Forgefix TechFast Roofing Sheet to Steel Hex Light Duty Screws are used for joining metal roofing panels to steel frame buildings. The screws are fire resistant and corrosion resistant. Protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours. Complies with EU Safety, Health and Environmental requirements. Supplied without washer.These Forgefix TechFast Roofing Sheet to Steel Screws have the following specification: Size: 5.5 x 80mmEffective Thread Length: 71mmHead Type: 8mm HexPack Size: 100Drill Tip: No.5 No.5 drill tip for self-drilling in heavy gauge steel up to 12.5mm.
This pack of Command™ White Decorating Clips contains: 40 x White Decorating Clips48 x Refill Strips Command™ White Decorating Clips provide an innovative solution for hanging string lights, fairy lights and seasonal decorations securely and damage-free. 3M stretch-release technology provides a strong hold and removes cleanly. They’re easy to apply and remove - leaving no holes, marks or sticky residue. Rehanging them is as easy as applying a Command™ Refill Strip, so you can take down, move and reuse them again and again. Suitable for a wide variety of surfaces; solid, hollow and painted walls, as well as other materials including wood, tile, metal and glass.
The ForgeFix Spectre Screws are advanced multipurpose wood screws with double countersunk heads and pozi compatible recess. They have a sawtooth thread design to prevent splitting and reamer to prevent jacking. The screws have a zinc yellow passivated finish for excellent resistance to corrosion. The zinc yellow passivation process of electroplating is similar to the 'galvanised' and 'zinc plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish.Specification: Size: 3.0 x 12mmThread: Fully threadedPack Quantity: Box of 200
ForgeFix ForgeFast Wood Screws have a universally accepted, Torx® compatible drive. Their recessed ribs provide improved countersinking and reduced surface dust, and their reinforced countersunk necks improve holding power. The screws have a patented drill and drive thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber, increased pull-out and a firmer fix. A sharp point provides faster bite and is capable of piercing 0.8mm steel. The screws have an 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use. Every box is supplied with a Torx® compatible bit.Size: 4.5 x 60mm.Box quantity: 100.
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm.Size: 6.Adjustment: 110 - 140mm.
These Forgefix Through Bolts (also known as Wedge Anchors or Toothless Anchors) have a Zinc Yellow Passivated finish for durability and corrosion resistance. They are through-fixing, and extremely economical and quick to install. APPLICATIONIdeal for fixing brackets, cladding, restraints, racking, fabricated stairwells and industrial doors.Ensure the correct socket drive or spanner is used to ensure accurate installation. The Zinc Yellow Passivation process of electroplating is similar to the Galvanised and Zinc Plated processes but with the addition of a yellow dye. It provides a coating that is aesthetically pleasing, and which offers excellent resistance to corrosion.Through Bolt Zinc Yellow Passivated M12 x 100 Bag 5
These Forgefix Hammer Fixings include both plug and Pozi head screw. The plug is made from Nylon for a longer life and durability and the anti-rotation barbs prevent the plug from rotating in the hole. The fixings are through fixing, eliminating the need for marking and re-positioning. To use, simply drill through both fixture and into the base material and tap in the Hammer Fixing with a strong blow to complete the fix and ensure full expansion. The screw can be released if required. APPLICATIONWidely used for baton, window and door frame fixing. Quick and easy to use - ideal for repetitive installations.Ensure the correct Pozi drive insert bit is used to release fixture and fitting if required.Hammer Fixing & Plug M8 x 80 Bag 10
These Forgefix Hammer Fixings include both plug and Pozi head screw. The plug is made from Nylon for a longer life and durability and the anti-rotation barbs prevent the plug from rotating in the hole. The fixings are through fixing, eliminating the need for marking and re-positioning. To use, simply drill through both fixture and into the base material and tap in the Hammer Fixing with a strong blow to complete the fix and ensure full expansion. The screw can be released if required. APPLICATIONWidely used for baton, window and door frame fixing. Quick and easy to use - ideal for repetitive installations.Ensure the correct Pozi drive insert bit is used to release fixture and fitting if required.Hammer Fixing & Plug M6 x 80 Bag 10
The long arm design reduces to a minimum the amount of effort required to set rivets up to 6.4mm diameter, the riveter is supplied complete with five interchangeable nozzles for all popular rivet sizes. This industrial grade tool is perfect for use in garages, coachworks, boat building yards, agricultural machine workshops and general maintenance workshops.High performance three jaw gripping system with built in mandrel collector. Suitable for rivet sizes 3.2, 4, 4.8, 6 and 6.4mm.
Do you have problem steps, decking areas or pathways around the house where people can lose their footing? Areas like these can be particularly dangerous for the elderly, disabled or children, leading to serious injuries in some cases, if no action is taken. Self-adhesive, easily applied, can be used indoors or outdoors.Quick and cost effective.Can be applied to a multitude of surfaces.Available in black/yellow or clear. RECOMMENDED USES: Steps, patios, garage floors, decking areas, emergency staircases, apartment staircases and access ramps.Size 50mm x 18mColour: Black and Yellow.
EVERBUILD GRIPTITE is a ready to use gap filling and panel adhesive based on a high bond strength synthetic rubber/resin mix in a solvent carrier. Adheres to most common surfaces inside and outside the home. Bonds to wood, plaster, plasterboard, carpet, carpet grippers, metal, glass, ceramics, brick, concrete, cork, PVCu and certain plastics. Benefits;Solvent based formula - quick drying / high early bond strength.Excellent adhesion/bond strength - adheres to most common surfaces.Good early grab properties - usable in both vertical and horizontal positions.High solids formulation - excellent gap filling properties without shrinkage.Suitable for use where both surfaces are non-porous.Excellent external weathering properties-Suitable for exterior use Ideal for:Bonding dado rails, architraves and skirting. Fixing parquet and cork flooring.Fixing wall cladding direct to internal wall surfaces or timber battens.Fixing battens directly onto walls without fastenings.Bonding carpet gripper systems to most floors without the need for nails or tacks.Bonding stair nosing to concrete or wooden stairs.Fixing polyester, wood, PVCu or metal thresholds.Fixing nameplates, plastic boxes, decorative frames, wall sockets and junction boxes to most surfaces.Securing aluminium or other skin panels to the framework or portable industrial buildings and caravans. Limitations;Do not use on damp surfaces: use EVERBUILD GUN A NAIL.Do not use as a mirror adhesive: use EVERBUILD MIRRORMATE Do not use on polystyrene/styrofoam/expanded polyurethane - use EVERBUILD GUN A NAIL.Heavy materials (greater than 8kg per sq meter) must be supported for at least 8-24 hours depending on size of item. Solvents present may attack sensitive plastics. If in doubt, rest a small area first. C4: 350ml.
16 gauge finish nails, which are compatible with: Tacwise Air Powered Nailers: DFN50, DFN50WHH and FFN64LHH.Tacwise Battery Powered Nailers: Ranger 2 16G Nailer.And all other nailers that take 16g straight finish nails.
Duck Tape® Colours is a range of brightly coloured and patterned tapes, which are excellent for crafting and imaginative projects. The tapes have the same quality as Original Duck Tape®, providing high-performance strength and adhesion. The tapes are waterproof too, although not suitable for total immersion in water. The tapes can be cut with scissors or torn by hand. Available in many colours and designs.This Duck Tape® Colours & Patterns comes in the following: Colour/Pattern: PurpleWidth: 48mmLength: 18.2m
This Weller Electronic Lead-Free Solder is ideal for soldering semi-professional soldering tasks. Sn97Cu0.7/DIN EN ISO 9453. Standard 2.2%. Specifications: Diameter: 1.0mm.Size: 25g Spool.
This Weller Helping Hands Holder frees up your hands for improved soldering precision and flexibility. Easily position components with two 4-way swivel alligator clamps. It also has a magnifier, allowing you to magnify your work area 4x larger for expert soldering.
Unibond Repair Tape is a clear tape with an extra strong adhesive. Perfect for securing, mounting and fixing many items in the house, garden and office. Size: 50mm x 25m.
Forgefix TechFast Composite Roof Panel to Timber Hex Screws are used to join composite roof panels to timber frame buildings. The specially designed compression control thread prevents damage and denting of panels. No pre-drilling required, the self-drilling T17 gash point on screws allows for a rapid installation. The screws are fire and corrosion resistant, protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours. Complies with EU Safety, Health and Environmental requirements. They are supplied with 16mm EPDM rubber washers.These Forgefix TechFast Composite Roof Panel to Timber Hex Screws have the following specification: Size: 6.3 x 125mmSteel Thickness: 0.5-1.2mmHead Type: 8mm HexPack Size: 100
Pritt Stick is an excellent quality glue stick with high initial tack, and, thanks to the special airtight cap and tube system, the glue stick keeps fresh and can be used for several years. The glue is solvent free and washable at 30°. It can be applied smoothly and evenly, and allows sufficient time to reposition the object.The Small (11g) Pritt Stick is well-suited for gluing smaller areas, edges, and corners.
These Forgefix Multi-Purpose Pozi Screws with countersunk heads have a zinc yellow passivated finish for increased durability. The screws are immensely popular and versatile, and used in all trades including joinery, electrical and plumbing. Also widely used in DIY applications. APPLICATIONSuitable for use with many materials including PVCu, Timber, Chipboard, MDF, and other similar types. The Zinc Yellow Passivation process of electroplating is similar to the 'Galvanised' and 'Zinc Plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish, whilst having excellent resistance to corrosion. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have single threads, designed to offer higher pull out values and quicker insertion.Multi-Purpose Pozi Screw Countersunk ST ZYP 3.0 x 30mm Box 200
These Forgefix General Purpose Pozi Screws with round heads are zinc plated finish for increased durability. They are versatile screws, suitable for use in and with many materials. APPLICATIONIdeal for use in many ironmongery, electrical and plumbing applications.Can be used with various screw cover caps. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. Round headed screws have a flat under head surface making the screw ideal for laying flat on sheet material of all types, reducing deformation. These screws have twin threads to enable an easy start when driving.General Purpose Pozi Screw Round Head TT ZP 2 x 8 Box 200
These Forgefix General Purpose Pozi Screws with countersunk heads have an electro brassed finish for increased durability and to suit most internal and decorative requirements. They are versatile screws, ideal for use in and with many materials. APPLICATION:Ideal for use in many decorative installations.Can be used with various screw cover caps. The Electro brassed process of electroplating is similar to the 'Galvanised' and 'Zinc Plated' processes but with the addition of a dye. It offers an aesthetically pleasing finish that is resistant to corrosion. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The screws' countersunk heads are designed to sink flush with substrates to leave a smooth surface finish. They have twin threads to enable an easy start when driving.General Purpose Pozi Screw Countersunk TT Electro Brass 1.1/4 x 6 Box 200
