These Forgefix Carriage Bolts are Zinc Plated, and ideal for timber to timber joining. They come complete with a hex nut and are fully threaded to 100mm. Also known as 'Cup Square Hex Bolts', the square underneath the Cup stops rotation of the bolt when tightening. Conform to DIN 603 and DIN 934 standards. Available in a comprehensive range of sizes to suit most applications. APPLICATIONUsed mainly for fastening timber to timber and is extensively used for timber joist construction in house building and numerous decking applications. A Carriage Bolt, also known as a Coach Bolt or as a ‘Fully Threaded Cup Square Hex Bolt’, has a domed or countersunk head, and the shank is topped by a short square section under the head. The square section grips into the part being fixed (typically wood), preventing the bolt from turning when the nut is tightened. A rib neck Carriage Bolt has several longitudinal ribs instead of the square section, to grip into a metal part being fixed. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.Carriage Bolt & Nut ZP M8 x 150 Bag 10
These Forgefix TechFast Hex Head Roofing Screws are designed for fixing cladding and sheet steel to light section steel purlins of between 1.2mm and 3.6mm. The screws have a hex head, are self-drilling and have a rubber washer which expands under pressure to form a permanent weather seal. They are zinc plated and have an 'Elementech' coating for superior corrosion resistance, which has been salt spray tested to 1,000 hours.The TFHL5575 TechFast Hex Head Roofing Screws have the following specifications: Size: 5.5 x 70mm.Pack quantity: 50.
The Arrow RL100 riveter is made of an all steel construction with comfortable vinyl grip. The spring-loaded handle allows for easy rivet loading and ejection, with the changeable nosepiece taking a 1/8 diameter rivet in one hole, and 5/32 and 3/16 diameter in the other hole. To change hole size simply loosen screw on nosepiece plate, swing pivot plate around then re-tighten screw.The kit includes an interchangeable nosepiece and a selection of 1/8, 5/32 and 3/16in rivets.
These Forgefix Multi-Purpose Pozi Screws with countersunk heads have a zinc yellow passivated finish for increased durability. The screws are immensely popular and versatile, and used in all trades including joinery, electrical and plumbing. Also widely used in DIY applications. APPLICATIONSuitable for use with many materials including PVCu, Timber, Chipboard, MDF, and other similar types. The Zinc Yellow Passivation process of electroplating is similar to the 'Galvanised' and 'Zinc Plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish, whilst having excellent resistance to corrosion. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have single threads, designed to offer higher pull out values and quicker insertion.Multi-Purpose Pozi Screw Countersunk ST ZYP 4.0 x 75mm Box 100
These Forgefix heavy-duty Form A Flat Washers are thicker than the more popular Form B type washers. They are bright Zinc Plated for increased corrosion resistance and conform to DIN 125 standards. Washers provide a smooth surface for the nut or bolt to bear on, making it less likely to loosen as a result of an uneven fastening surface. The main purpose of a washer is to distribute the load under a bolt head or the nut face. APPLICATION:On all manner of bolting applications. Can be used with all types of bolts and nuts. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.Flat Washer Heavy-Duty ZP M12 Box 10
The Rawplug Nylon Self-Drill Plasterboard Fixings require no drilling, simply pierce plaster and screw home. The nylon insulates against accidental electrical contact with a choice of panhead or countersink screws, flush fit finish. The Screw and fixture can be removed and re-used. (e.g. When decorating).Maximum Fixture Thickness: 12mmPack of 6.
High performance cavity fixings, ideal for fixing heavy objects securely on soft faced partition boards, plasterboard, hardboard & plywood. The screw and fixture can be removed and re-used. (e.g. When moving radiators for re-decoration) using a standard slotted or pozidriv screwdriver. A special setting tool (RAWAT88) is available for fast repetitive fixing. Typical uses: Coat hooks to hollow doors, shelves and bathroom accessories to standard plasterboard, radiators and kitchen cabinets to double thickness and tiled plasterboard.Size. M5 x 40mm.Drill Size. 10mm.Fixing Thickness 15mmPack Quantity. 100
These Forgefix Set Screws are made from grade 8.8 steel and are zinc plated for increased resistance to corrosion. They are fully threaded and conform to DIN 933 standards.Can be used with many Nut types and washers. APPLICATION:For fastening together numerous types of material or to be fastened in to pre-tapped holes.Widely used in many engineering applications. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.High Tensile Set Screw ZP M12 x 50 Bag 5
These Forgefix General Purpose Pozidrive Screws with Countersunk heads are zinc plated for increased durability. They are an extremely popular general purpose screw, and suitable for use in and with many materials. APPLICATION:Ideal for use in many ironmongery, electrical and plumbing applications.Can be used with various screw cover caps. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. The Pozidriv screw is similar in appearance to the classic Phillips cross-head, but in fact is very different. The Pozidriv has four additional points of contact, and does not have the rounded corners that the Phillips screw drive has. The biggest advantage it offers is that, when used with the correct tooling in good condition, it does not cam out, allowing great torque to be applied. The Pozidriv screw can easily be distinguished by a line embossed in the screw head at 45° to the slots for the driver. The countersunk head is designed to sink flush with substrates to leave a smooth surface finish. They have twin threads, which enable an easy start when driving. Imperial Size > MetricNo.4 = 3.0mm, No.6 = 3.5mm, No.7 = 3.9mmNo.8= 4.0mm, No.10 = 5.0mm, No.12 = 6.0mmGeneral Purpose Pozi Screw Countersunk TT ZP 2 x 12 Box 100
The Faithfull pack of 4 x 8mm joining links for use in conjunction with plastic chain. Available in black or white.The Faithfull FAICHPJLW plastic joining links are white and 8mm in thickness.
These Faithfull heavy-duty 50mm wide ratchet straps are designed to secure really heavy loads. Manufactured from from a 50mm wide triple layer Terylene webbing they are weatherproof, cut and abrasion resistant. The ratchet and J style fixing hooks ensures that loads are secured quickly and efficiently and provide ease of use. Both the 5 and 8 metre lengths have a breaking strain of 4,000kg/daN and a working load of 2000kg/Dan Pack quantity: 1. Manufactured in accordance to EN12195-2 NOTE: WEIGHT OF CARGO MUST NOT EXCEED THE WORKING LOAD LIMITThe Faithfull FAITDTRUCK52 has the following specifications:Length: 5mWidth: 50mmBreaking strain: 4,000kg/daN Maximum working load: 2000kg/daN
Forgefix TechFast Roofing Sheets to Steel Hex Screws are used for joining metal roofing panels to steel frame buildings. The screws are fire resistant and corrosion resistant. Protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours. Complies with EU Safety, Health and Environmental requirements. They are supplied with 16mm EPDM rubber washers.These Forgefix TechFast Roofing Sheets to Steel Hex Screws have the following specification: Size: 5.5 x 100mmEffective Thread Length: 83mmPack Size: 100Drill Tip: No.3 No.3 drill tip for self-drilling in heavy gauge steel up to 5mm.
Gorilla Glue 5 Min 2-Part Epoxy Syringe has an impact-tough formula and uses hybrid technology to improve overall adhesion, strength, and flexibility. It fills voids and bonds uneven and vertical surfaces and has a 5-Minute set time, allowing time for repositioning. The epoxy withstands moderate exposure to water and will not break down from exposure to common solvents. It has a Low VOC and is non-toxic once cured, safe for everyday handling. Size: 25ml.
These Faithfull Ratchet Tie-Downs are manufactured from a 25mm wide triple layer Terylene webbing which is weatherproof, cut and abrasion resistant. The ratchet and S style hooks ensures that loads are secured quickly and efficiently and provide ease of use. Length: 5m. Width: 25mm. Breaking Strain: 600kg/daN. Maximum Working Load: 300kg/daN. Manufactured in accordance to EN12195-2. NOTE: WEIGHT OF CARGO MUST NOT EXCEED THE WORKING LOAD LIMIT Pack quantity: 4.
The ForgeFix TechFast Masonry Hex Screw is a self-tapping, no stress alternative to plastic plugs. With an easy 2-step installation: drill a hole in substrate and screw in with a power tool. These screws have an 8mm Hex head with TORX® compatible recess. Protected by an Elementech coating, fire and corrosion resistant. Salt spray tested to 1,000 hours. Complies with EU Safety, Health and Environmental requirements. Supplied with a T27 Impact Bit.Specification: Size: 6.3 x 45mmHead Type: 8mm HexPack Quantity: Box of 100
These ForgeFix traditional slotted, twin thread Wood Screws have countersunk heads and can be used in many internal and external applications. They have a solid brass construction to avoid corrosion. APPLICATION:Used for both decorative applications and in applications where the screw may come in to contact with the elements avoiding corrosion. Can be used with all manner of wall plugs. Slotted screw driver required. With Slotted screwdrivers it is important to ensure that the tip matches the width of the screw slot, otherwise you run the risk of damaging the screw head. Slotted screwdrivers are available with either Flared or Parallel tips. For the majority of uses the Flared tip is ideal but if the screw needs to be driven below the material surface a Parallel tip screwdriver should be used. Raised head screws have both countersunk and raised structure, which is designed for aesthetic purposes on all types of ironmongery and lighting applications. The single threads have been designed to offer higher pull out values and quicker insertion.Wood Screw Slotted Raised Head ST Solid Brass 5/8 x 6 Box 200
The Faithfull plastic posts can be used in conjunction with plastic chain and bases. A simple, easy way of restricting or managing areas both inside and outside. The posts have the following dimensions: Size: 860mm high by 40mm diameter. Please note bases are sold separately.The Faithfull FAICHPOSTYB plastic post for chain has the following specifications:Colour: Black and yellow.
The Forgefix Hex Head Stitching Screws are designed specifically for joining cladding sheets together. They have a Hex head and a self-drilling point which enables speedy insertion. The rubber washer beneath the aluminium flange expands under pressure to form a permanent weather seal. The screws are zinc plated and have an 'Elementech' coating for superior corrosion resistance, which is spray tested to 1,000 hours. They can join up to 3 sheets of 0.7mm thickness. Specifications:Size: 6.3 x 22mm.Pack quantity: 100.
These Faithfull Quick Repair Links are ideal for use where temporary but secure fastenings are required. The connection is made by the hexagon locking collar.The links are resistant to corrosion, thanks to their finish. Chain accessories should never be used for any overhead lifting, load binding or towing applications.These Faithfull Quick Repair Links have the following specification: Finish: Zinc Plated.Diameter: 3.5mm.Inside Link: 28 x 10mm.Pack of 4.
This Faithfull Ratchet Tie-Down is manufactured from 25mm wide triple layer Terylene webbing which is weatherproof, cut and abrasion resistant. The ratchet and S style hooks ensures that loads are secured quickly and efficiently and provide ease of use. The tie downs meet the following specifications: Length: 5m.Width: 25mm.Breaking Strain: 600kg/daN.Maximum Working Load: 300kg/daN.Quantity: 2 Piece. Manufactured in accordance to EN12195-2.NOTE: WEIGHT OF CARGO MUST NOT EXCEED THE WORKING LOAD LIMIT
The BlueSpot Tools Snap Clip Bungee Cords are designed to provide quick convenient load binding for use around the home and workplace. The 10mm diameter heavy-duty elastic cord provides excellent holding power and constant tension. The two high strength spring-loaded snap clips allow for safe and secure load binding.The BlueSpot Tools Snap Clip Bungee Cord has the following specification: Length: 120cm.Maximum Stretch: 180cm.
Silver Gorilla Tape is extra thick, extra strong and extra durable, which makes it ideal for repairing heating, ventilation or air-conditioning ducts. Suitable for indoor and outdoor use, with superior UV resistance and ability to grip to rough, uneven, unforgiving surfaces such as wood, stone, plaster, brick and more.1 x Gorilla Glue Gorilla Tape Silver 48mm x 11m
Faithfull Lifting Slings are made from 100% PES polyester duplex webbing that is lightweight but extremely durable for use on awkward loads, offering a soft alternative to wires and chains. All sizes can be used in straight pull, basket or choke configurations. Fitted with a reinforced, sleeved lifting eye. Meets the requirements of EN 1492 Part 1:2000. Minimum breaking load is 7 times the Working Load Limit.The Faithfull Green Lifting Sling has the following specifications: Max Load: 2 Tonne.Width: 60mm.Length: 3m.
Arrow HTX50 Professional Hammer Tacker with steel construction, jam resistant mechanism and precision locked rear loading. It has an ergonomic soft rubber grip for easy all day use, a recessed hand grip which protects the hand from scraping, surface guard flange which reduces damage to surface and a knuckle guard which avoids surface impact on hand. Holds two full strips of Arrow T50 Staples: 8, 10 and 12mm.
Evo-Stik Reswin W is a fast setting, extra strong wood adhesive is ideal for interior use. Dries to a clear finish that can be sanded, painted or stained. Resin wood glue is suitable for all types of wood and will set stronger than the wood itself. No mess, clog-free nozzle and twist to seal cap, all designed in a handy anti-roll bottle. Bonds: wood, hardboard, chipboard, blockboard, cardboard, paper, textiles.Size: 125ml.
Faithfull 'D' shackles, also known as chain shackles, are versatile fittings that have many uses. Ideal for fixing or joining lengths of chain or coupling hooks, often used in conjunction with rope for marine and equestrian use. Heavy-duty construction with threaded pin enclosure. Chain accessories should never be used for any overhead lifting, load binding or towing applications.These Faithfull D Shackles have the following specifications: Body ;& ;Pin size: 8mm. ;Inside Length & Width: 30 x 16mm. ;Finish: Stainless Steel.Quantity: 1.
The Faithfull lightweight oval chains are suitable for a variety of domestic household applications. Available in either a polished brass or chrome plated finish. Supplied in 10 metre reels.The Faithfull FAICHOC23 Oval chain is made from brass with a chrome plated finish, with the following specifications: Link Diameter: 2.3mm.Link Length: 16mm.Length: 10m.
Faithfull Lifting Slings are made from 100% PES polyester duplex webbing that is lightweight but extremely durable for use on awkward loads, offering a soft alternative to wires and chains. All sizes can be used in straight pull, basket or choke configurations. Fitted with a reinforced, sleeved lifting eye. Meets the requirements of EN 1492 Part 1:2000. Minimum breaking load is 7 times the Working Load Limit.The Faithfull Green Lifting Sling has the following specifications: Max Load: 2 Tonne.Width: 60mm.Length: 2m.
Gorilla Heavy-Duty Grab Adhesive is the all-purpose way to bond building materials. Extremely versatile, it grabs and bonds virtually anything instantly. Suitable for use indoors or out, even underwater for an extra-tough bond that will last. Its flexible, easy flow formula means it can even be used for gap filling plus it is paintable.
Forgefix TechFast Composite Panels to Steel Hex Screws are used to join composite panels to steel frame buildings. They have a specially designed compression control thread to prevent damage and denting of panels. They are fire and corrosion resistant, protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours. Complies with EU Safety, Health and Environmental requirements. They are supplied with 19mm EPDM rubber washers.These Forgefix TechFast Composite Panels to Steel Hex Screws have the following specification: Size: 5.5 x 150mmInsulation Thickness: 57-115mmPack Size: 100Drill Tip: No.5 No.5 drill tip for self-drilling in heavy gauge steel up to 12.5mm.
Plasplugs specialised, Hollow Door Fixings are ideal for fitting coat hooks, name plates and other fixings to the narrow gauge of hollow doors and panels. These tough, compact fixings have a rivet type action that grips the inside of the panel. Expanding wings grip securely in hollow doors, thin skin partitions, plywood and fibreglass. Multi-thread technology ensures superior holding power, ideal for the home, boat and caravan. Accepts No. 6 Screws.Drill size: 6mm.Supplied in a pack of 5.
The Rapid waterproof rivets are ideal for use in humid areas. They are made from high grade aluminium and the head of the rivet is made of 1 single part to prevent leakage between the 2 parts when they are fixed together. The rivets are ideal for applications that require a waterproof fixing, such as on waterspouts, gutters, shower panels and greenhouses. Each pack is supplied with a drill bit.Specifications:Size: 4 x 16mm.Grip range: 9-12mm.Pack: Blister of 50.
