Forgefix Hex Head Lightning Bolts provide a virtually stress-free fixing for close to edge applications. They are self-threading and allow quick and easy installation of most masonry fixing applications. They can simply be screwed into a pre-drilled hole, without the need for a sleeve or plug. The bolts are through-fixing, eliminating the need for marking and re-positioning. They have a high load capacity due to the thread interlocking into the base material. The bolts have an 'Elementech' coating for superior anti-corrosion, which has been salt spray tested to 1,000 hours. Applications: Widely used for fixing battens, balustrades, handrails, racking and holding down machinery, plus many more installation applications. Suitable for most masonry substrates including concrete and brickwork but also for hollow block or bricks due to the nature of the thread type anchoring along the total length of the fixing.Specifications: Size: M12 x 200mm.Pack quantity: 5.
These Forgefix Hexagon Nuts are bright Zinc Plated for increased corrosion resistance. The hexagonal shape is designed to be driven by a wrench (spanner) and provides excellent torque when done so. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrates surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.Hexagon Nut ZP M3 Bag 100
These Faithfull Welded Chains are galvanised for increased durability and protection against the elements. These chains are load tested, but not certified and should never be used for any overhead lifting, load binding or towing applications. Maximum load figures quoted are for guidance ONLY.This Faithfull Galvanised Chain has the following specification: Link Diameter: 6mm.Chain Length: 15m.Max Load: 250kg.
These ForgeFix ForgeFast Wood Screws have a universally accepted, Pozi compatible drive. They have 6 underhead lobes for improved countersinking and reduced surface dust, and reinforced countersunk necks which improve holding power. The screws have an anti-friction thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber and improved drawing strength. The thread is serrated for improved pull-out and reduced torque when inserting the screw. The double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel. The screws have an 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is salt spray tested to 400 hours. The screws are suitable for interior and exterior use. Every tub is supplied with a Torx® compatible bit.Size: 4.0 x 60mm.Pack quantity: 700.
These Forgefix single threaded Decking Screws have Pozi heads and are specially designed, hardened and green treated. The design of the screw helps prevent splitting the boards, and allowing them to expand and contract with the changing seasons. APPLICATIONSpecifically used in Decking applications but also widely used in exterior timber and fencing applications. The 1,000 hour green treated finish offers excellent corrosion resistance to ACQ (Alkaline Copper Quaternary) treated timber used in construction and decking applications. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. Single thread screws have been designed to offer higher pull out values and quicker insertion.Decking Screw Pozi ST Green Anti-Corrosion Treated 4.5 x 50mm Tub1000
These Forgefix high-low thread Concrete Frame Screws are Zinc Yellow Passivated for increased resistance to corrosion. They offer a virtually stress free fixing, allowing close to edge applications. They are through-fixing, eliminating the need for marking and re-positioning when fixing batons etc. The Torx compatible head of the screw enables increased torque control. APPLICATION: Extremely popular fixing for window and door frames. Also now used as a versatile fixing for many applications in DIY, Joinery, Plumbing and Electrical trades. The Zinc Yellow Passivation process of electroplating is similar to the 'Galvanised' and 'Zinc Plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish, whilst having excellent resistance to corrosion. By design, Torx compatible head screws resist cam-out much better than Phillips or Slotted screws. Where Phillips heads were designed to cause the driver to cam out, to prevent over-tightening, Torx compatible heads were designed to prevent it and to achieve a desired torque consistently. Torx compatible head sizes are described using the capital letter 'T', followed by a number. A smaller number corresponds to a smaller point-to-point dimension of the screw head. Only the proper driver can drive a specific head size without risk of ruining the driver or screw. High-Low Thread screws have an excellent holding power in wood due to their alternating high and low thread heights.Concrete Frame Screw Torx High-Low Thread ZYP 7.5 x 82mm Bag 10
Forgefix Hex Head Lightning Bolts provide a virtually stress-free fixing for close to edge applications. They are self-threading and allow quick and easy installation of most masonry fixing applications. They can simply be screwed into a pre-drilled hole, without the need for a sleeve or plug. The bolts are through-fixing, eliminating the need for marking and re-positioning. They have a high load capacity due to the thread interlocking into the base material. The bolts have an 'Elementech' coating for superior anti-corrosion, which has been salt spray tested to 1,000 hours. Applications: Widely used for fixing battens, balustrades, handrails, racking and holding down machinery, plus many more installation applications. Suitable for most masonry substrates including concrete and brickwork but also for hollow block or bricks due to the nature of the thread type anchoring along the total length of the fixing.Specifications: Size: M12 x 150mm.Pack quantity: 5.
The Faithfull Silicone Tape is a self-fusing tape that creates an airtight and moisture proof seal. This self-bonding wrap is manufactured from a special high quality silicone rubber compound which adheres to itself when wrapped under tension, forming a non-conductive, air and watertight seal. Silicone tape can safely be used in temperatures of up to 260°C and remains flexible down to -50°C. The tape can provide Insulation of up to 8000 Volts per unstretched layer or (400 Volts/mil) and has a tensile strength of 600psi. During application Silicone tape will stretch by up to 300% and will conform to irregular shapes. Tape contains no adhesive and leaves no residue when removed and resists UV light and weathering. It has hundreds of uses around the home, garden, garage, workshop, worksite and in marine applications. Ideal for carrying out emergency repairs, WRAS approved product. 1 x Faithfull Black Silicone Tape 25mm x 3m
The ForgeFix Spectre Screws are advanced multipurpose wood screws with double countersunk heads and pozi compatible recess. They have a sawtooth thread design to prevent splitting and reamer to prevent jacking. The screws have a zinc yellow passivated finish for excellent resistance to corrosion. The zinc yellow passivation process of electroplating is similar to the 'galvanised' and 'zinc plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish.Specification: Size: 6.0 x 40mmThread: Fully threadedPack Quantity: Box of 200
ForgeFix TechFast Cover Caps are specifically designed for use with TechFast Screws with an 8mm Hex head, 16mm or 19mm washers. Offers a concealed yet aesthetically pleasing finish where screws would normally be bare to the elements or the eye.These ForgeFix TechFast Cover Caps are suitable for self-drill screws with 19mm washers and an 8mm hex head. They come in the following: Colour: Olive GreenSize: 19mmPack Qty: 100
EpoxySET 105 is a three-part general purpose repair mortar based on epoxy technology. Formulated to withstand chemicals, impact and abrasion and can be used to repair concrete, screeds, stone, brick and steel in even the most demanding domestic and industrial situations. Epoxyset 105 is the ideal product for repairing floors, steps, kerbs and cills. Pack includes finishing solvent and gloves.
Rapid No. 36 precision cut, high-performance steel flat wire cable staples with rounded crown designed for securing low voltage cables up to a maximum of 6mm in diameter. The staples are made from strong galvanised wire with diverging points (DP), which makes the leg points go in opposite directions for extra strong bonding. For use with the Rapid R36 Cable Tacker. Size: 14mm Leg Length (divergent points).Type: White.Supplied as 5 boxes of 1,000 staples.
Stanley SharpShooter Type G heavy-duty staples. Also known as Type: 4, 11 or 140. Fits Stanley: 69-809, FMHT0-74997, TR60, TR100 series, TR200 series, TRE500 series, PHT150 and G11.1 x Pack of 1000 Stanley TRA708T Heavy-Duty Staples 12mm
Stanley SharpShooter Type G heavy-duty staples. Also known as Type: 4, 11 or 140. Fits Stanley: 69-809, FMHT0-74997, TR60, TR100 series, TR200 series, TRE500 series, PHT150 and G11.1 x Pack of 1000 Stanley TRA706T Heavy-Duty Staple 10mm
These Forgefix TechFast Roofing Screws are designed for use in joining timber to steel and for heavy section purlins. They have a Torx, countersunk head to sit flush to the surface. The self-drilling point enables speedy insertion, and the wings create a clearance hole in the timber to eliminate the chance of 'jacking' when fixing. The screws are zinc plated and have an 'Elementech' coating for superior anti-corrosion, which has been salt spray tested to 1,000 hours. These heavy section roofing screws are suitable for fixing timber to steel thicknesses of 6.0mm to 12.5mm. Each pack is supplied with a free Torx bit.The TFCH55109 TechFast Roofing Screws have the following specifications: Size: 5.5 x 109mm.Pack quantity: 50.
Pritt Stick is an excellent quality glue stick with high initial tack, and, thanks to the special airtight cap and tube system, the glue stick keeps fresh and can be used for several years. The glue is solvent free and washable at 30°. It can be applied smoothly and evenly, and allows sufficient time to reposition the object.The Large (43g) Pritt Stick is well-suited for frequent users and for gluing large areas.
Top-quality 0.050 wire staples for T50 and T55 tackers. Made from stainless steel to resist rust. For use with T50, T55, T50PBN, HT50P, HTX50, ETFX50, ETF50PBN, CT50K, 5700 and 8000.The Arrow ARRT5014SS T50 Staples - Stainless Steel 504SS come in the following:Box quantity: 1000Size: 6mm - 1/4 inch
Faithful Blue Poly Rope meets the needs of most trades and is suitable for a variety of applications in the home and workplace.Diameter : 8 mm.Length : 220 m.Breaking strain : 120 kg.
These Rawlplug Rawlbolt® Loose Bolts have the following specification: Size x Max. Fixture Thickness: M10 x 25mmOverall Length: 90mmDrill Ø: 11mmPack Quantity: Bag of 5
Forgefix TechFast Timber to Steel CSK/Wing Screws are used to join timber to steel frame buildings. The screws are fitted with breakaway wings that create a clearance hole to protect thread from engaging timber when drilling through. Breakaway wings will ream a hole, then break-off when they contact the metal surface to be drilled. The thread will then engage with metal. They have a TORX® compatible insert for a higher transmission of power. With improved countersinking from recessed ribs. Fire and corrosion resistant. Complies with EU Safety, Health and Environmental requirements.These Forgefix TechFast Timber to Steel CSK/Wing Screws have the following specification: Size: 4.8 x 38mmClamping Thickness: 21mmEffective Thread Length: 21mmPack Size: 200Drill Tip: No.3 No.3 drill tip for self-drilling heavy gauge steel up to 5mm
The ForgeFix Spectre Screws are advanced multipurpose wood screws with double countersunk heads and pozi compatible recess. They have a sawtooth thread design to prevent splitting and reamer to prevent jacking. The screws have a zinc yellow passivated finish for excellent resistance to corrosion. The zinc yellow passivation process of electroplating is similar to the 'galvanised' and 'zinc plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish.Specification: Size: 4.0 x 40mmThread: Fully threadedPack Quantity: Box of 1000
The ForgeFix Spectre Screws are advanced multipurpose wood screws with double countersunk heads and pozi compatible recess. They have a sawtooth thread design to prevent splitting and reamer to prevent jacking. The screws have a zinc yellow passivated finish for excellent resistance to corrosion. The zinc yellow passivation process of electroplating is similar to the 'galvanised' and 'zinc plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish.Specification: Size: 3.0 x 25mThread: Fully threaded.Pack Quantity: Box of 200
