These Forgefix Sleeve Anchors are through fixing, for ease of use and speed of installation. Their sleeve wedge cones are designed to give maximum expansion even in shallow anchoring depths. They have a reduced outside sleeve diameter compared to thread size for smaller hole sizes, offering reduced stress in base materials. The anchors are Zinc Yellow Passivated for increased corrosion resistace. They offer easier fixture removal or repositioning due to the bolt remaining in the shield. Also known as 'Projection Bolt' sleeve anchors. APPLICATIONWidely used for fixing balustrades, handrails, racking and holding down machinery, plus many more installation applications.Ensure the correct socket drive or spanner is used to ensure accurate installation. The Zinc Yellow Passivation process of electroplating is similar to the ‘Galvanised’ and ‘Zinc Plated’ processes but with the addition of a yellow dye. It provides a coating that is aesthetically pleasing, and which offers excellent resistance to corrosion.Sleeve Anchor Fixing Hex Nut M8 x 65 Bag 10
ForgeFix Hex Head Lightning Bolts provide a virtually stress-free fixing for close to edge applications. They are self-threading and allow quick and easy installation of most masonry fixing applications. They can simply be screwed into a pre-drilled hole, without the need for a sleeve or plug. The bolts are through-fixing, eliminating the need for marking and re-positioning. They have a high load capacity due to the thread interlocking into the base material. The bolts have an 'Elementech' coating for superior anti-corrosion, which has been salt spray tested to 1,000 hours. Applications: Widely used for fixing battens, balustrades, handrails, racking and holding down machinery, plus many more installation applications. Suitable for most masonry substrates including concrete and brickwork but also for hollow block or bricks due to the nature of the thread type anchoring along the total length of the fixing.Specifications: Size: M8 x 60mm.Pack quantity: 100.
The holder for the Rapid R311 Hammer Tacker is ideal for attaching to a belt to ensure it is always at hand when using in difficult to access locations. It also protects the hammer tacker when being stored from damage and moisture. The holder is made from lightweight, waterproof polyester, it is riveted for durability and reinforced with an anti-slip, steel mesh.
Rawlplug® UNO® Plugs are truly universal plugs which fix into any wall, ceiling or floor. Suitable for use in: concrete, brickwork, stone, blockwork, plasterboard. They have a unique design with expansion throughout the length of the plug. They expand at the top giving instant grip. Anti-rotation features prevent spinning in the hole. Screw Head Size:Yellow: 3-4.5mmRed: 3.5-5mmBrown: 4-6mmBlue: 4.5-6mmGrey: 5-8mm Typical Applications: - Shelving and cabinets- Suspended ceilings- Switch boxes- Trunking and cable trays- Boilers- Water heaters and radiatorsThese Rawlplug® UNO® Plugs have the following specification: Colour: BrownSize: 7 x 30mmPack Size: 1,000
Using a staple gun shouldn’t be a workout. Rapid ALU Combi Tackers with Powercurve® Technology were developed with a leading physiotherapist for up to 65% less effort. It’s not only easier to squeeze, it also perfectly matches the power of your hand. The patented 3-step force adjuster system lets the user decide for themselves how much power to deploy. Save effort on jobs with short leg lengths and turn up the power with a simple flip of the force adjuster when required. Save energy - Your own.The Rapid ALU940 Combi Tacker is a high quality, ergonomically designed tacker ideal for do-it-yourself work, for example labels, textiles, canvas and other fibred materials as well as fine wood trim around the house. It has a dual magazine which uses Rapid No. 140 staple 6-14mm and No. 8 brads 15mm. Made in Sweden, it has a strong and light aluminium exterior with an ergonomic design and comfortable soft grip areas and comes covered by a 3 year guarantee.
These Forgefix Multi-Purpose Pozi Screws with countersunk heads have a zinc yellow passivated finish for increased durability. The screws are immensely popular and versatile, and used in all trades including joinery, electrical and plumbing. Also widely used in DIY applications. APPLICATIONSuitable for use with many materials including PVCu, Timber, Chipboard, MDF, and other similar types. The Zinc Yellow Passivation process of electroplating is similar to the 'Galvanised' and 'Zinc Plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish, whilst having excellent resistance to corrosion. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have single threads, designed to offer higher pull out values and quicker insertion.Multi-Purpose Pozi Screw Countersunk ST ZYP 3.5 x 30mm Box 200
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm.Size: 1X.Adjustment: 30 - 40mm.
For use in 0327 Master Nailer 191EL Pro, 0192 Master Nailer 181ELS Pro, 0328 Hobby 53EL, 516857 Pro 140EL, 0756 Master Nailer Ranger 40 Duo Pro Pack, 0758 Master Nailer Ranger 40 Duo Trademans Pack.
The Gorilla Heavy-Duty Double Sided Mounting Tape provides a quick and easy solution to mount and repair where traditional fasteners can't. This industrial strength tape grips to smooth and rough surfaces, delivering an instant and weatherproof bond. Suitable for use indoors and outdoors.This Gorilla Heavy-Duty Double Sided Mounting Tape has the following specification: Colour: BlackWidth: 25.4mmLength: 1.52m
The Rapid High Performance Rivets have high grade aluminium heads and steel pins. Ideal for all applications, these extra strong multipurpose rivets ensure a permanent fix. They are ideal for use on licence plates, mudguards, metal and plastic coverings, name places, metal sheets and repair work. Each pack is supplied with a drill bit. Suitable for use with the RP10, RP40, RP60 and RP100 riveters.Specifications:Size: 3.2 x 8mm.Grip range: 2-4mm.Pack: Blister of 50.
Faithful Blue Poly Rope meets the needs of most trades and is suitable for a variety of applications in the home and workplace.Diameter : 10 mm.Length : 30 m.Breaking strian : 180 kg.
These Forgefix Multi-Purpose Pozi Screws with countersunk heads have a zinc yellow passivated finish for increased durability. The screws are immensely popular and versatile, and used in all trades including joinery, electrical and plumbing. Also widely used in DIY applications. APPLICATIONSuitable for use with many materials including PVCu, Timber, Chipboard, MDF, and other similar types. The Zinc Yellow Passivation process of electroplating is similar to the 'Galvanised' and 'Zinc Plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish, whilst having excellent resistance to corrosion. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have single threads, designed to offer higher pull out values and quicker insertion.Multi-Purpose Pozi Screw Countersunk ST ZYP 5.0 x 35mm Box 200
Rawlplug® UNO® Plugs are truly universal plugs which fix into any wall, ceiling or floor. Suitable for use in: concrete, brickwork, stone, blockwork, plasterboard. They have a unique design with expansion throughout the length of the plug. They expand at the top giving instant grip. Anti-rotation features prevent spinning in the hole. Screw Head Size:Yellow: 3-4.5mmRed: 3.5-5mmBrown: 4-6mmBlue: 4.5-6mmGrey: 5-8mm Typical Applications: - Shelving and cabinets- Suspended ceilings- Switch boxes- Trunking and cable trays- Boilers- Water heaters and radiatorsThese Rawlplug® UNO® Plugs have the following specification: Colour: RedSize: 6 x 28mmPack Size: 48
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm.Size: 2. Adjustment: 40 - 55mm.
Cascamite Cascapur is a fast curing, D4-rated PU wood glue. Ideal for demanding applications, including external, structural, and load-bearing uses. It is also suitable for general joinery thanks to its fast-curing and gap filling properties.
1 x Cascamite Cascapur Fast Cure PU Wood Glue 250ml.
These Faithfull Cable Ties are made of durable Nylon. They are self-locking and are suitable for multiple uses around the house, garden and in industry. Ideal for binding and organising several cables or wires together.The Faithfull Cable Ties have the following specifications: Colour: White. Length: 200mm. Width: 3.6mm. Pack Quantity: 100.
Forgefix Pozi Screw Cover Caps are specifically designed for use with Pozi Head Screws, sizes 6 and 8 gauge or 3.5-4.5mm. The male pozi insert underneath the cap head fits snugly in to the pozi head of the screw. APPLICATION:Offers a concealed yet aesthetically pleasing finish where screws would normally be bare to the elements or the eye.Used for many sign and sanitary installations as well as cupboard and carcass assembly.Pozi Cover Cap White No. 6-8 Bag 100
The Faithfull Self-Adhesive Draught Excluder strip for sealing gaps around doors and windows. It stops draughts and reduces noise, providing insulation for your home. This weather-proof W Profile EPDM (Ethylene Propylene Diene M-Class rubber) foam seal is stretch resistant and self-adhesive for easy application and has a long life expectancy of 5 years. Faithfull EPDM Draught Excluder for sealing gaps from 1 to 3mm. Specifications: Colour: Brown.Size: 9mm x 3.5mm.Length: 24M (4 x 6M).
These Forgefix Cavity Wall Anchors are a specialist plasterboard fixing with Pozi and slotted combination drive insert. They have an all-metal construction for applications which require heat resistance and are Zinc Plated for increased resistance to corrosion. The anchors have anti-rotation teeth, which pierce the base plasterboard skin to ensure firm anchorage. APPLICATION:All metal construction means the anchors are suitable for the heavier duty tasks such as fixing radiators and wall units. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.Cavity Wall Anchor ZP M4 x 38 Bag 10
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. Standard range hose clips are manufactured from mild steel and are zinc plated to aid corrosion resistance and are available in a wide variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm.Size: 3.Adjustment: 55 - 70mm.
The Rapid High Performance Rivets have high grade aluminium heads and steel pins. Ideal for all applications, these extra strong multipurpose rivets ensure a permanent fix. They are ideal for use on licence plates, mudguards, metal and plastic coverings, name places, metal sheets and repair work. Each pack is supplied with a drill bit. Suitable for use with the RP10, RP40, RP60 and RP100 riveters.Specifications:Size: 4 x 14mm.Grip range: 8-10mm.Pack: Blister of 50.
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. The Stainless range of hose clips are manufactured using a marine grade 316 W5 stainless steel and are ideal where a high resistance to corrosion is required. Clips are available in a variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm.Size: MOO.Adjustment: 11 - 16mm.
Rawplug All Metal Self-Drill Plasterboard Fixings which fit flush to board and can be used in double thickness plasterboard. Will also provide a secure fixing into lightweight and aerated concrete blocks. (NOTE. an 8mm pilot hole is required for this fixing). For use only with the screws supplied. Max Fixture Thickness: 10mm (20mm Screw). Except RAW07130 Max Fixture Thickness: 35mm (25mm Screw).Pack of 6.
Thompson's 10 Year Roof Seal is a high-performance coating which cures to form a durable, flexible membrane suitable for resealing, and protecting whole roofs or repairing large areas of damage to a variety of roofing materials. The 10 year formulation is designed to flex with the natural movement of the roof protecting the membrane from cracking and splitting over time. UV light stable iron oxide pigments provide a protective shield against harmful UV radiation ensuring 10 year weatherproofing performance under extreme conditions. For best results the advanced formula should be applied directly to dry surfaces, the 10 year formulation forms a vapour permeable membrane which repairs and weatherproofs while allowing any trapped moisture in the substrate to escape. This product is supplied in a tin with resealable lid and the following specifications:Colour: Black.Available Sizes: 1L, 2.5L or 4L.1 x Ronseal Thompson's 10 Year Roof Seal Grey 1 litre.
Jubilee® clips are Kite marked to BS5315 (1991) and the company is licensed to BS EN ISO 9001. Lloyds Register Approved 304 Stainless Steel, used for fixing flexible rubber hoses, metal tubes etc. Stainless Steel gives increased resistance to corrosion.Size OSS Adjustment 16 - 22mmAdjustment 5/8 - 7/8in
