Pink Grip is a revolutionary direct bond adhesive specifically formulated for the professional user, using polymers at the leading edge of adhesive technology. Pinkgrip will stick just about anything on a building site that needs sticking. Its amazing grabbing strength not only removes the need to pin under the work piece to prevent slumping, but its revolutionary initial Direct Bond eliminates the need for double stick methods. Pinkgrip can be used inside and outside and adheres to just about every building substrate, providing the following key benefits: - Enhanced slump resistance for quick and simple direct bonding to most substrates without the use of temporary supports in most applications. - Excellent early and ultimate adhesive strength on porous substrates. - Excellent gap filling properties to accommodate uneven surfaces. - Good nip off qualities to prevent messy stringing of the adhesive Size: 350ml cartridge.
Everbuild Black Jack® 908 D.P.M. is a ready-to-use, odourless, rubber enriched bitumen emulsion that provides a highly effective sandwich damp-proof membrane for floors. It also acts as a waterproofer for walls, above ground structures and foundations. It can also be used as an adhesive for wood block, mosaic panels, insulation boards, expanded polystyrene, cork and as a plaster bonding agent, even on difficult surfaces. Suitable for internal and external use.
The Everbuild Industrial Superglue is a medium viscosity formula that can fill gaps to 0.1mm. This Everbuild product is a very strong industrial superglue that is ideal for use on perfect fit surfaces where fast setting is required. It bonds non-porous surfaces like, plastics, metals, glass, PVCu, rubber and EPDM and has a viscosity at 25° c of 100cps and a setting time of 5 to 15 seconds so you will get the job in hand done quickly and with a professional finish.Size - 50 g.
The Everbuild Aluminium Tape is made from heat and light reflective Aluminium Foil. It is heat resistant to 180°C and flame retardant to Class O. It has excellent moisture resistance, and is ideal for use as a vapour barrier between foil faced insulation panels in roof and wall applications, duct sealing on all types of air conditioning and ventilation and protecting wires and pipes from heat. Available in 3 sizes.Everbuild Aluminium Tape Size: 50mm x 45m.
The Everbuild Stixall Extreme Power Easi Squeeze is a one part, chemically curing solvent-free sealant and adhesive combining the best qualities of silicone and polyurethane technologies. It is specifically designed for adhering most common building surfaces to each other and themselves Incredible initial grab, non-slip and gap filling properties with a high bonding strength for interior and exterior use. It offers excellent primer less adhesion to most surfaces, including metals, most plastics, glass, concrete, plaster, plasterboard, polyester, Perspex, glass, wood, enamel, painted surfaces etc It can be applied to wet surfaces and is totally waterproof and weatherproof. It contains a powerful biocide that prevents mould growth. Stixall is permanently flexible with 20% movement accommodation and resistant to chemicals and petrol (10% dilute acids/alkalis, most solvents). It is also non-staining on sensitive materials such as marble and granite. Resistant to temperature extremes of -40°C to +150°C.1 x Everbuild Stixall Extreme Power Easi Squeeze Crystal Clear 80ml
Everbuild Stixall Extreme Power Cartridge is a one part chemically curing, solvent free sealant and adhesive combining the best qualities of silicone and polyurethane technologies. It is specifically designed for adhering most common building surfaces to each other and themselves. The Stixall range comes in 6 colours: white, clear, black, brown, natural and grey and has an incredible initial grab, non-slip and gap filling properties with a high bonding strength. The range can be used for interior and exterior use. It can also be applied to wet surfaces, when cured the product is totally waterproof and weatherproof and can be over paintable if required. This Stixall range is also impregnated with a powerful biocide that prevents mould growth, while still being solvent free. Stixall is resistant to temperature extremes -40° C to +150° C, non staining on sensitive materials like marble or granite, permanently flexible - 20% movement accommodation and is resistant to chemicals and petrol (10% dilute acids/alkali's, most solvents). Everbuild Stixall has excellent adhesion to most surfaces, including metals, most plastics, glass, concrete, plaster, plasterboard, polyester, Perspex, glass, wood, enamel, painted surfaces etc. Sealing and bonding in almost every application imaginable. The following are just some examples.As a high quality nail replacement adhesive, even to damp surfaces.External and internal perimeter pointing around doors and windows, especially in mobile structures such as caravans and boats.Bonding mirrors to most common substrates.Automotive gap filling and sealing.Sealing and bonding marble and granite where non-staining is essential. Sealing vertical expansion joints.Jointing cladding panels.Bonding difficult materials such as specialised polymer systems, metals and fibreglass.Any application requiring high performance, durable sealing and bonding of joints.Applications where resistance to chemical spillage is required (garage forecourts etc).Use on overhead applications - Always use in conjunction with mechanical fixings.Use in conjunction with mechanical fixings for glass block fitting or large mirrors (>0.5m2 total area). For heavy items, provide temporary support until adhesive has dried. Do not seal mirror edges/plastic sheeting until adhesive has cured.Do not use on surfaces that bleed oils or plasticisers.It is the user's responsibility to determine suitability for use. If in doubt, please contact the Everbuild Technical Services Department for advice.Not for use where joints are constantly immersed in water, or as part of a structural glazing system.Not for use in aquarium manufacture. Not for use in conjunction with bitumen, or asphalt. Size: 290ml.Colour: Black.
J-B Weld Original Cold-Weld trade; Epoxy provides strong lasting repairs for metal, plastic, pvc, wood, fibreglass and ceramics. This original formula is known throughout the automotive industry as the Original Cold-Weld trade;. Cures consistently, no shrinkage/foaming. It can be sanded, drilled or tapped once set. Resistant to water, chemicals and heat. Great for: household repairs, automotive, plumbing, marine, crafts, brick, concrete and fibreglass. Specifications: Bonding Strength: 5,020 PSI.Set Time: 4-6 Hours.Cure Time: 15-24 Hours.Colour When Dry: Dark Grey. 1 x J-B Weld Original Cold-Weld trade; Epoxy 2 x 148ml.
This Forgefix Sanitary Fixing Kit is extremely easy to fit with push-through fixing. The edge of the plug cleanly closes off the drill-hole in the porcelain and enables the cap to snap fit securely. The zinc screw with hexagon and part flat shank enables straight forward installation.The Fixing is strong and reliable and the decorative caps leave an attractive, clean finish. APPLICATION:Designed for fixing sinks and basins.Sanitary Ware Fixing White Cap M8 x 100 1 Pair
Spectre by Forgefix incorporates a long list of advanced screw features, often only found in premium screws, into what we've named advanced multi-purpose wood screws. They feature a countersunk, pozidrive compatible, recessed head. Fully threaded, up to 50mm, with a sawtooth thread, to prevent splitting and reamer to prevent jacking (50mm and above). They are also surface hardened with a quick start type 17 slash point. The screws have a zinc yellow passivated finish for excellent resistance to corrosion. Zinc yellow passivation process of electroplating is similar to the 'galvanised' and 'zinc plated' processes, with the addition of a yellow dye. It offers an aesthetically pleasing finish. CE approved for use in load-bearing timber construction. The tough compartment case contains: 130 x Spectre PZ Compatible Wood Screws 3.5 x 25mm. 190 x Spectre PZ Compatible Wood Screws 3.5 x 30mm. 130 x Spectre PZ Compatible Wood Screws 4.0 x 20mm. 185 x Spectre PZ Compatible Wood Screws 4.0 x 25mm. 150 x Spectre PZ Compatible Wood Screws 4.0 x 30mm. 110 x Spectre PZ Compatible Wood Screws 4.0 x 40mm. 80 x Spectre PZ Compatible Wood Screws 4.0 x 50mm. 60 x Spectre PZ Compatible Wood Screws 5.0 x 50mm. 65 x Spectre PZ Compatible Wood Screws 5.0 x 70mm.
DuPont Insta Stik™ is a polyurethane foam adhesive which can be used to fix plasterboard, insulation board and most common building substrates quickly and easily. There are no tools or mixing required and no bags of heavy dry wall adhesive.
High performance cavity fixings, ideal for fixing heavy objects securely on soft faced partition boards, plasterboard, hardboard & plywood. The screw and fixture can be removed and re-used. (e.g. When moving radiators for re-decoration) using a standard slotted or pozidriv screwdriver. A special setting tool (RAWAT88) is available for fast repetitive fixing. Typical uses: Coat hooks to hollow doors, shelves and bathroom accessories to standard plasterboard, radiators and kitchen cabinets to double thickness and tiled plasterboard.M4 x 38mm.Drill Size. 8mmFixing Thickness 20mm Trade Pack of 20.
J-B Weld SuperWeld is a specially formulated cyanoacrylate Super Glue that provides a strong, instant bond in just seconds. It works on multiple and hard to bond surfaces. Its exceptionally high strength provides a permanent repair to almost anything. Ideal for a wide variety of applications; ceramics, glass, rubber, plastics, metal, wood and leather.Specifications:Strength: 3100 PSISet Time: 1 minuteCure Time: 1 hourColour When Dry: Clear
J-B Weld KwikWeld trade; is a fast-setting version of the original J-B Weld two-part epoxy Cold-Weld trade; system which provides strong, lasting repairs to metal and multiple other surface types. Sets within minutes and cures within just a couple of hours. Resistant to water, chemicals and heat. Cures consistently, no shrinkage/foaming. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. Specifications: Bonding Strength: 2,424 PSI.Set Time: 6 Minutes.Cure Time: 4-6 Hours.Colour When Dry: Dark Grey.Size: 25ml.
The Everbuild Lumberjack 5min Polyurethane Wood Adhesive offers exceptional bond strength to wood and most common building surfaces. Suitable for bonding all common wood types (hard, soft, exotic, painted). It will also bond Formica, polystyrene, PU foam, metal and glass wool and various plastics (including PVC) to porous surfaces. These products also adhere to stone, concrete, brick and masonry. Products foam slightly on application to fill small gaps and increase overall bond strength. Suitable for both internal and external use, with excellent weathering and ageing properties. They are also resistant to chemicals. Conforms to EN 204. D4 Strength. Areas For Use • General wood jointing and construction• Window and door frame manufacture• Door manufacture• Furniture manufacture• Construction of staircases and ladders• As a high quality insulation adhesive for foam/glass wool/fibre boardingThe Everbuild Lumberjack 5min Polyurethane Wood Adhesive Gel is a thixotropic, transparent, gap filling gel which sets hard in just 5 minutes. Particularly suitable for equipment manufacture and production line applications where rapid handling is required. Conforms to EN 204. D4 Strength.
J-B Weld MarineWeld trade; is a specially formulated two-part Cold-Weld trade; adhesive system which provides strong, lasting repairs for bonding different or similar surfaces, such as metal, composites, fibreglass, and others. Sets in 4-6 hours at room temperature and is fully cured to a dark grey color in 15-24 hours. Once cured, it can be shaped, tapped, filed, sanded and drilled and will retain its strength above or below the waters rsquo; surface. It's also resistant to petroleum, chemical and acid. Specifications: Bonding Strength: 3,960 PSI.Set Time: 4-6 Hours.Cure Time: 15-24 Hours.Colour When Dry: Dark Grey.Size: 2 x 30ml.
J-B Weld MarineWeld trade; Epoxy Syringe is a specially formulated two part Cold-Weld trade; adhesive system providing strong, lasting repairs for bonding different or similar surfaces, such as metal, composites, fiberglass and others. Resistant to water, chemicals and UV. This innovative epoxy can be used for underwater applications once cured. At full cure it can be shaped, tapped, filed, sanded and drilled, retaining full strength above or below the waters' surface. Specifications: Bonding Strength: 3,200 PSI.Set Time: 20 Minutes.Cure Time: 15-24 Hours.Colour When Dry: White.Size: 25ml.
1 x Loctite Super Glue Power Gel Tube 20g. Loctite Super Glue Power Gel is formulated with cyanoacrylate rubber-infused gel formula, this instant glue allows powerful bonds which are extremely precise even on vertical surfaces and materials requiring high flexibility. Strong resistance with instant strength in a single drop, this super glue ensures durability whilst drying transparently. This multi material glue works on a variety of materials: wood, rubber, plastic* and more. It even works as a leather glue. The adhesive not only withstands strong conditions but is also shock resistant, waterproof and heatproof. Before starting, ensure the surfaces you want to bond are clean, dry and close-fitting. Simply remove the cap and apply a small quantity of the power glue gel to one surface, press both surfaces together immediately and hold them in place until the bond sets. Simple! *except polyethylene (PE) or polypropylene (PP). 20g
A smooth paste which has been developed for use when installing or repairing pipework for water, heating and gas services etc.Water soluble, this flux is manufactured in line with the recommendations of MARC, offering good penetration of surface oxide with no pre-cleaning necessary.Size: 100g.
Bondloc B2001 is a hand kneadable, specialty epoxy putty that mixes in 1 minute for permanent repairs to many substrates. Contains fading black dye that becomes grey after mixing. May be applied under water (fresh or salt). Bonds to fibreglass, metal, wood, concrete and glass. Will not yellow to UV exposure. Hardens in 10 minutes, back in service in an hour, full strength in 24 hours. Can be used for repairing tanks and drums, patching holes in pipes, stopping leaks and repairing porosity holes in castings. Specification: Typical Properties: 7 days cured at 24°CColour: Black, changes to grey after mixingViscosity: putty/hand kneadablePot Life @24°C: 20 minutesComprehensive Strength: 83 N/mm2Adhesive Tensile Shear: 5 N/mm2Cured Hardness Shore: D 75Dielectric Strength: volts/mil 300Solids: 100%Temperature Resistance: Wet: 49°C, Dry: 121°CSize: 50g
Bondloc B222 Screwlock is a Thixotropic anaerobic threadlocker of low strength designed for easy disassembly of treated components. B222’s Anaerobic nature allows it to cure only when confined between metal parts. Applications include all small fasteners, where vibration loosening prevention and non-leakage through threaded fastening is required. Ideal on small set screws, brass and most types of small threaded nuts, bolts, screws, hex and slot driven components including keyed fasteners etc. Specifications: Resin: DimethacrylateColour: Purple White tintCure speed with Activator: <15 mins @ 20°CCure speed without Activator: 15 minutesViscosity- Brookfield Sp3 @ 20rpm: 1200 cps (thixo), Sp3 @ 20rpm: 5000cpsGap Fill/Max Threadform: 0.5mm/M36Flash Point: >100°CShelf Life: 12 months @ 20°CSpecific Gravity: 1.06 Cured performance: Full Cure Time: 12 hours @ 20°CTypical Strength: ISO 10964: 6Nm M10’sRange of Strength: Breakaway: 4Nm up to 12Nm, Prevailing: 2Nm up to 6 NmDIN 54454 Breakloose: 10Nm max 20NmDIN 54454 Prevailing: 6Nm up to 20NmBondloc Screwlock Low Strength Threadlocker Size: 10ml.
Bondloc B2060 is a 60 second, 2-part, rapid cold curing epoxy adhesive. It is suitable for bonding a wide variety of surfaces including steel, aluminium and galvanised iron. It reacts within a minute to give a tough resilient bond on a wide variety of surfaces. Specifications: Mix Ratio 1:1Work Life as a Mix: 40 - 70 secondsSize: 25ml Part 1 Physical Form: Viscous liquidChemical Type: EpoxyAppearance: ClearViscosity @ 25°C: 100 poiseSpecific Gravity: 1.17 Part 2 Physical Form: Viscous liquidChemical Type: Mercaptan and PolyamideAppearance: BlueViscosity @ 25°C: 130 PoiseSpecific Gravity: 1.14
Bondloc B480 is a black rubber toughened Cyanoacrylate that bonds metals, plastics, wood, ceramics, rubber, leather, card, glass and many other materials. Cyanoacrylate adhesives cure through reaction with moisture held on the surface to be bonded. They need close fitting joints and usually solidify in seconds which has resulted in the universal generic name of 'Superglues'. Curing is started by the film of moisture found on most surfaces which is usually slightly alkaline and it is this alkalinity which causes the polymerisation. Most grades have varying viscosities and therefore they need close fitting joints. Newer developments of gelled variants allow cure in wider gaps and application to vertical surfaces. Cyanoacrylates are suited to small plastic parts and to rubber bonding. Liquid Properties:Ester base: Ethyl cyanoacrylateAppearance: Black Opaque LiquidSpecific Gravity: 25°C 1.06 g/cm²Shelf life: 6 months unopenedViscosity @ 25°C: 350 - 450 mPasSize: 20g
Bondloc B542 Hydraulic Seal is a thixotropic liquid which cures anaerobically to form a tough, high pressure seal on all types of threaded couplings used on low, medium and high pressure lines. Used for all types of hydraulic connections, and sealing against typical pressure line ratings. Can also be used to fit valves, threaded couplings, adaptors, quick disconnect parts, compression fittings and vibration proofing joints. Specifications: Resin: Dimethacrylate.Colour: Brown.Fixture Speed No Activator: 10 - 20 mins. Fixture Speed With Activator: <5 mins. Spindle 2 @ 2.5 rpm: 1000 to 2750 cps.Spindle 2 @ 20rpm: 400 to 800 cps.Gap fill: 0.05mm to 0.25 mm.Flash point: >100°C.Shelf life: 2 Years @ 20°C.Specific gravity: 1.06.Max operating temp: -55°C to + 150°C. Cured Performance: Full Cure Time: 12 hours.Typical breakway ISO 10964: 15 N.m.Typical prevailing ISO 10964: >8 N.m.DIN 10964 Breakloose: 24 N.m.DIN 10964 Prevailing: 15 to 35 N.m.Typical Break and Prevailing: 20N.m/15N.m.Bondloc Hydraulic Seal Pneumatic Fittings. Size: 50ml.
J-B Weld MirrorWeld is a specially formulated adhesive specifically designed to bond rear view mirrors to windshields. It can be used to install new mirrors, as well as re-attach existing mirrors that have fallen off. Its exceptionally high strength provides a permanent repair to almost anything. Resists impact, moisture, humidity, heat and vibration. Specifications:Set Time: 1 MinuteCure Time: 1 HourColour When Dry: ClearSize: 2g
Jubilee® clips are Kite marked to BS5315 (1991) and the company is licensed to ISO 9001. Made from mild steel, zinc protected and used for fixing flexible rubber hoses, metal tubes etc.Size OOOAdjustment . 9.5 - 12mmAdjustment. 3/8 - 1/2in
A solvent free, white version of the brand leading Pinkgrip Direct Bond Adhesive. It has all the unique benefits of Pinkgrip and will stick just about anything on a building site without the need for underpinning, thanks to the product's no-slump formula.
The Everbuild Lumberjack 30min Polyurethane Wood Adhesive offers exceptional bond strength to wood and most common building surfaces. Suitable for bonding all common wood types (hard, soft, exotic, painted). It will also Formica, polystyrene, PU foam metal and glass wool and various plastics(including PVC) to porous surfaces. These products also adhere to stone, concrete, brick and masonry. Products foam slightly on application to fill small gaps and increase overall bond strength. Suitable for both internal and external use, with excellent weathering and aging properties. They are also resistant to chemicals. Conforms to EN 204. D4 strength. Areas For Use • General wood jointing and construction• Window and door frame manufacture• Door manufacture• Furniture manufacture• Construction of staircases and ladders• As a high quality insulation adhesive for foam/glasswool/fibre boardingEverbuild Lumberjack 30 Minute Polyurethane Wood Adhesive Gel is a thixotropic, transparent, gap filling gel which sets hard in 30 minutes. Conforms to EN 204. D4 Strength.
Bondloc B3294 is a toughened structural adhesive formulated for bonding dissimilar substrates as well as unprepared metals, ceramics, wood, concrete and standard thermoset plastics. The final adhesive bond is designed to be load bearing and resistant to weathering, humidity and wide temperature variations. Outdoor weathering or solvent exposure thermoformed plastic assemblies, PVC, fibreglass, vinyls, ABS, steel aluminium, stainless steel, acrylics, phenolic, polycarbonate, styrenics, Noryl, PET, wood, concrete and ceramic magnet and speaker assembly. Specifications: Viscosity: 55,000cpsColour: Off whiteWeight: 8.44 lbs/galMixed Density: 8.28lbs/galFlash Point: 51°FMixed Viscosity: No sagging gelOpen Time: 3 minutes @ 72°F, 22°CAssembly Time: 6 minutes @ 72°F, 22°CFunctional Cure: 3/4-1 hourFull Cure: 4 hoursSolvents: NoneCoverage: (based on 25ml) 152 sq.in @ 0.010in
This Plumber Fix is purpose designed as a permanent leak sealant for piping and tanks. Ideal for sealing weeping, sweating and burst metal pipes, radiators, tanks and many more!113g tube.Options for copper or steel available
1 x Sylglas Plumber Fix Steel 113g SYL100002941
J-B Weld PlasticBonder trade; is a quick-setting, two-part, urethane adhesive system providing strong and lasting repairs. Works on thermoset, carbon fibre composites, thermoplastics, coated metals, concrete and more. It works well as a gap filler and will fill dents and scrapes in plastic components. Resistant to water, chemicals and heat. Specifications: Bonding Strength: 3,770 nbsp;PSI.Set Time: 15 Minutes.Functional Cure: 30 Minutes.Size: 25ml. 1 x J-B Weld PlasticBonder trade; Syringe Tan 25ml.
J-B Weld HighHeat trade; Epoxy Putty is specifically formulated to bond and repair materials exposed to high temperatures in automotive and industrial maintenance applications. It cures to a tough, hard bond with little to no shrinkage. This industrial-strength product outperforms conventional epoxy putties at high temperatures, and sets in 1 hour at room temperature. After 8 hours, it can be drilled, tapped, machined, ground, filed and painted. Offers exceptionally high strength in continuous 232 deg;C (450 deg;F) and up to 260 deg;C (500 deg;F) intermittent. Resistant to water, chemicals and heat. Specifications: Bonding Strength: 800 PSI (600 PSI at 400 deg;F).Temperature Resistant: up to 232 deg;C (450 deg;F) or 260 deg;C (500 deg;F).Set Time: 1 Hour.Cure Time: 8 Hours.Colour When Dry: Machine Grey.Size: 57g.
