These ForgeFix Multi-Purpose Copper Clout Nails are suitable for use with softwood. They have a slightly larger head that distributes the load directly underneath the top of the nail. Thick sheeting will stay firm and secure. They have a copper finish that ensures the highest possible durability. Used in many roofing applications.These ForgeFix Multi-Purpose Clout Nails have the following specification: Size: 38mmThickness: 3.35mmFinish: CopperBag Weight: 1kg
Forgefix TechFast Metal Roofing Panels to Timber Hex Screws are used to join metal roofing panels to timber frame buildings. They have a specially designed compression control thread to prevent damage and denting of panels. No pre-drilling is required and the self-drilling T17 Gash Point on screws makes for a rapid installation. The nails are fire and corrosion resistant, protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours. Complies with EU Safety, Health and Environmental requirements. They are supplied with 16mm EPDM rubber washers.These Forgefix TechFast Metal Roofing to Timber Screws have the following specification: Size: 6.3 x 60mmSteel Thickness: 0.5-1.2mmHead Type: 8mm HexPack Size: 100
Faithfull Farmer's Silage Tape is extra wide and made from durable, high strength PVC. Ideal for repair jobs around the farm, including silage patching, electrical insulation and banding. Specification: Colour: Black Width: 75mmLength: 20m
These Forgefix Carriage Bolts are Zinc Plated, and ideal for timber to timber joining. They come complete with a hex nut and are fully threaded to 100mm. Also known as 'Cup Square Hex Bolts', the square underneath the Cup stops rotation of the bolt when tightening. Conform to DIN 603 and DIN 934 standards. Available in a comprehensive range of sizes to suit most applications. APPLICATIONUsed mainly for fastening timber to timber and is extensively used for timber joist construction in house building and numerous decking applications. A Carriage Bolt, also known as a Coach Bolt or as a ‘Fully Threaded Cup Square Hex Bolt’, has a domed or countersunk head, and the shank is topped by a short square section under the head. The square section grips into the part being fixed (typically wood), preventing the bolt from turning when the nut is tightened. A rib neck Carriage Bolt has several longitudinal ribs instead of the square section, to grip into a metal part being fixed. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.Carriage Bolt & Nut ZP M10 x 100 Bag 10
Plasplugs® Thermal Block Fixings cut their own thread in the thermal block to give a superior grip within the 'crumbly' material. For use in: lightweight block, aircrete blockwork, aerated blocks, Thermalite and Celcon. The pack contains an 8mm drill bit and driver. Recommended Screw Size: No.10Pack of 40 Plasplugs® SSCP558 Thermal Block Fixings
Unibond Duct Tape is a multi-purpose, heavy-duty, fabric reinforced tape. It uses a high strength adhesive for a long-lasting hold. The tape is water-resistant and ideal for binding, repairing and reinforcing. It adheres to multi-surfaces. This heavy-duty adhesive tape has hundreds of uses around the home, car and garden and is suitable for both interior and exterior use. No need for scissors as the tape can be easily torn by hand.Size : 50mm x 25m.Colour : Silver.
Jubilee® clips are Kite marked to BS5315 (1991) and the company is licensed to ISO 9001. Made from mild steel, zinc protected and used for fixing flexible rubber hoses, metal tubes etc.Size 12.5Adjustment 286 - 318mmAdjustment 11.1/4 - 12.1/2in
Forgefix TechFast Composite Roof Panel to Timber Hex Screws are used to join composite roof panels to timber frame buildings. The specially designed compression control thread prevents damage and denting of panels. No pre-drilling required, the self-drilling T17 gash point on screws allows for a rapid installation. The screws are fire and corrosion resistant, protected by Elementech corrosion resistant coating, salt spray tested to 1000 hours. Complies with EU Safety, Health and Environmental requirements. They are supplied with 16mm EPDM rubber washers.These Forgefix TechFast Composite Roof Panel to Timber Hex Screws have the following specification: Size: 6.3 x 150mmSteel Thickness: 0.5-1.2mmHead Type: 8mm HexPack Size: 100
These Masterlock Heavy-duty ratchet tie-downs designed to secure luggage or other loads to cars, van roof racks and/or trailers. They are manufactured from very strong webbing material, will withstand all weather conditions and are fitted with an easy-to-use heavy-duty ratchet cam mechanism and J-type hooks. Includes PVC grip on the ratchet and strap trap tie-back for excess strap. TUV certified.The MasterLock Ratchet Tie-Downs with J Hooks and the following specification: Length: 4.5mWidth: 35mm.Load Capacity: 1,250kg. Max. Capacity: 2,500kg.
Master Lock Twin Wire Flat Smooth Bungees help to evenly distribute pressure over loads and offer up to twice the resistance of a traditional bungee cord. 2 reverse hooks allow easy attachment. Resistance: 40Kg. TUV certified.Colour: Red.Length: 60cm. Width: 18mm.
Jubilee® clips are Kite marked to BS5315 (1991) and the company is licensed to ISO 9001. Made from mild steel, zinc protected and used for fixing flexible rubber hoses, metal tubes etc.Size 10.5Adjustment 235 - 267mmAdjustment 9.1/4 - 10.1/2in
These Forgefix Hammer Fixings include both plug and Pozi head screw. The plug is made from Nylon for a longer life and durability and the anti-rotation barbs prevent the plug from rotating in the hole. The fixings are through fixing, eliminating the need for marking and re-positioning. To use, simply drill through both fixture and into the base material and tap in the Hammer Fixing with a strong blow to complete the fix and ensure full expansion. The screw can be released if required. APPLICATIONWidely used for baton, window and door frame fixing. Quick and easy to use - ideal for repetitive installations.Ensure the correct Pozi drive insert bit is used to release fixture and fitting if required.Hammer Fixing & Plug M10 x 160 Bag 10
These Faithfull Welded Chains are manufactured from a mild steel with a Black Japanned finish. These chains are load tested, but not certified and should never be used for any overhead lifting, load binding or towing applications. Maximum load figures quoted are for guidance ONLY.The Faithfull FAICHCUT40B Black Japanned chain has the following specifications:Size: 4.0mm x 2.5mFinish: Black Japanned
These Forgefix double slotted roofing bolts are supplied with square nuts and have a low profile mushroom head. Their bright zinc plated finish increases resistance to corrosion. The bolts are therefore suitable for both interior and exterior use, and can be exposed to weather conditions without the risk of rusting. APPLICATION:Used in many applications other than roofing, when joining products together.Use clearance drill sizes 1mm larger than bolt diameter. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers. With slotted screwdrivers it is important to ensure that the tip matches the width of the screw slot, otherwise you run the risk of damaging the screw head. Slotted screwdrivers are available with either Flared or Parallel tips. For the majority of uses the Flared tip is ideal but if the screw/bolt needs to be driven below the material surface a Parallel tip screwdriver should be used.Roofing Bolt ZP M8 x 50 Bag 25
Forgefix Hex Flange Head Lightning Bolts provide a virtually stress-free fixing for close to edge applications. They are self-threading and allow quick and easy installation of most masonry fixing applications. They can simply be screwed into a pre-drilled hole, without the need for a sleeve or plug. The bolts are through-fixing, eliminating the need for marking and re-positioning. They have a high load capacity due to the thread interlocking into the base material. The flange head acts as a fixed washer, distributing the load under the bolt head. The bolts have an 'Elementech' coating for superior anti-corrosion, which has been salt spray tested to 1,000 hours. Applications: Suitable for most masonry substrates including concrete and brickwork but also for hollow blocks or bricks due to the nature of the thread type anchoring along the total length of the fixing.Specifications: Size: M6 x 100mm.Bag of 10.
These Forgefix Carriage Bolts are Zinc Plated, and ideal for timber to timber joining. They come complete with a hex nut and are fully threaded to 100mm. Also known as 'Cup Square Hex Bolts', the square underneath the Cup stops rotation of the bolt when tightening. Conform to DIN 603 and DIN 934 standards. Available in a comprehensive range of sizes to suit most applications. APPLICATIONUsed mainly for fastening timber to timber and is extensively used for timber joist construction in house building and numerous decking applications. A Carriage Bolt, also known as a Coach Bolt or as a ‘Fully Threaded Cup Square Hex Bolt’, has a domed or countersunk head, and the shank is topped by a short square section under the head. The square section grips into the part being fixed (typically wood), preventing the bolt from turning when the nut is tightened. A rib neck Carriage Bolt has several longitudinal ribs instead of the square section, to grip into a metal part being fixed. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminium and stainless steels by their oxide layers.Carriage Bolt & Nut ZP M6 x 150 Bag 10
The J-B Weld PlasticWeld trade; Epoxy Syringe is a specially formulated two-part adhesive and epoxy filler system which provides strong, lasting repairs. Sets in just 5 minutes. Resistant to water, chemicals and heat. Suitable for use on hard plastics, ABS, Fiberglass, PVC, Glass, Vinyl and other composites. Specifications: Bonding Strength: 3,900 PSI.Set Time: 5 Minutes.Cure Time: 1 Hour.Colour When Dry: Translucent Yellow.Size: 25ml.
The Stanley dual melt, all-purpose glue sticks are suitable for a wide variety of gluing applications to suit most craft, hobby and household requirements.Low setting for bonding paper and heat sensitive products.High setting for china, leather etc. (non-porous products).The Stanley STA1GS20DT Dual Temp Glue Sticks 100mm (4 inch) comes in a pack of 24.
J-B Weld SteelStik trade; Epoxy Putty is hand-mixable, steel-reinforced and non-rusting. It quickly repairs or rebuilds anything made of metal. After mixing, it forms an industrial-strength polymer compound which can be moulded into shapes or used to build up, patch and repair steel components. Can be used on both wet and dry surfaces. Resistant to water, chemicals and heat. Perfect for repairing vehicle exhausts, rust damage and other automotive parts. Specifications: Bonding Strength: 900 PSI.Set Time: 5 Minutes.Cure Time: 1 Hour.Colour When Dry: Dark Grey.Size: 57g.
VELCRO® Brand Stick On Tape is the easy to use alternative to nails and screws. To use, clean and dry both surfaces. Cut tape to length. Peel backing paper and press firmly to surfaces. Allow adhesive 10 minutes to set (or longer for heavier items) before attaching VELCRO® Brand fastening. Supplied as a cut to size roll in white or black. The adhesive reaches maximum strength after 24 hours.VELCRO® Brand Hook & Loop Stick On Tape comes in the following: Colour: Black.Size: 10m x 20mm.
These Forgefix Vine Eyes simply screw into timber and similar materials. Drilling a pilot hole is advisable.The screws are zinc plated for increased resistance to corrosion, and the screw thread is suitable for use with all types of wall plugs. APPLICATION:Vine Eyes are used to attach cables, wires and twine for many numerous applications. Widely used in gardening and agricultural services. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.
These Forgefix Round Head Nails are multi-purpose nails, for use with both soft and hard timber materials. The nails have a 'Bright' finish, which is simply the basic raw mild steel material, without any coating or finish. APPLICATION:These nails are the most popular type of nail, used in many joinery and construction applications.Round Head Nail Bright Finish 150mm Bag of 500g
ForgeFix Concrete Frame Screws are suitable for most masonry substrates including concrete and brickwork. Widely used for batten, window and door frame fixing. These specially designed self-tapping screws are virtually stress free, allowing close to edge applications. Its torx compatible head allows for increased torque control. With a high load capacity with interlocking thread into base material. Through fixing, eliminates the need for marking and re-positioning. Finish: Zinc Yellow Passivated. Box of 100 ForgeFix Concrete Frame Screw ZYP 7.5 x 102mm.
The ForgeFix Spectre Screws are advanced multipurpose wood screws with double countersunk heads and pozi compatible recess. They have a sawtooth thread design to prevent splitting and reamer to prevent jacking. The screws have a zinc yellow passivated finish for excellent resistance to corrosion. The zinc yellow passivation process of electroplating is similar to the 'galvanised' and 'zinc plated' processes but with the addition of a yellow dye. It offers an aesthetically pleasing finish.Specification: Size: 3.5 x 40mmThread: Fully threadedPack Quantity: Box of 200
These Forgefix Annular Ring Shank Nails are ideal for where strength and holding power are of primary importance. The rings on the shank of the nail are sloped in a conical shape to ensure clean insertion but are then extremely difficult to release. They are suitable for both soft and hard wood. The nails have a 'Bright' finish, which is simply the basic raw mild steel material, without any coating or finish. APPLICATION:Used where permanent holding is preferred such as flooring applications.Annular Ring Shank Nail Bright 20mm Bag Weight 500g
Plasplug HW 124 White Single Hollow Door Hook, suitable for hollow doors and partitions, with an integral fixing and screw. Recommended Drill Bit Size: 8.5mm.
The VELCRO® Brand ONE-WRAP® Plant Ties are an easy-to-use, a no knots securing solution for staking and training. It is fully adjustable, durable and reusable. Simply wrap and press to secure, it's soft lining ensures the tie does not cut into the stem as the plant grows. It is weatherproof and supplied as a cut to size roll. The kind and gentle to plants alternative to wire. How to use: Cut to length, allowing sufficient overlap for a secure hold.Wrap tie around plant.For added strength, increase overlap. Specification Size: 12mm x 5m.Colour: Green.
Plasplugs specialised, Hollow Door Fixings are ideal for fitting coat hooks, name plates and other fixings to the narrow gauge of hollow doors and panels. These tough, compact fixings have a rivet type action that grips the inside of the panel. Expanding wings grip securely in hollow doors, thin skin partitions, plywood and fibreglass. Multi-thread technology ensures superior holding power, ideal for the home, boat and caravan. Accepts No. 6 Screws.Drill size: 6mm.
The Weller Electronic Lead-Free Solder is ideal for soldering semi-professional soldering tasks. Sn100Ni+EN ISO 9453. 2.5% Flux EN ISO9454. Specifications: Diameter: 1.0mm.Size: 70g Spool.
Bondloc B542 Hydraulic Seal is a thixotropic liquid which cures anaerobically to form a tough, high pressure seal on all types of threaded couplings used on low, medium and high pressure lines. Used for all types of hydraulic connections, and sealing against typical pressure line ratings. Can also be used to fit valves, threaded couplings, adaptors, quick disconnect parts, compression fittings and vibration proofing joints. Specifications: Resin: Dimethacrylate.Colour: Brown.Fixture Speed No Activator: 10 - 20 mins. Fixture Speed With Activator: <5 mins. Spindle 2 @ 2.5 rpm: 1000 to 2750 cps.Spindle 2 @ 20rpm: 400 to 800 cps.Gap fill: 0.05mm to 0.25 mm.Flash point: >100°C.Shelf life: 2 Years @ 20°C.Specific gravity: 1.06.Max operating temp: -55°C to + 150°C. Cured Performance: Full Cure Time: 12 hours.Typical breakway ISO 10964: 15 N.m.Typical prevailing ISO 10964: >8 N.m.DIN 10964 Breakloose: 24 N.m.DIN 10964 Prevailing: 15 to 35 N.m.Typical Break and Prevailing: 20N.m/15N.m.Bondloc Hydraulic Seal Pneumatic Fittings. Size: 10ml.
These Forgefix Hook Bolts are Zinc Yellow Passivated for increased durability and corrosion resistance. They have a tough and reliable construction to cover most heavy-duty fixing applications. The four-way expansion shield offers extremely strong and secure anchorage, and the specially manufactured retaining spring ensures encapsulation of the wedge during expansion. APPLICATIONHook bolts are commonly used to attach cables to objects for lifting or holding in place.Ensure the correct spanner is used to ensure accurate installation. The Zinc Yellow Passivation process of electroplating is similar to the ‘Galvanised’ and ‘Zinc Plated’ processes but with the addition of a yellow dye. It provides a coating that is aesthetically pleasing, and which offers excellent resistance to corrosion.Hook Bolt Zinc Yellow Passivated M8 Bag 10
Forgefix Hex Head Lightning Bolts provide a virtually stress-free fixing for close to edge applications. They are self-threading and allow quick and easy installation of most masonry fixing applications. They can simply be screwed into a pre-drilled hole, without the need for a sleeve or plug. The bolts are through-fixing, eliminating the need for marking and re-positioning. They have a high load capacity due to the thread interlocking into the base material. The bolts have an 'Elementech' coating for superior anti-corrosion, which has been salt spray tested to 1,000 hours. Applications: Widely used for fixing battens, balustrades, handrails, racking and holding down machinery, plus many more installation applications. Suitable for most masonry substrates including concrete and brickwork but also for hollow block or bricks due to the nature of the thread type anchoring along the total length of the fixing.Specifications: Size: M8 x 100mm.Bag of 10.
These Forgefix Worktop Clamps eliminate the need for surface mounted worktop joining strips. The nut is tightened onto the bolt, pressing the caps against the walls of the 35mm diameter holes.The clamps are Zinc plated for increased resistance to corrosion. APPLICATION:Worktop joints. Zinc coatings prevent oxidation of the protected metal to create a longer lasting finish. It does this by forming a barrier and by acting as a sacrificial anode if this barrier is damaged. Zinc oxide is a fine white dust that (in contrast to iron oxide) does not trigger a breakdown of the substrate’s surface integrity as it is formed. The zinc oxide, if left intact, can act as a barrier to further oxidation, in a way similar to the protection afforded to aluminum and stainless steels by their oxide layers.
J-B Weld KwikWeld trade; Epoxy Adhesive provides strong, lasting repairs to metal and multiple other surface types. Sets within minutes and cures within just a couple of hours. Cures consistently, no shrinkage or foaming. After curing it can be shaped, tapped, filed, sanded and drilled. Resistant to water, chemicals and heat. Specifications: Bonding Strength: 3,127 PSI.Temperature Resistant: up to 148 deg;C (300 deg;F).Set Time: 6 Minutes.Cure Time: 4-6 Hours.Colour When Dry: Dark Grey.Size: 2 x 30ml.
