ForgeFix ForgeFast Wood Screws have a universally accepted, Torx® compatible drive. Their recessed ribs provide improved countersinking and reduced surface dust, and their reinforced countersunk necks improve holding power. The screws have a patented drill and drive thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber, increased pull-out and a firmer fix. A sharp point provides faster bite and is capable of piercing 0.8mm steel. The screws have an 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is Salt Spray tested to 400 hours. The screws are suitable for interior use. Every box is supplied with a Torx® compatible bit.Size: 3.0 x 16mm.Box quantity: 200.
These ForgeFix ForgeFast Wood Screws have a universally accepted, Pozi compatible drive. They have 6 underhead lobes for improved countersinking and reduced surface dust, and reinforced countersunk necks which improve holding power. The screws have an anti-friction thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber and improved drawing strength. The thread is serrated for improved pull-out and reduced torque when inserting the screw. The double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel. The screws have an 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is salt spray tested to 400 hours. The screws are suitable for interior and exterior use. Every tub is supplied with a Torx® compatible bit.Size: 5.0 x 40mm.Pack quantity: 800.
The ForgeFix Dome Head Rivet has a steel-plated stem and Aluminium head which provides a neat appearance with a low profile. This rivet is the most versatile and commonly specified head style. The dome head has a diameter double that of the rivet body providing more than sufficient bearing surface to retain all but the extremely soft or brittle materials.The rivet assembly is inserted into a hole drilled through the parts to be joined together and can be finally fixed by use of a hand held or pneumatic rivet gun.
These Faithfull welded steel chains are made with the link side welded for extra strength. They have mild steel welded straight links made to form an A style short link chain. The chains are bright zinc plated and ideal for general purpose applications such as securing loads. Maximum load figures quoted are for guidance only. These chains are test load tested, but not certified and should never be used for any overhead lifting, load binding or towing applications.The Faithfull FAICHAL525C A link chain has the following dimensions:Thickness: 5mmLength: 25m
These Faithfull welded steel chains are made with the link side welded for extra strength. They have mild steel welded straight links made to form an A style short link chain. The chains are bright zinc plated and ideal for general purpose applications such as securing loads. Maximum load figures quoted are for guidance only. These chains are test load tested, but not certified and should never be used for any overhead lifting, load binding or towing applications.The Faithfull FAICHCUT50Z Zinc Plated Chain has the following specifications:Size: 5.0mm x 2.5mFinish: Zinc
The Faithfull S-Hooks are made from low carbon steel and zinc plated for resistance to corrosion. The hooks are ideal for attaching accessories to chain when low working loads are involved. These Faithfull S-Hooks have the following specifications: ; Diameter: 3mm. Length: 34mm. Inside Eye Diameter: 11mm. Quantity: 20.
The Faithfull S-Hooks are made from low carbon steel and zinc plated for resistance to corrosion. The hooks are ideal for attaching accessories to chain when low working loads are involved. These Faithfull S Hooks have the following specifications: ; Diameter: 6mm.Length: 60mm.Inside Eye Diameter: 18mm.Quantity: 6.
The Faithfull lightweight oval chains are suitable for a variety of domestic household applications. Available in either a polished brass or chrome plated finish. Supplied in 10 metre reels.The Faithfull FAICHOC18 Oval chain is made from brass with a chrome plated finish, with the following specifications: Link Diameter: 1.8mm.Link Length: 13mm.Length: 10m.
These Faithfull Welded Chains are manufactured from a mild steel with a Black Japanned finish. These chains are load tested, but not certified and should never be used for any overhead lifting, load binding or towing applications. Maximum load figures quoted are for guidance ONLY.The Faithfull FAICHCUT25B Black Japanned chain has the following specifications:Size: 2.5mm x 2.5mFinish: Black Japanned
Rivets are generally acknowledged as the most versatile fastening method available with the benefits of secure fixing from one side. The Faithfull Pop or Blind rivets are manufactured from quality aluminium with a steel pulling mandrel. These rivets are suitable for use with most hand riveters and are RoHS compliant for use in electrical appliances.Type: AluminiumDiameter: 3.2mmLength: Short 6mmGrip range: 1-3mmPack qty: 1000
Faithfull Hose Clips are ideal for fixing flexible rubber hoses, plastic hoses and flexible pipes and can be used around the home, in the garden, workshop or the garage, in most applications where a water or air tight seal is required. The non-perforated worm drive used on these hose clips provides a high thread strength with a smooth running, snag-free winding surface. A hex shaped drive nut allows the use of either a slotted screwdriver, spanner, nutdriver or hose clip driver* when tightening or loosening the clips. The Stainless range of hose clips are manufactured using a marine grade 316 W5 stainless steel and are ideal where a high resistance to corrosion is required. Clips are available in a variety of sizes. * The Faithfull Flexi-drive hose clip driver (product code: FAISDHOSE) is perfect for fitting and removing hose clips. The driver features a full sized, soft-grip, non-slip handle and a flexible drive shaft that allows easy access when removing or fitting hose clips in difficult to reach or offset positions. Screw head size: 7mm.Size: 1.Adjustment: 25 - 35mm.
1 x Loctite Super Glue Power Gel Tube 20g. Loctite Super Glue Power Gel is formulated with cyanoacrylate rubber-infused gel formula, this instant glue allows powerful bonds which are extremely precise even on vertical surfaces and materials requiring high flexibility. Strong resistance with instant strength in a single drop, this super glue ensures durability whilst drying transparently. This multi material glue works on a variety of materials: wood, rubber, plastic* and more. It even works as a leather glue. The adhesive not only withstands strong conditions but is also shock resistant, waterproof and heatproof. Before starting, ensure the surfaces you want to bond are clean, dry and close-fitting. Simply remove the cap and apply a small quantity of the power glue gel to one surface, press both surfaces together immediately and hold them in place until the bond sets. Simple! *except polyethylene (PE) or polypropylene (PP). 20g
Jubilee® Workshop Pack of hose clips ideal as a counter display to either sell the hose clips in singles or as a complete deal, supplied in a plastic case. This Workshop Pack of zinc protected mild steel Jubilee® Clips contains the following popular sizes: 24 x 000 (9.5 to 12mm)32 x M00 (11 to 16mm)28 x 00 (13 to 20mm)13 x 0 (16 to 22mm)14 x 0X (18 to 25mm)12 x 1A (22 to 30mm)13 x 1 (25 to 35mm)7 x 1X (30 to 40mm).
The Jubilee® Handy pack can be used as a counter point of sale dispenser or mobile stock pack. Contains 10 of each of the following: 000, M00, 00, 0, 0X, 1A, 1, 1X, 1M and 2A mild steel clips.
Original Range Jubilee® Clips in zinc protected mild steel are the most popular clips in Jubilee's range. They are ideally suited for most day to day requirements for joining hose in areas such as the automotive industry and the automotive aftermarket, agricultural applications, such as irrigation and farm machinery, pneumatic and hydraulic applications in the industrial sector, hardware/DIY applications and in construction. Jubilee® Clip point of sales dispensers provide counter top and wall mounted displays for trade counters, as well as holding a small stock of Jubilee® products in one convenient place. The Jubilee® Clip Dispenser comes with 100 Jubilee® Clips, ten each of the most popular ten sizes of clip covering an adjustment range from 9.5mm up to 50mm and also includes three Jubilee Flexidriver® tools. Contents:10 x each Jubilee® Clip sizes 000, M00, 00, 0, 0X, 1A, 1, 1X, 1M and 2A3 x Jubilee Flexidrivers®.
Everbuild 507 Rendagrip is an extra grip render bonding agent that contains a fine aggregate to provide an improved key before applying render on external surfaces e.g. concrete, lightweight blockwork, brick etc. The fine aggregates are suspended in a unique waterproof polymer to ensure easy application by roller or brush and an even spread of aggregate avoiding any weak spots in the key coat and preventing the aggregate particles coming loose during application. Rendagrip reduces the porosity/suction of the base substrate and provides a mechanical key from the fine aggregate suspended within the product. Size: 10 litres.
This Pack of Gripit Red Plasterboard Fixings contains: 100 x Gripit Red Fixings100 x Screws 5.0 x 30mm Gripit Plasterboard Fixings are designed for use with all types of plasterboard installation. The unique Gripit wings fold out in small cavity spaces to create a vice-like grip. Gripit Red Fixings allow you to fix large shelves to plasterboard walls. One Gripit Red holds up to 74kg. Easy to install, you will require an 18mm drill bit. They are also removable and reusable. Each Gripit Red is supplied with a 5.0 x 30mm screw.
The Arrow T50™ Series top quality 0.050 wire staples for T50, T55, T50PBN, HT50P (up to 12mm only), HTX50, ETFX50, ETF50PBN, CT50K, 5700 and 8000.Size 9/16in. Box of 5000 (4 x 1250).
The DEWALT Darlington Trainers have a lightweight synthetic upper with a padded collar and tongue for all-day wearer comfort. The product has a removable comfort footbed and the outsole is made from EVA and rubber, as used in sports technology footwear. They are fitted with a steel toecap that has been tested to 200 joules and an anti-scuff toecap for protection when kneeling and working. EN Test: CE EN ISO 20345-2011Safety Rating: SBSlip Rating: SRA1 x Pair of DEWALT Darlington Safety Trainers UK 11 Euro 45
Suitable for a multitude of tasks in and around the home and workplace. This 19mm wide tape withstands temperatures from -5°C to 60°C. Flame retardant conforming to BS EN 60454, CE and RoHS. Available in a variety of colours.Colour: Yellow.Width: 19mm.Length: 20m.
Thompson's One Coat Water Seal uses a unique micro silicone emulsion to stop water penetration. Apply just one coat directly onto damp surfaces to provide long-lasting waterproof protection within hours. Stops damage caused by freeze and thaw. Reduces efflorescence. Suitable for use on brick, concrete and stone. Specification: Coverage: 4m² per litreFlammability: Flash point above 61°CApplication: Brush or RollerDrying Time: 2 Hours Approx.1 x Ronseal Thompson's One Coat Water Seal 5 Litre
Thompson's Emergency Leak Fix is a high-performance clear sealant, which seals and repairs virtually any exterior surface, providing a long-lasting, highly durable waterproof repair. The unique formulation adheres to most surfaces, even in damp conditions, to form a waterproof seal that remains flexible over time protecting against cracking and splitting. Ideal for sealing doors and windows, the unique formula has been developed to be over-painted with solvent-based or water-based paints and stains. Usage Areas: wood, painted surfaces, glass, PVCu, plastics, brickwork, stone, roof felt, slate, tile and zinc.
