittle timber. The nails have a 'Bright' finish, which is simply the basic raw mild steel material, without any coating or finish. APPLICATION:General cross section of joinery applications. By aligning the nail with the wood grain, splitting is reduced.Oval Lost Head Nail Bright Finish 30mm Bag Weight 250g
Rawlplug® UNO® Plugs are truly universal plugs which fix into any wall, ceiling or floor. Suitable for use in: concrete, brickwork, stone, blockwork, plasterboard. They have a unique design with expansion throughout the length of the plug. They expand at the top giving instant grip. Anti-rotation features prevent spinning in the hole. Screw Head Size:Yellow: 3-4.5mmRed: 3.5-5mmBrown: 4-6mmBlue: 4.5-6mmGrey: 5-8mm Typical Applications: - Shelving and cabinets- Suspended ceilings- Switch boxes- Trunking and cable trays- Boilers- Water heaters and radiatorsThese Rawlplug® UNO® Plugs have the following specification: Colour: BrownSize: 7 x 30mmPack Size: 48
The Everbuild Industrial Superglue is a medium viscosity formula that can fill gaps to 0.1mm. This Everbuild product is a very strong industrial superglue that is ideal for use on perfect fit surfaces where fast setting is required. It bonds non-porous surfaces like, plastics, metals, glass, PVCu, rubber and EPDM and has a viscosity at 25° c of 100cps and a setting time of 5 to 15 seconds so you will get the job in hand done quickly and with a professional finish.Size - 50 g.
